Creating a CSV file from a pl/sql procedure

Hi Everyone,
I would like to know how to write a procedure in pl/sql where i need to check if they are any records in a table say "Table A".
If they are any records in the "Table A" then we need to write those records in the "Table A" to the CSV file.
If they are no records then we need to insert a record into the CSV file that "No records are found in "Table A".
Could anybody please help ?
Thanks in advance

see this
ops$tkyte@8i> create or replace procedure dump_table_to_csv( p_tname in varchar2,
2 p_dir in varchar2,
3 p_filename in varchar2 )
4 is
5 l_output utl_file.file_type;
6 l_theCursor integer default dbms_sql.open_cursor;
7 l_columnValue varchar2(4000);
8 l_status integer;
9 l_query varchar2(1000)
10 default 'select * from ' || p_tname;
11 l_colCnt number := 0;
12 l_separator varchar2(1);
13 l_descTbl dbms_sql.desc_tab;
14 begin
15 l_output := utl_file.fopen( p_dir, p_filename, 'w' );
16 execute immediate 'alter session set nls_date_format=''dd-mon-yyyy hh24:mi:ss''
17
18 dbms_sql.parse( l_theCursor, l_query, dbms_sql.native );
19 dbms_sql.describe_columns( l_theCursor, l_colCnt, l_descTbl );
20
21 for i in 1 .. l_colCnt loop
22 utl_file.put( l_output, l_separator || '"' || l_descTbl(i).col_name || '"'
23 dbms_sql.define_column( l_theCursor, i, l_columnValue, 4000 );
24 l_separator := ',';
25 end loop;
26 utl_file.new_line( l_output );
27
28 l_status := dbms_sql.execute(l_theCursor);
29
30 while ( dbms_sql.fetch_rows(l_theCursor) > 0 ) loop
31 l_separator := '';
32 for i in 1 .. l_colCnt loop
33 dbms_sql.column_value( l_theCursor, i, l_columnValue );
34 utl_file.put( l_output, l_separator || l_columnValue );
35 l_separator := ',';
36 end loop;
37 utl_file.new_line( l_output );
38 end loop;
39 dbms_sql.close_cursor(l_theCursor);
40 utl_file.fclose( l_output );
41
42 execute immediate 'alter session set nls_date_format=''dd-MON-yy'' ';
43 exception
44 when others then
45 execute immediate 'alter session set nls_date_format=''dd-MON-yy'' ';
46 raise;
47 end;
48 /
Procedure created.
ops$tkyte@8i> exec dump_table_to_csv( 'emp', '/tmp', 'tkyte.emp' );
PL/SQL procedure successfully completed.

Similar Messages

How to execute a script(.sql) file from a PL\SQL procedure

I would like to know how to execute a .sql file from a stored procedure and the result of it should update a table. My .sql file contains select statements.

Hi!
just go through the following piece of code -
SQL> ed
Wrote file afiedt.buf
1 declare
2    str varchar2(200);
3 begin
4    str := '@C:\RND\Oracle\Misc\b.sql';
5    execute immediate(str);
6* end;
SQL> /
declare
ERROR at line 1:
ORA-00900: invalid SQL statement
ORA-06512: at line 5ORA-00900: invalid SQL statement
Cause: The statement is not recognized as a valid SQL statement. This error can occur if the Procedural Option is not installed and a SQL statement is issued that requires this option (for example, a CREATE PROCEDURE statement). You can determine if the Procedural Option is installed by starting SQL*Plus. If the PL/SQL banner is not displayed, then the option is not installed.
Action: Correct the syntax or install the Procedural Option.
Regards.
Satyaki De.

Stored Proc to create .csv file from table

Hi all,
I have a table with 4 columns and 10 rows. Now I need a stored proc to create a .csv file from the table data. Here the scripts to create a table and insert the row's.
Create table emp(emp_id number(10), emp_name varchar2(20), department varchar2(20), salary number(10));
Insert into emp values ('1','AAAAA','SALES','10000');
Insert into emp values ('2','BBBBB','MARKETING','8000');
Insert into emp values ('3','CCCCC','SALES','12000');
Insert into emp values ('4','DDDDD','FINANCE','10000');
Insert into emp values ('5','EEEEE','SALES','11000');
Insert into emp values ('6','FFFFF','MANAGER','90000');
Insert into emp values ('7','GGGGG','SALES','12000');
Insert into emp values ('8','HHHHH','FINANCE','14000');
Insert into emp values ('9','IIIII','SALES','20000');
Insert into emp values ('10','JJJJJ','FINANCE','21000');
commit;
Now I need a stored proc to create a .csv file in my local location. Please let me know If you need any other details....

Some pointers:
http://www.oracle-base.com/articles/9i/GeneratingCSVFiles.php
http://tkyte.blogspot.com/2009/10/httpasktomoraclecomtkyteflat.html
also, doing a search on this forum or http://asktom.oracle.com will give you many clues.
.csv file in my local location.What is your 'local location'?
A client machine? The database server machine?
What database version are you using?
(the result of: select * from v$version; )

SSIS 2008 – Read roughly 50 CSV files from a folder, create SQL table from them dynamically, and dump data.

Hello everyone,
I’ve been assigned one requirement wherein I would like to read around 50 CSV files from a specified folder.
In step 1 I would like to create schema for this files, meaning take the CSV file one by one and create SQL table for it, if it does not exist at destination.
In step 2 I would like to append the data of these 50 CSV files into respective table.
In step 3 I would like to purge data older than a given date.
Please note, the data in these CSV files would be very bulky, I would like to know the best way to insert bulky data into SQL table.
Also, in some of the CSV files, there will be 4 rows at the top of the file which have the header details/header rows.
According to my knowledge I would be asked to implement this on SSIS 2008 but I’m not 100% sure for it.
So, please feel free to provide multiple approaches if we can achieve these requirements elegantly in newer versions like SSIS 2012.
Any help would be much appreciated.
Thanks,
Ankit
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

Hello Harry and Aamir,
Thank you for the responses.
@Aamir, thank you for sharing the link, yes I'm going to use Script task to read header columns of CSV files, preparing one SSIS variable which will be having SQL script to create the required table with if exists condition inside script task itself.
I will be having "Execute SQL task" following the script task. And this will create the actual table for a CSV.
Both these components will be inside a for each loop container and execute all 50 CSV files one by one.
Some points to be clarified,
1. In the bunch of these 50 CSV files there will be some exception for which we first need to purge the tables and then insert the data. Meaning for 2 files out of 50, we need to first clean the tables and then perform data insert, while for the rest 48
files, they should be appended on daily basis.
Can you please advise what is the best way to achieve this requirement? Where should we configure such exceptional cases for the package?
2. For some of the CSV files we would be having more than one file with the same name. Like out of 50 the 2nd file is divided into 10 different CSV files. so in total we're having 60 files wherein the 10 out of 60 have repeated file names. How can we manage
this criteria within the same loop, do we need to do one more for each looping inside the parent one, what is the best way to achieve this requirement?
3. There will be another package, which will be used to purge data for the SQL tables. Meaning unlike the above package, this package will not run on daily basis. At some point we would like these 50 tables to be purged with older than criteria, say remove
data older than 1st Jan 2015. what is the best way to achieve this requirement?
Please know, I'm very new in SSIS world and would like to develop these packages for client using best package development practices.
Any help would be greatly appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com
1. In the bunch of these 50 CSV files there will be some exception for which we first need to purge the tables and then insert the data. Meaning for 2 files out of 50, we need to first clean the tables and then perform
data insert, while for the rest 48 files, they should be appended on daily basis.
Can you please advise what is the best way to achieve this requirement? Where should we configure such exceptional cases for the package?
How can you identify these files? Is it based on file name or are there some info in the file which indicates
that it required a purge? If yes you can pick this information during file name or file data parsing step and set a boolean variable. Then in control flow have a conditional precedence constraint which will check the boolean variable and if set it will execute
a execte sql task to do the purge (you can use TRUNCATE TABLE or DELETE FROM TableName statements)
2. For some of the CSV files we would be having more than one file with the same name. Like out of 50 the 2nd file is divided into 10 different CSV files. so in total we're having 60 files wherein the 10 out of 60 have
repeated file names. How can we manage this criteria within the same loop, do we need to do one more for each looping inside the parent one, what is the best way to achieve this requirement?
The best way to achieve this is to append a sequential value to filename (may be timestamp) and then process
them in sequence. This can be done prior to main loop so that you can use same loop to process these duplicate filenames also. The best thing would be to use file creation date attribute value so that it gets processed in the right sequence. You can use a
script task to get this for each file as below
http://microsoft-ssis.blogspot.com/2011/03/get-file-properties-with-ssis.html
3. There will be another package, which will be used to purge data for the SQL tables. Meaning unlike the above package, this package will not run on daily basis. At some point we would like these 50 tables to be purged
with older than criteria, say remove data older than 1st Jan 2015. what is the best way to achieve this requirement?
You can use a SQL script for this. Just call a sql procedure
with a single parameter called @Date and then write logic like below
CREATE PROC PurgeTableData
@CutOffDate datetime
AS
DELETE FROM Table1 WHERE DateField < @CutOffDate;
DELETE FROM Table2 WHERE DateField < @CutOffDate;
DELETE FROM Table3 WHERE DateField < @CutOffDate;
GO
@CutOffDate which denote date from which older data have to be purged
You can then schedule this SP in a sql agent job to get executed based on your required frequency
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Column heading is not coming while generating a .csv file from .sql file

Hi all,
Now since I am able to generate a .csv file by executing my .sql file, the column heading is missing in that. Please advise. I have used the following parameters in my query:
set linesize 1000
set colsep ','
set echo off
set feedback off
set pagesize 0
set trimspool on
spool /path/file.csv
select ...... from .... where .....;
spool off
exit

set pagesize 0 <-- your problem
you must set it into a high value (max value 50000)
see:
SQL> select * from dual;
D
X
SQL> set pagesize 0
SQL> select * from dual;
X
SQL> set pagesize 50000
SQL> select * from dual;
D
X

How to create .csv file from ABAP report

Hi
We have a requirement to generate .csv file from abap report.
Currently user saves data from abap report to spreadsheet(.xls format) in desktop. Then opens excel file and save as .csv format. Need option to save directly in .csv format instead of .xls format.
Please let me know, if there is any standard function module available to create .csv file.
Regards
Uma

I tried with your code it's going to dump
REPORT ZTEMP101 message-id 00.
tables: lfa1.
types: begin of t_lfa1,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      end of t_lfa1.
data: i_lfa1 type standard table of t_lfa1,
      wa_lfa1 type t_lfa1.
types truxs_t_text_data(4096) type c occurs 0.
data: csv_converted_table type table of TRUXS_T_TEXT_DATA.
select-options: s_lifnr for lfa1-lifnr.
select lifnr name1 from lfa1 into table i_lfa1
       where lifnr in s_lifnr.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
   I_FIELD_SEPERATOR          = ';'
         I_LINE_HEADER              =
         I_FILENAME                 =
         I_APPL_KEEP                = ' '
TABLES
    I_TAB_SAP_DATA             = I_LFA1
CHANGING
   I_TAB_CONVERTED_DATA       = csv_converted_table
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE                  = ' '
CODEPAGE                      = ' '
   FILENAME                      =
   'C:\Documents and Settings\ps12\Desktop\Test folder\exl.cvs'
FILETYPE                      = 'DAT'
MODE                          = ' '
WK1_N_FORMAT                  = ' '
WK1_N_SIZE                    = ' '
WK1_T_FORMAT                  = ' '
WK1_T_SIZE                    = ' '
COL_SELECT                    = ' '
COL_SELECTMASK                = ' '
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
TABLES
    DATA_TAB                      = csv_converted_table
FIELDNAMES                    =
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_WRITE_ERROR              = 2
INVALID_FILESIZE              = 3
INVALID_TYPE                  = 4
NO_BATCH                      = 5
UNKNOWN_ERROR                 = 6
INVALID_TABLE_WIDTH           = 7
GUI_REFUSE_FILETRANSFER       = 8
CUSTOMER_ERROR                = 9
OTHERS                        = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
my version is 4.6c

Create an ASCII file from pl/sql procedure

hello
I need to create a file starting from a pl/sql procedure launched by command line
I'll have my .sql file containing my procedure; I'll launch it via command line and it will create the ASCII file
In the procedure I'd like to use some stored procedures or functions
is all of this possible?

itmick wrote:
I need to create a file starting from a pl/sql procedure launched by command line
I'll have my .sql file containing my procedure; I'll launch it via command line and it will create the ASCII file
In the procedure I'd like to use some stored procedures or functions
is all of this possible?You could have the procedure code as well as invocation in your .sql file. In that case, launching the .sql file will
(a) compile your procedure and
(b) invoke it as well
Yes, the compiled procedure can invoke other stored procedures or functions.
To create the ASCII file, you could:
(a) use UTL_FILE supplied package in your procedure; this will create the ASCII file on the Oracle server, or
(b) have DBMS_OUTPUT.PUT_LINE calls in your procedure. When invoked from SQL*Plus, this will print out the lines on the SQL*Plus interface and you could spool it to a file on your client filesystem.
HTH,
isotope

Reading a CSV file from server

Hi All,
I am reading a CSV file from server and my internal table has only one field with lenght 200. In the input CSV file there are more than one column and while splitting the file my internal table should have same number of rows as columns of the input record.
But when i do that the last field in the internal table is appened with #.
Can somebody tell me the solution for this.
U can see the my code below.
data: begin of itab_infile occurs 0,
         input(3000),
      end of itab_infile.
data: begin of itab_rec occurs 0,
         record(200),
      end of itab_rec.
data: c_comma(1) value ',',
        open dataset f_name1 for input in text mode encoding default.
        if sy-subrc <> 0.
          write: /, 'FILE NOT FOUND'.
          exit.
        endif.
do
read dataset p_ipath into waf_infile.
split itab_infile-input at c_sep into table itab_rec.
enddo.
Thanks in advance.
Sunil

Sunil,
You go not mention the platform on which the CSV file was created and the platform on which it is read.
A common problem with CSV files created on MS/Windows platforms and read on unix is the end-of-record (EOR) characters.
MS/Windows usings <CR><LF> as the EOR
Unix using either <CR> or <LF>
If on unix open the file using vi in a telnet session to confirm the EOR type.
The fix options.
1) Before opening the opening the file in your ABAP program run the unix command dos2unix.
2) Transfer the file from the MS/Windows platform to unix using FTP using ascii not bin. This does the dos2unix conversion on the fly.
3) Install SAMBA and share the load directory to the windows platforms. SAMBA also handles the dos2unix and unix2dos conversions on the fly.
Hope this helps
David Cooper

Creating an xml file from recordset

Hi...
XML newbie here - so.
Is it possible to create and xml file from a recordset?
I need to create a datafeed of our e-commerce products.
Also, some of the db data contains HTML Code (product
description field),
how will this effect the xml file?
Another problem is that my xml file needs to contain url's
for the products
and product images. My ASP pages contain these URL in hard
code and then
pull the actual file names from the db
Hope that makes some sense
Thanks for any help
Andy

Hi David
Thanks for your help.
I think it will have to be option 1 as i am using Access DB.
I don't know how to go about it but will serach good old
Google.
Here is my recordset below, that pulls the required data from
Access.
The product and product image URL's need to be in the xml
file but only the
product image name and product id are in the database, e.g
image name
(imagename.jpg) productid (21)
The actual URL's are hardcoded in my ASP pages, e.g <img
src="products/medium/<%=(RSDetails.Fields.Item("Image").Value)%>"
Not sure if this makes things any clearer :-|
Thanks Again
Andy
<%
Dim RSdatafeed
Dim RSdatafeed_numRows
Set RSdatafeed = Server.CreateObject("ADODB.Recordset")
RSdatafeed.ActiveConnection = MM_shoppingcart_STRING
RSdatafeed.Source = "SELECT Products.Product,
Products.Description,
Products.Image, Products.image2, Products.ListPrice,
Products.Price,
Products.xml_feed, Manufacturers.Manufacturer,
Shipping.ShippingCost FROM
Shipping, Products INNER JOIN Manufacturers ON
Products.ManufacturerID =
Manufacturers.ManufacturerID WHERE
(((Products.xml_feed)=No));"
RSdatafeed.CursorType = 0
RSdatafeed.CursorLocation = 2
RSdatafeed.LockType = 1
RSdatafeed.Open()
RSdatafeed_numRows = 0
%>
"DEPearson" <[email protected]> wrote in
message
news:[email protected]...
> Andy,
>
> There are two ways you can create a xml file from a
recordset
>
> 1. Is to code it using Server.CreateObject(XMLDOM)
> 2. If you are using SQL server 2005, just request the RS
returns as XML
> data. using FOR XML AUTO after the where cause ( the
best way with 2005
> and
> higher sql server)
>
> The db data containing HTML code should not effect your
xml file, unless
> it
> is bad markup. You could wrap the data with
<![CDATA[the data or html
> markup, or javascript]]>
>
> If the url is a recordset field, then it will return
with the xml data.
> If
> not you can create a storage procedure that will build
your URL from the
> data
> in the database.
>
> It is best to use storage procedure (SP )for security
reason when pulling
> data
> from a MS Sql server, make all calls to the database in
a SP. Also be sure
> to
> validate the values in the querystrings before accepting
them, check for
> hack
> code.
>
> David
>

How to create an Excel file from XML in the Receiver File Adapter Comm Ch

How do I create an Excel file from XML in the Receiver File Adapter Communication Channel? I have my mapping done and I am outputting the file as a comma delimited csv file. However, the target can only process an Excel file (.xls). How can I generate an Excel in XI?
I saw this blog, but I don't know how to create a XSLT transformation.
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
Any help would be appreciated. Thanks.

Here are the steps I took to create an XSLT transformation in XI 3.0:
1. I created my source and target XSDs using XMLSpy.
2. I created the XSLT mapping from source to target in XMLSpy (referencing the souce XSD schema).
3. I created another XSLT mapping to format the target into Excel XML.
4. Import the source and target XSDs in the IR's External Definitions
5. Zip each XSLT mapping (.xls) and import it into the IR's Imported Archives
6. Reference the XSL mappings in the Interface Mapping

Automatic import of material data (csv file) from FTP directory

Hello Experts,
We created a Scheduled Task -> Data Import Monitor -> from a FTP directory.
We loaded the .csv file with material data in the FTP folder but it is not getting imported.We have created the .csv file with the format of fields defined in Company quick start Work book -> Material tab. We also tried with a .csv file having first Field as CLASS_NAME with a value of masterdata.Material and rest of the fields same as defined in the Company quick start-Materials Tab still it did not work.
When we load the .xls work book in FTP directory (xl having the Configuration tab and Material tab) the data import is working fine and the data is getting loaded automatically from the data import monitor job.
Is there any specific format of .csv file in which the material data needs to be loaded to the FTP server for automatic import of data using Scheduled task?
Regards
Aditya

Are there any errors appearing in the FPA logs?
Have you checked the permissions on the folder/file that you are uploading from?
What type of scheduled task have you created?

Read a csv file in a PL/SQL routine with the path as a parameter

hello oracle community,
System Windows 2008, Oracle 11.1 Database
I have created a directory in the database and there is no problem to read a csv file from there. Since the files can be at different places, my java developer is asking me, if he can give me the path of the file as a parameter. So far I know I will need a directory to open the file with the UTL_FILE package, but I cannot create diretories for folders, that will be created in the future. Is there any way to solve that problem, so I can use the path as a parameter in my routine ?
Ikrischer

BluShadow wrote:
Ikrischer wrote:
as I said before, they are dynamic. As usal to most other companies, you get new partners and you will lose partners, so new folders will be added, old ones will be deleted. if you use different directories for different folders, you have more work to handle them.I wouldn't call that dynamic, I would call that business maintenance. Dynamic would mean that the same company is putting their files into different folders each time or on a regular basis. If it's one folder per company then that's not dynamic.the folder structure is changing, I call that dynamic, does not look static to me. but thats just a point of view, it is not important how we call it. lets just agree, the folder structure will change in the future, no matter how many folders one partner will have.
BluShadow wrote:
So you're receiving files and you don't even know the format of them? Some of them are not "correct"? Specify that the company must provide the files in the correct format or they will be rejected.
Computers work on known logic in most cases, not some random guessing game.we know the correct format, but we also know, that the partner wont always send the correct format, period. Cause of that we want to deliver an error log, record 11,15 and 20 is wrong cause of....that is a very usefull service.
BluShadow wrote:
The folders should be known.impossible, we do not know the future.
BluShadow wrote:
The file format should be known.see above, it has a fixed format, but thats not a gurantee you get the correct format. for me thats a normal situation, it happens every day, you have fixed rules and they will be broken.
BluShadow wrote:
The moment you allow external forces to start specifying things how they want it then you're shooting yourself in the foot. That's not good design and not good business practice.maybe we are talking about different things, we do not allow to load data into our system with a wrong format. but we do allow to to send us a wrong format, and even more, we do allow them to send wrong content, but still we dont load it into our system. format and content must be correct to be loaded in the real system, but both we are checking. and with external tables you cannot check a wrong format we a detailed error log.
Ikrischer

How to Read a CSV file using pure PL/SQL

Hi friends - Is there a possibility to read a .TXT/CSV file from a local machine and display the contents on the form fields each record at one time.
The logic to flow through the records can be build, but the problem is where to begin from to start reading the file using PL/SQL. I don't want to use any third party component/API as such. Is there any way in forms by using PL/SQL to read an external CSV file and interpret the contents.
I have read about SQL * Loader on some sites but cannot find any way to invoke it on windows platform. There seems to be UNIX commands to invoke the .CTL file that is used by SQL Loader. Any help is much apreciated.
Rgds

Hi Thanks for your replies, TEXT_IO seems to be a solution but not very comprehensive as it provides limited exposed functions to perform complex operations while read and write of files.
I think SQL*Loader is a valid solution, but as I stated in my original quote Im not able to invoke it from the command prompt. The command that is shown on the suggested URL(http://www.orafaq.com/faqloadr.htm) is not found on my machine. I have Windows 2K installed. Is there a seperate patch or a download available from where I can get that .EXE to invoke the utility.
Thanks..

Issue when creating a CSV file

Stupid issue but I've tried to fix it all day and it's not working...
I need to create a CSV file made up of 3 columns, 2 number and 1 char. The char column is a company name that has spaces in it. When I run the query in SQL Developer, the char column looks fine. When I run in in BiPub as a CSV, I get double-quotes around the char column. It looks fine if I would look at it as DATA or any other format.
I can't use the REPLACE function because there's nothing wrong with the data.
We're using BI Pub v.10.1.3.4.
Any thoughts?
Thanks!!
Kris

First I tried using a basic rtf file and just selected CSV as the type. Then I tried using the 'e-text template' and selecting CSV, same result. Now I'm trying to use an .xsl file instead of a .rtf to see if that works.
Kris

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

Creating a CSV file from a pl/sql procedure

Similar Messages

Maybe you are looking for