Creating a new Inventory Org with predetermined ORG_ID

Hi,
We are in the process of Re-implementing 11.0.3 system to R12. In 11.0.3 there are some external systems talking to inventory organizaions based upon the ORG_ID. (Which is hard coaded in external system)
Is there any way by which while creating new Inventory Organization in R12, we can retain the old ORG_IDs? If not, how safe teh backend update will be?
Any help will be highly appreciated.

This will be delicate and you will have to practice it well but it can certainly be done.
Couple of options.
1) Just before going to the form, set the current_value of the HR_ORGANIZATION_UNITS_S appropriately.
2) Open the form and just before saving a new org, use help > diagnostics > examine to look at the value of the organization_id. If it is populated, change it. If it is not populated, then this option is not possible.
3) Put a trace on the form; find which tables are hit with an insert and then write a pre-insert database trigger to change the value of the organization_id. Drop the trigger(s) immediately after saving the new organization.
Let me know if you need more help.
Sandeep Gandhi
Independent Techno-functional consultant

Similar Messages

  • Create a New Po Ship-To field...for a new Inventory org

    Hi..
    Created a new Inventory Org..Now i am trying to create a PO in this inventory Org...i am trying to put the ship to field to the new org...but the new inventory org is not in the list of values
    Does the invnentory org need to be configured to be able to have the ship-to use the new inventory org

    Go to Master Item Form query the Item. Navigate to Organization Assignment widow and Check mark the new org you have defined. Hope it will solve your issue.

  • Add a new Inventory org

    Hi Guys
    please assist me,with the following
    what would the impact be if;
    1.) add a new inventory org after been live for 5 years?
    2.)makin the cost of the new inventory org standard and the other inventory org is average?
    thank you in advance

    1.) No impact whatsoever. You will have to make sure you do all configurations for that org depending upon the functionality you plan to use (such as inventory parameters, wip parameters, planning parameters, subinventories/locators etc.) See if you can use the Copy Organization functionality to create the new org.
    2.) This is also completely supported.
    Hope this helps
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant
    513-325-9026

  • I created my Apple ID in Ireland, but would now like to switch to a German Apple ID, keeping the same email address. How do I delete my old Irish Apple ID, so I can create a new German one with the same email?

    I created my Apple ID in Ireland, but would now like to switch to a German Apple ID, keeping the same email address. How do I delete my old Irish Apple ID, so I can create a new German one with the same email?

    Welcome to the Apple Community.
    Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
    In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
    You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support.

  • My usual iCloud account has been locked out.  I tried the email link - didn't receive an email.   So I created a new Apple ID with another email but now I can't access my other Apple ID Mail, etc..

    My usual Apple ID/iCloud account has been locked out.  I tried the email link - didn't receive an email.   So I created a new Apple ID with another email but now I can't access my other Apple ID Mail, etc..  How do I get the Apple ID I want to use working again?   Help. 

    Hi JkeeneSoldano,
    Thank you for visiting Apple Support Communities.
    To regain access to your Apple ID, try to reset your password using one of these methods:
    Answer your security questions. Use these steps if you know the answers to your security questions.
    Use email authentication. We'll send you an email that you can use to change your password.
    Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
    From:
    If you forgot your Apple ID password - Apple Support
    If you need to use the email verification method but don't receive the reset email, see this link for more help:
    If you didn't receive your verification or reset email - Apple Support
    Best Regards,
    Jeremy

  • SharePoint Designer 2013 (2010 Platform Workflow) - How can I create a new list item with a SPECIFIC content type?

    In SharePoint 2010 I created workflows that used the 'Create list Item' Action, which then set the Content Type ID (so I could create documents of various types in a document library). 
    We just switched to the SharePoint 2013 platform, and now the drop down for Content Type ID is blank in all of the workflows that are still using the SharePoint 2010 platform.  Is there any way to create a list item with specific content
    type?  Even if I could just input a string into that field instead of using this blank drop-down.  Please help! 

    Hi Sarah,
    According to your description, my understanding is that you cannot create a new list item with a specific content type using SharePoint 2010 Platform Workflow.
    I tested the same scenario in my environment, and the Create List Item worked fine with the specific content type.
    How did you create the content type?
    Please check if the content type is added to the list/library the workflow associated with.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

    How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
    Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

    May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
    Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
    If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
    Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
    Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
    Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
    The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
    Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
    I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

  • LIBOVD ERROR  - "validateContextToken: workflow session was not found for given context. Create a new workflow session with token"

    Hello everyone,
    I have the following scenario:
    We're using "Oracle SOA Suite 11g 11.1.1.7.0" (Patched w/ 17893896) mainly for a BPM/Human workflow composite. Former, we were having the error bellow:
    <Mar 16, 2015 1:13:03 PM BRT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Verification Service cannot resolve user identity. User weblogic cannot be found in the identity repository. Workflow Context token cannot be null in request.
    ORABPEL-30511
    When that error ocurred, no one was able to use the system (BPM/Human Workflow).
    I opened an SR, and after some analysis from the support, it recommended me to set up "virtualize=true" in EM, and restarting the domain. Then it started logging the following:
    connection to ldap://[10.200.10.57]:7001 as cn=Admin.
    javax.naming.NamingException: No LDAP connection available to process request for DN: cn=Admin.
    Looking up on support KB, I found this note Doc ID 1545680.1 and increased from Max size of Connection Pool 10 to 200. That did work successfully! Problem now is that the <SERVER>_diagnostic.log is being filled up with the following error:
    [2015-03-31T16:03:46.421-03:00] [soa_server2] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e0194e38aa6c9a2f:39fc1ff9:14c5def5247:-8000-00000000000a5653,0] [APP: soa-infra] <.>    validateContextToken: workflow session was not found for given context. Create a new workflow session with token=51490173-e3d0-41dd-ae99-983915aa8454;;G;;Z+P7Oe9ABnoTUQD9ECryEW2l0/8yRcqPDyZsOWBCuzMmRgA3Qsj601TxmWQ87z2MjuwW5AH+KzgjIwkPmhJFdpc1FrE6Y/MrN1bxIDHJWu2/zP3iSNwKD07hRrh/U37Ea0TvaQyuaHJIog9y3Ptmzw==
    One important point is that we're using only the embedded WLS ldap. So I am not 100% sure if we should be using the virtualize flag=true, once all docs I read point out that this should be done when using multi-ldap providers.
    Also, I only got this error in the "diagnostic.log".
    Although, no user has complained about using the system, I really want to work it out. Anyone has any suggestions?
    Thanks in advance!

    I have moved your thread from Certification to SOA Suite to get proper assistance.
    Thanks,
    Lisa

  • TS2972 My computer crashed and the hard drive is no longer.  I have purchased a new laptop but now have no access to my old itunes library.  My laptop has created a new itunes account with NOTHING in it?? My Itouch has everything loaded but it wont sync

    My computer crashed and the hard drive is no longer.  I have purchased a new laptop but now have no access to my old itunes library.  My laptop has created a new itunes account with NOTHING in it?? My Itouch has everything loaded but it wont sync with this itunes account....HELP

    - Transfer iTunes purchases:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    newer copy
    - Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the iPod backup that iTunes makes does not included synced media like apps and music.

  • I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
    And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
    LN
    PS you also need to update your profile - it states that you have OS X 10.6.8

  • How to create a new user aaa with same rights as existing user bbb ?

    Assume user bbb already exists in Oracla 10g database.
    How can I create a new user aaa with the same rights/permissions as the old user bbb?
    Is this procedure/command also working if the old user is user "system" (=dbadmin)?

    There is some possibilty to generate a EXPDP dump file which contains only DDL statements related to account and
    privileges: EXCLUDE/INCLUDE parameter can help.
    For example, following EXPDP statements seem to work with SYSTEM account:
    expdp / schemas=system content=metadata_only exclude=table,sequence,package,function,procedure,synonym,,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
    Export: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:41:36
    Copyright (c) 2003, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Starting "OPS$XXX"."SYS_EXPORT_SCHEMA_01":  /******** schemas=system con
    tent=metadata_only exclude=table,sequence,package,function,procedure,synonym,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
    Processing object type SCHEMA_EXPORT/USER
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    Master table "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully loaded/unload
    ed
    Dump file set for OPS$XXX.SYS_EXPORT_SCHEMA_01 is:
      C:\TEMP\SYSTEM.DMP
    Job "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully completed at 09:41:41
    impdp / sqlfile=dpd:system.sql dumpfile=DPD:system.dmp logfile=DPD:system.logImport: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:42:46
    Copyright (c) 2003, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Master table "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully loaded/unload
    ed
    Starting "OPS$XXX"."SYS_SQL_FILE_FULL_05":  /******** sqlfile=dpd:system
    .sql dumpfile=DPD:system.dmp logfile=DPD:system.log
    Processing object type SCHEMA_EXPORT/USER
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    Job "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully completed at 09:42:50and system.sql is:
    -- CONNECT OPS$XXX
    -- new object type path is: SCHEMA_EXPORT/USER
    -- CONNECT SYSTEM
    ALTER USER "SYSTEM" IDENTIFIED BY VALUES '970BAA5B81930A40'
          TEMPORARY TABLESPACE "TEMP";
    -- new object type path is: SCHEMA_EXPORT/SYSTEM_GRANT
    GRANT GLOBAL QUERY REWRITE TO "SYSTEM";
    GRANT CREATE MATERIALIZED VIEW TO "SYSTEM";
    GRANT SELECT ANY TABLE TO "SYSTEM";
    GRANT CREATE TABLE TO "SYSTEM";
    GRANT UNLIMITED TABLESPACE TO "SYSTEM" WITH ADMIN OPTION;
    -- new object type path is: SCHEMA_EXPORT/ROLE_GRANT
    GRANT "DBA" TO "SYSTEM" WITH ADMIN OPTION;
    GRANT "AQ_ADMINISTRATOR_ROLE" TO "SYSTEM" WITH ADMIN OPTION;
    GRANT "MGMT_USER" TO "SYSTEM";
    -- new object type path is: SCHEMA_EXPORT/DEFAULT_ROLE
    ALTER USER "SYSTEM" DEFAULT ROLE ALL;
    -- new object type path is: SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    BEGIN
    sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'BAS002.REGRESS.RDBMS.DEV.US.ORACLE.COM', inst_scn=>'1456160');
    COMMIT;
    END;
    -- new object type path is: SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    BEGIN
    SYS.DBMS_AQ_IMP_INTERNAL.CLEANUP_SCHEMA_IMPORT;
    COMMIT;
    END;
    / These export and import steps don't take into account privileges granted on schema objects belonging to another user likely due to to the EXCLUDE statements.
    Message was edited by:
    Pierre Forstmann

  • Tables for creating a new sales order with reference to another

    Hi Experts
      In ABAP, how can identify that  I'm creating a new sales order with reference to another in the userexit read_document??, In which tables is this information??.
    Thanks
    Regards

    In Table VBFA there are two fields
    a)  Preceding Document  and
    b)  Subsequent Document category
    Based on the above two fields, you can conclude that sale order is created with reference to a preceding document.
    thanks
    G. Lakshmipathi

  • I want to create a new apple id with another email, It says email already in use...

    I want to create a new apple id with another email, It says email already in use, but there is no account with that email( i use it for facetime and get apple offers) What do i do?

    You can check to see if it is associated with one of your IDs by following this: http://support.apple.com/kb/HT5625, and entering the email address at step 2 to see if it finds an ID owned by you.  If it doesn't, contact the Apple account security team and have them check into it by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Apple ID account security.

  • How can I create a new Care Plan with one or more care tasks

    Hello,
    I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
    Following code works fine:
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    this.PersonInfo.SelectedRecord.NewItem(plan);
    It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
    https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
    Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
    https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
    So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
    <tasks>
    <task>
    <name>
    <text>Run 100 miles</text>
    </name>
    <description>Run 100 miles in 6 months</description>
    <start-date>
    <structured>
    <date>
    <y>2013</y>
    <m>12</m>
    <d>1</d>
    </date>
    </structured>
    </start-date>
    <end-date>
    <structured>
    <date>
    <y>2014</y>
    <m>6</m>
    <d>1</d>
    </date>
    </structured>
    </end-date>
    <target-completion-date>
    <structured>
    <date>
    <y>2014</y>
    <m>12</m>
    <d>31</d>
    </date>
    </structured>
    </target-completion-date>
    <sequence-number>279128532</sequence-number>
    <recurrence>
    <interval>
    <text>Once</text>
    </interval>
    <times-in-interval>10</times-in-interval>
    </recurrence>
    <reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
    </task>
    </tasks>
    Any help is welcome 
    Wilfred

    Hi Wilfred,
    Have you tried this?
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    plan.Tasks.Add(someTask) 
    If you have a task list already, you would need to enumerate through it and add one by one...
    foreach (var task in existingList)
        plan.Tasks.Add(task)

  • Assign all Items from Item Master to a New Inventory Org

    Hi Gurus,
    Currently we have 1 Item Master Org and 7 Child Orgs in our system. We are adding one more Child Org into our system. How to assign all the Items at once from Item Master to the new Child Org? We have Oracle EBS R12.
    Thanks in advance.
    KM

    Hello,
    In 11.5.10.2 our developer added new organization to items:) I think in R12 you do not have any standard function.
    Regards,
    Luko
    Ps. Look also http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/item-assignment-to-orgs-in-inventory-r12-4688011
    Edited by: Luko on 2012-08-20 22:17

Maybe you are looking for