Creating an auto-reply message by command line

Hi,
Is it possible to create a an auto-reply message by command line? Need to create one but I have the users password and don't want to reset his password.
TIA,
Henry

Thanks Pterobyte.
I guess I did not search far enough back to find this. I did have to google en example of script. I've posted it below for future reference.
# This is a sample script for vacation rules.
# Read the comments following the pound/hash to find out
# what the script is doing.
# Make sure the vacation extension is used.
require "vacation";
# Define the script as a vacation script
vacation
# Send the vacation response to any given sender only once
# every seven days no matter how many messages are sent
# from that sender.
:days 7
#For every message sent to these addresses
:addresses ["[email protected]"]
# Make a message with the following subject
:subject "Out of Office Reply"
# And make the body of the message the following
"I'm out of the office for an extended period of time and will not have access to email. "
# End of Script

Similar Messages

Create .txt empty file After Message Processing Command Line Linux command

Hi All,
An empty .txt file has to be created in FTP location(FTP loc c:\xyz\Customer20082910.txt) only after the .dat file has been created(FTP loc c:\xyz\Customer20082910.dat)
Note:.dat has the actual data and .txt is an empty file and is created only after .dat is created
I know that .txt empty file can be created using the After Message Processing Command Line...
But confused which command to be given such that it will be created in the FTP location(c:\xyz\Customer20082910.txt)
Can any one please give the Linux command for it...
Regards,
Sridhar

Hi Aamir,
Thanks for the suggestion, I will ask my client to create a shell script at FTP server...
And one more question,
This is reverse side , now the .dat file is to be picked only if .txt exists at the FTP server (scenario File > XI>SAP) (earlier was SAP>XI>File)..
So please can you suggest for this also...
How can i check for the .txt and pick corresponding .dat file...
i had posted question long back
Need to pick .TXT file only if .CTL file is available
Regards,
Sridhar

Auto-reply messages not working in pidgin [SOLVED]

I am not sure if this a configuration issue, but my custom auto-reply messages in pidgin are not popping up when someone messages me. I added myself to my buddy list to trouble shoot and I noticed that the message doesn't appear at all next to my status like it should. I just see 'away'. Any help is appreciated.
Last edited by vytalelementz (2008-07-03 03:28:36)

Hmm...I guess I'm stuck oh well. People that message me will have to deal with it when no auto-reply is sent back.

Auto-reply Message Could Not Be Dequeued

Hi,
I am using iMS 5.2 HF 1.25. I found that the auto-reply function of my messaging server here is not working properly. User receives email indicating the auto-reply message had been enqueued and could not be dequeued after 9 hours instead of the auto-reply message itself. This only happens on several users.
I tried to do the following:
1. imsimta stop
2. kill all the 'autoreply_master' process
3. imsimta cleandb
4. imsimta start
After this, the auto-reply function works fine. However, it is working inconsistently. In other words, sometimes users do receive the auto-reply message successfully, but sometimes they don't.
Any idea of what's wrong?
Besides, after step 4 above, my job_controller and dispatcher were started again. However, I can't see any 'autoreply_master' process running when I execute "ps -ef". Would that cause any problem to my messaging server? How should I bring the process up again?

from the 5.2p2 buglist:
4976449 autoreply can omit To: header
() [mta] {}
5003390 autoreply channel generates incorrect envelope From: address
() [mta] {}
5004448 $SUBJECT autoreply substitution works once per message
() [mta] {}
I think the second one could be the cause of what you're seeing. . .
I would download and apply the 5.2p2 patch, and see if that fixes it.

How can I change "do not disturb" 's auto reply message?

When I turn on do not disturb in my iphone 5, then when someone
call there is auto-reply that “the number you dial is busy now”. How can I
change this auto- reply message? Could I change to “the number you dial is
power off” ?

What do you want to do? If you turn on Do Not Disturb, this is the result - your phone is busy. Turn off Do Not Disturb or allow those callers you want to get through in Settings > Do Not Disturb > Allow Calls From.

My ichat is saying that my password isn't right and then after 20 tries I get in but some of my friends say that it my account tries to request video chats to them when i am not online and sends auto reply messages when i haven't set that up. Am i hacked?

my ichat is saying that my password isn't right and then after 20 tries I get in but some of my friends say that my account tries to request video chats to them when i am not online and sends auto reply messages when i haven't set that up. Am i hacked? This has also happened to alot of my friends on my buddy list
is it a bug or have I been hacked

System Preferences > Network > your-connection-medium > (Assist me) > ( Diagnostics )
This sometimes provides additional helpful information, sometimes not so much.

How do I create an auto reply for one person in my buddy list?

I want to be able to have an automatic reply to one person in my buddy list whenever they IM me so that i dont have to reply myself. I dont want to block them but i sometimes want to be able to just avoid them and so does anyone know any applescript that i can run whenever they send me a message??

Hi,
In the Buddy List highlight a Buddy.
Use the CMD and I keys together (Get Info)
This brings up their Info Card.
Select Actions (Same as Alerts in the Preferences In Fact some versions do Read "Alerts" )
Change the top item to Invite (Text)
Select the AppleScript option.
Set the Script to be Auto-Decline.
This will produce no response on the Buddies end.
For that go to the General Section of the Preferences and set the option to "Auto-Reply with my Away Message"
This will then send the Away message to the Buddy set in the first bit but to no--one else.
If you wish to be able to Reply when you have an Available Message up, that is a little more difficult.
9:19 PM Thursday; September 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error message: "invalid command line argument" while lodaing itunes

I'm trying to load Itunes onto a computer that already has a version of itunes on it. I get a message that says "error: -1639 invalid command line argument" Does anyone know what this means? Does this mean I can't load itunes onto a computer that already has itunes on it?
Also, I was able to load itunes on my laptop, but My ipod Icon is not appearing anywhere, not in itunes, not in explorer, not in my computer. I am, however, able to transfer music automatically when I plug the Ipod into the laptop. I have created several playlists and they have transferred over to the ipod as playlists. Any ideas why I can transfer despite not being recognized anywhere on the computer?
Last thing is, I have plugged the Ipod into three different computers with itunes on them, and the ipod does not show up in the source list.
I'm somewhat perplexed by all of this. Any help or insight would be greatly appreciated
Dell Windows XP Pro

hiya!
"error: -1639 invalid command line argument"
hmmm. folks typically only get that error if they are installing from removable media (such as a CD), although i have seen it happen if someone tries to install into the "recovery partition" of certain makes of PC.
if you download and save an installer to your C drive and run the install from there, do you still get the 1639?
iTunes 6.0.4.2 Installer
love, b

How to create an alias for a custom command line with paramters

Is it possible to create an icon that runs a terminal command line ?
What i want to do is start firefox with a specific profile. In terminal this is done by using Firefox -P [profileName]
How can I put this in an alias (or something else) ?
I tried creating an alias that changing the original but it won't let me insert a command line.
Any help ?

In my .profile this works: alias f="/Applications/Firefox.app/Contents/MacOS/firefox -P doug"
for starting under my profile. Make sure you run source ~/.profile if you add an alias to .profile
Starting default FFox profile is /Applications/Firefox.app/Contents/MacOS/firefox -P swxazqvy.default
And for Desktop icon to start whichever profile, open Script Editor and paste with proper changes(and save as an app(maybe to Desktop again?) :
do shell script "/Applications/Firefox.app/Contents/MacOS/firefox -P doug"
And you can make an executable with icon in a bash script with above and chmod u+x it and save to Desktop too.
Message was edited by: doug pennington

How do i create a database template from the command line?

Hi,
As part of implementing a backup and recovery strategy for a client (including disaster recovery) I want to automate the creation of a database template From an Existing Database (Structure as well as data) via a script that will run every night.
The background to this is that we will also be using RMAN to take backups of the database concerned but the client does not want to wait while an RMAN backup is restored and so wants an additional level of insurance in the form of a ‘standby’ clone database.
The idea is that nightly we will run a script that creates a database template from the Existing Database (Structure as well as data) and then transfers the 2 files involved e.g. DB_data_included.dbc and DB_data_included.DFB across to a standby server where they can be used to recreate the database in the event of us needing to after e.g. a complete server failure.
So I have a couple of questions about this that I would be very grateful if something could answer for me:
1)     Is it possible? That is, can a database template be created from some utility by supplying a series of parameter=value pairs on the command line?
2)     If yes how do I go about it, what utility do I use (the emca utility?). and what parameters do I need to supply on the command line to create the template?
3)     The intention is that the script to create the template will run in the early hours of the morning when no-one is using the database but what state does the database need to be in when the template creation script runs i.e. up, down, mounted and does the creation of a template affect the state of an already up database i.e. if I kick off the template creation script and the database is up will it switch it into mount mode or anything like that? My concern here is that I want to make sure I understand exactly what is going on so that no users or connected external systems are affected?
Thanks in anticipation of someone being able to guide me on what to do or what documentation to read.
Also if you require any clarification on what i'm asking please post up your query and i'll respond ASAP.
Kind Regards,
George Johnston
OCP 9i DBA

Sybrandb,
Firstly thanks for you reponse.
However, I don’t agree that dbca only creates empty databases otherwise why does the option to create a template from an existing database (structure as well as data) exist in the dbca wizard?
I have performed a test case where I have a created a database template including data on one 10g server. I have then used the files generated to recreate that database on a separate server. When the new database is started it is an exact copy of the original. So it’s not empty at all , it’s exactly what the client wants.
So I don’t agree that I’m gaining zero.
Why is this approach doomed to fail?
There a number of reasons why I “just set up a proper standby database”
1.     Time – I’m on a customer site in a tight engagement where the customer wants maximum value for money. I don’t have standby database skills and the customer isn’t willing to pay for me to learn on the job so please understand the tight circumstances I’m working in.
2.     Availability – As far as I know the client is running 10.2.0.3.0 standard edition. Correct me if I’m wrong but is standby db available in that edition. Where do I look to check V$OPTION.
On the RMAN duplicating a database front it’s an area I haven’t used before but I will take a look at it.
Also please revisit the context of my original posting where I state
The background to this is that we will also be using RMAN to take backups of the database concerned but the client does not want to wait while an RMAN backup is restored and so wants an additional level of insurance in the form of a ‘standby’ clone database.
So please understand that this a quick fix that the client wants developed in the minimum time possible in ADDITION to a full nightly RMAN backup being taken.
In an ideal world I’d have the time to follow best practice but in the real world of on-site customer support I just need to get the job done operating under the customer imposed constraints.
Many Thanks,
George Johnston
OCP 9i DBA

Error message in Command line (cannot mount database in EXCLUSIVE mode)

Hello Experts
I'm new in Oracle and trying to connect to my database though SQL command line. After I login as SYS I user I get the message that 'connected to idle instance'. Then I use “STARTUP” to connect to database. Now from my understanding it should mount the database and open it as well. But it does'nt happens.Instead I get the message 'cannot mount database in EXCLUSIVE mode' . I'm not sure why it can't mound the database and what should I do to make it working. Please can somebody show me how to make it working again. Here are the details about my problem
Enter user-name: SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 595591168 bytes
Fixed Size 1220748 bytes
Variable Size 301993844 bytes
Database Buffers 285212672 bytes
Redo Buffers 7163904 bytes
ORA-01102: cannot mount database in EXCLUSIVE mode
Thanks a lot in advance.

Thank you so much for both of you. I've checked everything. All looks fine to me and then i tried to connect though SQL and it worked. Now what I've notice that this time I didn't start Enterprise Manager only I started the listner and then start sql it worked. Does this means that I can't use both SQL and EM at a time together?

Create an Application Object schedule from command line?

Hi everyone - long-time lurker, first-time poster here.
Is there a way create an availability schedule for an Application Object via a command line (or any other programmatic method)? The utilities I've obtained from Cool Solutions are great for replicating AOs (Application Objects) and setting certain properties, but none of them seem to have a method of creating a schedule that you would otherwise create within the AO's property book via Availability > Schedule. BTW, we are using Zen 6.5.
We have a rollout around the corner for which there are several AOs that drive the process, and we are going to have an instance of each of these AOs for every target group (of which there are dozens), and each group will have their own distinct schedule. The schedules are basically going to be "wait until day X to become available and then remain available for the next 2 months".
For some of the AOs we can use the Schedule Type of Range of days, which is not so terrible to set manually because you just specify a start date and an end date. But most of the AOs must have the Schedule Type of Specified days in order to ensure they do not ever launch during business hours; manually selecting 60 days from the date picker for a single instance is a daunting task, and I shudder at the thought of having to do so for dozens of AO instances.
I believe that the field in the ZENworks database that corresponds with an Application Object's schedule has a data type of Binary (which may be why there doesn't seem to be an existing solution), but does anyone have any ideas for accomplishing what I'm talking about?
Thanks in advance,
Gavin

Originally Posted by AndersG
Jeemo,
> basically going to be "wait until day X to become available and then
> remain available for the next 2 months".
>
Just to clarify, you want:
Range of days, start date, end date. Nothing fancier than that?
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
In a perfect world this is what I would like to be able to do:
For the AOs where we're going to use the "Range of Days" schedule type, be able to specify the start date, end date and also the days of the week when we do not want it to run (or just the days we do want it, if easier).
For the AOs with the "Specified days" schedule type, we would like to add (or remove) a specific date, and optionally be able to specify that Start Time and End Time that applies to the dates. As for adding multiple dates, I was planning on having a script that enumerates all the dates in our desired range, and for each date in the range it would call the utility with that date passed as a parameter to add it or remove it.
If all of the above is too much to put together then I would not complain if it is only partially fulfilled. To be honest I would not mind building a mechanism myself that could handle this, it's just that I don't know where to start. I'd be happy to take a crack at it if someone could point me in the right direction for how to send commands to the database (or directory).
Thank you again for your help.

Configure auto reply message with original email in exchange 2010

Dear All,
I have to configure Auto reply with original message in exchange 2010.
please help me to configure..
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi SKPATEL
Thank you for your question.
By my knowledge, we cannot meet your requirement, you can followed Ed's idea.
We just use out of office to reply all email without original email when the recipient is out of office.
You can refer to the following link to configure out of office:
http://technet.microsoft.com/en-us/library/aa997463(v=exchg.80).aspx
If there are any questions, please let me know.
Best Regard,
Jim

Can I create a new folder using the command line interface

Hi.
Is there a way to create a new folder in an existing business area, from the command-line?
We have an application that provides an interface for the user to create a table and load flat file data into the table. After loading the data, the user will verify the loaded data using discoverer. If there is a command line interface to create a new folder, then the script that created the table can also call the discoverer command line to create a new folder for the new table. Is this possible?
Thanks

Hi,
I think I am having a similar question here. I am using Oracle 10g on Windows xp.
I logged in to Oracle from command prompt. I used command create directory myFunDir as 'd:/funDir';. Oracle returns: Directory created. But I couldnt find the directory myFunDir! Where is it?
Thanks.
Newbie.

Mail; Using applescript to create an auto-reply with attachments

I know nothing about applescript and so have no clue how to do this. I tried googling a script but couldn't find one. I also saw similar posts on this topic, but couldn't find scripts.
I am looking for a simple applescript to go into the Mail app rules to reply with an email message with an image attachment. does anyone know where I can find that script? again, I know nothing about applescript, so I cant do it myself, so details would be nice.
thanks!

ok no one replied. now i am wondering, how can i get automator to maybe add an attachment to a current outgoing message. i saw an option for that in automator, but it only works if you have automator create a new email message which i dont want. im using mailtemplate to reply to email messages and quickeysx too, so what i need is to add an automator script to just add an attachement (or 2) to the current outgoing email message. or maybe there is an apple script to add attachment to the mail message on screen? any help would be great thanks

Creating an auto-reply message by command line

Similar Messages

Maybe you are looking for