Create sql view from linked server ?

server1.database1.dbo.table1
Table1 contains columns
Name, Author, Date, Quantity
server2.database2.dbo.table2
Table2 contains columns
Id, Author
How can I create a view on server2 that cointains all data from
server1.database1.dbo.table1, but instead of value of column Author,
I need a value of column Id ?

Try the below :Its a sample method, you can use it in your actual code.
--My local server,I created tablecreate table statuses(filestatus int)
Insert into statuses Select 1--Created a view locally to access the objects from other server.--You need to qualify the object as server-db-schema-objectname as below--join these two tables in the view.
create view test_view
as
Select B.filestatus,A.filestatusdesc From <Linkedserver>.<DBName>.<schema>.<objectname> A
Inner join statuses B on A.filestatus =B.filestatus
--Execute the below to get the records from different server
Select * From test_view

Similar Messages

Privilege for creating a View from a Stored Procedure

Hi,
                     I need to create a view from a procedure. I could do it from an anonymous block whereas I am unable to do that from a Stored Procedure. Should I need a specific privilege for performing this operation? If so what would be the reason behind it? Will that privilege be given in production databases?
Code to replicate:
CREATE TABLE t11 AS SELECT * FROM DUAL;
CREATE OR REPLACE PROCEDURE p_etl_test_view
AS
BEGIN
   EXECUTE IMMEDIATE 'CREATE OR REPLACE VIEW v_t11 AS SELECT * FROM t11';
END;
PROCEDURE P_ETL_TEST_VIEW compiled
Elapsed: 00:00:00.131
BEGIN
   EXECUTE IMMEDIATE 'CREATE OR REPLACE VIEW v_t11 AS SELECT * FROM t11';
END;
anonymous block completed
Elapsed: 00:00:00.069
BEGIN
   p_etl_test_view;
END;
Error starting at line 13 in command:
BEGIN
   p_etl_test_view;
END;
Error report:
ORA-01031: insufficient privileges
ORA-06512: at "OCCSS_ENTMT_HK_DEV_01.P_ETL_TEST_VIEW", line 4
ORA-06512: at line 2
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
           without the appropriate privilege. This error also occurs if
           attempting to install a database without the necessary operating
           system privileges.
           When Trusted Oracle is configure in DBMS MAC, this error may occur
           if the user was granted the necessary privilege at a higher label
           than the current login.
*Action:   Ask the database administrator to perform the operation or grant
           the required privileges.
           For Trusted Oracle users getting this error although granted the
           the appropriate privilege at a higher label, ask the database
           administrator to regrant the privilege at the appropriate label.
Elapsed: 00:00:00.100
The privileges I am having:
SELECT   *
    FROM dba_sys_privs
   WHERE grantee = 'OCCSS_ENTMT_HK_DEV_01'
      OR grantee IN (SELECT granted_role
                       FROM dba_role_privs
                      where grantee = 'OCCSS_ENTMT_HK_DEV_01')
ORDER BY 1;
GRANTEE
PRIVILEGE
ADMIN_OPTION
EXP_FULL_DATABASE
ADMINISTER RESOURCE MANAGER
NO
EXP_FULL_DATABASE
ADMINISTER SQL MANAGEMENT OBJECT
NO
EXP_FULL_DATABASE
BACKUP ANY TABLE
NO
EXP_FULL_DATABASE
CREATE SESSION
NO
EXP_FULL_DATABASE
CREATE TABLE
NO
EXP_FULL_DATABASE
EXECUTE ANY PROCEDURE
NO
EXP_FULL_DATABASE
EXECUTE ANY TYPE
NO
EXP_FULL_DATABASE
READ ANY FILE GROUP
NO
EXP_FULL_DATABASE
RESUMABLE
NO
EXP_FULL_DATABASE
SELECT ANY SEQUENCE
NO
EXP_FULL_DATABASE
SELECT ANY TABLE
NO
OCCSS_ENTMT_HK_DEV_01
CREATE DATABASE LINK
NO
OCCSS_ENTMT_HK_DEV_01
CREATE TABLE
NO
OCCSS_ENTMT_HK_DEV_01
DEBUG CONNECT SESSION
NO
OCCSS_ENTMT_HK_DEV_01
SELECT ANY DICTIONARY
NO
SCB_SCHEMA_ROLE
ALTER SESSION
NO
SCB_SCHEMA_ROLE
CREATE CLUSTER
NO
SCB_SCHEMA_ROLE
CREATE DIMENSION
NO
SCB_SCHEMA_ROLE
CREATE INDEXTYPE
NO
SCB_SCHEMA_ROLE
CREATE JOB
NO
SCB_SCHEMA_ROLE
CREATE MATERIALIZED VIEW
NO
SCB_SCHEMA_ROLE
CREATE OPERATOR
NO
SCB_SCHEMA_ROLE
CREATE PROCEDURE
NO
SCB_SCHEMA_ROLE
CREATE SEQUENCE
NO
SCB_SCHEMA_ROLE
CREATE SESSION
NO
SCB_SCHEMA_ROLE
CREATE SYNONYM
NO
SCB_SCHEMA_ROLE
CREATE TABLE
NO
SCB_SCHEMA_ROLE
CREATE TRIGGER
NO
SCB_SCHEMA_ROLE
CREATE TYPE
NO
SCB_SCHEMA_ROLE
CREATE VIEW
NO

BoopathyVasagam wrote:
Thank you for your answer. So should I issue the below statement? (Since I dont have dba privs i couldn't test this)
GRANT CREATE VIEW to P_ETL_TEST_VIEW;
I doubt that above will prevent the error from being thrown.
prior to running anonymous block again; just do as below
SET ROLE NONE;
doing so should result in same error being thrown when invoking
BEGIN
   p_etl_test_view;
END;

Create a View from tables of different schemas

hi all,
can u pls give solution to create a View from tables of different schemas.
i have to bring data from one DB Server A,
which contains different schemas and tables in the schemas...
i need to insert that data in another DBServer B.
i made a procedure for this...
but when the connection fails from A, then i could not get data...
please suggest some solution..
thanks,
neelima

I don't know what database system you use, but in the most I know it is done that way:
SELECT
A.COL1,A.COL2.....
FROM
SCHEMA_NAME.TABLENAME A,
SCHEMA_NAME.TABLE_NAME B
WHERE
A.COL1 = B.COL2
...

HOW CAN I CREATE A VIEW FROM SAME TABLE WHERE I NEED COLUMNS DETAILS FROM DIFFERENT ROWS IN THE SAME TABLE

i have a table1 on the top, but i want to create a view from table 1 as view mentioned beneath the table 2. Could any of you please help me.
table1
ID
office
employee
activity
1
246
-9999
698
2
##-99
21480
698
3
104
-9999
7025
4
##-99
88908
7025
5
108
-9999
2415
6
##-99
17135
2415
7
246
-9999
698
8
##-99
21480
698
9
104
-9999
7025
10
##-99
88908
7025
11
108
-9999
2415
12
##-99
17135
2415
view
ID
office
ID1
employee
activity
1
246
2
21480
698
3
104
4
88908
7025
5
108
6
17135
2415
7
246
8
21480
698
9
104
10
88908
7025
11
108
12
17135
2415

declare @forumsTable table (ID int, officeID int, employeeID INT, activityID int)
insert into @forumsTable (ID, officeID, employeeID, activityID)
values
(1 ,246, -9999, 698 ),
(2 ,-99, 21480, 698 ),
(3 ,104, -9999, 7025),
(4 ,-99, 88908, 7025),
(5 ,108, -9999, 2415),
(6 ,-99, 17135, 2415),
(7 ,246, -9999, 698 ),
(8 ,-99, 21480, 698 ),
(9 ,104, -9999, 7025),
(10 ,-99, 88908, 7025),
(11 ,108, -9999, 2415),
(12 ,-99, 17135, 2415)
select f1.ID, f1.officeID, f2.ID as ID1, f1.employeeID, f1.activityID
from @forumsTable f1
inner join @forumsTable f2
on f1.activityID = f2.activityID
and f1.officeID > 0
and f2.employeeID > 0
and f1.id - f2.id = -1
You really need to improve the relationship here.
Perhaps you could make office and activity an exclusive pair.

Firefox does not display my customised Adobe Air browser based skin when viewed from a server

Hi,
I have edited the skin for my Adobe Air Browser based help. It appears fine in Explorer and Chrome, but Firefox displays the default black Air skin when viewed from a server.
However, it appears OK when viewed locally on my machine in Firefox?
Does anyone know why this is or if there is a way to make my customised skin display when viewed from a server using the Firefox browser?
Cheers

Peter,
I think this was it:
http://forums.adobe.com/message/2846292#2846292
although my problem is just with Firefox - my amended skin displays fine in Internet Explorer.
Firefox just applies the default Midnight Black skin.
Cheers

Using SQL view From SQL Express in Flex

Hello All , i am new at Flex and yet searching for a basic answere to even more basic question...
i am currently looking for a way o extract and import SQL views from my SQL Express database ( on my local host) and present it with RIA on desktop, grpahs Charts etc.
my question is, which way is the best to do so ?
need i to use Coldfusion For the Data ? and then Flex3 For the design ( i.e Graphs)?
or maybe using another ODBC program for XML file and then Connect it as Data Resource into the flex3 project
as you must see , i am a bit confused....
thanks in advance

Hi,
If you go for AIR you can directly connect to Database and you can get the data and can be shown graphically ,
But if you Go for Webapplication(Flex ) then definately u should use some backend like CFC,PHP,JAVA,.Net............ in order to connect to DB and use Remote Objects/HttpService and show the Result Graphically..............

Create a view from 10 tables

Hi Experts,
I want to create a view from 10 pricing tables rather than write 10 different select query in my application. Most of the columns of the pricing tables are same. I want all the data from these tables into the respective columns. Further I want an indicator as to which table does this record belong to. How can I achieve this?
Ex:
Table 1 columns: kappl kschl vkorg vtweg vkgrp
Table 2 columns: kappl kschl vkorg vtweg matkl matnr
if each table has two records, I want 4 records in my view in the respective columns along with the indicator that this record belongs to a specific column.
Regards

Hi,
Placing 10 tables in one view will drastically affect performance. This is highly unrecommended.
Anyhow if you insist on doing so you can create [database view|http://help.sap.com/saphelp_nw04/helpdata/en/36/74c0358373003ee10000009b38f839/frameset.htm] or use explicitly joins in your program.
Keep in mind that althought it is possible to use projection (only selection of choosen column) it is not logically appropriate to locate which table this column belongs to (as far as we are talking about key fields) as both have the same field as key field.
On the other hand when using projection for non-key columns it is you who define what is to be selected and how, therefore you know which column belongs to which table.
i.e
data: begin of st,
          lgart type t512w-lgart,
          molga type t512w-molga,
          lgtxt   type t512t-lgtxt,
        end of st.
select w~molga w~lgart t~lgtxt   "<- here using aliases you know which column is taken from which table
into st
from T512W as W
inner join T512T as T on
     W~LGART = T~LGART.
write: / st-lgart, st-molga, st-lgtxt.
endselect.
In this example lgart (key field) can be taken from either t512w or t512t, but fields mogla and lgtxt are taken from t512w and t512t respectively.
All in all this is correct as far as up to 3-4 tables are concerned. But 10 will be a disaster...
Hope this helps you
Marcin

Error while creating the view from one instance to another instance

Hi Experts
I want to Create a view which reside in one instance for example xxx Instance . I want to create the same view which reside in xxx instance to another instance for example YYY Instance How to acheive this ?
I tried desc the View take the view script from XXX instance and copied the view script to YYY instance when I compiled Iam getting an Error
For Example My view in XXX Instance
CREATE OR REPLACE FORCE VIEW xxx.sample
First_name,
last_name
as
     select "F_NAME",
             "L_NAME"
     FROM EMP;When try to copy and compile the same view in my YYY Instance
i am getting error
ORA: table or view does not exist
Advance Thanks
AT

A.T wrote:
Hi Experts ,
Thanks For all your valuable information I amTrying Of DB Link i think so
As per My understanding If wrong anywhere please advice me
Here Instance is Like : One DB 10g divided into several Instance like (test , devlopement , production Instance)
Now hope i ll make my req clear .
Coming to my reqirement
the actual table EMP is in xxi.TEST (Here xxi => Schema and test is an Instance )
I want to create the view which is based on by table EMP which in my test instance to devoplment instance
For example xxo.development (here xxo => Schema and development is an Instance )
Need to access the xxi schema in Test Instance How can I create a DB Link please share your ideas and advice me
Advance Thanks
ATIt's still not at all clear, but let me outline what I think you are after
Given a database, ORCL_A
In database ORCL_A we have a schema, HALFTRACK
User HALFTRACK has a table, MYSTUFF
Given a database, ORCL_B
In database ORCL_B we have a user GREENBRASS
User GREENBRASS needs to be able to query the table HALFTRACK.MYSTUFF.
In database ORCL_B, as user GREENBRASS
create database link mylink
connect to halftrack identified by halftracks_pswd
using ORCL_A;
select * from mytable@mylink;The db link defines a connection specification to ORCL_A, using the credentials of a user on ORCL_A. The target of the USING clause in the link definition must be an entry in the tnsames.ora file on the server hosting database ORCL_B.
When querying through the link, database ORCL_B is simply acting as a client to ORCL_A, no different that a sqlplus session on ORACL_B's server. As far as ORCL_A is concerned, ORCL_B is just another client requesting a connection, connecting with the credentials defined in the link definition.

Create materialized view from Designer9i

Is there a way to create a materialized view from Oracle Designer 9i that will that have a header that look like this :
CREATE MATERIALIZED VIEW XXXXXXXXX
REFRESH COMPLETE ON DEMAND WITH PRIMARY KEY
Instead of this :
CREATE MATERIALIZED VIEW XXXXXXXXX
REFRESHWITH ROWID
Thanks
Jérôme

yes.
as long as you have the privilege.
but be careful, it may causing locking issue in the SQL Server side.

SQL to Oracle Linked Server

I am trying to create a linked server from SQL2000 to Oracle9i.
i have done followings:
Install Oracle9i client on sql server machine.
Create a tnsname entry for my oracle database.
Created a linked server using following query:
exec sp_addlinkedserver 'ORA_HIPPOCRT',
'Oracle', 'MSDAORA', 'HIPPOCRT'
exec sp_addlinkedsrvlogin 'ORA_HIPPOCRT',
false, NULL, 'HR', 'password'
But when I query the data as follows:
SELECT * FROM ORA_HIPPOCRT..HR.EMPLOYEES
I get following errors:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDAORA' reported an error.
[OLE/DB provider returned message: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.]
OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005: ].
What I am doing wrong?

I can get this to work using OPENQUERY() i.e.
select * from OPENQUERY(andyh, 'select * from TRAINDB.LINKEDSERVERDATATYPETEST')
To me though this has bodge written all over it.
Anyone out there with advise for me?
thanks.

Problems in creating Materialized View from 10g R2 to 11g

Hi,
We have two databases in 10g Release 2. These databases are on two different servers and we use
Materialized views to replicate data between these servers. We are currently using 64 bit version of
oracle 10g release 2 for LINUX.
Oracle Database 10g Release 10.2.0.1.0 - 64 bit Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
We use CENTOS 5 - 64 bit edition
We upgraded one of the databases to 11g (We exported the data from old database and
imported it in new database) . Then we tried to create a Materialized view with incremental refresh
on it where the base table is in the second Oracle 10g database.
The problem is that it is not letting us create the view with FAST Refresh. It kept on giving ORA-12028
error. We tried different remedies suggested on forums like creating a view with ROWID, but still it
continued giving us the same error. We also synchronized the characterset of Oracle 10g and Oracle 11g
installations but still it did not work.
Our base table size is pretty large (over 10 Million records) and if we do a full refresh, it takes hours to
refresh it.
Without incremental refresh, we will not be able to fucntion, and to upgrade both database simultaneously
we will need a large down-time which also we can not afford.
Please advise what should we do.
Best Regards
Madhup
Edited by: Madhup on Mar 2, 2009 10:45 AM

Hello,
Yesterday I met the same problem and very sad about this, however, my story is much more complicated (I think so).
I have 6 databases:
2 - 11g
2 - 10g
2 - 9i
Every database of each release has different characterset(UTF8 and AL16UTF16).
I am trying to create Materialized view with FAST REFRESH on Oracle 11g, when master tables are located on 10g database and 9i database.
Materialized view, which points to 9i database, was successfully created.
Materialized view, which points to 10g database, gets ORA-12028
Like you, I tried many notes from METALINK and thought at the begining that the problem is my characterset. But, when the materialized views were successfully built on Oracle 9i database, I understood that the problem is something else.
Did you find the actual reason why this issue does not work??
Thanks,
Alex

SSIS 2008 – Read roughly 50 CSV files from a folder, create SQL table from them dynamically, and dump data.

Hello everyone,
I’ve been assigned one requirement wherein I would like to read around 50 CSV files from a specified folder.
In step 1 I would like to create schema for this files, meaning take the CSV file one by one and create SQL table for it, if it does not exist at destination.
In step 2 I would like to append the data of these 50 CSV files into respective table.
In step 3 I would like to purge data older than a given date.
Please note, the data in these CSV files would be very bulky, I would like to know the best way to insert bulky data into SQL table.
Also, in some of the CSV files, there will be 4 rows at the top of the file which have the header details/header rows.
According to my knowledge I would be asked to implement this on SSIS 2008 but I’m not 100% sure for it.
So, please feel free to provide multiple approaches if we can achieve these requirements elegantly in newer versions like SSIS 2012.
Any help would be much appreciated.
Thanks,
Ankit
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

Hello Harry and Aamir,
Thank you for the responses.
@Aamir, thank you for sharing the link, yes I'm going to use Script task to read header columns of CSV files, preparing one SSIS variable which will be having SQL script to create the required table with if exists condition inside script task itself.
I will be having "Execute SQL task" following the script task. And this will create the actual table for a CSV.
Both these components will be inside a for each loop container and execute all 50 CSV files one by one.
Some points to be clarified,
1. In the bunch of these 50 CSV files there will be some exception for which we first need to purge the tables and then insert the data. Meaning for 2 files out of 50, we need to first clean the tables and then perform data insert, while for the rest 48
files, they should be appended on daily basis.
Can you please advise what is the best way to achieve this requirement? Where should we configure such exceptional cases for the package?
2. For some of the CSV files we would be having more than one file with the same name. Like out of 50 the 2nd file is divided into 10 different CSV files. so in total we're having 60 files wherein the 10 out of 60 have repeated file names. How can we manage
this criteria within the same loop, do we need to do one more for each looping inside the parent one, what is the best way to achieve this requirement?
3. There will be another package, which will be used to purge data for the SQL tables. Meaning unlike the above package, this package will not run on daily basis. At some point we would like these 50 tables to be purged with older than criteria, say remove
data older than 1st Jan 2015. what is the best way to achieve this requirement?
Please know, I'm very new in SSIS world and would like to develop these packages for client using best package development practices.
Any help would be greatly appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com
1. In the bunch of these 50 CSV files there will be some exception for which we first need to purge the tables and then insert the data. Meaning for 2 files out of 50, we need to first clean the tables and then perform
data insert, while for the rest 48 files, they should be appended on daily basis.
Can you please advise what is the best way to achieve this requirement? Where should we configure such exceptional cases for the package?
How can you identify these files? Is it based on file name or are there some info in the file which indicates
that it required a purge? If yes you can pick this information during file name or file data parsing step and set a boolean variable. Then in control flow have a conditional precedence constraint which will check the boolean variable and if set it will execute
a execte sql task to do the purge (you can use TRUNCATE TABLE or DELETE FROM TableName statements)
2. For some of the CSV files we would be having more than one file with the same name. Like out of 50 the 2nd file is divided into 10 different CSV files. so in total we're having 60 files wherein the 10 out of 60 have
repeated file names. How can we manage this criteria within the same loop, do we need to do one more for each looping inside the parent one, what is the best way to achieve this requirement?
The best way to achieve this is to append a sequential value to filename (may be timestamp) and then process
them in sequence. This can be done prior to main loop so that you can use same loop to process these duplicate filenames also. The best thing would be to use file creation date attribute value so that it gets processed in the right sequence. You can use a
script task to get this for each file as below
http://microsoft-ssis.blogspot.com/2011/03/get-file-properties-with-ssis.html
3. There will be another package, which will be used to purge data for the SQL tables. Meaning unlike the above package, this package will not run on daily basis. At some point we would like these 50 tables to be purged
with older than criteria, say remove data older than 1st Jan 2015. what is the best way to achieve this requirement?
You can use a SQL script for this. Just call a sql procedure
with a single parameter called @Date and then write logic like below
CREATE PROC PurgeTableData
@CutOffDate datetime
AS
DELETE FROM Table1 WHERE DateField < @CutOffDate;
DELETE FROM Table2 WHERE DateField < @CutOffDate;
DELETE FROM Table3 WHERE DateField < @CutOffDate;
GO
@CutOffDate which denote date from which older data have to be purged
You can then schedule this SP in a sql agent job to get executed based on your required frequency
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Running a SSIS package with SQL Job and Linked Server

I have a SSIS 2008 package. In one of the Script task I am calling a stored procedure which is using Openquery using linked server. I deployed this package with protection level as "EncryptWithPassword" and gave a password to the package.
Created a SQL job and edited its command line to include the password. If I login to SQL Server Mgmt Studio with Windows Authentication and run the job manually it runs fine. But when I schedule it then I get an error that "The Communication link to Linked
server failed".
Please help

Hi Vivek.B,
The issue should occur because the SQL Server Agent Service Account or SQL Agent Proxy account under which the job step runs doesn’t have sufficient permissions on the linked server.
If the job owner is the sysadmin fixed server role, the job can be run under the SQL Server Agent Service Account or a proxy account, then please make sure the SQL Agent Service Account or the proxy account has corresponding login on the linked server. If
the job owner is not a sysadmin fixed server role, the job must run under a proxy account. In this case, make sure the proxy account has a corresponding login on the linked server.
Reference:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/10/13/who-owns-my-job-and-who-runs-it.aspx
Regards,
Mike Yin
TechNet Community Support

MS SQL 2005 x64 Linked Server to Oracle 10g 32bit

I need to connect to a 10.2.0.4 Oracle DB from a SQL Server 2005 x64 on W2003.
The Instant Client installed is 10.2.0.1 with ODP 10.2.0.3, which is used to connect to another Oracle DB.
I get de error ORA-12154 while doing the linked server query.
Do I really need to update de Instant Client?
Thankx and some more info.
I can reach it with TOAD from my laptop which has Instant Client 11.1.0.7.
I followed several how-tos while configuring the linked server.
The other linked server supposely works but I'm not sure and don't know the Oracle version.

Hi sanjay,
but why sysdate is giving me the today's date and when i use getdate ...it does not give me anything..
i am using openquery tooracle data base..usually i have to use Oracle command..
Mo..

How to Create SQL "Databases" from LV?

Is there a way to create SQL Databases (not just tables) from inside LabVIEW??? This sould be fairly easy...

All I know is what is in the SQL Server help file. There is the SQL command "CREATE DATABASE". An example is:
USE master
GO
CREATE DATABASE Sales
ON
( NAME = Sales_dat,
FILENAME = 'c:\program files\microsoft sql server\mssql\data\saledat.mdf',
SIZE = 10,
MAXSIZE = 50,
FILEGROWTH = 5 )
LOG ON
( NAME = 'Sales_log',
FILENAME = 'c:\program files\microsoft sql server\mssql\data\salelog.ldf',
SIZE = 5MB,
MAXSIZE = 25MB,
FILEGROWTH = 5MB )
GO
You have to have the correct permissions in order to do this and the server itself has to exist. I'm assuming that you already have the Database Connectivity Toolkit, LabSQL (http://www.jeffreytravis.com/lost/labsql.html), or are using your own ADO routines.

Create sql view from linked server ?

Similar Messages

Maybe you are looking for