Creating a client out of a BPM WSDL

Hi,
Why do we get errors while creating a simple client out of BPM auto-generated WSDl's which work fine in SOAP UI?
Whats the reason?
The Process as a Web Service WSDL gives me an error while creating a client or even after creating a client , I get an error while running it...

Create the path and convert it to an area type object.
See manual for details.

Similar Messages

Error at creating Client Proxy of external webservice (WSDL)

Hi Experts,
I try to create a Client Proxy Object out of an external webservice. Here is the WSDL URL:
[http://www.webservicex.net/CurrencyConvertor.asmx?wsdl]
I try to create it with this URL and then I get the error message
Not implemented
Exception of class CX_SIDL_INTERNAL_ERROR
I found two other threads with a similar problem:
cunsuming external webservice in ABAP
Problem while consuming external webservice
But there is no solution that worked for me. In the first thread it is mentioned, that the code between
<wsdl:binding name="XXXXHttpGet" type="tns:XXXHttpGet">
and it's closing brackets should be removed in a local file. I tried that and was able to create a client proxy object out of this local wsdl-file. But then I called the webservice with the folling coding for testing:
report z_currency_converter.
data: convert type ref to zzzco_currency_convertor_soap.
try.
    create object convert
exporting
    logical_port_name = 'Z_LP'
catch cx_ai_system_fault .
endtry.
   data: output type zzzconversion_rate_soap_out .
   data: input type zzzconversion_rate_soap_in .
   input-from_currency = 'EUR'.
   input-to_currency = 'USD'.
try.
call method convert->conversion_rate
exporting
    input = input
importing
    output = output
catch cx_ai_system_fault .
catch cx_ai_application_fault .
endtry.
write output-conversion_rate_result.
The same code worked fine in another system. In this "older" system could also create a client proxy, I think because it has a newer Support Pack version.
SAP says the following:
The problem is that this WSDL uses two bindings different from SOAP
binding which is not in conformance with Basic Profile 1.1 -
http://www.ws-i.org/Profiles/BasicProfile-1.1.html#WSDLBINDINGS .
I looked in the document, but I do not know where the problem in the WSDL file exactly is. What have I to change? Or can somebody give me the URL of a free webservice, that you used for creating a client proxy with a new support pack standing? In the "old" system there is not yet the SOAMANAGER but in the one where it doesn't work.
I hope you have an idea.
Thanks a lot in advance!
Best Regards,
Ingmar

I think it is the problem of version.U need to ask SAP to release some patch levels to correct it.
Regards
Snehasish

Create a Client Proxy for consume wsdl via https URL return a 110 HTTP code

Dear all.
I has new in this forum, and i have a problem when trie to create a client proxy from external WSDL, using https URL, system returns me a 110 http code. For others externs WSDL called via http don´t have any problem, and create client proxy perfect
Someone can help please.
best regards in advance.

Dear Anton I download de WSDL definition in a local file, but when I trie to use, the error persist.
If I test de URL via WebService navigation option, this work correctly, but if I put this URL thats begins with https, in se80--> create client proxy -->insert URL and then system returns the message HTTP error (return code 110, message "")
What it´s happen?.
Best regards in advance.
Juliá

How to create Proxy CLIENT USING .WSDL ?

I apologize if i have posted this question in the wrong forum.My question is concerned with WSDL.
Recently i came across a question in as :
Write a command to Create proxy client by using .WSDL and set of XSD file.
Can anyone provide me some pointers as to where i can find more information on this.
Thank you for your consideration.

sunjava84 wrote:
I apologize if i have posted this question in the wrong forum.My question is concerned with WSDL.
you did. Try http://www.rentacode.com next time.
Can anyone provide me some pointers as to where i can find more information on this.
The documentation of any web services client stack.

Exception when creating ABAP client proxy using WSDL

Hi Experts,
I tried to create a client proxy on the CRM system for a web service URL (where the WSDL exists), in the transaction SE80.
When I tried creating this, i got exception as follows.
Exception occured in communication framework:error in HTTP framework:404 conn failed http://inld50054696a:8080/clearspace/rpc/rest?forumservice?wsdl
Please let me know, how to tackle this problem.
What are all the settings that needs to be done in this regard.
Regards
Lakshman

Hi Vasanth,
There are many threads and blogs on this topic.
Choose the search Forum on the Forum page and select "All categories" in the Category field and enter your topic "ABAP client proxy from WSDL" in the search field.
Rgds,
Sam Raju

Exceptions while creating ABAP client Proxy

Hi Experts,
I tried to create a client proxy on the CRM system for a web service URL (where the WSDL exists), in the transaction SE80.
When I tried creating this, i got exception as follows.
Exception occured in communication framework:error in HTTP framework:404 conn failed http://inld50054696a:8080/clearspace/rpc/rest?forumservice?wsdl
Please let me know, how to tackle this problem.
What are all the settings that needs to be done in this regard.
Regards
Lakshman

Have you verified that your SAP system is set up to be able to send messages out over http? Our firewalls caused the same problem- by configuring proxy settings in transaction SICF we worked around the error.
Hope that helps!
Abby

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

OATS: Error Creating datasource client connection

Hi All
When i try to add montiors in the OATS controller machine i am getting the following error .
Error while creating datasource client connection.
i am trying to monitor a linux machine. I am able to ping that machine from controller.
when i tried to do
plink.exe username@hostname i am getting the following error ...
FATAL error : Network error : Connection timed out..
Can anyone please help me on this??
Thanks

I'm not sure if this is the same problem but the following thread may help (mentioning the ports that may need opening on your firewalls)...
Re: What are the various ports used by OLT?
oracle.port.rmi=4444
oracle.port.http=8088
oracle.port.empstart=9001
oracle.port.uil2=7071
oracle.port.dataCollector=7073
oracle.port.webservice=8083
oracle.port.jndi.rmi=1098
oracle.port.jndi=1099
oracle.port.https=8433
* 9001 (Agent Comunication Port)
* 1099 (Datacollector Comunication Port)
* 8088 (for running OpenScript scripts)

Using X509 certificates to create a client in a JCo destination / pool

Hi,
Our administrators have set up JCo destinations for us developers to use in connecting to the SAP R/3 back-end. We need to use X509 certificates instead of username/password to create a connection. How is this done? The JCo API doesn't seem to list any class/method combination that is suitable.
JCO.createClient allows me to pass an X509 certificate, but it doesn't allow me to specify what JCO.Pool (i.e., JCo destination) to use.
JCO.addClientPool seems to allow both, but I don't think I want to really "add" a pool-- don't I just want to "use" a pre-existing pool, i.e., one of the JCo destinations our administrator has set up?
Do I need to create a Client using the X509 certificate and somehow add this Client to the JCO.Pool? I thought JCo destinations were meant to be pre-established Client pools waiting for a Client to be plucked out of it and used. Is that wrong? What am I missing?
Thanks in advance for your responses.

Hi,
I'm note sure whether you can use prepared JCo destinations in this case. However, if it's possible to use single JCo clients you instantiate when you need them, you have different options depending on whether you have an Enterprise Portal installed on top of your J2EE Engine or not.
--> Without Portal
Retrieve the user's current certificate from UME using:
[code]com.sap.security.api.IUser currentUser = ...;
java.security.cert.X509Certificate[] certificates = currentUser.getUserAccounts()[0].getCertificates();
byte[] certBytes = certs[0].getEncoded();
String encodedCert = someBase64Method(certBytes);
Properties jcoProperties = new Properties();
// Add your backend properties like hostname and so on...
jcoProperties.setProperty("jco.client.user", "$X509CERT$");
jcoProperties.setProperty("jco.client.passwd", x509Cert);
JCO.Client jcoClient = JCO.createClient(jcoProperties);[/code]
--> With Portal installed
In general: Define your backend system in the Portal's system landscape instead of as JCo destination. Configure it's logonmethod for X.509 certificates. Either use UME's user mapping feature directly via com.sap.security.api.UMFactory.getUserMapping()... to add the certificate properties to the JCO properties, or use some intermediate API, some of which are available in the portal, some of which reside in the J2EE Engine (details if you request them).
Best regards
Heiko

Unable to create SASL client connection for authentication mechanism [PLAIN

I have problem to use dscc to admin my ds/dps servers, since I the dscc can't contact dscc agent. Though the agent is running on the default port number with network-bind-port of 0.0.0.0, there is nothing I can do to fix it.
I debug the problem, and found following errors in server.log under dscc (deployed on SUN AS 8.2):
Message: Unable to create SASL client connection for authentication mechanism [PLAIN]|#]
[#|2007-08-21T15:28:40.252-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.SASLClientHandler.initialize(SASLClientHandler.java:124)|#]
[#|2007-08-21T15:28:40.253-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.AdminClient.connectionOpen(AdminClient.java:131)|#]
[#|2007-08-21T15:28:40.254-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.connect(ClientSynchroMessageConnectionImpl.java:71)|#]
[#|2007-08-21T15:28:40.256-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.generic.GenericConnector.connect(GenericConnector.java:177)|#]
[#|2007-08-21T15:28:40.257-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.jmxmp.JMXMPConnector.connect(JMXMPConnector.java:119)|#]
[#|2007-08-21T15:28:40.258-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)|#]
[#|2007-08-21T15:28:40.260-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getJmxConnector(NquickClient.java:816)|#]
[#|2007-08-21T15:28:40.261-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnector(NquickClient.java:519)|#]
[#|2007-08-21T15:28:40.262-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnectorSystemAuthentication(NquickClient.java:314)|#]
[#|2007-08-21T15:28:40.263-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool.getSyncServerMBean(NquickPool.java:435)|#]
[#|2007-08-21T15:28:40.264-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool$1.run(NquickPool.java:320)|#]
[#|2007-08-21T15:28:40.271-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | java.lang.Thread.run(Thread.java:534)|#]
[#|2007-08-21T15:28:40.289-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageTitleAlertAndText | Node has no attributes.|#]
[#|2007-08-21T15:28:40.293-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageActions | Could not obtain pageactions element.|#]
[#|2007-08-21T15:28:40.295-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageViewsMenu | Could not obtain pageviews element.|#]
Please help if you could figure out what's going on. Thanks!

Bug ID: 6551672
Synopsis: SunAS claims "Unable to create SASL client conn for auth mechanism" and do not talk to Cacao
Work Around:
Work arround:
Change the JVM of used by App Server.
Edit the file:
     /usr/appserver/config/asenv.conf
and replace
     AS_JAVA="/usr/j2se"
by
     AS_JAVA="/usr/java"
Then restart your AS domain.

How to create Web Service Proxy with help of WSDL.

Hi ,
How to create Web Service Proxy with help of WSDL .
Please help me .
Thanks in advacne for reply .

check out this article. It has all the details
http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html

User based authorization to create Purchase Orders out of Purchase Req.?

Hello,
I have the following requiment for my client:
User based authorization to create Purchase Orders out of Purchase Req.?
I am told the same can be achieved using same standard menu path in IMG/Customizing.
Please advise with the menu path and detials, Usefull answers will be rewarded.
Thanks

Using OMET Function Authorization, you can restrict users to create Purchase orders without Purchase Reqn.
Using OMET trxn code Create one Function Authorixation Called pr and in General Parameters tab Select the Field Selection and in Possible reference Objects Tab Mark the With ref to Prs check box and save.
Next, you've got to associate via SU01
Click Parameters, insert a new parameter id EFB to the authorization code.
Type in Parameters value you want e.g. XX
You have to assign the control for ALL the SAP buyers via thier SAP users id.
Logoff and login again. Then try to create a Purchase Order without a reference.
From Next time whenever you try to create with out referring PR it will not allow you to Save PO.
Regards,
Ashok

Problems creating a client proxy for a WS

I've tried creating a client proxy from a wsdl but I've had no luck getting it to work.
First of all I created the client proxy in se80 with instructions from a teched lecture. The proxy seems to be generated as intended. When I create the default logical port for the proxy in lpconfig, it doesn't get any URL at all by default in the Call Parameters tab. Atleast in the teched demo the logical port got the default URL straight away.
Therefore I opened the wsdl file with notepad and put the address that was specified in the soap:address element as the location attribute. After saving and activating both the logical port and the client proxy I tried testing the proxy. All the methods give the same following error message:
Sap Fault Code 1:
Found 0 operation definitions using keys...
The WS works fine from the WS Navigator test page though. If I change the logical port URL I get an "Unsupported xstream found" error message. Thus I assume the URL that I took from the wsdl should be correct. Can I assume the wsdl is somehow broken? As I look closer at the wsdl, it seems to consist of several wsdl's that are imported to the main wsdl.

Hi Evan,
I don't think the wsdl is broken. I assume your webservice is deployed on WAS. Typically the SAP wsdl consist of 3 files, main wsdl file and 2 other files for binding and porttypes.
When all three files are appropriately available then only the proxy gets generated.
Since in your case the proxy is generated and you could activate it, means there is no problem in the wsdl.
Are there any further details in your error?
Does your service methods require any input and you are providing the input appropriately?
Regards,
Vandana.

Issue while trying to create a Client Proxy

Hello,
I am new to this field of using web services, so maybe i am missing something here. I need to consume a webservice in ABAP. So these are the steps that I performing
1. Goto Se80 and select Enterprise Services and select Client proxy ->Create
2. Select radiobutton for Local file (I have the WSDL file saved on my desktop) Entered the path of the local file.
3. Requested it to be saved as a local object witha prefix as ZFR_
4 Click on Complete on the wizard.
I get an error on this Exception occured in library handler.
Exception occured in communication framework. Error in file upload.
Am I missing something. Do I have to configure anything before I can create a Client proxy. I need to use as it creates a class and that needs to be invoked in the ABAP program.
Please suggest.
Thanks and Regards
Sachin

Follow the following steps.
Go To SE80
then select Package name in which u are suppose to work
then Right click on Enterprise service
then right click on Client Proxies and then create
You have local WSDL file so select local file selection
then select file from local file with browse
then select package name and give prefix name
then save and activate it. ( note down abap name ).
Regards,
Chintan Contractor

Problem Creating New Client in SAP NW2004s ABAP+JAVA LINUX

Hi,
I installed successfully NW2004s dual stack on linux vmware (SUSE10 enterprise server). This stack give me two client by default, 000 and 001. System gives me default user sap* and password: sapn4sadm
I want to implement the process for BW enabling, and I want to create New Client for it. I have been used SCC4 to create a new client by logging on with the Client 000, but the problem start, when I log-on with the new client.
Client: 002
User: sap*
Password: pass
I have tried system default password of sap* , but that also dosen't help.
It doesn't work, I also try RZ10 to change the value of login/no_automatic_user_sapstar = 0, but I don't find any profile , when I click on the profile field, i get the message "Profile not found". I am not figuring out where I am doing wrong.
How can I success to create a new Client in which i could log on with sap* user. Please Help me
All yours help would be highly rewarded.
Obaid.

In order to edit profiles In RZ10, you must first import them.
Menu: Utilities --> Import Profiles --> Of Active Servers
After this you can add your parameter.
One alternative is to edit the profile directly with vi, restart the system, do all client copy tasks, remove the parameter with vi, restart the system again and then import the active profiles.
the profiles are located in directory
/usr/sap/<SID>/SYS/profile
and the filename is something like this
<SID>_DVEBMGS<instancenr>_<hostname>

Creating a client out of a BPM WSDL

Similar Messages

Maybe you are looking for