Create the file from data base

iam trying to upload material master data using direct input method in lsmw. i want one input text file which contains the information about material master data.
can any one pls help me how to create this material master txt file from the data base.
thanks,
pandu.

I have used so many times below data for testing purpose :
Keep the file data as comma delimter and use only basic data view.
material industrial sector material type   material desc Unit of meas   Matl group
A004      M                      COUP             test A004        KG                01
a005      M                      COUP             test a005         KG                01
remove the header and basic data view - keep constant while mapping.
Thanks
Seshu

Similar Messages

Issue in moving files from data fodler to processed folder in background

Hi All,
I am facing one issue in moving files from data fodler to processed folder in case of background execution.
When i am executing the file in the foreground, i can move the file from Data folder to processed folder. I am using SXPG_COMMAND_EXECUTE FM to move the file from data folder to processed folder. I can see the file in processed folder once the program is executed.
But in case of executing the same program in background, it is giving me the error "Failed to move the file to processed folder" in the spool of SM37 and i can see the file still laying in data folder.
I tried to check other programs which acesses the same folder as the above program, whether they are able to move. They are able to move the file to processed fodler successfully both in foreground and background mode.
Please help me in resolving this issue.
Thanks,
Deepa

Hi Sanu,
Please use teh following code to move the file from source to target folder.
This is a code showing how to create and use COPY command of UNIX in ABAP
PARAMETERS:
Input file path
p_input TYPE localfile,
Processed file path
p_proc TYPE localfile.
Declare the Types to file data
TYPES: BEGIN OF L_X_OUTPUT,
sys(200), " Please note, there are asterisk before and after sys (i.e.sys)
END OF L_X_OUTPUT.
* Internal table to store file data
DATA l_i_output TYPE STANDARD TABLE OF l_x_output WITH HEADER LINE.
* Variable for the UNIX command
DATA: l_v_unix_comm(255) TYPE c.
Copy command of UNIX
CONCATENATE 'mv' p_input p_proc
INTO l_v_unix_comm SEPARATED BY space.
For example the Copy command is stored as below
cp u2018/data/interfaces/input/input_fileu2019 u2018/data/interfaces/processed/processed_fileu2019
Examples of UNIX Command *u2022 mv filename1 filename2 --- moves a file (i.e. gives it a different name, or moves it into a *different directory (see below) *u2022 cp filename1 filename2 --- copies a file
Execute the UNIX Copy command.
This command will copy the file from input file path to the processed file path
CALL 'SYSTEM' ID 'COMMAND' FIELD l_v_unix_comm
ID 'TAB'
FIELD l_i_output-sys.
IF sy-subrc eq 0.
write: 'File is copied successfully using UNIX command in ABAP'.
ENDIF.

I have recently transferred data from my old PC to my new Mac Book Pro (Mavericks OS). Each transfer creates a new User account (titled 'Owner', 'Owner 1', etc). I want to merge the files from these transfers into my main user account. Help?

I have recently transferred data from my old PC to my new Mac Book Pro (Mavericks OS). Each transfer creates a new User account (titled 'Owner', 'Owner 1', etc). I want to merge / consolidate the files from these newly created User accounts into my main user account. Is there a tutorial for this process, or any tips? Anyone?

Four transfers. After the initial attempt with Migration Assistant failed (after hours and hours of wifi transfer) I did "mini-transfers" of more manageable, smaller bits of files -- my music in one, photos in another, etc. Since posting my question in this forum, i contacted Apple support, chatted with Angela, and she suggested getting an ethernet-USB adapter for my mac, connecting my external drive with ethernet and transferring files manually -- that is, NOT using the Migration Assistant at all. She sent me this link to help: Switch Basics: Migrate your Windows files to your Mac. I appreciate your response, tho', Csound1!

HT4889 I have accidentally created another account when using Migration Assistant to a new MBA. How do I now 'migrate' all the files from both accounts into one to save myself having two accounts, both of which are me? Help?

I have accidentally created another account when using Migration Assistant to a new MBA. I have read that I probably should not have skipped migration in the initial set up and the problem would have been avoided but, alas, here I am. Does anyone know how I can 'migrate' all the files from one of the accounts that has been created to the other, so then I can delete it and have a single user on the computer seeing as I am the only person using it? I have read starting again, if this is the way to go, where is the best place to start 'starting again'?

Yes definitely should see it but its not coming up (I don't think) when I log out of 2nd user and into the main account. Opening finder in the 2nd account, I can obviously find the public folder because thats where I dropped all the files, but when in the main account, it can't be found. The only public folder that comes up is the folder for that account (main account) and it does not display files I'm looking for. Frustrating....
EDIT: Have found it through a round-about way but all music and photo and movie etc files have a red stop sign disallowing them from being transferred. Can you guess what the next question will be?

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

Get the File information(data) from Directory AL11.

Hi Friends,
I want to get the file data from the given particular directory(which maintained in AL11) in the selection screen.
for listing the files from the directory, i used FM 'RZL_READ_DIR_LOCAL'. it displaying only files what ever in the given directory.
But my requirement is to display the complete data in the file ( log file contents).
please suggest me with relevant Function module or logic.
Thank you.
Regards
Ramesh M

HI,
Try using function module:
PARAMETERS:     p_fname    LIKE rlgrap-filename               .
data l_path       TYPE dxlpath       .
DATA: l_true       TYPE btch0000-char1.
*-- F4 functionality for filename on Application Server
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = '/usr/sap/input'
      filemask         = ''
    IMPORTING
      serverfile       = l_path
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    p_fname = l_path. ""Here p_fname is the parameter for the user to select the file from the application server
ENDIF.
PFL_CHECK_OS_FILE_EXISTENCE
DATA: l_file       TYPE tpfht-pffile.
CLEAR l_file.
l_file = p_fname.    "Here p_fname is the parameter for the user to select the file from the application server
CALL FUNCTION 'PFL_CHECK_OS_FILE_EXISTENCE'
    EXPORTING
      fully_qualified_filename = l_file
    IMPORTING
      file_exists              = l_true.
IF l_true = space.
    MESSAGE e001(zmsg).
ENDIF.
Hope it helps
Regards
Mansi

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

Pull the data from Azure sql and load into the on premises data base

Hi friends,
I have small requirement here, I have to pull the data from Azure sql and load it to the on premises data base.
I am using Azure sync process to do that, but it will take so much time to do that..
I know that azure have some limitations, is there any other way to do this..
Please help me on this...

Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu

I can't print PDF files from the latest Firefox; asks which program created the files. None of the options listed will print the files, such as IRS forms. Running Mac OS 10.6.8.

I run Mac OS 10.6.8.
When I try to print a PDT file, such as an IRS form, Firefox opens a small dialog box asking what program was used to create the file I wish to print.No matter which of the selections I choose, the file will not print.
I have the latest Adobe Reader installed.
Note that these files always open normally in Safari.
Help!

Hi there,
Does you printer/RIP support protocols other than AppleTalk? If it does, then I would change it to something like HP Jetdirect-Socket.
PaHu

FAQ: Creating PDF Files from FrameMaker v.6 & earlier Documents -- Why you should not use "save as PDF"! -- Windows & MacOS Only!

An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
GOOD NEWS
I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
DON'T USE "SAVE AS PDF"
But what's wrong with "save as PDF" as currently implemented?
The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
(1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
(2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
(3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
(4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
(5) Some or all text in the resultant PDF file cannot be searched or indexed.
(6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
(7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
(8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
(9) Some or all page content is missing (other than margin areas).
(10) Relatively inefficient PDF is generated.
If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
Whether the printer supports color (Acrobat Distiller does)
What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
Resident fonts (Acrobat Distiller doesn't really have resident fonts)
Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
DON'T USE PDFWRITER
The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
Case 3: Acrobat 3
Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
- Dov

You're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...

Problem while dowloading the file from Application Server

Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srini

but our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas

Error in creating the Domain from template in WLS 10.3.2

Hi All,
I am using WLS 10.3.2 and I need to create a domain from the template of my existing domain.
I followed these steps while creating my existing domain:
I chose these 2 while creating my existing domain
** WebLogic Portal - 10.3.2.0*
** Weblogic Portal Collaboration Repository - 10.3.2.0 [wlportal_10.3]*
after Test JDBC Data Sources step where all my tests fail and in the next step
Run Database Scripts: here I am running the Scripts by clicking on Run Scripts button and I get the message Database Load Successful!
everything goes fine and my domain works fine.
Now I am trying to create the domain template based on this domain which I created.
After this step I am trying to create a new domain from the newly created template. I follow the steps given and at the end
Creating Domain: Here it shows the progress and once it reaches 100% it displays the info in a popup window saying CFGFWK-60600: Before booting this domain, it is necessary to run the SQL file located at C:\bea\user_projects\domains\base_domain\security\SQLAuthenticator.sql in order to initialize a domain security admin user in the database.
I assume this message is because while creating the domain from template I did not get the step Run Database Scripts and that is why I get that msg at the end.
So I executed the create_db.cmd file wich is in domain home now I get the msg
+[java] Files=+
+[java] file:/C:/bea/user_projects/domains/local_domain_frm_tmpl/security/SQLAuthenticator.sql+
+[java] Load was succesful+
+[echo] ***** output written to logfile=create_db.log+
so that says DB load was successful now when I tried to start the domain wich is created from the template.....it doesn't start and throws this error:
+<Jun 18, 2010 5:24:07 PM PDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing C:\bea\user_projects\domains\local_domain_frm_tmpl\config\config.xml - Inval+
id xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://xmlns.oracle.com/weblogic/domain>
+<Jun 18, 2010 5:24:07 PM PDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing C:\bea\user_projects\domains\local_domain_frm_tmpl\config\config.xml - C:\be+
a\user_projects\domains\local_domain_frm_tmpl\<unknown>:11:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/ws
rp>
+<Jun 18, 2010 5:24:07 PM PDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: [Management:141245]Schema Validation Error in C:\bea\user_projects\domains\local_doma+
in_frm_tmpl\config\config.xml see log for details. Schema validation can be disabled by starting the server with the command line option: -Dweblogic.configuration.schemaValidationE
nabled=false>
+<Jun 18, 2010 5:24:07 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>+
+<Jun 18, 2010 5:24:07 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>+
+<Jun 18, 2010 5:24:07 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>+
Stopping PointBase server...
PointBase server stopped.
seems that this error now has something to do with config.xml........
Any suggestions.......???
Thanks,
Win

Hi Win35,
Your Error Indicates that ...may be u are trying to Manually Edit the "config.xml" Security Realm Part.. There something is wrong...
<Jun 18, 2010 5:24:07 PM PDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing C:\bea\user_projects\domains\local_domain_frm_tmpl\config\config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://xmlns.oracle.com/weblogic/domain>
<Jun 18, 2010 5:24:07 PM PDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing C:\bea\user_projects\domains\local_domain_frm_tmpl\config\config.xml - C:\bea\user_projects\domains\local_domain_frm_tmpl\<unknown>:11:9: error: failed to load java type corresponding to t=<font color=maroon>wsrp-identity-asserterType@http://www.bea.com/ns/wlp90/security/wsrp</font>>
*This specially happens when working in Nopepad/TextPad ...in the Schema declaration (At the top 2-3 Lines) of "config.xml" file some Spaces or Special Characters OR a Line Break occurs gets included...*
Thanks
Jay SenSharma
http://weblogic-wonders.com/weblogic (WebLogic Wonders Are here)

Howto make created folders/ files from one teacher, read only for other teachers?

Hello there,
as an admin @ school I was wondering how to make created folders/ files from one teacher, read only for other teachers?
- In a 2008domain, created a group "teachers"
- created a folder "teacher data" where all teachers have read/write permissions
ideal,a teacher who make's a folder in "teacher data" should be the only oen who is able to add file's to that folder and dele that folder or files. Other teachers may be able to read the content of the folder.
Is this possible to set up and how?
many thanks.
Nico.
rds

Hi Nico,
You could set the permissions below to resolve the issue:
For the root folder "teacher data": give the full control permission to CREATOR OWNER – "Subfolders and files only" and give the read/write permissions to the group "teachers"– "This folder only".
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Production issue - Sender File adapter not picking up the files from folder

Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

Hi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana

I can't create PDF files from DWF files

I'm looking for a solution for creating PDF files from DWF files. When I attempt to create a DWF file to PDF, the file has problems being created. Does anyone have a solution to this?

We are trying to print to pdf format from a dwf (Autodesk Design Review) drawing file. DWF is autodesk’s version of PDF. In autocad, you can print to either dwf or pdf. However, some of the fonts within autocad are not recognized by adobe so the fonts often don’t print properly. Thus, we print to dwf first, then print again to pdf.
We operate 2 basically identical computers; the one computer is able to print from dwf to pdf and the other is not. When I say not able, only part of the drawing actually prints; like it is not able to process the data. The computer that cannot print from dwf to pdf, can actually print directly to pdf from Autocad. It just cannot print from dwf to pdf.
Both computers are running Windows 7, Autocad Architecture 2015, and Adobe acrobat X.
Let me know if this is enough information.

Create the file from data base

Similar Messages

Maybe you are looking for