Creating CRM 7.0 Activity from ISU SAP GUI (CIC0)

Hello Guys!
I need to create CRM 7 Activity from ISU SAP GUI cic0 screen using actiion box. Can any one please help me out what would be the best way calling CRM 7 activity from ISU SAP GUI, with my understanding the CRM 7 would not support sap gui and have to use webclient technology.
My scenario: Creating activity in CRM 7.0 from ISU GUI.
Existing process is creating an activity in CRM 4 from ISU SAP GUI, now business would like to move from CRM 4 to CRM 7. I need to find out or give suggestions to business what would be the best approach or solution to create CRM 7.0 activity from ISU point of as business would not like to use CRM WebClient screen to create activities. I need help on how i can suggest the busines.
Please help me out as i am new to ISU and hope you have understood my requirements.
Thank you in advance
Regards
shankar

Hi ,
Kindly use the Transaction launcher service using the Customization :
SPRO > CRM > UI Framework > Technical Role Definition > Transaction Launcher > Configure Transaction Launcher
SPRO > CRM > Interaction Center WebClient > Basic Functions > Transaction Launcher > Configure Transaction Launcher (Wizard)
Kindly read help documentation next to it for details.
Hope this helps.
Regards,
Anup

Similar Messages

In need of help going from Windows SAP GUI to Mac/Java SAP GUI 7.20

Hi Everyone, first post...I want to thank you in advance for any assistance you are able to provide.
I got everything working except for 1 out of 6 servers I need to connect to - of course this is the most important one.
It all comes down to the conversion of saplogon.ini to the new file format, instead of using the GUI to make a list I have created 6 individual .sapc files that I run directly. I found some converters but only had so much success with them, nothing solid and 100% full proof.
I'm going to post my windows config files and maybe you can tell me why logging into this system GP8 doesn't work from my mac?
saplogon.ini (I believe it's item 4 that is the full config for the server I'm trying to connect to)
[Configuration]
SessManNewKey=80
MessageServerTimeout=10
WithWizard=0
ConfirmDelete=1
NoEditFunctionality=0
SapguiHexdumpActivated=0
SapguiTraceActivated=0
SapguiTraceLevel=1
SapguiNTCmdOpts=
[Router]
Item1=
Item2=
Item3=
Item4=
Item5=/H/10.201.200.27/saprouter.fa.de/H/
Item6=
[Router2]
Item1=
Item2=
Item3=
Item4=
Item5=
Item6=
[RouterChoice]
Item1=0
Item2=0
Item3=0
Item4=0
Item5=0
Item6=0
[Server]
Item1=171.18.85.21
Item2=171.18.85.26
Item3=GI7001.trans.de
Item4=PUBLIC
Item5=gtlson10.fa.biz
Item6=gtlson19.fa.biz
[Database]
Item1=00
Item2=01
Item3=34
Item4=88
Item5=26
Item6=21
[System]
Item1=3
Item2=3
Item3=3
Item4=3
Item5=3
Item6=3
[Description]
Item1=ASNA PRD
Item2=ASNA TST
Item3=GI7
Item4=GP8
Item5=JPF
Item6=JPW
[Address]
Item1=
Item2=
Item3=
Item4=141.228.205.97
Item5=
Item6=
[MSSysName]
Item1=PRD
Item2=TST
Item3=GI7
Item4=GP8
Item5=JPF
Item6=JPW
[MSSrvName]
Item1=
Item2=
Item3=
Item4=gp8001.trans.de
Item5=
Item6=
[MSSrvPort]
Item1=
Item2=
Item3=
Item4=sapmsGP8
Item5=
Item6=
[SessManKey]
Item1=-1
Item2=-1
Item3=-1
Item4=-1
Item5=-1
Item6=-1
[SncName]
Item1=
Item2=
Item3=
Item4=
Item5=
Item6=
[SncChoice]
Item1=-1
Item2=-1
Item3=-1
Item4=-1
Item5=-1
Item6=-1
[Codepage]
Item1=1100
Item2=1100
Item3=1100
Item4=1100
Item5=1100
Item6=1100
[CodepageIndex]
Item1=-1
Item2=-1
Item3=-1
Item4=-1
Item5=-1
Item6=-1
[Origin]
Item1=USEREDIT
Item2=USEREDIT
Item3=USEREDIT
Item4=MS_SEL_GROUPS
Item5=USEREDIT
Item6=USEREDIT
[LowSpeedConnection]
Item1=0
Item2=0
Item3=0
Item4=0
Item5=0
Item6=0
[MSWinPos]
NormX=324
NormY=263
[MSLast]
MSLast=GP8
[Utf8Off]
Item1=0
Item2=0
Item3=0
Item4=0
Item5=0
Item6=0
[EntryKey]
Item1=
Item2=
Item3=
Item4=
Item5=
Item6=
[EncodingID]
Item1=DEFAULT_NON_UC
Item2=DEFAULT_NON_UC
Item3=DEFAULT_NON_UC
Item4=DEFAULT_NON_UC
Item5=DEFAULT_NON_UC
Item6=DEFAULT_NON_UC
[ShortcutType]
Item1=0
Item2=0
Item3=0
Item4=0
Item5=0
Item6=0
[ShortcutString]
Item1=
Item2=
Item3=
Item4=
Item5=
Item6=
[ShortcutTo]
Item1=
Item2=
Item3=
Item4=
Item5=
Item6=
[ShortcutBy]
Item1=
Item2=
Item3=
Item4=
Item5=
Item6=
Another file I think is important: sapmsg.ini
[Message Server]
MSS=MSSAP00
MST=SAPTST00
MS1=SAPDEV00
MSX=sapsbx99
MSU=sapmsu99
APP=apoapp00
MBW=mssapbw
APT=apotst00
APS=aposbx00
MB1=sapdevbw
MBT=saptstbw
P01=dryrun00
MS2=sapms299
MBX=sapsbxbw
GP8=gp8001.trans.de
Another file that may be important?
SAPROUTE.ini
[Router]
sapprd=/H/10.201.200.21/H/saprouter.fa.com/H/
gtlson10.fa.biz=/H/10.200.201.21/H/saprouter.fa.com/H/saprouter.fa.de/H/
This is what my *.sapc file looks like after changing it up a few times, I am certain it is wrong:
conn=/H/gp8001.trans.de/&clnt=401&expert=true
Please tell me from all the info you have here what needs to take place for me to be able to connect to GP8. Can I do it from an sapc file? Do I have to configure other core files and go to my preferences and tell SAP to look at certain configs? I'm sure someone here can help me.
Thanks so much for your time
John
Edited by: nstabl on Feb 27, 2012 10:07 PM

Hello John,
please try the "SAP GUI for Java Configuration Generator Scripts" available at http://scn.sap.com/docs/DOC-25456#section9 .
For using the message server to connect to GP8, the information of the port number of the message server for GP8 is missing. For direct connection to GP8, it might work to use the connection string "conn=/H/gp8001.trans.de/S/3288" .
Best regards
Rolf-Martin
Message was edited by: Rolf-Martin Woersinger
update link, which was broken after SCN upgrade

Viewing a report from BW SAP GUI using report_view.aspx doesn't work

Hello,
when viewing reports in SAP GUI from our BW system no report as an output is showed. I can only see Infoview page and it doesn't matter whether I insert whole URL with report ID, client etc. or only report basic page.
http://<server_name>:8080/businessobjects/enterprise115/sap/infoview/report/report_view.aspx?bw_id=<report_id>&sap_sysid=<SID>&sap_client=<client>&language=EN&cmsname=<crystal_server_name>
http://<server_name>:8080/businessobjects/enterprise115/sap/infoview/report/report_view.aspx
This URL will prompt for password and then redirect me to Infoview .NET page only without report output. When I click on the report from InfoView everything is working well I can see the report output. Only from SAP GUI the URL link is not working. I configured /crystal/rptadmin details as per SDN Ingo's blog. I also configured SAP roles for folders in InfoView under path /SAP/2.0/. And all other post steps from Installation guide.
One OSS note 1219551 which refers to this problem doesn't help me either, altough I patched BOE XI R2 with latest SP6.
Version of Crystal report is BOE XI R2 with SP6. SAP system is NW 04 with BW component.
Does anyone have the same problem ?
Thanks.

Problem solved.

Diagnosing if the EUP is up from inside SAP GUI??

What transaction code, will show you if users are logged in through the GUI or the Portal. Through sm04 you can see the session type as being "GUI" but how can I diagnose, from the SAP side whether users are able to get in through the portal. I always thought that a "RFC" (Remote Function Call) would show up as being the session type through sm04, if the user was coming in through the PortalI'm a SAP Basis Admin, who only comes in through the GUI. Please advise..Thanks.

Hello James,
it depends what iViews are used. If the Users use RFC-IViews then you will see RFC Sessions. When they use a SAP Transactin iView you will see a GUI Session. But they can also use BSP IViews.
Regards
Gregor

EDI Sales order creation in CRM through inbound IDocs from non SAP system

Hi Friends,
We are having a scenario where we need to create a Sales Order in CRM for a B2B EDI transmission through IDoc. Customer is sending the EDI Transmission of his Sales order , which is passing through PI and then reaching to CRM to create a Sales order.This is the design we need to follow to make it happen,we are initially trying to create an order using WE19 for testing and the details are:
Basic Type - CRMXIF_ORDER_SAVE_M01
Message Type - CRMXIF_ORDER_SAVE_M
Functional Module - APPL_IDOC_INPUTI which is automatically giving a status text as " Function module CRMXIF_ORDER_SAVE has been called successfully", but no sales order is saved in CRM.
We are getting idocs posted successfully with status 53 with the statuses sequence 74, 50 ,64, 62 and 53.Our issue is inspire of the Idoc having status 53 and the FM called successfully we are not seeing the sales order created in CRM.
We are stuck here no sales order is created in CRM.
Are we missing any config. - set up - Prerequisit - Any OSS note need to be applied -- ANy middle ware setting ?
Any help will be greatly appreciated.
Thanks
Vijay

Hi Christophe,
Awesome!!!!!! it worked, You are the best.
I could able to create a sales order in CRM,but below are the valid data I passed in the respective segment fields.Except for first 3 values rest all did not get reflected in teh Sales order.I feel i am missing some qualifiers.
Can you kindly share the IDoc data to be passed in...along with respective segments and fields:
Segment                                                 Field
E101CRMXIF_BUSTRANS     OBJECT_TASK
E101CRMXIF_BUSTRANS     PROCESS_TYPE
E101CRMXIF_BUSTRANS     POSTING_DATE
E101CRMXIF_PARTNER                          PARTNER_NO
E101CRMXIF_PARTNER                RELATION_PARTNER_NO
E101CRMXIF_ORGMAN         SALES_ORG
E101CRMXIF_ORGMAN          DIS_CHANNEL
E101CRMXIF_ORGMAN         DIVISION
E101CRMXIF_SALES             PO_NUMBER_SOLD
E101CRMXIF_SALES            YOUR_REF_SOLD
E101CRMXIF_SALES            PO_NUMBER_SHIP
E101CRMXIF_BUSTRANS_ITEM     ITEM_NUMBER
E101CRMXIF_BUSTRANS_ITEM     ITEM_TYPE
E101CRMXIF_BUSTRANS_ITEM     ORDERED_PRODUCT
E101CRMXIF_PRODUCT_I     PROCESS_QTY_UNIT
E101CRMXIF_PRODUCT_I     PROCESS_QTY_UNIT_ISO
E101CRMXIF_PRODUCT_I     BASE_QTY_UNIT
E101CRMXIF_PRODUCT_I     BASE_QTY_UNIT_ISO
E101CRMXIF_SCHEDLIN_I     ORDER_QTY
Thanks a ton in advance .
Vijay

How to open Crystal Report from the SAP GUI ?

Hi experts,
We have developed some reports for our ECC 6.0 system by using Crystal Report 2008 and SAP integration kit , these reports are published to BO edge 3.1 server. To view the report, our user have to open IE and login Infoview first.
For convenience, we want to open Crystal report from SAPGUI directly without login BOE, How can we do it?
Thanks.

Hi
please take a look here
Crystal Reports
Regards,
STratos

Open URL from SAP GUI

Hi,
I create Business Contacts with BAPI_BCONTACT_CREATEFROMDATA from an external application.
Is it possible to add a URL to this contact, that can be opened from the SAP GUI?
Our customer uses the native windows sap gui. The browser should open and load the
URL if you click on the it.
Any hints how this could be done?
   Thomas

Hi,
Here is a demo.
   CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
    document               = 'http://www.sap.com'
    operation              = 'OPEN'
EXCEPTIONS
    cntl_error             = 1
    error_no_gui           = 2
    bad_parameter          = 3
    file_not_found         = 4
    path_not_found         = 5
    file_extension_unknown = 6
    error_execute_failed   = 7
    synchronous_failed     = 8
    not_supported_by_gui   = 9
    others                 = 10
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
hope this helps u.,
Thanks & Regards,
Sukai

Problem with starting Crystal Report document from SAP Gui

Dear all,
in Crystal Reports I created my first report (based on a BW query), which is executed successfully, when I run it directly from CR or from Infoview. The report is stored directly in BW and has been published successfulyl to BOE.
If I try to run it native from the SAP Gui, the following steps happen:
Internet Explorer is started with the following link:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/ce_url?(ce_protcl):(DS)(ce_server)/(ce_path_pr)/viewreport.csp(Q)bw_id=4I4B2HQG8KK2ICFPONVIG5D9Q&sap_sysid=(sysid)&sap_client=010&language=EN&sap-client=010
this link is transcoded to the following:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/=ce_protcl)%3a//MONHAMBO020.world.mon:8080%2fSAP%2fviewreport.csp(Q&sap_sysid=BWP&sap_client=010&language=EN&sap-client=010&sap-language=EN&cmsname=MONHAMBO020.world.mon
(I already entered /CRYSTAL/CL_BW_HTTP_HANDLER handler in the ce_url service)
and afterwards I get an error 404 -> corresponding service not available
which is obvious, as a service =ce_protcl is not existing at alkl.
If I then execute my CR document again from SAPGui (without closing the IE), the standard BOE login page for the infoview is displayed, but I get an error:
Account information not recognized: The credentials passed to secSAPR3 [] are invalid. Use the following format: sid~clnt/user
I can logon with my BW credentials, and afterwards I can see my CR document.
Any idea, what went wrong?
Thanks,
Andreas

Dear Ingo,
the basic installation of all BOE components was done by the SAP installation service and I checked several times your blog(s) and the corresponding parts on the BOE server and in BW. From my point of view we did all necessary configuration steps on BOE and BW (/CRYSTAL/RPTADMIN) which are necessary to setup the BOE software and the connections.
I checked again the HTTP handler and it still says: /CRYSTAL/CL_BW_HTTP_HANDLER
I stopped and restarted the service, but with no effect at all -> I do not think that I need a restart of the server, right?
My user is as well existing on the BOE server and I can logon to the BOE with my SAP credentials.
I guess as well that the key to the success is the HTTP handler. The first link I provided is the link that is shown in IE, before I logged on to the BW server and I think this is correct, as the transcodification is done after(!) I logged on to the BW server.
A part of the transcodification is as well working, as I can see the replacement of my ce_server, sysid, etc. But it seems to me that the first part of the string is crap:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/=ce_protcl)%3a
Any further ideas?
Thanks and best regards,
Andreas

Call SAP GUI txn from WD4A running in the SAP GUI

I'm somewhat new to Web Dynpro and I'm trying to evaluate the use of WD4A as our main custom screen/txn platform. I have written a simple application. I created a transaction code that calls WDYID and launches my WD4A application in the SAP GUI.
Our company does a lot of "CALL TRANSACTION" in our normal dynpro development and I need to prove out that it is possible to do the same in WD4A. I've used the following code to try and call a transaction:
CALL METHOD lo_window_manager->create_external_window
    EXPORTING
      url           =
'http://<host>:<port>/sap/bc/gui/sap/its/webgui?sap-client=<client>&~TRANSACTION=VA03'
     title          = 'Display Orderl'
*    MODAL          = ABAP_FALSE
*    HAS_MENUBAR    = ABAP_TRUE
*    IS_RESIZABLE   = ABAP_TRUE
*    HAS_SCROLLBARS = ABAP_TRUE
*    HAS_STATUSBAR = ABAP_TRUE
*    HAS_TOOLBAR    = ABAP_TRUE
*    HAS_LOCATION   = ABAP_TRUE
    RECEIVING
      window         = lo_wd_window.
The problem with this is that when called from the SAP GUI, it launches a browser. I would like for it to go directly to the WebGUI version of VA03.
Is this possible?

Hi Adam,
you should be able to suspend to an ITS call.
- however you might fall foul of a bug - fixed in note 1255292 (Special characters not permitted for suspend/redirect)
Not sure if this is what is causing the issue...
Can you not pass parameters to the transaction using the CL_WDR_SAPGUI_INTEGRATION2->FIRE method?
this is what is called by the FIRE_START_TRANSACTION method, but allows for additional parameters.(I've never used it myself so I'm not sure that it would work, but would be interesting to find out - could you let us know?)
Cheers,
Chris

Deleting AET custom field from the SAP tableu2019s level.

Hi experts,
I am deleting few un-used custom fields in AET. I am able to see delete symbol as status in AET. Although deleted custom fields are present in lot of structure and tables (eg: CRMD_ORDERADM_H) in SAP GUI tables. I want to delete the custom field from SAP GUI tables and structures.
I tried to delete custom field from the SAP GUI tableu2019s level. But it is not allowing.
Please get me some clue on deleting custom field from the SAP GUI tableu2019s level.
Thanks in advance
Chand

Hi,
The deletion of custom field in AET happens in two steps:
1. You select a custom field that you want to delete, than you press on the delete icon in the Custom Field Assignment Block.
Doing this, you mark the selected custom field to be deleted.
2. You press on "Save and Generate" button. The "Save" will persist the deletion mark of the custom field. It means the custom field is marked to be deleted in the database. The "Generate" will process all the deletion of objects which are needed to delete the custom field, for example: Domain, Data Element, Append, etc.
If the "Generate" does not happen due any reason, the deletion mark is already persisted in DB. It means, later on if you go back to AET, you will see that the custom field is marked to be deleted, but it is not yet deleted.
If you do not press "Save and Generate" button at all, it means, you do not persist the deletion mark in DB. Later on if you go back to AET, you won't see that the custom field marked to be deleted.
Note: Please make sure, "Generation" is only applied for field that is flagged to be generated. The "Generate" flag column is by default hidden. You can use personlization to show the column.
Regards,
Steve

Hide Command field (where users enter transaction codes in SAP GUI)

In our requirement, the custom SAP transaction will be launched on CRM Web UI through transaction launcher technique (when users clicks a hyperlink on CRM UI)
But business people are asking us to not provide the user to enter transaction codes in command field. They don't want User's see command field when the back-end SAP GUI is displayed on CRM UI through transaction launcher and they don't want the user to navigate to any transaction from the SAP GUI. Please let us know you comments on this. Is this possible, if so please guide me?

Hi Madhu,
This is a question for SAP basis.
One work around could be that the the users who would use ITS screens should not have any other AUTH objects for executing other TCODES. And when they try to do so they will get an error message like you do in a normal SAP GUI.
Basis can configure this by running a Auth Trace.
Hope it helps.
Thanks

WebDynpro in HTMLControl of SAP-GUI?

Hi,
I want to call my WebDynpro Application from the SAP-GUI in a HTML-Control. Displaying is not the problem, but I also want to notice in SAP-GUI application (which called the WebDynpro) which button was pressed by the user in WebDynpro. Is this possible???
In HTML and BSP there is the possibility to fire the event "sapevent".
Best Regards
Katharina

Hi
It seems something new :). But what you can do is try to capture the id of the button and set it in a context variable. Say for example if the id of the button is "Close" then you can fire a exit plug in the Window interface view of the component.
To create a exit plug to the component
Open your Window Interface View.
Create a Outbound plug and define it of type "exit plug"
Define a url parameter "Url" (It has to be exactly the way i have mentioned (Url)"). Now this url could be some empty page or something.
This is just an idea. Let me know if that helps you in the situation. I have done it from WebDynpro to SAPGUi, but not the other way around :).
Let me know if that helped you.
regards
ravi

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

WebDynpro with embedded SAP GUI for HTML transaction

Hello,
I have been given a requirement for a WebDynpro application that will have some links and figures at the top and underneath that there will be a SAP GUI for HTML transaction visible. What is the best method for handling this type of scenario? This is a 7.0 portal connecting to ECC 5.0 on the back-end.
Thanks,
Bert

Hello Bert,
I would have implemented your scenario in following way:
1. Create a transaction iView in portal using SAP GUI for HTML.
2. In the web dynpro application, you have multiple choices to use the transaction iview created in above step.
         a. Use a IFrame UI element giving it the portal based url for the transaction iview
         b. Use POrtal Navigation API to navigate to the transaction iview.
         WDPortalNavigation.navigateAbsolute(
         "ROLES://portal_content/com.sap.PageNavigationProject/com.sap.TargetPage",
            WDPortalNavigationMode.SHOW_INPLACE,
            (String) null,
            (String) null,
            WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
            (String) null,
            (String) null,
            [<url params>]
Hope this helps you.
Regards,
Prasanna

Configure Acrobat Reader tool buttons when Reader is started inside SAP GUI

Hi,
we have deployed some registry keys in "HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGerneral\cToolbars" to show some tool buttons in Acrobat Reader. This works fine when starting Acrobat Reader as standalone application.
But in SAP GUI the Acrobat Reader starts with default tool buttons.
Is there a chance to configure the Acrobat Reader tool buttons when the Reader is started inside a SAP GUI session?
thanks
Albert

These are the settings in the registry to show/hide tools in the Adobe Reader 9 toolbar.
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cBasicTools\cInternalButtons]
"a0"="Select"
"a1"="Hand"
"a2"="Zoomin"
"a3"="ZoomDrag"
"a4"="endBasicToolsGroup"
"a5"="ZoomViewOut"
"a6"="ZoomViewIn"
"a7"="ZoomTo"
"a8"="Zoom100"
"a9"="FitWidth"
"a10"="FitPage"
"a11"="endZoomTypeGroup"
"a12"="PanAndZoom"
"a13"="Loupe"
"a14"="SelectGraphics"
"a15"="endZoomToolsGroup"
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cCommenting\cStamp]
"bInternalExpanded"=dword:00000001
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cFile\cInternalButtons]
"a1"="Print"
"a2"="Save"
"a3"="SaveFileAs"
"a4"="FindDialog"
"a5"="endDialogGroup"
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cPageDisplay\cInternalButtons]
"a0"="endLayoutZoomTypeGroup"
"a1"="Fullscreen"
"a2"="endPageLayoutViewGroup"
"a3"="RotateCCW"
"a4"="RotateCW"
"a5"="Wireframe"
When starting Adobe Reader standalone this works fine.
But starting Adobe Reader from a SAP GUI Session (for example in transaction CV03N) the default tools will be shown.
Is there a chance to configure the Acrobat Reader tool buttons when the Reader is started inside a SAP GUI session?
thanks
Albert

Creating CRM 7.0 Activity from ISU SAP GUI (CIC0)

Similar Messages

Maybe you are looking for