Creating BW Function module to extract R3 Function module data.

Could you tell me how to create a BW Function Module to Extract data from R/3 Function module?.
Also, the BW function module needs to pass a date/time filter to R/3 function module basis which the R/3 function module passes the date/time restricted data to BW function module.
Thanks,
Gautam

You will have to create a function module in R/3 and then call the same in BW using the RFC call function option.
Please do not raise separate threads for each question - you have asked the same question in another post of yours..
bw extraction using function module
http://tinyurl.com/lwhtk8
this will give you an idea on how you can achieve this.

Similar Messages

How to create delta extraction through function module?

Hi all,
So far i have created the data source through full load. But currently i would like to convert the couple of function module generic extraction converted through delta.
Can anyone let me know how to convert from full load to delta using generic extraction
thanks

Hi,
Try these Links, helps u in getting an idea.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aefb04-7043-2c10-8e92-941536eebc79?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f1a423-02ae-2e10-bd85-bde64e61fe7b?QuickLink=index&overridelayout=true&51947629650864
Regards,
Aravind.

Urgent: Problems in Generic Extraction by Function Module

Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS     NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
         s_counter_datapakid like sy-tabix,
Cursor
         s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
          GUID type CRMD_ORDERADM_H-guid,
        end of xsreph.
   data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
         l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    case i_dsource.
      when 'yCRM_TEXT'. " for S_SREPH1
      when others.
        if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                i_dsource   "message variable 1
                  ' '.                 "message variable 2
        raise error_passed_to_mess_handler.
    endcase.
   append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
   append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
        APPEND L_R_GUID.
      ENDLOOP.
      case i_dsource.
        when 'YCRM_TEXT'. " for S_SREPH1
          t_tab = 'CRMD_ORDERADM_H'.
      endcase.
      select GUID
      from (t_tab)
      into table i_guid where   PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
     select tdname from stxh into i_text where tdobject = 'TEXT'.
     if sy-subrc ne 0.
       message e009(r3).
this is a typical log call. Please write every error message like this
       log_write 'E'                  "message type
                 'R3'                 "message class
                 '009'                "message number
                 i_dsource   "message variable 1
                 'No master data found'.           "message variable 2
       raise error_passed_to_mess_handler.
     endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     open cursor with hold s_cursor for
     select (s_s_if-t_fields) from CRMD_ORDERADM_H
                              where GUID in L_R_GUID .
                               ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
   fetch next cursor s_cursor
              appending corresponding fields
              of table e_t_data
              package size s_s_if-maxsize.
    IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
   EXPORTING
   CLIENT                        = SY-MANDT
     ID                            = 'A002'
     LANGUAGE                      = lan
     NAME                          = l_guid
     OBJECT                        = 'CRM_ORDERH'
   ARCHIVE_HANDLE                = 0
   LOCAL_CAT                     = ' '
IMPORTING
   HEADER                        =
   TABLES
     LINES                         = i_crmtext.
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
Kishore

Hi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene

Jobs to run the function modules to extract the generic extarctors

Gurus,
I have a Datasource 'ZCMS_PP_TRAN' with extract structure 'ZBW_ST_CMSD_PP'. The extract structure is populated using the function module Z_BW_GET_CMSD_PP.
But how do I schedule this FM or in general, are they run using std programs?
Thanks,
Simmi

Hi Simmi,
what ever it may be the DS(i mean Business Content DS, Generic DS).... these will extract the Data using Dynamic Function Calls(not always). Comming to Generic DS using FM, this will be called using Dynamic Function Module.
In RSA3 or while extracting data from BW, you will pass request number, Update Mode, debugging option, selection fields, BW source System ID, DS Name.
Based on these details system will extract the underlying extract structure and function module(or table/view/infoset).
No job(Job created from BW while extracting data in the source system BI_requestid) created for Generic DS while extracting data in SAP.
For Queue Delta, Background job will be created, it will move the data to Delta Queue.
i will update the thread with related function modules. Try to debugg in RSA3, you could find all the information.
all the best.
Nagesh.

Code For Delta Extraction Using Function Module

Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.

Dear KJ,
Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
Thanks & Regards,
SGK

Generic Extraction - Using Function Modules

Hi Friends,
Can you pl let me know the step by step process for creating generic extraction using function module?
Thanks in Advance.
Regards,
Ari.
Please search the forum before posting a thread
Edited by: Pravender on Aug 5, 2010 7:31 PM

Hi,
Plz find this doc.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33.
And go this link...
http://www.sdn.sap.com/irj/scn/advancedsearch?query=genericextractionwithfunctionmadule
Regards.....KP
Edited by: kundan.sap on Aug 5, 2010 4:35 PM

Generic extraction using function module and view

hi every one ,
iam new to bw and can anyone plz tell me how to extract the data from R/3 to bw using generic extractor by creating function module and a view
thank u,
kishore

Hi Kishore,
Check this blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Also Check this doc:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Generic Extractors
Generic data sources
Generic DS
Bye
Dinesh

Generic Delta extraction by Function module issue

Hello Experts,
Please help !!!
I have problem for delta extraction by Function module. For the full load, I wrote function module based on RSAX_BIW_GET_DATA_SIMPLE. It works fine.
But I would like to have the delta load enabled. Therefore, I modified the datasource, add a delta specific field u2018ztimestampu2019, which type is calendar day.
Then I create a function module based on template u2018RSAX_BIW_GET_DATAu2019, as this support the upload mode. But when I test this datasource in RSA3, no matter itu2019s full load or initial delta load, it always send me an error, u201CErrors occurred during the extractionu201D.
I had some debug, and found that there is no value for i_isource when my function module is called. Therefore it raised the exception.
But I do not have the chance to debug my code for the delta logic, can somebody help to check?
I also check the entries in ROOSOURCE,
For my datasource ZTRNREC_FM_DELTA, The DELTA value is u2018AIEu2019, and extraction method is u2018F2u2019, should I change them to DELTA= u2018Du2019 and extraction method to u2018F1u2019? Where to change?
FUNCTION ZRSAX_TRAININGREC_DELTA.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*"     VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*"     VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*"     VALUE(I_PRIVATE_MODE) OPTIONAL
*"     VALUE(I_CALLMODE) LIKE ROARCHD200-CALLMODE OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZTRN_REC_TIME OPTIONAL
*"      E_T_SOURCE_STRUCTURE_NAME OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
The input parameter I_DATAPAKID is not supported yet !
Example: InfoSource containing TADIR objects
Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize,
          S_S_IF TYPE SRSC_S_IF_SIMPLE,
          S_COUNTER_DATAPAKID LIKE SY-TABIX.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
    IF NOT g_flag_interface_initialized IS INITIAL.
      IF 1 = 2. MESSAGE e008(r3). ENDIF.
      log_write 'E'                    "message type
                'R3'                   "message class
                '008'                  "message number
                ' '                    "message variable 1
                ' '.                   "message variable 2
      RAISE error_passed_to_mess_handler.
    ENDIF.
Check InfoSource validity
    CASE i_isource.
      WHEN 'ZTRNREC_FM_DELTA'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e009(r3). ENDIF.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_isource            "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
Check for supported update mode
    CASE i_updmode.
      WHEN 'F'.
      WHEN 'D'.
      WHEN 'R'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e011(r3). ENDIF.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '011'                "message number
                  i_updmode            "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
Check for obligatory selection criteria
    APPEND LINES OF i_t_select TO g_t_select.
Fill parameter buffer for data extraction calls
    g_s_interface-requnr    = i_requnr.
    g_s_interface-isource   = i_isource.
    g_s_interface-maxsize   = i_maxsize.
    g_s_interface-initflag = i_initflag.
    g_s_interface-updmode   = i_updmode.
    g_s_interface-datapakid = i_datapakid.
    g_flag_interface_initialized = sbiwa_c_flag_on.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF i_t_fields TO g_t_segfields.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
LOOP AT G_T_SELECT INTO L_S_SELECT
        WHERE FIELDNM = 'ZTIMESTAMP'.
ENDLOOP.
      IF G_COUNTER_DATAPAKID = 0.
        IF L_S_SELECT-LOW = '' AND L_S_SELECT-HIGH = ''.
        OPEN CURSOR WITH HOLD G_CURSOR FOR
            SELECT (g_t_fields)
            FROM ZTRN_REC_TIME.
        ELSE.
          OPEN CURSOR WITH HOLD G_CURSOR FOR
            SELECT (g_t_fields)
            FROM ZTRN_REC_TIME
            WHERE ZTIMESTAMP >= L_S_SELECT-LOW
              AND ZTIMESTAMP <= L_S_SELECT-HIGH.
        ENDIF.
      ENDIF.
FETCH NEXT CURSOR G_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR G_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
ENDFUNCTION.
I found some similar issue in this forum by link
Generic Extractor Delta Function Module code, but still I could not get clear answer.
Can you please help me:
1)     why there is no value for i_source , how to fix it?
2)     For the delta logic for ztimestemp, is it correct?
3)     Need I modify the entries in ROOSOURCE ?
Thanks a lot !!!

Hello Andre,
        Thanks a lot for your help. I did some change , but still does not work. Could you please help check.
Now the source code are the following, It's based on the RSAX_BIW_GET_DATA_SIMPLE, as you confirm that this also supply the update mode (full, initial delta, delta).
FUNCTION RSAX_BIW_GET_DATA_TRAININGREC1.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZTRN_REC_TIME OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
Select ranges
RANGES:
        L_R_ZTIMESTAMP FOR ZTRN_REC_TIME-ZTIMESTAMP.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZTRNREC_FM'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'ZTIMESTAMP'.
      MOVE-CORRESPONDING L_S_SELECT TO L_R_ZTIMESTAMP.
      APPEND L_R_ZTIMESTAMP.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     IF L_S_SELECT-LOW = '' AND L_S_SELECT-HIGH = ''.
        OPEN CURSOR WITH HOLD S_CURSOR FOR
        SELECT (S_S_IF-T_FIELDS)
        FROM ZTRN_REC_TIME.
        ELSE.
        OPEN CURSOR WITH HOLD G_CURSOR FOR
        SELECT (S_S_IF-T_FIELDS)
        FROM ZTRN_REC_TIME
        WHERE ZTIMESTAMP >= L_S_SELECT-LOW
        AND ZTIMESTAMP <= L_S_SELECT-HIGH.
     ENDIF.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
I think it already includes the important statements you suggested.
I test this FM in RSA3, for the Full load mode, it works fine. Also if I checked the debug mode in execution , it will stop in the code and let me debug.
But when I choose other mode, like 'initializion of the delta transfer' or simulation of initial delta, I always get error 'error occurs during the extraction' .. even I choose debug mode, but it could not enter the code for debug..
Till now I did not see any parameter or value for the upload mode..
Another questions is that, in RSO2, I define Ztimestamp as my delta field.. But , can I add other field as selection condition in the datasource definition, and has its range table in this function module ?
Should I change the entries in ROOSOURCE for this datasource ??
Please let me know your feedback, do you have some concret example for generic delta extraction ?
Thanks a lot !

Help on Code for functional module generic extraction - needed.

Hi Experts,
Can you pleaese help me on : how to pass data to the structure created.
How to fill the structure in functional module extraction (structure) from i_t_final to e_t_data.
we are using include programe in the extraction.
help appreciated.
Thanks Much
kannan

Hi Shreem,
Check if the following SDN Article link is helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?QuickLink=index&overridelayout=true
http://www.erphowtos.com/guides-a-tutorials/doc_view/534-generic-extraction-using-function-module-fm.html
Best Regards,
Kush Kashyap

Delta Extraction Using Function Module ( Customization )

Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.

Hi SGK,
I've done this for a delta based on a timestamp and it's actually pretty easy. The basic steps are:
1) Create an extract structure in SE11. Make sure the structure has a date or timestamp field in it that you can use for delta. You'll need to include the field twice if you also want to extract it to BW/BI since once it's chosen as the delta field then it will be hidden in the interface.
2) Create the extractor function module in SE37. You can use RSAX_BIW_GET_DATA_SIMPLE as a template. Make sure your logic restricts the data it retrieves according to the selections that are passed in I_T_SELECT, including restrictions on the delta field.
3) Create a generic DataSource in RSO2. Click Extraction by FM then fill in your extract structure and function module. Click Generic Delta and pick your delta field and the appropriate radio button (time stamp or calendar day). If your delta field is a timestamp field then be sure to set the upper and lower safety limits to -86400 and 86400 respectively. This might not be necessary on your version of SAPI but on mine there is a bug where it doesn't translate between system time and UTC (GMT) correctly so this was necessary.
You don't need to program any special delta handling logic in your function module as long as you restrict the data you retrieve based on the delta field (I_T_SELECT). This is because the SAPI takes care of catching the init, delta and repeat requests, translating them to the appropriate delta field values, and then passing them to your function module as if it was a full extraction for a specific date or timestamp range.
Hope this helps!
Jason

R/3 Master Data Extraction Using Function Module

Hi Experts,
Could you please let me know why & How (Detail procedure) to extract R/3 master data using function module.
My team manager asked me to extract master data from R/3 for 3 more attributes of info object '0material' which is already defined as data target.
I would like to know why they are extracting data using function module
Thanks

The steps for creating extractor using Function Module. I
1. Create new Function group (if you have already not done so) in Se80
2. Copy Function module "RSAX_BIW_GET_DATA_SIMPLE" with suitable name.
3. Change the code that populate data.
Following table may give you the guideline for parameters.
Parameter Description
I_REQUNR (import) BW provides this request identifier. It is a system-generated identifier in the form REQU_XXXXXX. BW uses this same identifier in all function module calls that relate to a single load.
I_DSOURCE (import) The name of the generic extractor
I_MAXSIZE (import) The maximum number of records that BW expects to be in each data packet
I_INITFLAG (import) A Boolean flag that indicates if this is the initialization (first) call to the function module
I_READ_ONLY (import) A test flag not needed in most extraction scenarios
I_T_SELECT (table) This table holds any selections from the BW InfoPackage. The function module should examine these selections and only return data that matches the selections.
I_T_FIELD (table) This table holds the fields that BW requests
E_T_DATA (table) The function module fills this table with data records. These records then return to BW as data packets. This table has the same structure as the extract structure defined in the generic DataSource.
NO_MORE_DATA (exception) The function module raises this exception when no more data is available
ERROR_PASSED_TO_MESS_HANDLER (exception) The function module raises this exception if an error occurred during the extraction. It alerts BW to check for error logs.
Change following code to put the selection fields
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
Change following to populate data
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
below links
Re: functionmodule
Re: FM for G. extractor
***Assign points if it helps.**
Regards
CSM Reddy

Function Module not extracting records when InfoPackaged is executed

Hi,
I'm using a Function module for extracting data. The DataSource is working fine in RSA3 with a selection criteria. But when i schedule the infopackage with the same selections in the data selection tab, Its not getting me any records into BW. In the Details Tab i get the message "Error occurred in the data selection" . I guess there is a problem with the data selection. Pasted below is the code i'm using for extraction. Can anyone please let me know if there is any issue with the code.
Also how do we pass on the value of I_MAXSIZE into the function module, the remaining parameters get the values from BW. And can anyone please explain me the concept of the "s_counter_datapakid" and when it should be incremented and where it should be located in the code?
Thanks,
AM
Auxiliary Selection criteria structure
DATA: l_s_select TYPE srsc_s_select.
Maximum number of lines for DB table
STATICS: s_s_if TYPE srsc_s_if_simple,
counter
          s_counter_datapakid LIKE sy-tabix,
cursor
          s_cursor TYPE cursor.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE i_dsource.
      WHEN 'XXXXX'.
      WHEN OTHERS.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_dsource   "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
    APPEND LINES OF i_t_select TO s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF i_t_fields TO s_s_if-t_fields.
ELSE.
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF s_counter_datapakid = 0.
      g_first = 'X'.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BWLVS'.
        IF l_s_select-low <> '101' AND
           l_s_select-low <> '109'.
          RAISE invalid_movement_type.
        ELSE.
          MOVE-CORRESPONDING l_s_select TO r_im_bwlvs.
          APPEND r_im_bwlvs.
        ENDIF.
      ENDLOOP.
      LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BEGDA'.
        MOVE-CORRESPONDING l_s_select TO r_im_begda.
        r_im_begda-low0(4) = l_s_select-low6(4).
        r_im_begda-low4(2) = l_s_select-low0(2).
        r_im_begda-low6(2) = l_s_select-low3(2).
        APPEND r_im_begda.
      ENDLOOP.
      LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'ENDDA'.
        MOVE-CORRESPONDING l_s_select TO r_im_endda.
        r_im_endda-low0(4) = l_s_select-low6(4).
        r_im_endda-low4(2) = l_s_select-low0(2).
        r_im_endda-low6(2) = l_s_select-low3(2).
        APPEND r_im_endda.
      ENDLOOP.
*Select from table ltak into internal table i_ltak the following fields.
*Condition: where bwlvs = import bwlvs & endat is >= import begda and
<= import endda.
      READ TABLE r_im_begda INDEX 1.
      IF sy-subrc NE 0.
        RAISE blank_date_invalid.
      ELSE.
        IF r_im_begda-low IS INITIAL.
          RAISE blank_date_invalid.
        ENDIF.
      ENDIF.
      READ TABLE r_im_endda INDEX 1.
      IF sy-subrc NE 0.
        RAISE blank_date_invalid.
      ELSE.
        IF r_im_endda-low IS INITIAL.
          RAISE blank_date_invalid.
        ENDIF.
      ENDIF.
      IF NOT r_im_endda-low IS INITIAL
        AND r_im_begda-low > r_im_endda-low.
        RAISE invalid_date.
      ENDIF.
      r_endat-sign = 'I'.
      r_endat-option = 'BT'.
      r_endat-low = r_im_begda-low.
      r_endat-high = r_im_endda-low.
      APPEND r_endat.
*-- Get data from the tables
      PERFORM get_data.
*-- Populate the extract structure with data
      PERFORM write_data.
*-- Fill Export able with the extracted data
      e_t_data[] = i_zbipicprd2[].
    ENDIF.                             "First data package ?
    IF g_first EQ 'X'.
      CLEAR g_first.
    ELSE.
*-- This is important to prevent endless loop.
      RAISE no_more_data.
    ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.

The load is running successfully but its not fetching any records into BW.
In the Status tab, Step by Step Analysis the following three steps are red:
Does selectable data exist in the source system? (Red)
Data selection successfully started ? (Red)
Data selection successfully finished ? (Red)
and the below is the Analysis
Diagnosis
    The data request was a full update.
    o   In this case, the corresponding table in the source system does not
            contain any data.
    o   System Response
            Info IDoc received with status 8.
            Procedure
Check the data basis in the source system.
But i have data in R/3 and i'm able to extract it using RSA3

How to create Billing Plan in sales order using Function module /BAPI

hi,
How to create Billing Plan in sales order using Function module /BAPI
i hv check few FM such
BILLING_SCHEDULE_READ
BILLING_SCHEDULE_GET_NUMBER
BILLING_SCHEDULE_SAVE
But unable to create billing plan for a sales order.....any other method to create???

Hi,
Use this link.
Create sales order with billing plan via LSMW and BAPI BUS2032
BAPI or Function to update Billing Plan in Sales Order Items
Hope this will help you.
Regards,
Vijay

How to do data source ehancement by using "Extraction by function module"

I have one customized datasource "ZSOURCE" in R/3, this datasource use Extraction by function module, namely one functiona
module "ZBI_FM_EX"and Extract. struct "ZBI_EX".
Now I want to add one field "ZNEW" from standard SAP table LIKP into extractor "ZBI_EX" and write coding in ZXRSAU01.
Question, could I add new field "ZNEW" into Structure:"ZBI_EX"? Do I need to change anything in functional module "ZBI_FM_EX" itself?
Many Thanks!
rajatina.

Hi Dear,
It is good to write the code in your function module i.e. ZBI_FM_EX. becuase writing the code in ZXRSAU01 include program will affect the loading performance. instead of looping the data two time (one in your FM and again in ZXRSAU01 ), you can get the same will only loop.
Thanks
Obaid
Edited by: obaid shaikh on Jan 21, 2011 11:53 AM

Generic Delta Extraction via Function Module

Hello,
i need a help for a generic delta extraction based on a Function Module. As an example i take the function module RSVD_BW_GET_DELTA_DATA.
My generic delta extractor based on the field AEDAT - Change Date and i will extract purchase service orders and entry sheets.
In the sample function module the select for the extraction worked with the table ROBWQTSTAT, but this table ist empty after the initialization.
OPEN CURSOR WITH HOLD G_CURSOR FOR
      SELECT * FROM ROVERCUBE1
               WHERE COUNTRY IN L_R_COUNTRY AND
                     REGION IN L_R_REGION AND
                     KUNNR   IN L_R_KUNNR AND
                     TYPE    IN L_R_TYPE AND
                     GJAHR   IN L_R_GJAHR AND
Here the timerange calculated in form GET_TIME_INTERVAL is evaluated.
                     TSTMP   IN S_R_TSTMP AND
                     OBJVERS = 'A'.
I found the table ROOSGENDLM. In this table i found the field DELTAID with the last date of the extraction and the field REPEATID with the date for the repead-Update.
My Questions:
Is this the right way to build an generic delta extraction with an function module or must i install a coding in my function module for an update of the table ROBWQTSTAT?
Which settings are needed in the table ROOSOURCE for a generic delta extraction via function module?
Best regards
Uwe

Hi Uwe,
please have a look at https://weblogs.sdn.sap.com/pub/wlg/2415. [original link is broken] [original link is broken] [original link is broken] It might help
kind regards
Siggi
PS: We already had almost the same question here today.

Creating BW Function module to extract R3 Function module data.

Similar Messages

Maybe you are looking for