Creating Connector series in a map chart using anymap

I am trying to create a series type of connector on the map region. I can create 2 points and a line connecting them using map series type of line.
Then I can attach data to those points using custom xml. However, attached data is assoiciated with points on the map. Anychart has a series
type called "connector" which creates a connection between multiple points. If I try to change series type from "Line" to "connector", Map comes up
blank. I think the problem is that Apex does not recognize the series type "connector". Does anyone have a work around to attach data to the line rather them points.

Hi
Create a formula field and store the parameter there.
Now put this formula field in "On change of" in the Chart expert.
e.g. I have a parmeter on country and I have a chart which shows the last year sales year wise for the countries.
I create a formula field and put the below formula:
stringvar x = {?countryparameter};
Now i put this formula field in On change of so when i run the report i select the required country.
Hope this helps!!
Regards
Sourashree

Similar Messages

Creating multiple links from one map image in Flash CS4

I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

Programitically creating column series to flex chart not showing the chart

I want to create n number of series dynamically when i run my
application.
where n can be any value it depends on the data which i
retrieve from database. below i pasted the example
( in this example i have taken n = 4 i.e., CountMax=4 if i
change the CountMax=6 then it should generate 6series dynamically
after calculating the values. ). just copy the below code and paste
it in Flex builder and run the application.
in this example i am facing problem, chart series are not
showing. i dont know the reason why its not showing, if anyone got
the solutions for the problem please let me know. my actual
requirement is to retrieve data from Salesforce account and want to
populate the arraylist then display the chart.
<?xml version="1.0"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
[Bindable]
public var sArray:ArrayCollection = new ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 6;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 1; i < 10; i++)
tmpseries = 3 * Math.random();
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series.join( = [cs];
sArray.addItem({data:tmpseries});
//columnchart1.dataProvider = sArray;
cs = new ColumnSeries();
cs.dataProvider= sArray;
cs.displayName = 'Series';
cs.yField = 'data';
columnchart1.series[chartSeries] = cs;
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample"
width="195%" height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis baseAtZero="true" maximum="3"
autoAdjust="true"/>
</mx:verticalAxis>
</mx:ColumnChart>
</mx:Panel>
</mx:Application>

<?xml version="1.0"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.graphics.SolidColor;
import mx.charts.HitData;
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 3;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series = [cs];
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 0; i < 10; i++)
tmpseries
= 1 * Math.random();
if(tmpseries > 0.5)
tmpseries
= 1;
else
tmpseries = 0;
var testArrCol:ArrayCollection = new ArrayCollection();
for(var j:int =0; j < 10; j++)
var m:Number = tmpArr[j];
var m1:Number = tmpseries[j];
testArrCol.addItem({mData:m.toString(),nData:m1.toString()});
cs = new ColumnSeries();
cs.dataProvider = testArrCol;
cs.displayName = 'Series' + chartSeries;
cs.xField = 'mData';
cs.yField = 'nData';
columnchart1.series[chartSeries] = cs;
public function myTipFunction(hitData:HitData):String
return(ColumnSeries(hitData.element).displayName +" - "+
hitData.item.mData + "\n" + "Value : "+ hitData.item.nData);
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample" width="98%"
height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0"
dataTipFunction="{myTipFunction}">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxisRenderer>
<mx:AxisRenderer visible="false"/>
</mx:verticalAxisRenderer>
</mx:ColumnChart>
</mx:Panel>
</mx:Application>

How can I create a chart using data (from formulas) in my header columns?

Hello,
I'm wanting to create a chart using formula totals in my header column. When I attempt to click on the chart icon after selecting my header column, the chart button doesn't appear. Any help would be greatly appreciated. Thanks!

Move your formulas in a non header column.
In the cell A2 of the table "aux", the formula is :
=IF(ISBLANK(main :: A2),"",main :: A2)
then I applied Fill Down.
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 15:07:54
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do i Create charts using JSP/Servlet & Database

I have to create charts which shows the graph of stock exchange.
i have a database that keeps the data for creating charts.
But i did not know how to create charts using jsp-servlet.
Any Example might help me to go forward.
Any help will be really appreciated.
Please Advice me.

JFreeChart - You can generate the charts then convert them to image formats (PNG and JPEG) all using the JFreeChart API
http://www.jfree.org/jfreechart/

Creating Gantt charts using Business Graphics that can be downloaded

The short version is I need the format for XML data to create a Gantt chart in a Business Graphics UI Element in order to be able to automatically email it. The long version is...
I currently have a Web Dynpro ABAP component that displays a Gantt chart using a Business Graphics UI Element based off data in various other UI elements in the view.
This works fine and the graph displays nicely, but I cannot find a way to download that straight from the Business Graphics UI Element. Having read around the forum there appears to be two options:
- Code it up myself by calling methods on the IGS API directly
- Bind the image data attribute on the element and get the data that way
Unfortunatly, we are not currently running a recent enough version (702/720) to be able to do the latter and so, unless there is another way, I need to code up the API calls myself.
So far I have got a business graphic in to an Adobe PDF form, loaded in my config data so it appears as a Gantt chart but I cannot figure out the format for the actual data that needs to be sent through in XML. Does anyone have example XML data or code to generate it that can be sent in to the call:
l_igs_ce->set_data( EXPORTING data_doc = p_ixml_doc ).
I have used the example in GRAPHICS_IGS_CE_TEST and the page http://liualex.com/archives/185 to generate the image and load the config data in but this only explains the XML format of the chart data for bar graphs.
Many thanks

Found my answer,
This download: http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/e0a9ba90-0201-0010-d3a2-9cb376b5e181
This is the SAP Chart Designer, it contains a PDF which explains the XML format used, you can use it to manually create your own XML streams.

Create organizational charts using application express

I would like to create organizational charts using the application express(HTMLDB). How do I go about it?
I also tried the Aria sample application for HTMLDB 2.0, but when I try to run the scripts it asks for some bind variable parameters ' :NEW ' and ' :OLD ' which I could not identify. Can anybody help with understanding the standard inputs to this?

A perfectly reasonable question, phrased in
a perfectly reasonable way (in my opinion).
On this, I believe, we'll have to agree to disagree. I point you to the following document,
particularly the section "Questions Not To Ask":
I'm not sure why you feel the need to point me at a
document entitled "Questions Not To Ask",
particularly when I wasn't the one asking the
question....I pointed you to the section "Questions Not To Ask" in the document entitled "How To Ask Questions The Smart Way" not because I believe you need help asking questions, but because the advice given in that document directly contradicts your opinions:
"Q: How can I use X to do Y?
A: If what you want is to do Y, you should ask that question without pre-supposing the use of a method that may not be appropriate. Questions of this form often indicate a person who is not merely ignorant about X, but confused about what problem Y they are solving and too fixated on the details of their particular situation. It is generally best to ignore such people until they define their problem better."
I admit, I failed to follow the advice of ignoring the person when I first replied, but the issue is whether it was an appropriate question, which I think this quote clearly indicates it is not.
Robert

Creating Map IDs using HTM File Name

Is it possible to create Map IDs using the File name of the HTM, instead of its Topic Title?

While Generating Map IDs, we get an ID along with a Map # for each HTM in the CSH.
For Example, I have a HTM in my CSH with the following Details:
Topic Title - Access Masks
File Name - admpr00001.htm
Now when I create a Map ID for this page. I can customise the Map ID by setting any/all of the three options: - 'Prefix Map IDs with', 'Make Uppercase' and 'Start Numbering with'. But the Map ID is generated only based on the Topic Title.
Like - ebACCESS_MASKS 1000 where, eb is the set prefix.
Is it possible for me to create a MAP ID using the File Name. In this case, as ebadmpr00001 1000?
Hope I am clear .

Migrating from Crystal Reports Charts using TopN and "Other" to Reporting Services

I am currently migrating several Crystal Reports that have charts. The chart series is set to use the TopN values in a count, and combine the rest of the series into one series titled "Other". I see how to filter the chart using TopN, however I need to still show the rest of the data grouped as "Other". I think the solution I need is to create a group expression that uses some sort of IIF function to create the "Other" group, but I haven't found a function that I can use to get the results I need. Any ideas?
Scott

We were looking at report deployment options and evaluating SSRS vs Crystal Report Server. There were several reasons we decided to go with SSRS:
Cascading Parameters
Ability to use multiple data sets in one report
SSRS seemed more user-friendly than CRS
There were a few other considerations I can remember now, but the final reason was price. My company already had the licenses for SQL Server. However, even if that was not a consideration I still would have gone with SSRS.
Hope this info helps.
Scott

Dynamic Series creation for Plot Chart

Hi,
I am using a plot chart which takes data from an external XML file.
Based on certain fields in the data, I create 3 different plot series.
I use a Combo box to show different plot series based on the selected value from it.
I am placing another Combo box
How can do the below task:
I need to create some dynamic series based on some node elements in the series for which the chart is currently shown.
I create another Combo box to show the above generated plot series based on the selected value from it.

Hi,
I am using a plot chart which takes data from an external XML file.
Based on certain fields in the data, I create 3 different plot series.
I use a Combo box to show different plot series based on the selected value from it.
I am placing another Combo box
How can do the below task:
I need to create some dynamic series based on some node elements in the series for which the chart is currently shown.
I create another Combo box to show the above generated plot series based on the selected value from it.

Charting using ActionScript and chart height,width and axis labels

hello, i am creating charts using action script but can't
seem to do 2 things right now. 1. put labels on the axisis. 2. i
can't set the height/width to 100%. does anyone know how?...below
is the function i use to create the charts
public var myChart:BarChart;
public var series1:BarSeries;
public var legend1:Legend;
private function addGraph():void {
// Create the chart object and set some
// basic properties.
myChart = new BarChart();
myChart.showDataTips = true;
myChart.dataProvider = feedRequest.lastResult.root.data;
// Define the category axis.
var vAxis:CategoryAxis = new CategoryAxis();
vAxis.categoryField = yAxis;
vAxis.dataProvider = feedRequest.lastResult.root.data;
myChart.verticalAxis = vAxis;
myChart.width=100;
myChart.height=100;
var la = new LinearAxis;
// Add the series.
var mySeries:Array=new Array();
series1 = new BarSeries();
series1.xField=xAxis;
series1.yField=yAxis;
series1.displayName = xAxis;
mySeries.push(series1);
myChart.series = mySeries;
// Create a legend.
legend1 = new Legend();
legend1.dataProvider = myChart;
// Attach chart and legend to the display list.
chartWindow.addChild(myChart);
chartWindow.visible=true;
}

use the percentWidth and percentHeight properties.

Pareto Chart using Report Generation Tool kit

Hi,
Please help me to get clarification for the following:
I need to log data into MS Excel Report and generate Pareto Chart using LabVIEW for the Logged data.
I have Report Generation Tool kit. but i couldnt find the an option to generate Pareto chart with it.
Thanks,
Thirumala.

One way is to Create a Excel template in the predefined format with the rows/colums linked for the Chart.
Use this template with report generation toolkit to populate data in the predefined cells.Based on that the chart will be automatically updated.

Drill Down for Multiple Series in a Line Chart

Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.

This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense.

How to reset drill-down column-chart based on map-chart?

Hi guys,
I'm facing pritty common issue while designing one of my dashboards. Let me describe a little bit more:
1. I have some data extracted from BW using Query as WebService into my Xcelsius spreadsheet.
2. I have map-chart - regions for some country.
3. I have a drill-down column-chart, which displays data for a selected region.
At the beginning column-chart displays results for entire country (which, in fact, is not exactly drill-down). The issue I'm fasing is, that in case I select any region and the data is drilled-down into my column-chart, I have no option to show data for the entire county in the column-chart anymore (the only one way is to restart the report).
Are there any possible way to do this, or am I doing a design error while displaying data, which is not drilled-down, into a chart which is intended to display drill-down data only?
Any help would be highly appreciated.
Thanks in advance.
Ivaylo Mutafchiev
Varna Business Services
Project Manager BOBJ

Ivaylo Mutafchiev,
I understand your problem now. So your column chart data which is coming from the QAAWS query should be having a prompt which is bound to some cell in excel. and your map might be passing the values for prompt isn't it? in your case the map might be passing a region.
All you need to do is put the prompt in the web service for region as a optional prompt. Now pull in a check box or a Push button(name it as reset or something.). while binding the data to the check box or push button (source data) bind it to a blank cell. when user clicks on it , it passes a blank vlaue to the region(this is ur input for region) which will inturn makes the prompt optional for the region web service. which should pull all the data for all the region.
The whole idea lies in somehow passing a blank cell to your web service whose region prompt is optional.
Thanks,
Karthik

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

Creating Connector series in a map chart using anymap

Similar Messages

Maybe you are looking for