Create product and product category

hi,
can anybody explain me how to create product and product category in gateway services.
thanks&regards in advance,
Haritha

Hello Haritha,
I do not know about the logic which are supposed to be used to accomplish ur business scenario.
But Once u know the underlying code/standard FM to be used, then u can follow the below which will help u get info on how u can consume those business logic inside GW and expose it as service.
1.Let’s code CRUDQ and Function Import operations in OData service!
2. How To Batch Multiple Operations Into A Single Request
3.How To... Create Complex Business Entities using the Gateway OData Channel
4.Purchase Order: Create OData Service in the SAP NetWeaver Gateway System for CRUDQ Operations
5. Implementing Expand Entity/Entity Set
6. Detailed step by step procedure for Creating Gateway Service with all the CRUD Operations and testing them in Service Explorer Part1
7. Step by Step development for CREATE_DEEP_ENTITY operation
U can also search in the forum for additional info as well.
Regards,
Ashwin

Similar Messages

Parent Product and pruduct category

I know how to use product category, but i don't know how to use Parent Product.when i created a server request ,they gave the answer
is:+Parent Product is a System Defined read-only picklist which shows all the Products listed for your company. You can create additonalProducts and select any existing product as the Parent product.However, it is not mandatory that each newly created products should have a Parent Product associated.+ but this answer doesn't help me. what i want to know is when i need to add a Parent Product field and what is the different between Parent Product and Product Category?

Hello Jamal,
In txn:COMMPR01,you can see the Item Category Group under Sales and Distribution tab,under Sales:Control Fields,Quantities.
With the help of the item category group, you review the various products from a business view for item category determination. Enter the item category group for each product in the product master.
During business transaction processing, the system creates the item category from the item category group for the product, and from the business transaction category, and proposes it in the document. You can assign item categories to business transaction types and item category groups in the process Maintain item category determination.
So for a product you need to assign it during the product creation and then only this product would be available for selection in transaction depending upon the item category determination.
Hope this helps!
Best Regards,
Shanthala Kudva

Can Tcode exist in Pre-production and Production without transporting it...

Hi ABAP Guru's,
Can a T-code that has been created in Development system saved in a package be available in Pre-production and Production environment without transporting it.
Apt answers will be rewarded.
Raghav

Hi,
I hope it is not possible in normal scenario. But it is possible if below thing has happend.
eg: U created a transport in development system and assigned to some package/development class.
If some one created another TR and transported the whole package to quality/production then your transaction code will also be tranported but ur TR will not be. This i am not sure. But still....i think this can happen.
Check the above thing if it has happend.
Thanks,
Vinod.

New tab for Contract for data about products and product sales.

Looking for ideas to implement a new tab on the Contract (RECN)
We have some basic data about products and product sales that we want to have implemented on a screen tab for a contract. The user needs to be able to enter information about a product, quantity, year grown, and tax info. And then each of these products may have one or many sales records showing date of sale, quantity sold, and a brief note.
So a contract can have 1 or many products and a product can have one or many sales records.
The user needs to be able to enter, update and delete any one of these records. And, ideally, enter multiple of each before saving.
Do any of you have ideas about how to go about this? Using ALV grids? or table controls? I'm still wet behind the ears regarding doing screen development in SAP so am open to any and all suggestiions.
SAP 6.4 is the version we are at.
Thanks
Laurie

Maybe the original order to renew and keep unlimited data was cancelled because it was not an option. It wasn't a "bait-and-switch" The order was cancelled, it wasn't switched. When you called to reissue the order they told you the correct options so they did not switch you without your knowledge. The second rep was correct, he didn't lie, the first rep did. Verizon cancelled the order because if they didn't you would have been set up w/ new 2 year agreements on a tiered data plan, which would have been illegal. Thats why they cancelled it. So you can either not make the change, keep the unlimited data and buy the phones outright. Or switch, go to a tiered plan, and get new phones. By glitch they meant the system accidentally allowed you to keep the unlimited plan, though it was not an option. Verizon has had this rule since they removed the unlimited plan back in '11.
<< Full name of rep removed >>
Message was edited by: Verizon Moderator

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

How to automatically update products and product categories?

Hi friends
How to automatically update products and product categories.Is it possible?
regards
venkat

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
Also refer the foll thread:
Material group from R/3 to COMM_CATEGORY (SRM)
Related notes : OSS notes 872819 and 720819.
BR,
Disha.
DO reward points for helpful answers.

Classic scenario, where to create Contract and product category

Hello All,
We are using SRM4.0 ( Classic scenario) with non-sap backend system.
We need to attach contract in Shopping cart in SRM.
My questions are:
1. In which system ( EBP or non-sap backed), we need to create contract? and how to create it?
2. In which system( EBP or non-sap backend), we need to define product or product category? and how to create it?
Regards
Neelesh

Neelesh
When you replicate product categories from any backend system, they get created in SRM and update the value of logical system with the backend from which it replicated.
You can only create Product category in standalone. You can try to create the same for classic but maintain log syst value with the correct backend. This is not advisable.
PS : Reward points if helpful.
Regards
Jagadish

T code for material production and production

Hi,
Could any one please tell me the *t-code* to find out monthly/ daily material wise production and consumption report in value and qty as well
Regards / Ashok verma

Dear Ashok Kumar,
Check the reports,
MCP3,MCPM - for the actual production happened for a period,you can get it daywise for any product.
MCRP,MCP6,MCRE - Actual consumption of materials during a period for production.
MB51 - you can get the list of 201 movement(In case if any material is issued against cost center).
Check and revert back.
Regards
Mangalraj.S

ORACLE.FDK.ServerError while creating document and assigning category

Hi,
I try tro create a new Document in Content Services and assigning an existing category
here is the code snippet:
public static Item createDocumentWithCategory(Item parent, Item category)
throws FdkException, RemoteException
// get the Manager instances
FileManager fm =s_WsCon.getFileManager();
System.out.println("Ok document");
RechercheCategorie categorie=RechercheCategorie();
categorie.catValeur2();
Item cat=categorie.getCat();
Item workspace =fm.resolvePath("/solaria/E-TOP2", null);
System.out.println("id dans create document:"+cat.getId()+"workspace name:=
"+workspace.getName()+ "workspaceid:"+workspace.getId());
// create Category definition for category instance
NamedValue[] categoryDefs =WsUtility.newNamedValueArray(new Object[]=
{ Options.CATEGORY_ID, new Long(cat.getId()) }/*,
{ Options.CATEGORY_DEFINITION_ATTRIBUTES,
WsUtility.newNamedValueArray(new Object[][] {
{ "CUSTOM_Attribute", "Value One" } }) }*/
System.out.println("Ok document");
// create document specifying category definition
Item newDoc =fm.createDocument(
WsUtility.newNamedValueArray(new Object[][] {
{ Attributes.NAME, "MyDoc41" },
{ Options.CATEGORY_DEFINITION, categoryDefs },
{ Options.DESTFOLDER, new Long(workspace.getId()) } }), null, null);
System.out.println("Ok document2");
return newDoc;
It throws an Exception essage d'erreur:
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:=
faultString: ORACLE.FDK.UnexpectedError:ORACLE.FDK.ServerError
faultActor:=
faultNode:=
faultDetail:=
{http://xmlns.oracle.com/content/ws}fault:<detailedErrorCode xsi:type="x=
sd:string">ORACLE.FDK.ServerError</detailedErrorCode><errorCode xsi:type=
"xsd:string">ORACLE.FDK.UnexpectedError</errorCode><exceptionEntries xsi:ty=
pe="ns1:ArrayOfFdkExceptionEntry" xsi:nil="true"/><info xsi:type="ns1=
:ArrayOfNamedValue" xsi:nil="true"/><serverStackTraceId xsi:type="xsd:s=
tring">139-1170838513360</serverStackTraceId>
What is wrong with the code?
Please advise
Jo

The stack trace is incomplete. Please post the complete exception stack trace.
regards,
-sancho

HT1212 I am trying to restore my ipad (disabled and connect to itunes), but when going through the steps, it's asking me for my passcode. I can't put that in because it's disbled. This is the WORST product and product instructions I have ever dealt with

My ipad is disabled and it tells me to connect to itunes. However, once I've connected to iTUNES, it ask me for my passcode and of course, I can't put that in because my ipad is disabled. I am ready to throw this iPad out the window. Wll never buy another one.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Development and Production SLDs

We have completed Development and testing of XI objects and are at a stage to transport the objects to Production. We have two SLDs for XI, one for Non-productive systems and another for the Prod system. As regards to SLD entries for transport to Production, I though the following is the process
1. Create Production Business systems in DEV-SLD putting them in the right Business group
2. Export DEV-SLD entries
3. Import the file into PROD-SLD
4. After go-live only delta SLD entries would be exported and imported into PROD-SLD
In the following Weblog, /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation, Yuvaraj talked about SLD data supplier bridge from Dev SLD to Production SLD. Is this absolutely necessary? With the bridge operating, what happens if somebody deletes a business system by mistake in Dev SLD?
Any inputs would be appreciated and rewarded

Bhavesh,
My reason for not having prod entries on Dev SLD is that if Prod Entries are going to be on dev SLD, then why have a separate SLD for Prod itself?
My logic for this would be during development, create all the Production Business Systems in DEV-SLD and transport them to PROD-SLD. At runtime system uses Prodcution-SLD. I guess the differernce is design time vs Runtime.
But once again, SAP recommends a single SLD and so when the landscape contains multiple SLD's there are no rules on how to go about this and so either way things will work fine :-)
SAP's recommendations seem to have changed off late. Though in online help they have again and again mentioned that one SLD is recommended, I do know that some internal SAP Consultants recommending separate SLDs for non-productive and productive purposes. There are also documents on Service market place providing information on how to set-up two SLDs for productive and non-productive purposes.

Co products and by products

Hi,
I have a scenario where in during a production of main Finished Material, two co products will come out. These products undergo further processing and they can be sold and also these two co products are used to produce one more material (by product) which is sold as well used in the production of main Finished material.
processing of co products and production of by product take place separately in other production machines/units.
can someone please suggest how i can map this scenario? and in this situation how the BOM is created??
Regards,
Pavan

Hi Prasobh,
Material "A" is the main finished material which uses production unit "01" to produce.
During production of "A", materials "B" and "C" will come out as a co products.
Material "B" is further processed in production unit "02" and material "C" is further processed in production unit "03" to make them as sell able and usable materials.
Again material "B" and "C" are used to produce material "D" which uses production unit "04". Material "D" is also sold and
This material "D" in small quantities used in the production of main material "A".
I can get production requirement for material "A" only.
All production units are located in the same premise.
The scenario is bit complex, above explanation may give some clear picture to you.
Pavan

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

Replication of product master and Product category

Hi
Please let me know steps involved in replicating
Product master and product category from R/3 to SRM
Regards
Ashish

Hi Ashish,
The blogs mentioned by Kathirvel explains clearly the entire replication procedure of Master data from R/3 to SRM.
Neverthless find some points which needs to be taken care during replication :
1. Ensure that the tables CRMCONSUM, CRMSUBTAB, CRMPAROLTP, CRMRFCPAR are duly filled in R/3 system.
2. Endure that SMOFPARSFA table is duly filled in SRM system.
3. Maintain the filter settings using R3AC3 and R3AC1 as per your requirement in SRM system.
4. Set up the Administrative console using SMOEAC and create both R/3 and SRM nodes and define the site attributes.
5. Ensure that all the queues (both inbound and outbound) are empty in both the systems before replication.
6. Start initial load of customizing objects (DNL_CUST_BASIS3, DNL_CUST_PROD0 & DNL_CUST_PROD1) using R3AS and monitor the loaded jobs using R3AM1.
7. After successful replication of customizing objects, load the business objects (material_master, service master) using R3AS.
8. The replicated material groups and product types can be seen using COMM_HIERARCHY txn.
9. The replicated materials can be seen using COMMPR01.
Hope this makes you more clear about the settings required.
Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Significance of IBase, Component and Product ID while creating Change Reque

Hello,
When we create a change request via SOLMAN_WORK_CENTER, we are supposed to provide values for
1) IBase
2) Component
3) Product ID
Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
Can the value for IBase obtained via SMSY t code also?
What does component and Product ID signify?
Where can we get values for Component and Product ID?
Is Product ID the same as value we get from menu Option System->Status->Installation Number
Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
If Not, how will SolMan identify which system the change should point to?
Or only value for Ibase is enough?
Thanks,
Vikas

Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
Can the value for IBase obtained via SMSY t code also?
No
What does component and Product ID signify?
Product ID is not mandatory. I actually hide it in the CRMD_ORDER screen.
Where can we get values for Component and Product ID?
Is Product ID the same as value we get from menu Option System->Status->Installation Number
Component - IB52 as you already mentioned
Product ID - in a customizing table, I've seen it once but can't remember where honestly. As stated, I don't bother with the field
Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
The iBase and component are mandatory, odd thing is if you enter the component without entering 1 in the iBase, SolMan will fill the 1 in for you.
If Not, how will SolMan identify which system the change should point to?
By the logical components assigned to your maintenance project. You can actually have transports for more than one production assigned to your change document. For instance you could have a BI and ECC transport assigned to the sane change document. Your tak list will have the dev, testing and production systems for each logical component assigned.
Or only value for Ibase is enough?
I was having this discussion with someone the other day. Since the logical components assigned to the mianteance project really determines what systems you can create transports for, what is the value of the component field? Best I could determine was when you use the Logon on to System action, it points to the one listed in the component field only. other than that, I'm not sure.

Create product and product category

Similar Messages

Maybe you are looking for