Creating a numerical table multiple precision

Hi,
I am kinda new at this but I was wondering if it was possible to create a numeric table with multiple precisions. To explain better, I have a table with two columns and I would like the first column to be with precision zero and the other with precision 2.
Attached is the Vi that I was using where I converted the string from the table to a numerica array, converted the values to the required precision I wanted, and then converted the numeric array back into a string to place in the table. However this caused labview to keep crashing on me, indicating "Fatal Internal Error : " transact.cpp", line 1323"
Some other options I have tried are using the key down? event option that forced the user to only type in numbers in the table, however I still had no control over the precision. I have also tried to use flat sequences, etc... but to no avail.
Thanks in advance for any help
Reza
Attachments:
table.vi ‏19 KB

Well, "delete from array" is probably not the right tool to get two colums of a 2D array, right? Use "index array" instead.
Or you could just do autoindexing as in the attached code draft.
(btw: I cannot duplicate the crash with your VI. Any special instructions?)
Message Edited by altenbach on 07-10-2007 02:32 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
tableMOD.png ‏8 KB
tableMOD.vi ‏17 KB

Similar Messages

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

CREATING A FORM UTILIZING MULTIPLE TABLES

I'd like to know if it's feasable to create a form using multiple tables and if so, how?
Thanx

sgtmaj,
It's feasible. You'll have to create the form manually. This part of the documentation describes how that's done.
http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b16373/bldapp.htm#sthref960
Sergio

IWork Numbers program. I am trying to create a 'Master Table'. The table will be used on numerous sheets, when cells altered on the 'Master' it will show on all sheets using the Master table. Is this a possibility??

iWORK NUMBERS
I am trying to create a 'Master Table'. This table will be used on numberous sheets, however not all. Items entered into the cells in the Master Table will then reflect in the used sheets that have the Master Table linked.
On the individual pages however, they will be able to be altered purely for that page.
Hope I have explained myself clearly,
Would appreciate any help,
Cheers,

Hi Hilary,
The formula in the Index column of the Main table is:
E2: =IF(A,MAX($E$1:E1)+1,"")
Fill down to the end of column E.
The Breakout table contains a single formula:
A2: =IF((ROW()-1)>MAX(Main :: $E),"",OFFSET(Main :: $A$1,MATCH(ROW()-1,Main :: $E,0)-1,COLUMN()))
Fill down and right to fill the table.
For multiple rooms (with different data transfered to each) you'll need a column of checkboxes and a corresponding index column for each room.
The index columns can be hidden.
Contents in individual cells in the breakout tabel(s) can be entered directly, replacing the formula. To retun to the calculated result, select a cell adjacent to the one where text was entered, and drag the Fill control handle (small circle, bottom right of the selection rectangle) to fill the formula back into that cell.
Regards,
Barry

Create object type from multiple tables for select statement

Hi there,
I have 3 tables as given below and I wish to create an object type to group selected columns as 'attribute' from multiple tables.
I need to create 2 input parameters to pass in - 'attribute' and 'attribute value' in PL/SQL and these 2 parameters will be
passing in with 'column name' and 'column value'. e.g. 'configuration' - the column name, 'eval' - the column value.
Then, the PL/SQL will execute the select statement with the column and column value provided to output the record.
Pls advise and thank you.
table ccitemnumber
name                           null     type
ccitemnumber                   not null varchar2(20)
configuration                           varchar2(20)
item_type                               varchar2(30)
table productmodel
productmodelnumber             not null varchar2(6)
description                             varchar2(60)
accesstimems                            number
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
table topmodel
stmodelnumber                  not null varchar2(30)
productfamily                           varchar2(60
formfactor                              varchar2(10)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapacity_uom                   varchar2(20)
object type in database
configuration                           varchar2(20)
item_type                               varchar2(30)
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapac

user12043838 wrote:
Reason to do this as these fields are required to be grouped together as they are created in different tables. They are treated as 'attribute' (consists of many columns) of the part number. So, the PL/SQL is requested to design in a way able for user to pass in the column name and column value or part number, then the select statement should be able to query for the records. Another reason is a new column can be added easily without keep modifying those effected programs. Reuseable too.This basically equates to ... hard to code, hard to maintain, and poor performance.
Are you really sure you want to do this? This isn't going to be easy-street as you seem to think it is, but it's a one way street to a poorly performing system with security vulnerabilities (google SQL Injection).
I would highly recommend you reconsider your design decision here.

Can we create single External Table for multiple files?

HI,
Can we create External table for multiple files? Could anyone please explain it.
Thanks and regards
Gowtham Sen.

to merge 16 files having same structureWell, if files have the same structure, as per the reading of the example from the following documentation, you can create one external table for all your files :
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14231/tables.htm#i1007480
Nicolas.

Creating a datablock from multiple tables

Hi
I have a situation in which. There are two tables with the same set of columns and same names. when creating a block ,rows from both these tables have to populated into Form.
(for example... One table represents expired details and the other one with valid details)
Form accepts runtime parameters and displays the records. Any idea how to solve this. Please offer your suggestions
Thanks
null

As ivar said if u create view and use then u cant update the values. One alternate solution is do manually. First of all why do u need to put both the base tables in a single block. Create 2 blocks corresponding to two expired and valid base tables. You can very well display both the information from 2 blocks in the same Form. Just get the user input and query manually. When u create two base table blocks Oracle will take care of the querying/inserting values from tables though both might have same column names. I hope this helps.

How to Create a Temporary Table with SQL Server

I know you can create a temporary table in SQL Server 2000, but not quite sure how to do it in CFMX 7, i.e., does the SQL go inside a <CFQUERY dbtype="query"> tag?
I'm pulling the main set of records from an Oracle server (1st data source), but it does not contain employee names, only employee IDs. Since I need to show the employee name along with the Emp ID, I'm then pulling a list of "current" employee names from a SQL Server (2nd data source), which is the main database on our CF server.
I've got a QofQ that works fine, except it only matches EmpIDs that exist in both result sets. Employees who are no longer employed, don't match, and don't display. Since I can't do a LEFT OUTER JOIN with a QofQ, what I need to do is get the records from the Oracle server into the SQL Server. Preferably in a temporary table.
I was hoping if I could get those Oracle records written to a temp table on the main SQL Server, in same database as the Employee Name table, I could then write a normal <CFQUERY> that uses a LEFT OUTER JOIN.
I think I could probably write a Stored Procedure that would execute the SQL to create the temporary table, but am trying to avoid having to write the SP, and do it the simplest way.
This query will be a program that can be run hundreds of times per day, with a form that allows users to select date ranges, locations, and other options. That starts the queries, which creates the report. So I just need the temp table to exist only until all the SQL has run, and the <CFOUTPUT> has generated a report.
If the premise is right, I just need some help with the syntax for creating a SQL Server temp table, when you want to write records to it from an external data source. I'm trying the following, but getting an error:
<CFQUERY name="ITE_Temp" datasource="SkynetSQL">
CREATE TABLE #MyTemp
( INSERT INTO #MyTemp
ITE2.TrueFile char (7) NOT NULL,
ITE2.CountOfEmployee int NULL,
ITE2.DTL_SUBTOT decimal NULL,
ITE2.EMPTYPE char (3) NULL,
ITE2.ARPT_CD char (3) NULL
</CFQUERY>
So I actually created a permanent table on the SQL Server, and wrote the below SQL, which does work, and does write the records to table. I can then write another CFQUERY with a LEFT OUTER JOIN, and get all the records, including those that don't have matching employee name:
<CFQUERY datasource="SkynetSQL">
<CFLOOP index="i" from="1" to = "#ITE2.RecordCount#">
INSERT INTO ITE_Temp
 (FullFile,
 EmployeeCount,
 DTL_Amount,
 EmployeeType,
 station)
VALUES ('#ITE2.TrueFile[i]#',
 #ITE2.CountOfEmployee[i]#,
 #ITE2.DTL_SUBTOT[i]#,
 '#ITE2.EMPTYPE[i]#',
 '#ITE2.ARPT_CD[i]#')
</CFLOOP>
</CFQUERY>
But, I hate to have to create a table and physically write to it. For one, it seems slower, and doing it in temp would be in memory, and probably much faster, correct? Is there some way to code the above, so that it does something similar, but in a TEMPORARY TABLE? If I can figure out how to do this, I can pull data from multiple data sources and servers, and using SQL Server temp tables, work with the data as if it was all on the same SQL Server, and do some cool reports.
Everything I've done for the past few years, has all been from data from a single source, whether SQL Server, or another server. Now I need to start writing reports where data can come from 3 or 4 different servers, and be able to do joins (inner and outer). Thanks for any advice/help. Much appreciated.
Gary

While waiting to hear back, I was able to write the query results from an outside Oracle server, to a table on the local SQL Server, and do the LEFT OUTER JOIN required for the final query and report to work. That was with this syntax:
<CFQUERY name="AddTableRecords" datasource="MyTable">
TRUNCATE TABLE ITE_Temp
<CFOUTPUT query="ITE2">
INSERT INTO ITE_Temp
(FullFile,EmployeeCount,DTL_Amount,EmployeeType,station)
VALUES
('#TrueFile#', #CountOfEmployee#, #DTL_SUBTOT#, '#EMPTYPE#', '#ARPT_CD#')
</CFOUTPUT>
</CFQUERY>
However, I was not able to write to a temporary table AND read the results. I got the syntax to run to write the above results to a temporary table. But when I tried to read and output the results from the temp table, I got an error. Also, it wouldn't take the single "#" (local) only the global "##" table var, using this syntax. Note that if I didn't have the DROP TABLE in the beginning, the 2nd time you run this query, you get an error telling you the table already exists.
<CFQUERY name="ITE_Temp2" datasource="MyTable">
DROP TABLE ##MyTemp2
CREATE TABLE ##MyTemp2
FullFile char (7) NOT NULL,
EmployeeCount int NULL,
DTL_Amount decimal NULL,
EmployeeType char (3) NULL,
station char (3) NULL
<CFOUTPUT query="ITE2">
INSERT INTO ##MyTemp2 VALUES
'#ITE2.TrueFile#',
#ITE2.CountOfEmployee#,
#ITE2.DTL_SUBTOT#,
'#ITE2.EMPTYPE#',
'#ITE2.ARPT_CD#'
</CFOUTPUT>
</CFQUERY>
So even though the above works, I could use some help in reading/writing the output. I've tried several things similar to below, but they don't work. It't telling me ITE_Temp2 does not exist. It's not easy to find good examples of creating temporary tables in SQL Server.
<CFQUERY name="QueryTest2" datasource="SkynetSQL">
SELECT *
FROM ITE_Temp2
</CFQUERY>
<CFOUTPUT query="ITE_Temp2">
Output from Temp Table 
FullFile: #FullFile#, EmployeeCount: #EmployeeCount#
</CFOUTPUT>
Thanks for any help/advice.
Gary.

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

Error creating user defined tables: Ref count (-1120)

Hi all !
I have to create user defined tables per code, so I wrote 2 main functions, first to create a table (with TableName,TableType and TableDescription properties)and and second to add fields (to a certain table which is sent as parameter).
I call these functions to create multiple tables. For the first 6 tables it works totally ok. But beginning from the 7th table it gives that "Ref count for this object is higher then 0. " (-1120) error. All parameters are ok just as the first 6 tables.
Found such an explanation like below in help files.
The DI API allows only one instance of a meta data object at a time. This maintains data integrity by preventing any manipulation of a business object while modifying the object's user fields. Therefore, verify that no other DI object is active except the meta data object.
But why do I get such an error after sixth call of the function (but not beginning from the second table )?

Gül,
Have you tried doing some grbage collection?
Search for a topic: "Add Usertables and Fields while having a recordset"
HTH
Juha

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

Problem: 1 physical table -- multiple logical table sources

Hi,
I'm quite new to BIEE and setting up my repository.
So I have a question, if the following scenario is possible:
Physical Layer: TABLE_A: COL_A, COL_B, COL_C
TABLE_B: COL_D, COL_E, COL_F
Join TABLE_A.COL_A = TABLE_B.COL_D
In Business Model I have a Dimension Table with TABLE_A as datasource with fields DIM1 (COL_B).
The Fact Table (MEASURE) would have twice TABLE_B as data source with different where-clauses on COL_F and logical table columns (ATT1 and ATT2) of value COL_E.
So far I have created everything and the consistency check shows no errors or warnings, but I get an error in Answer: Incorrectly defined logical table source (for fact table MEASURE) does not contain mapping for [MEASURE.ATT1, MEASURE.ATT2], when I creating an report showing DIM1, ATT1, ATT2.
Isn't it possible to have one physical column used as multiple data source?
I know it 's working, when I create the physical table twice ... but maybe there's a solution for business model.
Thanks
chrissy

Hi mengesh,
that's what I also tried, but it's always returning me the same error.
I know it would work, when I import the physical table twice or more, but that's not what I want to do, because at the end I have 10 or more fields based on this one physical table. There's one field indicating what value is contained in the record, this means:
COL_F | COL_E
1 | customer name
2 | customer number
3 | customer branche
4 | salesman
5 | date
6 | report number
etc.
I don't think it's usefull to import the physical table as often as I need this field. So I want to divide it in business model.
thanks
chrissy

Creating SVG Chart with multiple lines

Hi All,
I want to create a chart with multiple lines.
Ex: I have one emp table with empno, sal and deptno columns.
I want to print deptno in x axis and no of employees on y axis.
I want to print one line for employees with sal > 15000 and one more line for employee with sal =< 15000
So one line will show no of employees with sal more than 15000 for each dept. Similar case for the other line and these 2 lines should be in different colors.
For one line the query will go as
select link, deptno, count(empno)
from emp where sal > 15000 group by null, deptno
Is this possible to draw this chart?
Thanks,
Manoj

I wasn't able to do something like what you describe, but I was able to do this:
I defined column A of the table as a Header Row, selected the cells in the table, and chose this chart type (2D 2 Axis):
Then I clicked the chart and in the pane at the right checked 'Axis Name' in the Axis tab and added the axis names.
Maybe this can give you an idea of how you can illustrate the relationships that you want to show.
SG

Dynamicly creating an internal table with header line

Hi experts,
I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
So far the following line rendered an error that the target internal table doesn't have a header line
read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
(also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
[http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!

Just read the online help:
This statement reads a row from internal table itab.
Or more exact:
This statement reads one row from internal table itab.
Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
At least you have to do what you dont wanna do: looping.

Problem in creating Maintenance Order with multiple operations

Hello all,
I am facing problem while creating Maintenance Order with multiple operations and sub-operations. I am using BAPI : BAPI_ALM_ORDER_MAINTAIN.
For single operation it is working fine,but i am unable to create MO with multiple operations and sub-operations.
Please, provide me the inputs required,
I have used methods :
ORDER CREATE,
OPERATION CREATE
and SAVE.
Regards,
Siddhartha

Hi,
The FM you are using is a perfect one. This FM is bit tricky to use. You need to perfectly pass the Reference number field. which links various input table parameters of this FM.
Thanks & Regards,
Navneeth K.

Creating a numerical table multiple precision

Similar Messages

Maybe you are looking for