Create PO with the check box of free item selected automaticly

Hi all,
We would like to create PO's with a normal position and a second position which is free.
Is there a possibility to have a special position type for free goods?
We don't want to check this checkbox every time we create a PO...
Thanks,
Thomas

hi,
Indicator is not possible to get based on the position in the PO..
You can get the indicator defaulted via maintaining the indicator in MMR and then considering the same material while maintaining the PO.
Regards
Priyanka.P

Similar Messages

Help with the check box.

Hi,
I have a question with the Checkbox. I am using Apex 4.0.
I have 5 checkboxes and using the Lovs I have given values to each check box.
When I select the checkboxes and submit, the values are inserted into a single column.
Example
Consider CB as check box
CB1 1
CB2 2
CB3 3
CB4 4
CB5 5
When I Select CB1, CB4, CB5 In database it stores as 1:4:5 But, I need it to be stored as 10045 format. Like if I select CB2,3 5 then it should be stored as 02305
The return value of the checkbox should be displayed along with the other unselected values as 0s as told in the above format.
Can anyone help me with this.
Thanks,
Rik

If you want to show the value on screen(can't set it to the same checkbox item)
checkbox_item_name = 'P133_CHECK'; //checkbox item name
checkbox_value_item_name = 'P133_CHECKBOX_VALUE'; // Item which has the checkbox value concatenated 0 for not checked and checkbox value when checked
$('#'+checkbox_item_name).find('input[type=checkbox]').click( function(){
var val = '';
$('#'+checkbox_item_name).find('input[type=checkbox]').each( function(){
if ( $(this).is(':checked') ){ val+= $(this).val(); }
else { val+=0; }
$s(checkbox_value_item_name,val);
If you want to just use the value in PLSQL, it is much more simpler
Create a Dynamic Action that is triggered "*before page submit*"
Execute JS code
checkbox_item_name = 'P100_CHECK'; //checkbox item name, change it appropriately
var val = '';
$('#'+checkbox_item_name).find('input[type=checkbox]').each( function(){
if ( $(this).is(':checked') ){ val+= $(this).val(); }
else { val+=0; }
$s(checkbox_item_name,val);Now when the checkbox submits, the checkbox item would have the concatenated value as required.

How to with the check box in Suppliers - Contact Directory

EBS R 12.
I am in need of finding a solution for the following:
Payables Manager -> Suppliers -> Inquiry -> Select a supplier -> Go to "Contact Directory" -> Select a contact
Under User Account section there is a check box.
When I check the check box, the following action should happen:
1. The "Username" field must contain the value of the "Email".
2. Under "Responsibilities" "Sourcing Supplier" must be checked.
I don't know where to put my hands to solve this problem.
All helps will be appreciated. Thanks.

Hi
SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
Then activate the auto PO creation in Vendor master - Purchasing view
Check it out.
Regards,
raman

ADF Tree with Boolean Check Box: How to find selected items

Hi Experts,
ADF: 11.1.1.5.0
WLS: 10.3.6
I am using an ADF Tree which contains elements at two levels (say Departments and Employees). My requirement is to give provision for user to select Departments and Employees using the check boxes. User should be able to select what ever Departments he/she likes and what ever employees he/she likes. There should not be a provision to select Employee with out selecting the corresponding Department (root node in the tree).
I am facing the below issues while trying to implement this use case:
1. Always, only the first master record will be expanded by default (I am using "Display Row" property value as "default" and "ExpandAllEnabled" as "true"). My need is to expand all the master records by default. So that user need not explicitly expand each master record node and then select the associated child records.
2. Currently, I am using value change listener associated to af:selectBooleanCheckBox to identify the Departments and Employee records that have been selected. Since not all departments (masters) are expanded by default, if user selects the check box of department (master) and then expands the department node, automatically all the employees of that department are selected. But, this event is not triggering the value change listener for the employee records. Because of this, after a department node is selected and then expanded, all the child elements' check boxes are selected but the events are not generated. Hence, I am not able to capture the selection of employee records.
To summarize,
1. Please let me know how to expand all master nodes in af:Tree by default.
2. Please let me know the best approach to identify the selected items (both master and detail items) in the af:Tree component using af:selectBooleanCheckBox.
Thanks in advance,
Rathnam

Hi,
Can you please elaborate the solution? I have a similar problem in
https://forums.oracle.com/thread/2579664

Very elementary....what is the check box for in itunes?

Would someone please enlighten me on the functionality of the check boxes next to items in itunes? I check several songs I want to delete and then click Edit>Delete but only the ONE ITEM selected by the cursor is deleted. OK, so I know how to do shift-click to select a number of items then click Edit>Delete, but what in the dog-gone world is the check box for?!? when I search for help on "Check Box" no results are found. Also, if you like to show me how non intuitive I am by demonstrating how to find this solution in the Help menu, I would love to learn something from the exercise. Otherwise, I'm going to believe, beyond belief, that the itunes help is not very helpful!
Thanks, inspite of this insanely simple problem!
Alan

you can multiple select songs from your list by using the CTRL or SHIFT keys, and then you can right-click on the selected items and choose delete.
the check box is actually for auto-syncing; which means that if you have some songs checked in your library, then you connect your ipod, those checked songs will automatically update on your ipod, or transfered. (of course, thats only true if you have the auto-sync option selected, and not manual update).
another thing for the checked box; if you change anything to the song like ID tags, or artwork, .... they will automatically be changed and updated on that song on the ipod next time you plug it in.
i found out that this check box thing is useful if you wanna update your ipod ONLY with the new songs added recently to your library. this way, your ipod wont update all songs, it will only do the ones checked.
you can also right click on a bunch of songs and choose check selection, or uncheck selection.
hope i didnt forget anything, and i hope that helps.

Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

How to change the check box with the push button in itrator table rows

Hi all,
I want to change the check box of the itrator table rows with push button/ some thing better as to give
the table view more good look and user friendly.
Does any one has tried any other option in table view in place of check box
Thanks
Bhagat

There are various objects which you can create via iterators. Please see the application SBSPEXT_TABLE for more details.
DATA: lo_text      TYPE REF TO cl_htmlb_textview,
        lo_ddlb      TYPE REF TO cl_htmlb_dropdownlistbox,
        lo_input     TYPE REF TO cl_htmlb_inputfield,
        lo_button    TYPE REF TO cl_htmlb_button,
        lo_chk_bx    TYPE REF TO cl_htmlb_checkbox.
row_ref = p_row_data_ref.
CASE p_column_key.
    WHEN 'EFF_DATE'. " Input field
      CREATE OBJECT lo_input.
      lo_input->id       = p_cell_id.
      lo_input->type     = 'DATE'.
      lo_input->showhelp = 'TRUE'.
      lo_input->width    = '60'.
      lo_input->invalid = 'true'.
      p_class            = `ao`.
      lo_input->value     = get_column_value( p_column_key ).
      p_replacement_bee = lo_input.
    WHEN   'NEW_LOC'. " Drop down list box
      CREATE OBJECT lo_ddlb.
      GET REFERENCE OF gt_persa INTO lo_ddlb->table.
      lo_ddlb->id                = p_cell_id.
      lo_ddlb->nameofkeycolumn   = 'NAME'.
      lo_ddlb->nameofvaluecolumn = 'VALUE'.
      lo_ddlb->selection         = get_column_value( p_column_key ).
      lo_ddlb->selection = 'DUMMY'.
      p_replacement_bee          = lo_ddlb.
    WHEN 'MON' . " Check box
      CREATE OBJECT lo_chk_bx.
      lo_chk_bx->id = p_cell_id.
      lo_chk_bx->checked = get_column_value( p_column_key ).
      p_replacement_bee = lo_chk_bx.
    WHEN 'NEW_MGR_SRCH'. " Button
      CREATE OBJECT lo_button.
      lo_button->id            = p_cell_id.
      lo_button->text          = 'Search Mgr'.
      lo_button->onclientclick = 'script'.
      p_replacement_bee = lo_button.
    WHEN OTHERS. " Text
      CREATE OBJECT lo_text.
      lo_text->id       = p_cell_id.
      lo_text->wrapping = 'FALSE'.
      lo_text->text     = get_column_value( p_column_key ).
      lo_text->design   = 'STANDARD'.
      lo_text->textcolor = 'POSITIVE'.
      p_replacement_bee = lo_text.
ENDCASE.
Thanks
A

How to name the Check Box as "Want Free Gift" using PARAMETERS statements

Hi all,
I am new to check boxes. I have a existing report where I have to add a check box to the selection screen.
So i said
PARAMETERS: p_cncldc AS CHECKBOX.
everythibng is fine and I get the check box on the selection screen. when i execute the report i get the name of check box as p_cncldc. but i want the name of the check box as "Want Free Gift".
How to name the check box as "Want Free Gift".
if i am saying
PARAMTERS: Want Free Gift AS CHECKBOX. it says a syntax error saying it canot be more that 8 chars.
Some one please help. I am new to Check boxes
Regards,
Jessica Sam
Edited by: jessica sam on Mar 31, 2009 10:37 PM

Text on the Right hand side of check box.
selection-screen begin of block b1.
selection-screen begin of line.
parameters: w_check as checkbox.
selection-screen: comment 4(30) TEST .
selection-screen end of line.
selection-screen end of block b1.
INITIALIZATION.
test = 'Want Free Gift AS CHECKBOX'.
Text on the Left hand side of check box.
selection-screen begin of block b1.
selection-screen begin of line.
selection-screen: comment 2(30) TEST .
parameters: w_check as checkbox.
selection-screen end of line.
selection-screen end of block b1.
INITIALIZATION.
test = 'Want Free Gift AS CHECKBOX'.
OR:
GOTO(Menubar)>Text Elements>Selection Texts
Regards,
Gurpreet

I keep getting the message: "what should firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.

How to create the Check box and Text Area inside the Assignment block

Dear all,
        I am new to web UI development. my requirement is to create the Check box and Text box in the Assignment block. Can anyone help me to do this requirement.
Thanks & Regards,
Ashok.

Hi,
Please place the below code in the GET_P methods of the fields.
For Text Area
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_textarea.
ENDCASE.
For Check Box
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_checkbox.
ENDCASE.
Regards,
Lakshmi.Y

Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

How do we check the check box items based on the databse fields.

Hi All,
I have a requirement like as mentioned below#
1. I have a combox box whcih i will be populated from database.
2. I have created two check box as "Stategric " and "Non Stategric".
3. Now when i select the combox box condition i need to select the check box items.
4. But the problem is i wil be knowing weather it is a stategric or Non stategirc based on the database column.
5. How do i need to map the database point of view and correlacte with javascript pont of view.
6. Do we need to write any Application process to achieve this task and who we can do that.
Thanks,
Anoo..

Hi VC,
As per my understanding the code should be placed between --.
Based on this i have placed the code
function setCheckbox(pThis, pItem){
alert('inside');
 var l_code = '';
 // Get checkbox name
 rName = document.getElementsById('P1_ENG_BAU').firstChild.name;
alert("The value is"+rName);
 // Fire AJAX
 var get = new htmldb_Get(null,html_GetElement('pFlowId').value,'APPLICATION_PROCESS=CHECKBOX_LIST',0);
 get.add('F120_COMPANY',pThis.value);
 gReturn = get.get('XML');
 if (gReturn) {
 var values = gReturn.getElementsByTagName('value');
 var messages = gReturn.getElementsByTagName('message');
 // Build the checkbox
 for (i=0; i<values.length; i++) {
 var rValue = values.firstChild.nodeValue;
var rMessage = messages[i].firstChild.nodeValue;
l_code+='<input id='+P1_ENG_BAU+'_'+i+' type=checkbox value='+rValue+' name='+rName+'>';
l_code+='<label for='+P1_ENG_BAU+'_'+i+'>'+rMessage+'</label>
document.getElementsById('P1_ENG_BAU').innerHTML = l_code;
Correct me if iam understanding is wrong.
Thanks,
Anoo..
Edited by: Anoo on May 31, 2012 11:04 AM

By clicking on a button all the check boxes i have should be checked

Hi all,
Im having a button 'SELECT ALL', by clicking on that all the check boxes i have in my view should be checked.
Help me out with procedure and the sample code.
Thanks & Regards,
Suresh

Hi Sureshkumar,
1. Create a value attribute named select of type boolean.
2. Bind the checked property of all the checkboxes to this attribute.
3. Create an action called click and bind it to OnAction event of the button(whose click will check all the checkboxes) and write this code in that action.
wdContext.currentContextElement().setSelect(true);
Warm Regards,
Murtuza

Linking/Grouping Text Fields with a Check Box Field

Disclaimer: I know nothing about coding/scripting in Acrobat (or in any language, for that matter).
I have 4 sets of text fields, call them A, B, C, and D. All of the fields in set A will have a value entered. There are 10 fields in set A while sets B, C, and D may have as many as 104. Sets B, C, and D will always have a one-to-one-to-one correspondence with each other (B1 is associated with C1 and D1 only and so on). My dilemma/desire is two fold:
First:
I want to be able to group 3 to 4 of the fields in set C if I tick a check box/radio button/whatever field type works. When the fields are grouped, I want their values to be the same within the grouping. These fields should also be ungrouped when the marker field is unchecked/deactivated. No field will ever be in any more than one group.
Second:
I want values for set B to equal a value of set A if there is a value entered in that B's corresponding C field.
Please don't hesitate to point out where I can make any of this clearer.
Thank you in advance,
Joseph
P.S.
If one or both of these is not doable in Acrobat, would you please kindly point me to a program that can do this?

Steve,
Sorry, I referenced InDesign and this file was created in Illustrator. (I have been working with numerous files created in both InDesign and Illustrator, with numerous challenges). I do not have the native document nor Illustrator software, only Acrobat. When I previously loaded the InDesign-created pdf file(s) into Acrobat, I was unable to use the Text TouchUp Tool because I do not have the fonts on my system that were used to create the documents in InDesign, thus I am denied access to the text. With this file, created in Ilustrator; I assume because the text resides within the image created that encompasses the entire page, the Text TounchUp Tool and Object Tool have no response when I click on the page after activating the tools with a click, although the Tool Bar allows me to click on the icons to activate the functions.
I have read elsewhere that InDesign and Illustrator files are exported as images, thus requiring either Photoshop or Illustrator to fully edit outside of the originating software. However, I was hoping that I could create interactive forms by overlaying fields with Live Cycle Designer - I did not anticipate the default setting of the check box labels being unchangeable. Sounds like I am at a dead-end with this issue??
Linda

Need help in LiveCycle Forms - Highlighting required fields when the check box is checked / Un-highlighting the fields if I un-check the check box...

Hello All!
I am relatively new to creating forms within LiveCycle but I have learned quickly so bare with me on my question.
I have figured out how to highlight a field when a check box is clicked on, however, I cannot get it to remove the highlight when the check box is unchecked?
This is what I used for the highlight:
Subform1.fieldname.fillColor="255,255,0"
Can anyone provide any insight or suggestions on how I might fix this script issue?
Thanks in advance!
-Lisa

Hi,
Script migth be something like this. Put it on Change event of the check box
if (this.rawValue == 1) { Subform1.fieldname.fillColor="255,255,0"
xfa.layout.relayout();
else
{ Subform1.fieldname.fillColor="255,0,0"
xfa.layout.relayout();
BR,
Paul Butenko

Create PO with the check box of free item selected automaticly

Similar Messages

Maybe you are looking for