Creating Custom Theme for Power View Clustered columns chart

Helllo...
Is it possible to create custom theme for displaying clustered columns chart on Power View?
Basically I am looking to create chart with specific colors for the bars? For e.g. for High - RED, Medium - Orange and Low - Yellow color. When I look at themes available in Excel 2013 I don't see this combination as such, so I was looking to create one
myself.
I tried to create a theme using video on youtube, but the theme which I created is not showing up in Power View mode in excel 2013.
www.youtube.com/watch?v=xs2F1n2-YR8

Hi Sagar,
In Power View, it has several default theme colors for us to apply to our workbook. Also, we can change the Font, Text Size and Background of the chart. However, it is not support to design a custom theme color.
You can refer to the following steps to change the theme colors:
1. On the POWER VIEW tab, in the Themes group, click Themes.
2. Under Built-in, click the theme that you want to use.
Please refer to the following screenshot below:
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Similar Messages

How do I leverage a custom theme for Outlook 2013?

Microsoft has a problem. They use the term "theme" in Office in 2 different ways: 1) the 3 background colors you can choose of the Office applications and 2) a collection of colors, fonts, and layout that can be customized and defined by the user
for the applications.
I know how to create a theme in PowerPoint and save it as a default for all new presentations. Allegedly you can you this across Office applications but this is where it breaks down (as far as my user experience goes).
I've created a theme in PowerPoint. It has my custom colors. I want to use that same collection in Outlook.
I can apply it on a email by email basis (Options menu for an email), but I want the default email (new or reply) to use that custom theme. I see my theme in the drop down menu under a heading of Custom, but there isn't a way to set it as default
(behavior differs from PowerPoint here).
So I look under the Outlook File menu, then Options and select Mail. You can change stationary, but the custom theme isn't an option there.
Then there is Styles under the Format Text menu when in a new email. There are color options and font options, but again, no way to leverage the work I did in creating the custom theme.
Searching on customizing themes for Outlook only gets me answers on the first use of the word theme, not the latter.
Is there no way to you the theme I created for Outlook 2013?

Its very simple - if you want a product that remains consistent and does not change its layout every few years, that is fully customizable, and will remain being supported by subsequent operating systems, then get an open source product running in an open
source OS. It seems that you can no longer rely on MS to provide consistency, stability, or support for their own products.
When will MS realise that customer familiarity with their products is their intellectual property, like branding, which you would never trash every five years. Imagine that MS wanted to change their name to a new company name, or their Outlook brand to Inlook
- it would never happen. So why is thee trade getup and arrangement changing so often and against what their customers want? Is it to justify thee new products? Maybe with cloud and 365, they will finally be happy and stop mucking about with what works (after
they change everything back to '95 /XP format?).

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create custom template for webcenter portal application

Hi,
I created webcenter portal application in my jdev using the webcenter portal application template provided by the webcenter framework.
I tried to create custom template for my application by following steps:
1. Created new application using webcenter portal application template with all default package structure.
2. Right click pagetemplates folder under webcontent package and select new option.
3. New gallery opens up.
4. Selected JSF under webtier and JSF Page Template under items in the right hand side and clicked Ok button.
5. New wizard opens up for creating new JSF page template.
6. Gave template name(file name) and Page Template Name(template def name).
7. Selected checkbox staing start a Quick Start Layout and selected three column layout and selected Ok.
8. Selected checkbox for Create Associated ADFm Page Defination(so that page templates can be changes at run time).
9. Created some Facet Definations (header, footer, content1, content2, LHN, RHN).
10. Clicked Ok button which will create custom template.
11. Added some Panel Group Layout component from Component Palette.
12. Created new page (.jspx) with this template.
Now when I try to add producer portlets created using Producer Portlet application template and connected to the above application using WSRP2.0, I'm facing problem.
The prolem is that I'm not able to add more than one portlet in one single page?
Kindly let me know whether the steps followed by me is wrong some where and needs to corrected and let me know how I can add more than one portlet to page?
Basically I cant see more than one placeholders in my page to add portlets.

Thanks Yannick.
In the step 9 I had mentioned that I created various facet definations (header, footer, content, content1 RHN and LHN).
Is this is not facet you are talking about or should I drop facet ref from the resource palette?
Can't I add moer than one portlet to my page at design time itself?
Annoying since in weblogic portal we do this at design time(.portal).

Microsoft BI Semantic Model for Power View is missing in data source

Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013

Hi Sanjay,
I resolved the issue.Follow the steps
1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
Deployed to:,if not then deploy that for your web application.
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

Custom Theme for Nokia 6500C

I would like to create a custom theme for my phone but I have some problems. First of all, how do I create a theme? And secondly, how do I transfer it into my phone, Nokia 6500C?

Seems to be not supported any more.

Is it possible to create custom buttons for quizzes in Adobe Presenter?

My company is not happy with the quiz buttons in Adobe Presenter and I was wondering if it is possibe to create custom buttons for quizzes and use them as defaults. Like you can do in Captivate. I'm using Adobe Presenter 8 in Windows 7.

Hi,
Do you want to change the appearance and position of buttons ?
or
Do you want to change the action when the button is pressed ?
Thanks,
Alpi Agarwal

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

To create custom colors for exception

Hi experts......
I need to create custom colors for my report in order to set exceptions. Shades of red,yellow and green is just not enough for my client, they want to see blue as well when certain exception rises. Can someone please give me a hint as to how to implement that ...is it got to do st with the mime repository?
Thnaks in advance!
Tina

Hi Tina,
You can do this by formatting in the workbook. Run the query and in the workbook, on the BEx toolbar, there is a button for formatting. Select the exception cell whose color you want to change > in the Format button choos epatterns and select the color you would like. Once you have made the changes, save the workbook. The changes will remain in place the next time the user runs this workbook.
Take a look at this link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a559ee09411d2acb90000e829fbfe/content.htm
Hope this helps...

Problem when creating a tcode for maintainence view

when i'm trying to create a tcode for maintainence view of table ,i used to fields view name: here i gave the table name;
update : x
now when i activated and executed the tocde the screen is showing some abnormal values in the display..this is happening in the development server..can any one help me on this..i can send the screen shot if required..thanks in advance,,
challa

hi,
thank you.
i have done the same...but here i dont want to skip the intial screen...so i didnt check that box..now comes the problem ..i can see some boxes with 'x' at the end of the paarameters..give me u r mail id i can send u the screen shot..
thanks,
challa

How to Change Analysis Services Server for Power View

I can't seem to figure out how to change what SSAS server/instance that is used to build the cubes for Power View items uploaded to SharePoint. I tried changed the trusted servers listed in the Excel Services service application but if I remove the original
SSAS server (which of course is a test server, not to be used for production) and have only the prod SSAS instance listed the reports fail to load with the generic 400 error. Is there another setting that I'm missing?
Thanks,
Kyle

Hi ,
Since this issue is related to SQL Server, I will move this thread to SQL Server forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How to create customer exit for characteristic variables and for text vars.

hi friends,
can anybody tell me how to create customer exit for characteristic variables and for text variables in bw ides system.
thanks,
sree

Hi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys

How to set custom widths for a particular report column?

how could I set a custom width for a particular report column? Is there a way to do it using css?
Thank you.

Hi Leland,
I have tested this here: [http://apex.oracle.com/pls/otn/f?p=267:18]
All I have done is add the following into the report's Region Header:
<style type="text/css">
#apexir_EMPNO {width:200px}
#apexir_ENAME {width:200px}
#apexir_DEPTNO {width:200px}
.apexir_WORKSHEET_DATA TR TD {height:100px;}
</style>The headers have all be set to be left-aligned. Each column should be 200px wide (even though I'm setting the width on the headers, it will be applied to the entire column unless a cell's contents is wider, in which case the column is made wider). The final entry above adjusts the height of all TDs within the IR table.
Andy

Report Viewer 2010 Column chart Side Margin

Hi,
In Report Viewer 2010 Column chart, there is a side margin between x-axis and first column. There is only option to Enable or Disable it but i would like to have this with some small width or custom value.
How can i reduce side margin in Report Viewer 2010 Column chart?
Regards,
RajeshPuniya

Hi RajeshPuniya,
In Reporting Service, we can only enable or disable the side margins on the X-Axis of the chart. There is no such feature support us to customize the width of the side margin.
Personally, I understand your feeling and how frustrated when you find this issue. So, it is my pleasure to help you to reflect your recommendation to the proper department for their consideration. Please feel free to submit your situation on our product
to the following link:
https://connect.microsoft.com/SQLServer/Feedback. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How do you combine a stacked column chart with a clustered column chart

Hello,
I am trying to combine a stacked column chart with a clustered column chart. I know that in Excel there is a way to trick that described on the next site: http://people.stfx.ca/bliengme/ExcelTips/Columns.htm
Is that possible with BI Publisher?
Thank you very much!
Codruta Crisan

Finally I get it myself:
You need to use graph type as BAR_VERT_STACK2Y and the declare the series that you want to see on the first Y vertical bar as assignedToY2="false" and the ones that you wanr to see on the second Y vertical bar as assignedToY2="true".
In my case I use 4 Series, 2 stack on the first clustured column and 2 stacked on the second (2Y) clustured colum....see below
graphType="BAR_VERT_STACK2Y">
<SeriesItems>
<Series id="0" assignedToY2="false" color="#BBD6E7"/>
<Series id="1" assignedToY2="false"/>
<Series id="2" assignedToY2="true" color="#004A96"/>
<Series id="3" assignedToY2="true"/>
</SeriesItems>

Creating Custom Theme for Power View Clustered columns chart

Similar Messages

Maybe you are looking for