Creating Distribution List and Member in Office 365

Hi Guys,
My requirements is to write the .Net web-service through which i need to creating the below in office 365 programmatically. Can anyone suggest which way to go. I know there are Rest Web service for it but i need to know whether we can do it through Office
365 API's.
1) Distribution List
2) Member

You cannot create or modify distribution lists in the Global Address List via the Office 365 APIs. You would need to use PowerShell cmdlets to do this.

Similar Messages

Creating distribution lists in SAP CRM 5.0 business workplace

Hi Experts,
We have CRM 5.0 and I have tried to create distribution lists for
mailsending.
After defining a name and a folder (that is then created) for the
list the recipient list insertion is a following task.
I can search for partners of different type by F4 help but no
matter the type of the partner searched - the type that is
automatically entered to the lists recipents table is "shared
distribution list". even though the desired type is among others
in a list other values cannot be selected.
Please help, is this a setting that can be undone or what might
be a problem in the procedure that i use in creating a list?
has anyone else had similar problems?
Thank You so much,

i have received an answer from SAP:
"The reason for the error is a wrong entry in table TBCS_RECIP. To removethis entry, please use the report which is entered in the description
of note 735795 or delete the wrong entry direct on table TBCS_RECIP.
After the run of the report or the deletion on table TBCS_RECIP you willnot find further the selection option 'Business Partner' on the F4 help."
The entry was removed and for Lists business partners cannot be selected at all - as a standard. really sad endeed.

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

How to sync changes in user-created distributions lists when used by multiple Outlook users

Hi all,
Thanks for looking at my post. We are using Outlook exchange and Outlook 2010.
I have created a distribution list that is comprised of 20 members (students) with email addresses outside our organisation. I have sent this list to others in my workteam (Lecturers) and they have added the list to their own contacts group - we
share this list as we all email the same students for different reasons.
My issue arises when a student needs to be deleted from the distribution list and I am the first person to find out about it. Ideally, I would like to take the student off and have this distribution list automatically update for the other lecturers instead
of having to re-send the list to them after it has been edited. As it stands at the moment, each lecturer has to go into the distribution list I originally sent to them to delete the student.
There has to be an easier way to sync the changes that each lecturer makes to this list.
Any ideas?
Thanks in advance
Sharyn

You can place the group in a shared Contacts folder so everyone will see the same group.
Depending on your Exchange infrastructure and working habits, this could be a folder in your mailbox, a Public Folder, Shared Mailbox or even a SharePoint List.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Not able to debug Provider Hosted App in local (Deployed in Azure and Hosted in Office 365)

I have Provider Hosted App - Deployed in Azure and Hosted in Office 365.
Deployed successfully on azure after attaching publishing profile of azure.
Now I wish to debug app in local?

Hi,
According to your post, my understanding is that you want to debug SharePoint provider hosted app in local.
Per the previous thread, to debug SharePoint provider hosted app in local, we should configure S2S authentication.
You can follow the article below to build the high trust app, then you can debug the app locally.
http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Creating Distribution Lists for Email

I have just migrated from BB. I was able to create distribution lists on the BB and have several in my Outlook. When I sync'd my new iPhone these lists did not get on my iPhone. Is there a way to either create distribution lists or have I missed something?
Thank you in advance.

No, you haven't missed anything. There is a 3rd party app called ContactTap that will let you e-mail an entire Contact Group, it was free last week.
Alternatively, you can create groups and then store them as a single contact if you follow the instructions here:
http://red66.com/2009/07/how-to-send-group-emails-from-your-iphone/

I want to know how to setup password expiry notification for outlook 2013 and 2010 in office 365

On cloud mailbox non federated how set password expiry notification for all users which is created on cloud for accepted domain mail box only configure outlook,
any other option on exchange admin center for the same,
I want to know how to setup Outlook 2013 and 2010 to receive PASSWORD EXPIRY NOTIFICATION without log in domain,

Hi
As per the information and details provided by you, to set up password expiry notification, please follow these steps: -
I suggest you run Office 365 desktop apps reffering to the steps below: -
Step1: - Login to Office 365 Portals.
Step 2: - In the right pane, click
Downloads under Resources.
Step 3: - Click Set up under
Set up and configure your Office desktop apps.
Moreover, please confirm the password policy by the
PowerShell cmdlet.
Step 1: - Install Micrsoft Online Services Module and connect to Office 365.
Step 2: - Run Connect-Msolservice command.
Step 3: - Get a password policy by the following PowerShell cmdlet:
Get-MsolPasswordPolicy –DomainName yourdomain.com
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy

How to create distribution list in workflow? for sending mail or work-item

Hi,
How to create distribution list in workflow? for sending mail or work-item to multiple users.
Regards,
Surjith

Hi Surjith,
A.Working with Distribution Lists Creating a Distribution List.
1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
2.Then click on the distribution list in Businees Workplace.
say create Name = WF_Vliste
folder Name = WF_distributor
3.distribution list content tab
Enter Recipient (SAP User ID)
B.Wrkflow Builder
Find out the dialig step in which u want to use distribution list
Use workflow Rule 30000012 (SWX_READ_DLI).
Maintain the binding from workflow container to rule container.
Just pass the name of the distribution list from WF to Rule container.
Regards
Sagar S

Feature that automatically creates a list and columns

Hi,
I wanted to create a feature that automatically creates a list and columns programatically. Can anyone please help me how to implement this.
Regards,
Praveen

Please check below article to create columns and list programatically
http://www.sharepointdoug.com/2012/12/programmatically-creating-content-type.html
similar thread below to create list programatically
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82a8fd-052c-4d24-bfef-3ff59986b29c/how-to-create-custom-list-in-sharepoint-2010-programmatically-?forum=sharepointdevelopmentprevious
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Creating Distribution List in CRM 2007

Hiya
Could somebody please help, is there a way to create Distribution List in CRM for a list of emails, contact from the contacts list.
Thanks in anticipation.
Regards
Ranjeet

Hello Ranjeet
Transaction code SO23
X Shared distribution lists
Name : ZXXXX
Title : XXXXX Mail Distribution
Don't enter anything in the Folder field.
Folder : Click the down arrow
Next screen :
Folder Name : ZXXXX
Folder Title : Mailing address
Folder Area : Shared
Click Create Folder
Next screen :
Indexing : Tick
Specify the 'Retention period of a document in this folder (days)'.
Choose the 'Folder access authorization'.
Finish, click the Enter button.
Click the tabstrips 'Distri. list content' to type in your mailing list.
Save your entries.
Finally, test it by sending a mail via the distribution list ZXXXX.
Regards
Shikha

Need assistance creating applications with superseedence to uninstall Office 2010, Lync 2010 and then install Office 365 click to run 2013

We are getting ready in a few months to uninstall our locally installed Office 2010 and head to the cloud with Office 365 2013. I have created applications to uninstall Office 2010 and Lync 2010 and then added them to the supersedence tab for Office 365
office 2013 click to run with appv5.
When deploying the office 365 2013 application it does not uninstall office 2010 or lync 2010 with the supersedence. I am able to manually uninstall Office 2010 and Lync 2010 with the command lines I am using in the applications.
The application uninstall for Office 2010 is:
The application uninstall is an exe so I created an application, created a deployment type with the location of our Office 2010 admin point, installation program and uninstall program are set with the same line as I have tried to deploy it separately and
also as a supersedence in the Office 365 application setup.exe /uninstall ProPlus /config "\\sccmserver\share\Office2010\ProPlus.ww\silentuninstallconfig.xml. The silentuninstallconfig.xml was created from the original config.xml file and edited
to these settings:<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="NO" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="Reboot" Value="Never" />
<Setting Id="SETUP_REBOOT" Value="NEVER" />
<OptionState Id="ProductFiles" State="Local" Children="force" />
</Configuration>
The detection method is the folder path to see that office 14 exists. When I deploy this the machines finish with success showing this exists, but does not uninstall Office 2010.
running the command line manually mapped to this location on a machine uninstalls office 2010 without issue.
Lync 2010 uninstall:
Lync is an exe so I am using the LyncSetup.exe /silent /uninstall. The application is in the supersedence tab for Office 365 2013. This never installs. If I create a softare distribution and deploy it on its own it uninstalls without issue.
We are going to use Lync 2013 with our office 365 2013 installation so we need to uninstall this. The detection method for lync is file system folder and the Microsoft lync folder for detection.
MS Office 15 (Office 365) was created with the click to run tool. I can install this with the application I created using the appv5 package created with the click to run tool. The issue is we need Office 2010 and Lync 2010 uninstalled first.
Having both versions of Office installed in test has caused issues where Office 15 365 will not list in add and remove programs and cannot be uninstalled even with the fix it article to remove office 2013.
I have looked at many articles and so far it is not working for us. Any help appreciated to get us to the cloud.
Thanks,
Brit

The applications I have for uninstall of office 2010 and Lync 2010 for some reason do not uninstall. Manually testing the command lines they do. The detection method seems to be hanging things up. On the lync uninstall detection method I have
the setting type of file system, type folder, path c:\program files\ folder name Microsoft Lync.
I highly recommend using something other than a file/folder "exists" detection method. Installers are constantly leaving things behind due to environmental inconsistencies. It may leave files/folders behind with a schedule to delete files on next reboot.
These things are unpredictable and very hard to use. I just use the "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall" Registry location. There you can actually key off the "Product Version" DWORD as well which gives you an even more accurate method
to determine if the application you are trying to deploy (or expect to exist) is truly there. This, of course, being if you are not using an MSI. If you have MSI technology ALWAYS use the product code unless the person writing the MSI chooses to use the same
product code for every version release of their product. In which case, Use the registry method.
As far as getting the supersedence and everything working. You need to start from the basics. Create Applications for all of the apps you want to remove. Make sure they install and uninstall properly (seems like overkill but it isn't that hard). Once you
have working install/uninstall applications then you can easily apply supersedence to your new applications with a setting of Uninstall on the superseded apps you should have no problem getting rid of them. I have done this for numerous things.
For example, I did this with Cisco Jabber to replace older versions of jabber, older versions of cisco unified personal communicator and lync and OSC. All of these replaced versions had to have an Application but once it was in it took two seconds to apply
all the supersedence rules and now I know when I push that software out no matter version is running on any machine it will pull all the old apps off and put the new one on.
Dustin Estes - MCP | www.dustinestes.com

Creating a new address list for Exchange Online (Office 365) by two parameters

Good day!
I need to create two new address list in Exchange Online 2013 (Office 365) that users will choose the two parameters.
Address sheet1: No staff
Address Sheet2: Staff
Parameters address sheet not staff:
Parameter 1: Company
It must match the value - MyCompany
Parameter 2: job title
it must be different from the value - Staff
Parameters address sheet Staff:
Parameter 1: Company
It must match the value - MyCompany
Parameter 2: job title
It must match the value - Staff
Problems:
1) Is it possible to filter user mailboxes on the parameter of discrepancy?
2) Can not find the parameter values for the script field job title
https://technet.microsoft.com/ru-ru/library/aa996912%28v=exchg.150%29.aspx
https://technet.microsoft.com/en-us/library/bb738157%28v=exchg.150%29.aspx
While on the side of 365 in the user properties such parameter is:
http://joxi.ru/MAj0Jj7hGyDbme
Company option too.

I got to build a team that I need (describes the necessary conditions)
and successfully held in PS 4.0 after connecting to the office 365:
1) Set-ExecutionPolicy unrestricted
2) $ UserCredential = Get-Credential
(Data Entry Administrator 365)
3) $ Session = New-PSSession -ConfigurationName
Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -Credential $ UserCredential -Authentication Basic -AllowRedirection
Import-PSSession $ Session
4)
PS C:\Windows\system32> New-AddressList -Name 'TEST1234' -RecipientFilter {((RecipientType -eq 'UserMailbox') -and ((Com
pany -eq 'Company1') -and (Title -ne 'Student')))}
Name DisplayName RecipientFilter
TEST1234 TEST1234 ((RecipientType -eq 'UserMailbox')
-and (((Company -eq 'Company1...
As a result, the new address list TEST1234 immediately appears. (When creating a new letter in the menu "To"), but on the inside
it is empty (although there is 1 user which is fully consistent with those described in the filter conditions.).
= (
Tried a simple version:
Office365
не отображается в адресном списке.">The same thing - the only user with such parameters in AD -> Office365 is not displayed in the address list.
(After running for a list TEST123 more than two days)
Tell me what could be the problem?

How to send mail to distribution list and another table list

Hi
I am facing a problem. I need to send mail to the user who is creating the SO/PO and a distribution list.
Problem is only one thing can be used at the same time. ie either Distribution list or list from internal table.
How can we use both in 1 function module. Like it should call the internal table and then the distribution list for sending the mail .
Regards,
Varun

Hi,
Refer to following link,
http://www.sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
http://www.sap-img.com/fu016.htm
Reward pts. if helpfull.
Regards,
Dhan

Subscription and volume licensed Office 365 C2R App-V packages on the same computer

I'm interested if anyone has come across a similar scenario to what we have at the organisation I am currently working for. The organisation has signed up for an E3 subscription to Office 365, however would like to continue to using their volume licenses
of Visio and Project 2013 (at least until new versions are released at which point they'll likely move to the same subscription model).
Using the Office Deployment Tool, I've created App-V 5.0 SP2 packages for
a. "O365ProPlusRetail"
b. "ProjectProVolume" and "VisioProVolume"
Both App-V packages ignore any exclusion rules in the configuration.xml file I've defined. This is expected and I can control which applications are published using Config Mgr 2012 R2. Both packages deploy and run as I would expect.
The issue I specifically have is that if I publish both App-V packages (using different package ID's) to the same PC with modified DeploymentConfig.xml files:
a. "O365ProPlusRetail" package only enables Word, Outlook and Excel (subscription licensing)
b. "ProjectProVolume/VisioProVolume" package only enables Visio and Project (volume licensed)
it appears as though the Word, Excel and Outlook from (b) are utilised instead of from (a) even though they are specifically disabled. This means that Word, Excel and Outlook activate to our local KMS server, rather than using the user credentials as we would
prefer.
To confirm I can see that package (a) is already running when I run the following command: Get-AppvClientPackage | select Name, InUse, InUseByCurrentUser
Name
InUse                                InUseByCurrentUser
Microsoft Office 15 ProjectProRetail_O365ProPl...
True
True
Microsoft Office 15 VisioProVolume_ProPlusVolu...
False
False
If I then open Word (which should only be enabled in the first package), I see that the second package is now in use
Name
InUse                                InUseByCurrentUser
Microsoft Office 15 ProjectProRetail_O365ProPl...
True
True
Microsoft Office 15 VisioProVolume_ProPlusVolu...
True
True
I've also confirmed that all the applications (besides Visio and Project) are disabled in the second package:
Name
EnabledGlobally
Database Compare 2013
False
Spreadsheet Compare 2013
False
Excel 2013
False
OneDrive for Business 2013
False
InfoPath Filler 2013
False
Lync 2013
False
Access 2013
False
Telemetry Log for Office 2013
False
Telemetry Dashboard for Office 2013
False
Office 2013 Upload Center
False
Publisher 2013
False
Lync Recording Manager
False
Microsoft Outlook Mobile Service
False
OneNote 2013
False
Send to OneNote 2013
False
Organization Chart Add-in for Microsoft Office programs
False
Outlook 2013
False
PowerPoint 2013
False
Microsoft Office 2013
False
Office 2013 Language Preferences
False
SharePoint Designer 2013
False
Visio 2013
True
Project 2013
True
Word 2013
False
Office XML Handler
False
Internet Explorer
False
Notepad
False
Perhaps what I am trying to do is unsupported but I can't find anything explicity calling this out - and surely other organisations will have a similar scenario to us. Is there any best practice recommendations from Microsoft in this regard?
Cheers, Tim

here is some reference, hope it's helpful.
http://support.microsoft.com/kb/2915745
http://technet.microsoft.com/en-us/library/jj219422(v=office.15).aspx
http://technet.microsoft.com/en-us/library/hh852466.aspx

Creating Distribution List and Member in Office 365

Similar Messages

Maybe you are looking for