Creating Action to automatically set guides

I've looked and can't seem to find a viable solution to my question. I want to be able to create an action or something similar in PS (using CS4 currently) that will automatically set horizontal and vertical guides at .125 on all sides. I can do this if I'm using a document that is always the same size (8.5 x 11) or something of that sort but I don't want to have an action for every possible document size I might be creating. Can anyone help me?

Nope. Seems like the Action recorded the location and name of the dummy file I saved when recording the Action.
Anytime I play the Action, it saves a copy to that same folder with the same name.

Similar Messages

AUDIT action (create, delete, privilege escalation, set and change password from users account and group) users and admins in Solaris 10

Hello.
in Solaris 10 i need auditing process create, delete, privilege escalation, set and change password and etc... from users account and group.
I set settings:
in file syslog.conf:
*.info;mail.none;cron.none;audit.notice            @IP-Remote-syslog-server-SIEM
in file   /etc/security/audit_control:
dir:/var/audit
flags:lo,ad,ex,cc,am,no,fc,fd
minfree:20
naflags:lo
plugin:name=audit_syslog.so;p_flags=lo,ad,ex,cc,am,no
in file   /etc/security/audit_user:
root:lo,ad:no
Now I see in the logs only the fact of a connection via SSH and run processes on behalf of users. Creation. delete users, change passwords for some reason do not is logged.
Many users. For each individual write permissions in the file /etc/security/audit_user not possible, it is likely to forget any new user (or there is a possibility in this file one line to describe the audits for all accounts?)
Where is the mistake?

You are most likely hitting Bug 15779000 user/role/groupadd/mod/del don't audit their use.
And the fix is only available in S11.2.
-- Renaud

Why Create action during FF Activesync even I did not set up for create

We use FF active sync to update user's lighthouse attribute by reading HR file. If a user has resource account, for example, Active Directory in IDM, but in AD side the account does NOT exist. When active sync runs, it have Create action to try to create account. Why? Here is log from active sync. How can I disable that action? I did not check create account if no match.
<ResultItem type='Xresource' status='ok'>
<ResourceResult name='AD -SIT' accountId='cn=HRFeed\, UserFour,cn=Users,dc=company,d
c=com' operation='create'>
<WavesetResult>
<ResultItem type='table' status='ok'>
<ResultTable>
<ResultTitle>
<Message id='PR_TITLE'>
<String>cn=HRFeed\, UserFour,cn=Users,dc=company,dc=com</String>
<String>AD -SIT</String>
</Message>
</ResultTitle>
<ResultColumns>
<List>
<String>UI_ATTRIBUTE</String>
<String>UI_VALUE</String>
<String>UI_ATTR_STATUS</String>
</List>
</ResultColumns>
<ResultRows>
<List>
<List>
<String>password</String>
<String>********</String>
</List>
<List>
<String>expirePassword</String>
<String>UI_TRUE</String>
</List>
</List>
</ResultRows>
</ResultTable>
</ResultItem>
Edited by: janex on Apr 22, 2008 5:43 PM

We use FF active sync to update user's lighthouse attribute by reading HR file. If a user has resource account, for example, Active Directory in IDM, but in AD side the account does NOT exist. When active sync runs, it have Create action to try to create account. Why? Here is log from active sync. How can I disable that action? I did not check create account if no match.
<ResultItem type='Xresource' status='ok'>
<ResourceResult name='AD -SIT' accountId='cn=HRFeed\, UserFour,cn=Users,dc=company,d
c=com' operation='create'>
<WavesetResult>
<ResultItem type='table' status='ok'>
<ResultTable>
<ResultTitle>
<Message id='PR_TITLE'>
<String>cn=HRFeed\, UserFour,cn=Users,dc=company,dc=com</String>
<String>AD -SIT</String>
</Message>
</ResultTitle>
<ResultColumns>
<List>
<String>UI_ATTRIBUTE</String>
<String>UI_VALUE</String>
<String>UI_ATTR_STATUS</String>
</List>
</ResultColumns>
<ResultRows>
<List>
<List>
<String>password</String>
<String>********</String>
</List>
<List>
<String>expirePassword</String>
<String>UI_TRUE</String>
</List>
</List>
</ResultRows>
</ResultTable>
</ResultItem>
Edited by: janex on Apr 22, 2008 5:43 PM

Is there a way to make it automatically set the ouputs of new tracks to Bus 5? (or something other than Stereo Out?)

When I add a new track, it is automatically set to Stereo Out, is there a way to make it automatically set to Bus 5? I use a mix that sends everything through busses and every time I add a track it seems I have to adjust this.
Thanks

...and/or setup one or more tracks the way you want.. and then create/save a template and load that when you want to start a new project...
You can even have Logic (via it's Startup preferences) autoload that template every time you start a new project... by choosing your template as the default one.
See this page in the User Guide for more info

CS3: how to create action to add fixed text of foreground color, etc.

I'm trying to create an action and/or brush preset(?) that will:
1) Add a fixed text string in the forground color, consistent font, size, etc.
2) Apply a consistent Layer Style -> Bevel and Emboss setting
3) Allow me to move the text to whatever position
4) Change text layer opacity
5) Flatten
At some point in the past when searching the internet I came upon a description of how to create a brush preset (I think that was it) that did at least most of this, but somehow I seem to have lost the preset and don't know how to recreate it.
thanks,
Mike

j_m_d wrote:
I'm trying to create an action and/or brush preset(?) that will:
1) Add a fixed text string in the forground color, consistent font, size, etc.
2) Apply a consistent Layer Style -> Bevel and Emboss setting
3) Allow me to move the text to whatever position
4) Change text layer opacity
5) Flatten
At some point in the past when searching the internet I came upon a description of how to create a brush preset (I think that was it) that did at least most of this, but somehow I seem to have lost the preset and don't know how to recreate it.
thanks,
Mike
First it is And/or you can create both or one or the other. For in actions and scripts you can not automate the use of a brush.
1) Add a fixed text string in the forground color, consistent font, size, etc.
    Easy if all images are the same size and a little more work if image size vary for you will need to scale the image.
    If you want to scale the image back to it original scale at the end of the action you need to use a little script in the action. .
2) Apply a consistent Layer Style -> Bevel and Emboss setting
    Again easy if aoo images are the same size not posible if images vary in size for many setting in layer style are in absolute pixel size.
    However layer styles will look good for a range of images sizes like Print Size or thunbnail size or small web sizes.
    Therfore I create actions for print size images and work full size. if I need smaller image I work full size and resize before output.
3) Allow me to move the text to whatever position
     This is quite easy to do in an action you simply add an interactive transform step after adding the text layer.
     However this is not a good idea if you want to batch the action. Interactive sort of defeats batch.
     With an action it is easy to posion a layer.
4) Change text layer opacity
    Simply change the added text layers opacity and or fill and it will be recorded.
5) Flatten
    Simple just record it I don't like actions that flatten though. If you give your action to some and the use it on an image the did a lot of work on the may get very upset the your acrion flatten all their work.
Have a look at my Crafting Actions Package it cantains a sample action that add a text copyright layer to any size image.
Package Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
12 Scripts for actions
Example
Download

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

Can i automatically set the timestamp of a file based on part of its filename?

I have a bunch of files (approx. 500) with the same name pattern, that is : name_CreationDate.pdf. For instance: invoice015_2013_06_25.pdf or invitation035_2012_11_30.pdf. The last 10 digits are always the creation date. The original timestamps of the files have been messed up by a batch application which set them all to the same day; therefore they mean nothing anymore.
Is there a way to automatically set the timestamp (for instance the "Creation Date" one) to the date indicated in the filename? I was thinking of Automator or some kind of shareware/freeware. Does anyone of you have an idea about this? Ideally as a batch rather than individually.
Thanks,

Thank you for your script. I made a test based on your script:
a) I copied a PDF file on my desktop and named it "URSAFF 1er trim 2012_1998_09_19.pdf". The date component I want to set ultimately is therefore 1998_09_19.
b) I created a service in Automator and pasted your script in a "Run a Shell Script" command. I added the Get Specified Finder Items at the beginning to be able to test the script on the file from Automator. (See screen shot of Automator below)
c) The script appears to run successfully but I don't see a change in the timestamps of the file after I display Get Info from the Finder. (See screen shot of Get Info after I run the shell script)
I wonder if my Region settings (I am based in France) do not interfere with the date/time string layout compatible with touch in your script. Just in case, I have added a capture of these settings.

Creating a mirrored raid set with a hard drive that already has data on it.

I have a hard drive that I keep my photos on, and want to create a mirrored raid set that includes this drive, with its data, and another drive. How can I do this without erasing the drive with my photos on them? I am running 10.7.5 if that matters.
Thanks for any help.

Creating a Mirrored RAID reformats the drive and loads a substantial RAID driver and some tables onto it. When completed, the drive is inherently a member of a RAID set, and will continue to be so even if moved to another Mac.
because of this, you cannot create a RAID directly on a standard drive that contains data already in any reasonable, risk-free way.
To amplify what The Hatter has said above, Mirrored RAID is not Backup. Mirrored RAID only increases mean time to repair to keep a drive failure from becoming a Data Disaster. You still need a Backup. Mirrored RAID does not protect you from deletions from user error, crazy software, or "just because".
I run a mirrored RAID in my Home Server, which contains all the Users files for everyone in the Household. And I also recognize (after being burned by it) that Mirrored RAID is helpful, but not a sufficient Backup by itself. I back up the Users Drive automatically to an External drive using Time Machine. [So what I am advising is not just theoretical, I am living what I am advising.]
With WD Black 1TB and other very good drives in the under US$100 range, there is really no reason NOT to invest in several drives for such an undertaking.

Automatically set date and time in PDF file

Good Day to all
I use LiveCycle to create a PDF template so my users can fill up reports with out printing, the problem is the "time/date" field changes every time the supervisor open the file, so there is no way to track the date the report was created.
I'm looking for a way (any trick) to make the automatically set but only when I save the document instead when I open it, I hope I'm explaining myself.
Or maybe I just need to use another software, if you can recomend me one, or a trial just to be sure is the one I need.
Any help would be great!!!...
Thanks!!!

You probably might have placed the code to populate the Data/ time value on the initialize event. Before you assign the current system date, check if the field has a value already. If it has then do not assign a new value.
Thanks
Srini

Can't get my 3rd Party Sales Order to create the PO automatically...

I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
Thanks.

Hi Dennis - I really appreciate the feedback but I started this thread with ....
I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
I have since confirmed that I can trigger a PO creation by running ME59N BUT the PO is not created automatically when I save the sales order despite what the help text on the item category implies.
I think I have already done every you have suggested and even a little more, or maybe I'm missing something? Do I need to do something with ALE - turn something on perhaps? Have you actiually seen this functionality working? I'd love to hear from someone who has.
Regards.
Patrick

No actions for document sets in SharePoint Designer

Hi,
I am an SharePoint Online user and I want to create a workflow that copies/moves a document set from one library to an other library/repository.
The problem is, that I don't have any actions concerning document sets in my SharePoint Designer. There should be an action "send document set to repository".
I have already activated the content organizer feature. Did I miss to activate a feature? Are actions for document sets included in SharePoint Online?
Thank you.

Do the normal move item actions not work?
The content organiser feature is slightly different. That allows you to use the Information Management policies which might be more appropriate as they let you move documents based on things like the time since last updated + 5 months.

Desactive the option "create serial number automatically"

Hello
I´am using serial numbers for certain materials with Stock check, and in my serial number profile the procedure MMSL (maintain goods receipt and issue doc.) is set the serusage 03 (obligatory).
I need this configuration, so I can control stock for which serial number, and this serial number can´t be set automatically, it was to be write down by the users.
The problem I have is that when I´am doing a material movement, for example, mvt 501 in MB1C or in MI04 to register the inventory count, the series number is obligatory has I want, but the system gives the user to "create automatically serial numbers", and when the user do that is creating new serial numbers sequential by the number range I gave. What I Want to know is:
Is there any way to disable this option of "create serial numbers automatically???
Thank you very much for your help
Best Regards
Carla

MAHA REDDY wrote:
Hi All,
I am trying to generate the serial no on the form by this coding
i have taken non data base field SI_NO
IF :system.record_status IN ( 'NEW' ,'INSERT' ) THEN
:XXEAM_JOB_TEMPLATE_LINES.SI_NO := :System.CURSOR_RECORD ;
END IF ;
If I am deleteting a record from the middle of the record the sequence on the serial number does not gets changed eg. if there r 5 records if I delete 3 record then the sequence of serial number will become 1,2,4,5 where as it should become 1,2,3,4
same is the issue if I add a record in the middle the serial number gets duplicate eg if there r 5 record and i am adding another record after 2 then its coming like this 1,2,3,3,4,5 where as it should come like this 1,2,3,4,5,6
Hi Maha,
You can use PRE-RECORD trigger at block level and if you write
:TXT_SL:=:system.trigger_record;you will get serial no. After deleting or adding it will not re-organize your serial no un till you navigate at other record. If you navigate through out the record, it will
re-organized.
If you want it dynamically, you need to do a loop after any interaction in records.
Hope understand..
Hamid

Template to create a 3D box set of books

I'm looking for a template to create a 3D boxed set of books with the cover on the right side and three spines to the left. There was a really nice tutorial on how to do it on YouTube and the woman had the templates available for 99 cents on Amazon Kindle but of course, her website doesn't work and there's no templates. ( [removed link] ) I just need a simple template to drop the spines and front cover in. Can anyone help me?

I recently came across a free action for this called 3-D Box Generator by Art Bees
3D Box generator for Photoshop | PSD Box
Simple and works great!
Nancy O.

Creating Action to automatically set guides

Similar Messages

Maybe you are looking for