Creating a custom task that pulls an SCCM report

I currently have a custom task in SCSM that uses the web address of an existing ECCM report to list all computers with username. I want to make another task taht will allow the tech to enter the computer name and get the list of installed software from
SCCM. Using the iexplore.exe and the parameter address of the report doesn't allow them to enter the computer name, or to change it. That prompt normally comes up in SCCM before it opens the browser window, so I am not sure how to put that in as a parameter.

Are you using the executable exe file and the filename as a parameter in the custom task?
Andreas Baumgarten | H&D International Group

Similar Messages

Creating a Custom Task for an external application

Hi
I want to create a custom task for our records management system, that just opens a particular file people use from within Incident Management every day.
The file is of extension .tr5 (which is our records management tool). I can open the file on my desktop. When I create the custom task, using the same file - I get a message ' The specified executable is not a valid Win32 application'
I can open the application fine using the custom task, but not the file.
Could it because there is no relationship from SCSM to the file type?
Any suggestions are appreciated.

Are you using the executable exe file and the filename as a parameter in the custom task?
Andreas Baumgarten | H&D International Group

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

How can I create a custom formula that checks if a PC file exists? (CR10)

Post Author: lgayosso
CA Forum: Formula
Hello,
I need to create a formula that validates whether a PC file exists or not to display a message ('File Found' or 'File not found'). I created a custom formula that displays the appropriate message based on a report field composed of the FilePath + FileNameWithExtension that works correctly if the field includes a value or not (Basic Syntax below):
If {ctDocumentImages.ImgPath} <> "" Then Formula = "File Found"Else Formula = "File not found"End If
Now I want to validate that the {ctDocumentImages.ImgPath} value corresponds to an existing file; that is, I need to check that the file specified at {ctDocumentImages.ImgPath} location truly exists to determine that the file is actually 'found'. How can I accomplish this?
Any help is greatly appreciated,
Lucio

Post Author: lgayosso
CA Forum: Formula
[email protected]:
( my file connection name was CrystalReports_Reports.File Name) I have generated a report, that shows all my rpt file names, size, last updated.... etc )
Go to database expert, create new connection, select file system data, your starting directory will be
genplex\E\JEMS51_Server\Imaging\Int\2007\..... you can then report on the file names found in that directory / subdirectory, etc... When creating the link you can select all files, or just *.rpt for example
Ok, so you define more than one connection on your report to be able to access the File System Object, right? The problem is that my reports are generic and meant for distribution for customers where no generic base folder will exist. The value of the starting directoy is then unknown, FilePath+Name then can be any value.
Lucio

How can I create a master PDX that pulls from multiple other PDXs?

I process aviation maintenance manuals, with the individual manuals having their own PDX. How can I create a master PDX that pulls from the individual PDXs?
I have access to myriad versions of Windows and Acrobat so there's that...

I’ve got 100s of manuals each with their own PDX. I’ve been asked to create a master PDX that in effect combines all of the individual PDXs into a single (cross-manufacturer, cross-fleet, cross-manual-type) searchable PDX that can be easily updated.

Create task from conversation thread in news feed - Task must be created in custom task list

Hi All,<o:p></o:p>
Have a new requirement
were user should be able to create a task for himself from a conversational
thread in News feed.<o:p></o:p>
In
SharePoint 2013 we have a functionality where we can follow up on a
conversation and it creates a task in My Tasks which is in My site.<o:p></o:p>
But my requirement
is to create a task in Tasks list in same site collection on click of follow
up.<o:p></o:p>
I have
tried one approach as below :<o:p></o:p>
My Tasks in
My site is an aggregated view of all tasks assigned to the logged in user. When
i follow a task in News feed a personal task is created in My task
(WmaAggregatorList_User internal name) list. When i Edit the personal task and
change the Projects
drop down to the required Project Name and Check -"Make this task public to project
members" it just creates a task is specific Site and moves
the task.<o:p></o:p>
I tried to
find if Projects and Check box are columns of Task list , but did not find any
columns.<o:p></o:p>
I am trying
to create a event receiver which would make these columns be set to Site Name
and check box checked so that when user creates a task it will directly move to
Custom Task list.<o:p></o:p>
Please
guide <o:p></o:p>
Thanks in
Advance<o:p></o:p>
Pallavi

Thank you for your responce. I used a content query wp to rollup only the Major Milestones, but am unable to overlay the results to a calendar.. The link you provided is for overlaying different task lists onto a calendar, but does not detail how to
overlay the results from the content query onto a calendar.

How would one Create a "Custom Cursor" that can move BEHIND certain layers?

In terms of Flash expertise I am on the the doddering divkid level -- but have mananged to create a custom cursor; a hand that I want to move about over most layers but under one specific layer. Currently, no matter the layer order, when published the cursor image jumps straight to the top.
Is there a property I can imbue in the would-be "top" layer or a way of editing or modifying the custom mouse cursor actionscript that would bring about the desired result?
Many thanks in advance for your time and expertise...........................peace

you can easily attach the cursor between the specific layers you want using an empty movieclip and add your cursor movieclip to the emptyMC using the class name. Look at the screenshot and follow the code. it works
and here is the code:
import flash.display.MovieClip;
var whytehand:MovieClip=new cur();
emptyMC.addChild(whytehand);
emptyMC.mouseEnabled = false;
emptyMC.addEventListener(Event.ENTER_FRAME, fl_CustomMouseCursor_5);
function fl_CustomMouseCursor_5(event:Event)
emptyMC.x = stage.mouseX;
emptyMC.y = stage.mouseY;
Mouse.hide();
Thatz it!

How can I create a custom step that does nothing but make calls to a dll

What I'd like to end up with is a Custom step that
1. Takes several string parameters
2. Makes several calls to functions in a DLL
3. Returns and stores error codes returned from the function
I've been through the KB article "How Do I Make a Custom Step Type".
This got me about halfway there; while helpful, it didn't provide a
reference for some of the questions I had, specifically:
1. What sort of sequence action type should I start with (to use as a template)?
2. If I start with a "Call Executable", do I need to specify the module when I incorporate the step into the sequence?
3. How does one pass parameters in and out of a custom step type?
4. How does the step type report progress/errors to the report?
Thanks in advance.
Mike

Hi,
To interface to a DLL you will need to use either the DLL Adapter or the CVI Adapter, not the Call Executable adapter.
Have you been through the Using LabWindowsCVI with TestStand manual. This should answer all your questions, all the chapters are relevant.
Regards
Ray Farmer
Regards
Ray Farmer

Can I create a Master PDF that pulls field values from multiple PDFs?

I am designing a tracking system for a class and want to have the student fill out a basic information form that tracks personal information and individual test grades. As an administrator, I want to have a master list that can track the entire class and pull in their grades, calculate class average, and order them accordingly. Ideally, it would pull from a folder of these student PDFs.
Does Adobe have a way to do this? I have LiveCycle and Acrobat Pro.

Thanks for the very prompt answer! That seems like it sort of does what I want - however, once I leave the course, I want to have the system continue to work - and future Admins probably wont have access to Acrobat Pro, or the technical knowledge to send out looking for responses. Nor is there a sharepoint (or equivalent drive) to set. Perhaps some further explanation is required.
There are multiple classes going on at one time, and each class gets a folder on a standalone machine, with a different Admin in charge of each class. When one graduates, another one fills in behind them a week or so afterwards. So what I need is a "template" file for student data, and a template "Master list" that pulls from all of the student data PDFs in that folder, locally, without the Master list having to send out requests for information. That way, when a new class starts, the students can email in their student data, the Admin can pop them all in a folder with a blank Master List template, and when the admin opens the Master list, it populates with all the data from the student sheets.
Hopefully that is a little clearer, and hopefully doable! It really needs to be pretty darn simple. We used to do it in Excel, and gave each student a tab where we copy/pasted their basic data - and a crosslinked sheet pulled it into the master list. Alas, that looked unprofessional and sometimes was very troublesome when the students altered the Excel form in any way or put things in the wrong cells.
Thanks!

I created a custom ringtone that shows up as a ringtone but isn't on phone!

I created a custom ringtone, 22 seconds. All went well - it appears as a ringtone in my itunes music, and in itunes, under my phone (3g), as a ringtone. After several attempts at syncing (have never had a problem syncying anything), it does not appear under settings, general, sounds, ringtones. Can anyone help?

I think i've found the answer
In "music" my ringtones had also been added but with a "!" next to the ringtone. When you click on this the message reads something like "cant find location"
If you delete all the ringtones in "music" (the ringtones in "ringtones" don't get deleted") then sycn the phone then all my ringtones transfered to my Iphone
Yay

Creating a custom workflow that copies events in a calendar to another one

Hello,
I was looking for a
Calendar displayed in having some
items from B to A.
calendar
So, I suppose That I
can run a workflow That
Automatically copies specific events
calendar and paste it in
B.
This is the step-by step
of the procedure I executed:
First, I checked That
Both calendars have exactly
the same columns.
Then I added an yes
/ no column in A Calendar
called "Rollup".
Since I'm a new SPD in the
whole world, I Decided
to use the 2010 plattform,
beacuse in the 2013 version
I couldnt find the "Copy
Item" Action.
I developed a list workflow
attached to Calendar A That Says:
Condition: If Current List:
Rollup equals Yes
Action: Copy Item to
Current Public Calendar
For an unknown reason, This
workflow always displays an error, Therefore
Accomplished never its purpose.
Does anyone have an idea what I
am doing acerca wrong?
Or knows a better workaround
for syncing two calendars?
Thanks for the help !

Hi Corina,
For achieving your demand, you can create a SharePoint 2013 Workflow for Calendar01 as below and it works fine in my test:
Best Regards,
Eric
Eric Tao
TechNet Community Support

I ordered the CS5.5 Design Premium, and InDesign will not install because, although my computer is 64 bit capable, it is currently set at 32 bit. Is there a way I can create a custom installation that will allow me to install products that require a 64 bi

Any guidance would be greatly appreciated. I am financially impaired (nice way of saying "poor"), and cannot afford to purchase any more upgrades for my system or another version of InDesign.
I am sure there must be settings that will allow me to install the program, possibly with limited functionality due to this issue. I am disabled and cannot work outside of my home. I was hoping to make a small income freelancing with this package, and InDesign is a crucial part of the package.
Thank you very much for any assistance.
Kara Bismarck
<email removed-kglad>

So I would have to uninstall Windows 7 Home Premium and reinstall it as 64-bit? I'm trying to do this without having to reformat my computer. Is there a way I could create a 64-bit partition on my secondary hard drive without reinstalling the OS?

How to create a custom pattern that tiles without borders

I know that I can save a pattern as a swatch and use it as fill, but how to create a shape that tiles without borders?
My pattern now has closed paths on its edges which show up in the tiling. I don't know how to create it with open paths.
Thanks for your help!

rahneo,
As I (mis)undersatnd it, you may Direct Select and delete the unwanted path segments.
Deselect first before (each time) you do it.
Otherwise, you may create a nofill/nostroke rectangle covering the exact part you wisg to have in the tile and bring it to the bottom of the stack of objects that forms the tile.

Tutorial on creating a CR webservice that serves up many reports?

I found this one, but it is very out of date: http://resources.businessobjects.com/support/communitycs/TechnicalPapers/crnet_serverfile_deployment.pdf
Is there a newer version that shows how to work with the ServerFileReportService object?

Hi Aaron
The only real update to that dos would be the location of the the CR runtime files as this depends on the version of CR - which is not mentioned in your query. Other than that, all the rest should be valid.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Can I create a custom SCSM task that runs on the server?

I'm new to SCSM (got roped in as the developer/Powershell guy). I see instructions for adding a custom task to SCSM, which I know generally run from the user's console, under their security context. I also found a reference to "runtime tasks" which
run from the server. Is there a way for me to make a custom task that runs from the server?
If it helps, I'll be creating a task that implements the Poweshell script found
here that converts an incident to a service request. I'd much rather the conversion take place on the server so that we don't need to deploy the SMlets Powershell module (and another dependency) on each user's workstation.
Thanks!

I'm new to SCSM (got roped in as the developer/Powershell guy). I see instructions for adding a custom task to SCSM, which I know generally run from the user's console, under their security context. I also found a reference to "runtime tasks" which
run from the server. Is there a way for me to make a custom task that runs from the server?
If it helps, I'll be creating a task that implements the Poweshell script found here that converts an incident to a service request. I'd much rather the conversion take place on the server so that we don't need to deploy the SMlets Powershell module (and
another dependency) on each user's workstation.
Thanks!
Not sure what capabilities you have, but would something like this be useful?
http://scsmlab.com/2013/12/09/how-to-create-a-custom-scsm-console-task-by-using-some-c-and-xml-magic/

Creating a custom task that pulls an SCCM report

Similar Messages

Maybe you are looking for