Creating box for margins

I purchased Dreamweaver CS3 The Missing Manual and I'm
learning the basics of this program. When I went through the steps
in the book the first time I very easily created a margin around my
page so that there is a white area where my page is and my
background image in the margins. This worked fine on the tutorial
program, but whenever I try to make it on my site I am just able to
come up with a small box in the middle of my page, which is of no
use to me, obviously. I went through the book again and did all of
the steps and the same thing is happening. Does anyone know if
there is an option that I have overlooked or something that I have
checked that I need to uncheck? Thanks.

pstanfo0 wrote:
> I purchased Dreamweaver CS3 The Missing Manual and I'm
learning the basics of
> this program. When I went through the steps in the book
the first time I very
> easily created a margin around my page so that there is
a white area where my
> page is and my background image in the margins. This
worked fine on the
> tutorial program, but whenever I try to make it on my
site I am just able to
> come up with a small box in the middle of my page, which
is of no use to me,
> obviously. I went through the book again and did all of
the steps and the same
> thing is happening. Does anyone know if there is an
option that I have
> overlooked or something that I have checked that I need
to uncheck? Thanks.
>
I am not an expert, but do you have a valid doctype?
ie: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
Harvey

Similar Messages

  • I am creating box for two coloums in sap script

    hi,
    i am creating box for two coloums
    when i am creating box for this two coloums this box is displaying from the top.
    when i am decreasing this hight it is decreasing from the buttom of the window
    i want to decrease from the top of window
    can u explan plz
    this requirement
    plzz

    see this:
    BOX Command
    Syntax
    /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
    Effect: draws a box of the specified size at the specified position.
    Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
    XPOS, YPOS
    Upper left corner of the box, relative to the values of the POSITION command.
    Default: Values specified in the POSITION command.
    The following calculation is performed internally to determine the absolute output position of a box on the page:
    X(abs) = XORIGIN + XPOS
    Y(abs) = YORIGIN + YPOS
    WIDTH
    Width of the box. Default: WIDTH value of the SIZE command.
    HEIGHT
    Height of the box. Default: HEIGHT value of the SIZE command.
    FRAME
    Thickness of frame.
    Default: 0 (no frame).
    INTENSITY
    Grayscale of box contents as %.
    Default: 100 (full black)
    Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
    Units of measurement: The following units of measurement may be used:
    TW (twip)
    PT (point)
    IN (inch)
    MM (millimeter)
    CM (centimeter)
    LN (line)
    CH (character).
    The following conversion factors apply:
    1 TW = 1/20 PT
    1 PT = 1/72 IN
    1 IN = 2.54 CM
    1 CM = 10 MM
    1 CH = height of a character relative to the CPI specification in the form header
    1 LN = height of a line relative to the LPI specification in the form header
    /: BOX FRAME 10 TW
    Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
    /: BOX INTENSITY 10
    Fills the window background with shading having a gray scale of 10 %.
    /: BOX HEIGHT 0 TW FRAME 10 TW
    Draws a horizontal line across the complete top edge of the window.
    /: BOX WIDTH 0 TW FRAME 10 TW
    Draws a vertical line along the complete height of the left hand edge of the window.
    /: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
    /: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
    POSITION Command
    Syntax
    /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
    Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
    Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
    XORIGIN, YORIGIN
    Origin of the coordinate system.
    WINDOW
    Sets the values for the left and upper edges to match those of the current window (default setting).
    PAGE
    Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
    /: POSITION WINDOW
    Sets the origin for the coordinate system to the upper left corner of the window.
    /: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
    Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
    /: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
    Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
    Pre-Setting BOX Position Arguments
    You can use the POSITION and SIZE commands to preset some arguments in the BOX command. POSITION presets the start point (upper left corner) of a box or line. SIZE specifies the width and height of a box.
    You can use POSITION and SIZE to preset arguments, but you can also set the start point and size arguments of a box or line directly in the BOX command.
    By default, if no positioning is specified, the upper left corner of a box or halftone or the top of a line is aligned with current SAPscript window. That is, the upper left corner of the box, halftone, or line starts at the upper left corner of the current window in the active form. By default, the height and width of a box are set to the height and width of the current window.
    Use POSITION and SIZE to preset the arguments in a BOX command in the following situations:
    The BOX command exceeds the 132-character (1 line in SAPscript) length limitation if you specify all arguments directly in the command. You may exceed this length limit if, for example, you use symbols in a command.
    By pre-setting arguments with POSITION and SIZE, you can work around the limitation on the length of a command. You do not need to specify the preset arguments in the BOX command.
    You want to use the enhanced capabilities of POSITION for adjusting the starting point of a box or line.
    With BOX, you can specify an offset for the starting point only as a whole number (non-negative integer). This command would print a box starting 1 CM to the right and 1 CM down from the left upper corner of a window:
    /: BOX XPOS '1' CM YPOS '1' CM
    With POSITION; you can adjust the position of a line or box relative to a window much more precisely. In the POSITION command, you can specify positive and negative offsets and use non-integer numbers.
    Example: The commands shown below position a box slightly to the left and slightly above a window. This leaves a margin between the edge of the box and the text in the window.
    /: POSITION XORIGIN '-.2' CM YORIGIN '-.2' CM
    /: SIZE WIDTH '.2' CM HEIGHT '.2' CM
    /: BOX FRAME 10 TW
    (Note that the box must be enlarged to accommodate the shift. If it is not enlarged, then it will not cover all of the window.)
    You can also use POSITION to set the starting point to the upper left corner of the active page format. Example: POSITION PAGE moves the starting point from the active window to the active page format.
    You want to use the relative sizing capabilities of SIZE to adjust the size of a box, line, or halftone.
    With BOX, you can make only absolute size specifications. BOX HEIGHT, for example, overrides the default height setting to the height of the current window.
    With SIZE, you can adjust the size of a box or a line with respect to its previously-set dimensions. The following commands would, for example, draw a frame 1 CM in from the margins of the paper:
    /: POSITION PAGE
    /: POSITION XORIGIN 1 CM YORIGIN 1 CM
    /: SIZE PAGE
    /: SIZE HEIGHT '-2' CM WIDTH '-2' CM
    REWARD IF HELPFUL

  • Trying to create box for text but....

    Hi all.
    So I am new to the software.  What I am trying to do is create a box for text.  I want it to be "above" the background so that the background color does not color in the back of the text box.
    An example can be found http://www.tree.com/
    At the "about tree.com" that is (a more coloful, rounded version) of what I am looking for. It is a very common thing to see in sites, I just can't figure it out.
    Thanks,
    Patrick

    Patrick
    Your question is so basic it really requires a fairly lengthy answer, the best advice is for you to find a beginner totorial on html/css. The software is really just a tool, but you really need to understand the underlying code..
    Text, as well as all content sits in elements, which reside in the body of the html code. Each element has its own properties, such as a background color or image. (not to mention the content has its own stylings)  These are set in the CSS (Cascading Style Sheets). So to give you an anwer to your question is not that simple.
    So best adviced is to google beginner HTML/CSS and see what pops up.
    HTH
    Gary

  • Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

    Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

    Basically you would need Acrobat. However, it is now also possible to create basic form fields using just the free Reader. In fact, I've been working on a tool that allows you to do it, so if you're interested in it please contact me privately.

  • How to create a ABAP report off of SRM box for live data?

    How to create a ABAP report off of SRM box for live data?
    Thanks in advance.
    York.

    you can try infoset query:
    STEP - A:
    1. Go to T Code RSQ02 and give the InfoSet name & select CREATE.
    2. Provide the Name(Description) and Data Source i.e. for eg here i take "DIRECT READ OF TABLE" = /BIC/AODS100. Then CONTINUE.
    3. Select what to Include in the 3 options available with the POPUP, here "INCLUDE ALL TABLE FIELDS". Then Check the fields and click GENERATE(one RED and WHITE round icon).
    4. Now provide the PACKAGE for the INFOSET. Come Back(F3).
    STEP - B: optional(If u want to create a new user group)
    1. Select ENVIRONMENT -> USER GROUPS. Provide the User Group name and CREATE.
    2. Provide Description and SAVE.
    3. Provide PACKAGE and SAVE. Come Back (F3) to the Initial Screen.
    4. Click Role/User Group Assignment. Select Newly Created User Group or an existing one. Then SAVE (CTRL + S). F3.
    STEP - C:
    1. Select ENVIRONMENT -> Queries. Provide the query name and CREATE.
    2. Select the INFOSET u have created and assigned the user group.
    3. Provide the Title and Select BASIC LIST. There you have to select (check) the fields you want to display, SAVE and then TEST. It will ask for Variant, just CONTINUE.

  • Manually Adjusting Box Margins Shifts Entire Box for Windows 8

    When adjusting box/text margins on Windows 8, elements appear to jump in many directions.
    The attached screenshot of the behavior shows where I tried to adjust the top margin using
    my cursor and instead of narrowing the gap of the top margin, the entire box shuffled down.
    This occurs in random intervals.

    Thanks for reporting the issue, grayGhostVisuals and brex2040!  Would you be to post your .rflw files that have these layout issues, so that our team could download and take a look at them?  This would really help with debugging and addressing the problems you're running into.
    If you have a Drop Box or other file posting method, that would be helpful.
    Alternatively, this thread describes other approaches for posting files:
    http://forums.adobe.com/thread/918624

  • Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings...never did really. Also JAVA now refuses to create updates for WinXP/FireFox.

    I use PaleMoon now trying to get rid of advertising sharks. I have WINXP still - need assistive-technology computer for pain so taking time on getting new computer.
    I have been severely sabotaged by advertising conglomerates selling my private information. They have no right -yet they do whatever they want. Anyhow...I've tried to OPT-OUT of EVERYTHING POSSIBLE. I've tried 5 places found. Google, NAI, DAA, & FIREFOX HELP said go to about:config was instructed to turn "from false to true" the "privacy.tracking.protection.enabled" .But I couldn't keep this setting because this also has to be set to false to use any saved log-on's to my accounts., and add-on AD BLOCK PLUS 2.6.7 when I was on Firefox & had some ticks and now it is disabled because it won't work with PaleMoon 25.2.1
    This case is about GOOGLE OPT-OUT. Starting here: http://www.google.com/settings/ads?hl=en&sig=ACi0TCgWymel0CNWxdcnEWPzWNs9wDd7cVQHxHsmtz4w30CAyHk7MqyzzZdGh3m6FpDaJsKmunTLEvJZY5LAm3h6gIdzE30L-Q
    There are 2 columns. The left one "ADS ON GOOGLE" NEVER RETAINS AFTER LOG-OFF. The right column "Google ads across the web
    " seems to retain sometimes - if I remember right it falls off after a period of time as opposed to after just LOGGING-OFF. Below the columns there are options, but I don't have a GOOGLE ACCOUNT.
    Also down there is this link: https://support.google.com/adsense/troubleshooter/1631343?hl=en ...you see the box with this: Advertising industry program participation
    Google is a participating member of groups that have developed industry privacy standards like the Ad-Choices icon for online advertising.
    Group Location
    Network Advertising Initiative United States
    Digital Advertising Alliance (DAA) United States
    European Digital Advertising Alliance Europe
    Digital Advertising Alliance of Canada Canada
    ....I clicked OPTED OUT FOR NAI on their link http://www.networkadvertising.org/
    ...I clicked OPTED OUT FOR DAA on their link http://www.aboutads.info/
    ...I clicked PROTECT MY CHOICES and downloaded the app.
    These 1st 2 links used to have the same trouble and didn't retain ANYTHING and wouldn't re OPT-OUT ANY UNTIL THEY WERE SATIATED - saying I didn't have 3rd party cookies allowed when I did - this took hours.
    I sent numerous trouble reports to them that they ignored - then I think I sent one to Firefox and it is much better but still not completely right. Today DAA retains 106 out of 122 and if I repeatedly RE-OPT-OUT successively I can get it to 121 out of 122 - never completely. (currently the one not taking is Accuen Inc. but it changes periodically - makes me think they set one up to take my info and then share it with all of them - lol )
    Same for NAI currently I started with 94 out of 96 - next re-OPTED-OUT got it to 95 out of 96 and no further and same co. Accuen Inc (accuenmedia.com ) wouldn't update.
    NOTE: I was copy/pasting the list of NON-OPT-OUT'S to them and my own document file to try and find trends/problems...now NAI programmers protected the list from being able to be COPIED AND PASTED!!! That's the opposite of being open and interested in making this work, right? Why would they want to allow us to OPT-OUT of their criminal espionage behavior...RIGHT? (lol) FYI: I recorded that the big one that was always retained before this one was...MEDIA MATH INC.
    MANY Opt-outs would drop off while on-line and ALL would drop-off once logged-off. Now it's retaining most once logged off - but it hasn't been long enough to tell if they'll fall back into their bad habits as they've done before...
    This has been going on forever for me - I've been reporting this malfunction since 2013.
    Of course I downloaded PROTECT MY CHOICES FOR FIREFOX via NAI AND DAA'S links ...http://www.aboutads.info/PMC#protect-your-choices-for-firefox ............they both go to the same place???.....PROTECT MY CHOICES http://www.aboutads.info/plugin/install/firefox....that seems odd...it's as if they are the same entity then. ABOUTADS is DAA'S WEBSITE. NAI'S IS NETWORKADVERTISING.ORG so why would NAI use DAA'S PROTECT MY CHOICES app?
    Lastely, I also requested that the COOKIES NAMES BE UNIFORMLY IDENTIFIABLE. All the OPT-OUT COOKIES that are to be forevermore retained on my computer and that I am to trust the EVERY FUNCTION OF - well they all have different COOKIE NAMES!! Most of the names you can not tell that they are OPT-OUT COOKIES!! - SO NOWWW They have created another problem.
    We can no longer just "DELETE ALL COOKIES".
    PLUS, we can no longer go through our cookies and delete individual ones that snuck through.
    Every one of the OPT-OUT COOKIES SHOULD SAY "OPT-OUT" IWITHIN THEIR NAME OF THEIR COOKIE - PERIOD. RIGHT? (LOL) For real. Why was this mess was allowed?
    REALLY IN MY OPINION THESE COMPANIES SHOULD BE BLOCKED AT THE LOCAL PHONE COMPANIES LEVEL - IN OUR SERVERS. We should not have to deal with them. Same thing with viruses, malware and such beasts. But I digress.
    In summary:
    1.)Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings
    2.) JAVA refuses to create updates for WinXP/FireFox/PaleMoon.
    3.) DAA & NAI still don't retain ALL OPT-OUT settings and never completely OPT-OUT all companies.
    4.) OPT-OUT cookies should be uniformly names with the words OPT-OUT in their titles.
    5.) Ad Block Plus 25.6.7 doesn't work for Pale Moon and there is no alternative - (didn't work great in FireFox)
    Right now I'm mainly interested in #1)retaining my GOOGLE OPT-OUTS while on line AND while logged off since it is attacking my computer and steeling all the speed until it freezes my keyboard.
    Currently I am trying to remember to run through 3. OPT-OUTS every time I log on.
    Thanks so much!

    hello, palemoon's support forums are here: http://forum.palemoon.org/

  • Need To Create Box That Shows Previous Month Label And Amount Of Sales

    I am using CR2008
    I am creating a report for our salesmen and one of the fields in the report will be a text box that shows what the last month was. For instance, if the report is run this month, the report will plug July 2011 into the box because that was what last month was. Tied to this will be a salesman's total sales for last month that should show up in a box. I will place this box right next to the salesman's name on the report as the names will be static.
    I have several of these to do and if I can see the method I can re-create it for the others.
    How would I do this?

    Hi
    You can create a formula to get last month and this formula can be placed in a text box.
    dateadd('m',-1,currentdate)
    or
    Month(currentdate)-1&" ,"&Year(currentdate)
    This formula can be placed for all your salesmans
    Thanks,
    Sastry

  • Print Dialog Box for Addon is not showing in Terminal Server

    Dear All,
    I have created a addon for Automatic Sales Invoice printing that prints the crystal report directly to the printer bu opening a
    print dialog box for printer selection through SDK code.
    The Same addon works fine on the server with print dialog box being showing through SDK code.
    But while running on Terminal Server , print dialog box is not showing any printer though printers are redirected to that
    terminal server.I am not getting whether the problem is in my addon or in the terminal server printer settings.
    Please suggest as i need to know the reason urgently.
    Thanks
    Amit

    Hello Edward,
    Thanks for your reply .
    But the problem is that while running on normal server the print dialog box appear with the printer name in my addon for printer selection .
    But while using terminal server , the print dialog box is not getting any printer in the dialog box .That's the major concern for me
    is their any way to check that why the printers are not showing in print dialog box.
    Thanks ,
    Amit

  • How to create variant for table/view ?

    Hi,
    When I go through SM30, I find a radio button called variant. I don't know the effect.
    Can anyone tell me how to create variant for table / view ?
    I want to know when we need to create variant for table/view.
    Best regards,
    Chris Gu

    hi ,
    Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
    For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
    If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
    Procedure
    To create a new variant:
           1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
           2.      On the variant maintenance initial screen, enter the name of the variant to be created.
    Note the naming convention for variants (see below).
           3.      Choose Create.
    If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
           4.      If there is more than one selection screen, select the screens for which you want to create the variant
    5.      Choose Continue.
    The (first) selection screen for the report appears.
    If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
           6.      Enter the desired selection values, including multiple selection and dynamic selection.
           7.      Choose Continue.

  • How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

    How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
    When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it.  I just need to move it out of the way to modify other portions of the document.
    thanks,
    C

    Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
    Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

  • InDesign "Save As" dialog box for every operation in INDB book file; updating page numbers, etc.

    So I haven't used INDB files in awhile in InDesign, and today was the first time I attempted to adjust an old INDB (created originally with CS5).  For every operation of adjusting the book file, such as updating page/section number or adding/removing an INDD file I get a Save As dialog box for each constiuent INDD file.  This is quite annoying since the book has lots of INDDs, and I have to click through the tedious save as with each.  I previously worked with INDBs in CS5, and never encountered this, there was no need to save each INDD in the book just to update the page numbers.  I tried creating a new INDB in CS5.5 thinking that maybe it was because I was working from a file created with an older version of InDesign.  Does anyone know if there is a way to suppress the Save As dialog?  Another thing I noticed that is supremely frustrating is that this new build of InDesign doesn't default to saving the file in its original location, and I have unwittingly ended up saving files in other places, only to later realize it.  I am using InDesign CS5.5 Ver. 7.5.2 on Mac OSX 10.7.3  Any help is greatly appreciated. 

    It will only happen once (and frankly, what you are doing is a very bad idea).
    When you open the old book in CS5, you are converting to the new format. All of the legacy files also need to be converted, even if added to a new book in CS5.5, hence the Save As since ID will not overwrite the old versions until you tell it to (and that's the bad idea). I strongly recommend (though it's too late for any books you've already updated and overwritten) that you either continue to edit in the old version, or that you take the time to open each file in the original version if it's older than CS5, then export to interchange format (.inx or .idml, depending on version), open those files in CS5.5, save with new names so you don't overwrite anything, then add to a new book and proceed.
    One of the reasons I recommend this seemingly time-consuming approach is that there are too many reports (another one yesterday) of some sort of problem that pops up late in the editing cycle when converting legacy files to CS5/5.5 by opening them directly and saving. This is a belt and suspenders insurance approach, and is far less labor intensive than starting over, which might end up being your other option down the road if something goes wrong.

  • How to handle the button "cancel" in a dialog box for displaying views?

    Hello!
    I ve a question about handling the cancel button in a dialog box for displaying views.
    I ve already implemented the dialog box by using the following code:
    METHOD eh_onnewqact.
      DATA stitle TYPE string.
      IF m_popup IS BOUND.
        stitle = cl_bsp_runtime=>get_otr_text( alias = 'ZCC_ICRM/NEW_TASK' )."cl_wd_utilities=>get_otr_text_by_alias( 'ZCC_ICRM/NEW_TASK' ).
        m_popup = comp_controller->window_manager->create_popup(
          iv_interface_view_name = 'ZCC_POPUP_NEWBT/NewQActWindow'
          iv_usage_name = 'CUNewQAct'
          iv_title = stitle
        CALL METHOD m_popup->set_on_close_event
          EXPORTING
            iv_view       = me
            iv_event_name = 'NEWQACT_POPUP_CLOSED'.
      ENDIF.
      m_popup->open( ).
    ENDMETHOD.
    My dialog box consists two buttons - cancel and create.
    The cancel buttons should close the popup and the create button should create an entity of a specified object. but let us come to the cancel button. I did´nt find any information about implementing an cancel button. So, how should I implement it? I thougt
    me->close( ). But that didnt works!
    Could u give me further information about that, because my cancel event-handler is empty?
    method EH_ONCANCEL_QACT.
    endmethod.
    After that I would know how my calling view could know that the user pushes the Create Button and how the data of 2 inputfields of the dialog box finds their way to the calling view in order to process this data there?
    Thank you very much!

    Hi Michael,
    thank you for your advice! This problem is solved...
    ...but I have another issue. Ive implemented 2 editable fields in my popup. The user should fill that fields with context and that context should be processed in the calling view of my popup.
    My question is how to transfer these information from my popup to my calling view or method?
    I tried the following...
          lv_context_node ?= m_popup->get_context_node( 'QUICKACT' ).
          IF lv_context_node IS NOT INITIAL.
            lv_text = lv_context_node->get_date( attribute_path = '' ).
          ENDIF.
    But it doesnt work! The context node object is always empty/initial.
    Thank you!
    PS: Another possibility could be that the object / node of the calling view is transferred to the pop-up in order to process it there.
    Edited by: Marcus Findeisen on Feb 22, 2011 12:13 PM

  • Is it possible to create box plots in illustrator? If yes, then how?

    Is it possible to create box plots in illustrator? If yes, then how?

    You draw them manually. There is no built-in functionality. AI simply sucks for any kind of diagrams.
    Mylenium

  • Problem in creating template for the accounting transactions

    Hi,
    suppose for making an entry through fb50 we have to enter g/l a/c no. in that particular field but if some one does not want his end user to make an entry to this field other than putting an entry through his end user he wants system to take the required g/l a/c by default is it possible by creating template for that particular postings? if yes how to generate the template? i have tried to make a template through the recurring entries but not succeeded in that , so please help me.
    Thanking You
    santosh rothe
    9421542585

    You can create a template with a particular account code string from within FB50.
    Make sure you have the tree turned on (Tree On/ Tree Off button toggles display).
    Once you have entered the standard coding, right click on the Account Assignment Template folder to get a popup menu. Select "Save Account Assignment Template". A dialog box will ask you to name the template.
    You can then instruct users to use this template to record this type of transaction.
    However, this does not prevent the user from doing direct entry or changing account code strings. If you have a situation where for a particular combination of accounting elements, whether header or detail, for which the GL should always be a particular value, you can create a substitution rule in IMG which will automatically populate the GL field with the specific GL account value. The IMG transaction is OBBH.

Maybe you are looking for

  • How can I sync my iPod classic to another iTunes library

    I need to sync my iPod classic to a new computer shared with my wife how can I sync my music to her library?

  • Some websites not opening

    I have an HP computer running Windows 8, i noticed My Mozilla browser can not open twitter.com, box.com this are the two i have noticed for now, when i enter them i get //"Firefox can't find the server at twitter.com" i have cleared my cache and hist

  • 2013 27'iMac wont stay in TDM

    I have two 2013 27' iMacs linked via TB cable. I am attempting to use one to the iMacs as a secondary display. However, the taget iMac  goes to sleep after only a few minutes and drops out of TDM. initially I thought it may be a simple energy saving

  • Jar files required for Java Proxies

    Hi, Can someone mail me the following jar files required for Java Proxies or tell me where exactly I can find them….? aii_proxy_xirt.jar aii_msg_runtime.jar aii_utilxi_misc.jar guidgenerator.jar Regards, Abhy

  • Remove Html textarea scrollbar from jeditorpane

    Hi, I am using jeditorpane for display a content in my project, i am create html code and set to jeditorpane, but in my code i am using textarea for display large text, what my problem is in the textarea is not at all wrap and even small text also it