Creating dynamic sized arrays and filling them automatically on speedy 33

hi all,
I am trying to create dynamic sized arrays on Speedy-33. Specifically, depending on the user input, I want to be able to create
arrays with 128 or 256 elements and fill them automatically. However,
array constant element is fixed for Speedy 33; thus I have to manually set the
size of the array with the mouse and enter the values in to the array by
myself. I want to make this tedious process automatic. Would this be possible? thanks so much for comments!
~casiopea

Casiopea,
There is a really great article on using arrays with LabVIEW DSC which can be found here:
How Can I Be Successful With Arrays In the LabVIEW DSP Module?
One of the biggest things that should be noted about DSP is that there is no dynamic memory allocation. Your array size must be fixed, and thus, your array needs to be initialized by using a constant.
An easy way to initialize an array constant that has many elements that are all the same is to simply create a numeric constant that has the value that you want. Then, create a new blank array constant and drag the numeric into it. In the index input for the array constant, type in the index of the last element that you want to be initialized. Then type in the value in the element that is displayed and all of the elements before it will be initialized to the default value of the numeric constant that you dropped into the array constant. I hope this helps. I would really recommend reading through that article, as it has a lot of great information about using arrays with DSC.
Brian Coalson
Software Engineer
National Instruments

Similar Messages

Creating dynamic EntityObject, ViewObject and wire them to UI components

hi experts,
Good morning to all :)
here i h'd a problem in real time (while on customization).
My problem: goes here
Re-drawing UI
ok.i through this link
http://jobinesh.blogspot.in/2010/06/model-driven-approach-for-building.html
jobinesh project is fine.
but i h'd a doubt in that project(my doubt goes At end of the thread).
Basis on the real time requirement what I did means?.
i added a new field(SNO) in db. in am just a new created field in am(as select statement).
jobinesh codes in am
    private String getQuery(String viewName) {
        String query = "";
        if (DEPT.equals(viewName)) {
            query = "SELECT Departments.DEPARTMENT_ID, \n" +
                    "       Departments.DEPARTMENT_NAME, \n" +
                    "       Departments.MANAGER_ID, \n" +
                    "       Departments.LOCATION_ID\n" +
                    "FROM DEPARTMENTS Departments";
        } else {
            query = "SELECT Employees.EMPLOYEE_ID, \n" +
                    "       Employees.FIRST_NAME, \n" +
                    "       Employees.LAST_NAME, \n" +
                    "       Employees.EMAIL, \n" +
                    "       Employees.PHONE_NUMBER, \n" +
                    "       Employees.HIRE_DATE, \n" +
                    "       Employees.JOB_ID, \n" +
                    "       Employees.SALARY, \n" +
                    "       Employees.COMMISSION_PCT, \n" +
                    "       Employees.MANAGER_ID, \n" +
                    "       Employees.DEPARTMENT_ID\n" +
                    "FROM EMPLOYEES Employees";
        return query;
    }i added new field in db. say SNo
so i modify the code as follows
    private String getQuery(String viewName) {
        String query = "";
        if (DEPT.equals(viewName)) {
            query = "SELECT Departments.DEPARTMENT_ID, \n" +
                    "       Departments.DEPARTMENT_NAME, \n" +
                    "       Departments.MANAGER_ID, \n" +
                    "       Departments.LOCATION_ID\n" +
                    "FROM DEPARTMENTS Departments";
        } else {
            query = "SELECT Employees.EMPLOYEE_ID, \n" +
                    "       Employees.FIRST_NAME, \n" +
                    "       Employees.LAST_NAME, \n" +
                    "       Employees.EMAIL, \n" +
                    "       Employees.PHONE_NUMBER, \n" +
                    "       Employees.HIRE_DATE, \n" +
                    "       Employees.JOB_ID, \n" +
                    "       Employees.SALARY, \n" +
                    "       Employees.COMMISSION_PCT, \n" +
                    "       Employees.MANAGER_ID, \n" +
                    "       Employees.DEPARTMENT_ID,\n" +
                    "       Employees.SNO\n" +
                    "FROM EMPLOYEES Employees";
        return query;
    }that field is rendering in the dynamic ui.
here the doubt is:
1.*how can i added lov for sno*. why am asking means that field is not in vo only in db. just am field add in select statement. if am wrong correct me.
2.Coming Dynamic UI. Jobinesh shows some readonly dynamic af: table. I need some editable i have to perform CRUD operation and transaction is it possible.

ADF7,
this all looks really complicated. Do you really need the ui that dynamic?
If yes, you'll need to pay the price for it. Price for you is that you don't get much help here as nobody has the time to work through all of this (if she/he isn't doing this already).
I try to point out some things without knwoing the detail:
Q1: I don't understand your question. As you added the new attribute to the query it should be part of the resulting VO (that what dynamic VO is about).
Q2: Jobinesh showed the solution in use case 3. It's more work and you might run in trouble on the way (read the comments...), but this look like the way to go.
Timo

Live paint vs. just selecting shapes and filling them

I traced an image in cs5 and am not quite sure what the benefit of using live paint to fill shapes with color with the live paint bucket over selecting the shapes and filling them the traditional way. Besides being able to fill shapes with gaps, what is the benefit of live paint?

function(){return A.apply(null,[this].concat($A(arguments)))}
not quite sure what the benefit of using live paint
The benefit of a "flood fill" tool in a vector program is that it can be used to create filled paths corresponding to shapes which only appear to be defined, but are not actually otherwise fillable paths.
For example: Get the Line Tool. Draw four paths in the form of a tic-tac-toe diagram. Now suppose you want to fill that middle "square" with a color.
But there is no actual square to which you can apply a fill. There exists only four open paths. The "square" is just the visual bounds of the intersections of the four open paths. A flood fill tool creates the necessary path and applies a fill to it.
Illustrator's specific flood-fill tool is the so-called Live Paint feature. It's called "live" because it is implemented as a "live effect." That is, the paths it creates automatically are not "nailed down" until the effect is "expanded." That is, the effect gets automatically re-run and re-drawn each time you modify the path(s) to which it is applied. That's why the program has to mark the set of associated paths as a special kind of object that exists just for the benefit of the feature: A "Live Paint Group."
JET

Is it legal to create packaged APEX applications and sell them?

Is it legal to create packaged APEX applications and sell them to Oracle DB licensed clients?
A.

No licensing applies to any environment where you have a live database. The exception is that you can try a product without license, but as soon as development of a product of developing/testing of an in-house solution is done, you need to be licensed. Being a partner changes this slightly assuming all parties involved are partners (one sigle tester from the outside shifts it back to full license mode).
Another situation where license is not needed is to use XE for which no license is required.
Yet one more way to have al low cost is to use Amazon AWS to set up an image with an included license. The cost per hour is really low so it may be a good model to not have to pay everything upfront.
You can also reduce license cost by using named user licensing in development assuming there are few people who ned to access the database. Though there are minimums of number of named user licenses you can have depending on edition of the database.
Overall, knowing your licensing requirements is key. The defense "We didn't know" has been tried before and has not proven to help at all. The cost of an audit will often be a CLM for the person responsible to pay the licenses.

Problems creating an array and mixing them up

I am trying to create an array (1-35), mix that array and display the results with a trace. I am getting an error withthe following code.
public function generateArray(toNumber : int) : Array {
 var result : Array = [];
 for (var i : int = toNumber; i != 0; i--) {
 result.push(i);
 return result;
 public function shuffle (a:Array,i:int):Array
 {var rndm:int;
 var b:Array = a.slice();
 var c:Array = [];
 while (i) {
 rndm = Math.random() * b.length;
 c.push(b.splice(rndm,1)[0]);
 i--;
 return c;
 /*limit question display to 35*/
 generateArray(35);
 trace(generateArrays);
the error(s) are:
1180: Call to a possibly undefined method generateArray.
1120: Access of undefined property generateArrays.
please assist with resolving these problems.
thanks in advance!

generateArray(35) and that trace() must be inside a method (or methods). for example,
 internal class Mixer {
 //retains the array that is consulted for random question numbers
 private var randomizedOrder:Array;
 //CONSTRUCTOR - passed total number of questions in section
 public function Mixer (questnsTotal:Number) {
 randomizedOrder = new Array();
 randomizedOrder[0] = Math.floor(Math.random()*questnsTotal);
 for (var i:Number=1; i<questnsTotal; i++) {
 randomizedOrder[i] = newNumber(questnsTotal, i);
 for (var k:Number=0; k<questnsTotal; k++) {
 trace(""+k+": "+randomizedOrder[k]);
/*limit question display to 35*/
 generateArray(35);
 trace(generateArray);
 //recursive function that creates a new number until it creates one that isn't already in use
 private function newNumber (qTotal:Number, curNum:Number):Number {
 var newNum:Number = Math.floor(Math.random()*qTotal);
 for (var j:Number=0; j<curNum; j++) {
 if (randomizedOrder[j] == newNum) {
 return newNumber(qTotal, curNum);
 return newNum;
 public function generateArray(toNumber : int) : Array {
 var result : Array = [];
 for (var i : int = toNumber; i != 0; i--) {
 result.push(i);
 return result;
 public function shuffle (a:Array,i:int):Array
 {var rndm:int;
 var b:Array = a.slice();
 var c:Array = [];
 while (i) {
 rndm = Math.random() * b.length;
 c.push(b.splice(rndm,1)[0]);
 i--;
 return c;
 //This is how external classes acquire a random number from this class's array
 //(programNum = the question the program wants to ask next, based on sequential order, or user selection)
 internal function getRandomNumber(programNum:Number):Number {
 return randomizedOrder[programNum];

How to create dynamic View Object and Dynamic Table

Dear ll
I want to create a dynamic view object and display the output in a dynamic table on the page.
I am using Jdeveloper 12c "Studio Edition Version 12.1.2.0.0"
This what I did:
1- I created a read only view object with this query "Select sysdate from dual"
2- I added this View object to the application module
3- I created a new method that change the query of this View object at runtime
 public void changeVoQuery(String dbViewName) {
 String sqlstm = "Select * From " + dbViewName;
 ViewObject dynamicVo = this.findViewObject("DynamicVo");
 if (dynamicVo != null) {
 dynamicVo.remove();
 dynamicVo = this.createViewObjectFromQueryStmt("DynamicVo", sqlstm);
 dynamicVo.executeQuery();
4- I run the application module for testing the method and I passed "Scott.Emp" as a parameter and the result was Success
5- Now I want to show the result of the view on the page, so I draged and dropped the method from the data control as a parameter form
6- I dragged and dropped the view Object "DynamicVo" as a table and I choose "generate Column Dynamically at runtime". This is the page source
<af:panelHeader text="#{viewcontrollerBundle.SELECT_DOCUMTN_TYPE}" id="ph1">
 <af:panelFormLayout id="pfl1">
 <af:inputText value="#{bindings.dbViewName.inputValue}" label="#{bindings.dbViewName.hints.label}"
 required="#{bindings.dbViewName.hints.mandatory}"
 columns="#{bindings.dbViewName.hints.displayWidth}"
 maximumLength="#{bindings.dbViewName.hints.precision}"
 shortDesc="#{bindings.dbViewName.hints.tooltip}" id="it1">
 <f:validator binding="#{bindings.dbViewName.validator}"/>
 </af:inputText>
 <af:button actionListener="#{bindings.changeVoQuery.execute}" text="changeVoQuery"
 disabled="#{!bindings.changeVoQuery.enabled}" id="b1"/>
 </af:panelFormLayout>
 </af:panelHeader>
 <af:table value="#{bindings.DynamicVo.collectionModel}" var="row" rows="#{bindings.DynamicVo.rangeSize}"
 emptyText="#{bindings.DynamicVo.viewable ? 'No data to display.' : 'Access Denied.'}"
 rowBandingInterval="0" selectedRowKeys="#{bindings.DynamicVo.collectionModel.selectedRow}"
 selectionListener="#{bindings.DynamicVo.collectionModel.makeCurrent}" rowSelection="single"
 fetchSize="#{bindings.DynamicVo.rangeSize}" filterModel="#{bindings.DynamicVoQuery.queryDescriptor}"
 queryListener="#{bindings.DynamicVoQuery.processQuery}" filterVisible="true" varStatus="vs" id="t1"
 partialTriggers="::b1">
 <af:iterator id="i1" value="#{bindings.DynamicVo.attributesModel.attributes}" var="column">
 <af:column headerText="#{column.label}" sortProperty="#{column.name}" sortable="true" filterable="true"
 id="c1">
 <af:dynamicComponent id="d1" attributeModel="#{column}"
 value="#{row.bindings[column.name].inputValue}"/>
 </af:column>
 </af:iterator>
 </af:table>
when I run the page this error is occured
<Nov 13, 2013 2:51:58 PM AST> <Error> <oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #1
javax.el.ELException: java.lang.NullPointerException
Caused By: java.lang.NullPointerException
Can any body help me please
thanks

Have you seen Shay's video https://blogs.oracle.com/shay/entry/adf_faces_dynamic_tags_-_for_a
All you have to do is to use the dynamic table to get your result.
Timo

Creating dynamic buttons with pictures on them

Hi there,
What is the procedure for doing so?
I need to create 5 buttons which looks the same, and each one of them has a picture on it.
I'm new to Flash/Action Script.
I created a button symbol, named it and created linkage to AS.
I also created a MovieClip that holds the picture I want to put on top of the button and created a linkage.
Then in the code I create two instances and display them
This is the code:
public function setBBWBtnProp(btn:btnChoose, tmb:MovieClip, idx:int)
     btn.height = 120;
     btn.width = 120;
     btn.x = 20;
     btn.y = 15 + 140 * idx;
     tmb.x = btn.x + 5;
     tmb.y = btn.y + 5;
var btn1:btnChoose = new btnChoose();
var tmb1:mvBBW02Thumb = new mvBBW02Thumb();
setBBWBtnProp(btn1, tmb1, 0);
ph.addChild(btn1);
ph.addChild(tmb1);
Now, it works but the movieclip blocks the button...
Any idea how to do it correctly...

I'm only an intermediate scripter, but in my experience it seems like it's a mistake to mix coding with buttons. Instead use a movie clip and assign listeners to it.
look up functions like the onese I use below
actorButton is my movie clip
private function registerMyButton(){
            actorButton.buttonMode = true;
            actorButton.addEventListener(MouseEvent.CLICK, reportClick);
function reportClick(event:MouseEvent):void{
            var thisPage = myImgData.web_page_str;
            var targetURL:URLRequest = new URLRequest(thisPage);
            navigateToURL(targetURL, "_self");
hope that helps
...gregory

Create a Z-table and fill it with value and transport everything

Hi
I would like to create a Z-table, fill it with values and then transport everything.
This table will not be updated in the productions system.
Delivery class = C Customizing table, maintenance only by cust., not SAP import
Data Browser/table view maint = Display/maintenance allowed
Field: MANDT, etc. etc.
Technical settings: Data class = APPL1, Size = 0, Buffering switched on, Fully buffered.
I also create the Table maintenance generator
When I fill my table with values, these will not be saved in my change request.
What I'm doing wrong?
Thanks // Peter B

Go to
se11>utilities>table maintenance generator-->there u fill
Fungroup group (inthe function group u give any a z name related to ur table name it create automatically)
package
maintenance screen type and screen name
After this save and activate.
Then goto
Utilities>TABLE CONTENTS>CREATE ENTERIES

Is it possible to Create dynamic outbound plug and it's navigation link?

Hi,
i am trying to create an outbound plug in runtime dynamically, is it possible?
I have found out how to create the outbound plug in wdDoModifyView: "view.getViewInfo().createOutboundPlug()"
but the problem is how do i set the plug name, and how do i create it's navigation link to bind him to an inbound plug in another view.
Thanks,
Carmit

Hi Carmit,
the following code snippet creates a link between a newly created outbound plug (outbound plug name is not really necessary) and an already existing inbound plug:
/* targetViewInfo is the IWDAbstractViewInfo of navigation target
srcViewInfo is the IWDAbstractViewInfo of navigation source
Find inbound plug, must exist */
IWDInboundPlugInfo targetPlug = targetViewInfo.findInInboundPlugs(inboundPlugName);
/* Create outbound plug with "automatic" name */
IWDOutboundPlugInfo srcPlug = srcViewInfo.createOutboundPlug();
/* Create link from out to in */
IWDNavigationTargetReferenceInfo targetReferenceInfo =
srcViewUsage.createNavigationTarget(srcPlug.getName(), targetViewUsage, targetPlug.getName());
/* Fire srcPlug somewhere...*/
Hope that helps.
Regards
Stefan

To create Sale Order , Delivery and then Billing Automatically .

hi all ,
I want to create a program which will create SALES ORDER , then make DELIVERY of it and then BILLING .
Also i want to restrict the sale order to be create of those CUSTOMER whose credit limit is exceed , which is maintain in FD32 tcode .
If i go with BDC for Sales order it creates the sales order with a warning message , which i dont want .
Is there any BAPI for doing this ?
I do have try to find out the customer whose credit limit are exceed so as to restrict them in Program itself , but do not find the table for credit exposure to compare it with credit limit .
Please give me your Suggestion .
Secondly , Which BAPI is suitable for DELIVERY and BILLING in 4.7 version .
Thanks .

Hi,
Check these below BAPI's
BAPI_SALESDOCU_CREATEFROMDATA
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_OUTB_DELIVERY_CREATE_SLS Generates Delivery for Customer Order
BAPI_BILLINGDOC_CREATE Custimer Individual Billing Document : Create Billing Document
BAPI_BILLINGDOC_CREATEFROMDATA Create Customer Individual Billing Doc.
Regards,
Jyothi CH.

How 2 create dynamic internal table and can we pass it to gui_download FM

HI all,
 How can we create a dynamic internal table?
I have a requirement where i have to create an internal table with the no. of fields depending on the selection screen values, i think tat can be possible though dynamic creation only.
 How to solve this issue..?Pointers will be very much useful..
Thanks
Sunny.

hi
Follow the code it will help you out....
REPORT YUSMM_TEXT2 .
*TABLES
TABLES: MARA, " General Material Data
 MAKT, " Material Descriptions
 T002. " Language Keys
* GLOBAL TYPE-POOL
TYPE-POOLS : SLIS.
* GLOBAL TYPES
TYPES: BEGIN OF TP_LANG ,
 SPRAS LIKE T002-SPRAS,
 LAISO LIKE T002-LAISO,
 SRNO(3) TYPE N,
 END OF TP_LANG.
TYPES: BEGIN OF TP_MATNR,
 MATNR LIKE MARA-MATNR,
 BEGRU LIKE MARA-BEGRU,
 END OF TP_MATNR.
* DECLARATION FOR GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA:GT_MAKT TYPE STANDARD TABLE OF MAKT, "Materialkurztexte,
 GT_THEAD TYPE STANDARD TABLE OF THEAD, "SAPscript: Text-Header,
 GT_LINETAB TYPE STANDARD TABLE OF TLINE, "SAPscript: Text-Zeilen,
 GT_T002 TYPE STANDARD TABLE OF T002. "Language key
DATA: BEGIN OF GV_TEXT_OUTPUT_LINE,
 MATNR LIKE MARA-MATNR,
 BEGRU LIKE MARA-BEGRU,
 MAKTX LIKE MAKT-MAKTX,
 LTXT40(1250) TYPE C,
 SRNO(3) TYPE N,
 SPRAS LIKE T002-SPRAS,
 END OF GV_TEXT_OUTPUT_LINE.
DATA: GT_MATNR TYPE STANDARD TABLE OF TP_MATNR,
 WA_GT_MATNR TYPE TP_MATNR.
DATA: GT_LANG TYPE STANDARD TABLE OF TP_LANG,
 WA_GT_LANG TYPE TP_LANG.
DATA: GT_TEXT_OUTPUT_LINE LIKE STANDARD TABLE OF GV_TEXT_OUTPUT_LINE,
 GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 GV_FIELDCAT LIKE LINE OF GT_FIELDCAT,
 CT_GT_FIELDCAT_IN LIKE GV_FIELDCAT,
 GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
 GV_REPID TYPE SY-REPID.
DATA: BEGIN OF GV,
 FORMER_ERROR LIKE SY-MARKY, " Fehlermeldung bereits
 FILE_OPEN(1), " Flag open file
 REC_LENGTH TYPE I, " record length
 MATNR TYPE MARA-MATNR, " material
 REPID TYPE SYST-REPID,
 RETCO TYPE SY-SUBRC,
 END OF GV.
DATA: GV_MAKT TYPE MAKT,
 GV_T002 TYPE T002,
 GV_LANGU TYPE THEAD-TDSPRAS.
* DECLARATION FOR FIELD-SYMBOLS
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
 <FS_DATA1> TYPE REF TO DATA,
 <FS_2> TYPE STANDARD TABLE,
 <FS_22> TYPE STANDARD TABLE,
 <FS_1>,
 <FS_11>,
 <F>,
 <FA>,
 <LWA_LINE_WA>,
 <LWA_LINE_WA1>.
DATA: IT_FLDCAT TYPE LVC_T_FCAT.
DATA: T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: L_LT TYPE SLIS_LAYOUT_ALV.
DATA: WA_IT_FLDCAT TYPE LVC_S_FCAT.
DATA: WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: GP_TABLE TYPE REF TO DATA.
DATA: WA_NEWLINE TYPE REF TO DATA.
*DECLARATION FOR CONSTANTS
CONSTANTS:
 BEGIN OF GC,
 TDID_GRUN TYPE THEAD-TDID VALUE 'GRUN',
 TDOBJECT_MAT TYPE THEAD-TDOBJECT VALUE 'MATERIAL',
 ON(01) TYPE C VALUE 'X',
 YES(01) TYPE C VALUE 'X',
 TXT(25) TYPE C VALUE 'MATERIAL DETAILS',
 MAT(25) TYPE C VALUE 'MATERIAL NUMBER',
 AUT(25) TYPE C VALUE 'AUTHORIZATION GROUP',
 FOUND TYPE SY-SUBRC VALUE '00', " Return-Code
 RC_OK TYPE SY-SUBRC VALUE '00', " Return-Code
 OFF TYPE SY-SUBRC VALUE '00', " return code
 FALSE TYPE SY-SUBRC VALUE '00', " boolean
 TRUE TYPE SY-SUBRC VALUE '01', " boolean
END OF GC.
* DECLARATION FOR VARIABLES
DATA: V(3) TYPE N,
 STR TYPE STRING,
 STR1 TYPE STRING,
 V_VAR(3) TYPE N,
 V_VAR1(3) TYPE N,
 V_FIELDNAME(15) TYPE C,
 V_CHAR(15) TYPE C,
 V_LINES(3) TYPE N,
 MAKTEXT LIKE MAKT-MAKTX,
 LT_DATA TYPE REF TO DATA,
 LT_DATA1 TYPE REF TO DATA,
 LWA_LINE TYPE REF TO DATA,
 LWA_LINE1 TYPE REF TO DATA.
*SELECTION-SCREEN AND PARAMETERS
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
S_MATNR FOR MARA-MATNR, "MATERIAL NUMBER
S_MTART FOR MARA-MTART, "MATERIAL TEXT
S_LANG FOR MAKT-SPRAS. "LANGUAGE
PARAMETER: GP_SIZE TYPE I DEFAULT 200. "DATA LENGTH
SELECTION-SCREEN: END OF BLOCK A1.
* AT SELECTION SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
 MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
 MESSAGE W130(26) WITH TEXT-004.
 SET CURSOR FIELD 'gp_size'.
ENDIF.
* INITIALIZATION
INITIALIZATION.
GV-REPID = SY-REPID.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM GET_MARA_DATA
 TABLES
 GT_TEXT_OUTPUT_LINE
 USING
 S_MATNR[]
 S_MTART[]
 GP_SIZE
 CHANGING
 GV-RETCO
PERFORM GET_MAT_TEXT
 TABLES
 GT_MAKT
 GT_TEXT_OUTPUT_LINE
 GT_THEAD
 GT_LINETAB
 USING
 GC
 GV-RETCO
 CHANGING
 GV_TEXT_OUTPUT_LINE
 GV_MAKT
PERFORM GET_LANG.
PERFORM DYNAMIC_TABLES.
PERFORM POPULATE_FINAL_TABLE.
PERFORM POPULATE_DYNAMIC_TABLE.
* END-OF-SELECTION
END-OF-SELECTION.
PERFORM DATA_OUTPUT.
*& Form get_mara_data
* Materialdaten lesen
* <->ct_gt_text_output_line Ausgabetabelle
* -->it_s_matnr Parameter Materialnummer
* -->it_s_mtart Parameter Materialart
* -->if_gp_size Parameter Anzahl Materialnummern
FORM GET_MARA_DATA TABLES CT_GT_TEXT_OUTPUT_LINE STRUCTURE
 GV_TEXT_OUTPUT_LINE
 USING IT_S_MATNR LIKE S_MATNR[]
 IT_S_MTART LIKE S_MTART[]
 IF_GP_SIZE
 CHANGING IF_GV-RETCO. "#EC *
* MARA in die Übergabestruktur einlesen
SELECT MATNR BEGRU
 FROM MARA UP TO IF_GP_SIZE ROWS
 APPENDING CORRESPONDING FIELDS OF TABLE GT_MATNR
 WHERE MATNR IN IT_S_MATNR
 AND MTART IN IT_S_MTART.
IF_GV-RETCO = SY-SUBRC.
ENDFORM. " get_mara_data
*& Form get_mat_text
* Kurz- und Langtexte zum Material lesen
* <->ct_gt_makt Materialkurztexte
* <->ct_gt_text_output_line Ausgabetabelle
* <->ct_gt_thead Kopftabelle für ALV
* <->ct_gt_linetab Zeilentabelle für ALV
* -->if_gc Globale Konstanten
* <--cf_gv_text_output_line Struktur Ausgabetabelle
* <--cf_gv_makt Struktru Materialkurztexte
FORM GET_MAT_TEXT TABLES CT_GT_MAKT STRUCTURE MAKT
 CT_GT_TEXT_OUTPUT_LINE STRUCTURE
 GV_TEXT_OUTPUT_LINE
 CT_GT_THEAD STRUCTURE THEAD
 CT_GT_LINETAB STRUCTURE TLINE
 USING
 IF_GC LIKE GC
 IF_GV-RETCO
 CHANGING CF_GV_TEXT_OUTPUT_LINE LIKE
 GV_TEXT_OUTPUT_LINE
 CF_GV_MAKT LIKE GV_MAKT
DATA: STRG TYPE STRING,
 STRG1(1255) TYPE C.
IF IF_GV-RETCO = IF_GC-FOUND.
* Materialkurztexte in alles Sprachen einlesen
 SELECT * FROM MAKT APPENDING TABLE CT_GT_MAKT
 FOR ALL ENTRIES IN GT_MATNR "ct_gt_text_output_line
 WHERE MATNR = GT_MATNR-MATNR " ct_gt_text_output_line-matnr
* Kurztexte in die sprachabhängigen Felder bringen
 LOOP AT GT_MATNR INTO WA_GT_MATNR.
 LOOP AT CT_GT_MAKT INTO CF_GV_MAKT
 WHERE MATNR = WA_GT_MATNR-MATNR.
 CF_GV_TEXT_OUTPUT_LINE-MATNR = WA_GT_MATNR-MATNR.
 CF_GV_TEXT_OUTPUT_LINE-BEGRU = WA_GT_MATNR-BEGRU.
 CF_GV_TEXT_OUTPUT_LINE-MAKTX = CF_GV_MAKT-MAKTX.
 CF_GV_TEXT_OUTPUT_LINE-SPRAS = CF_GV_MAKT-SPRAS.
* LANGTEXT
 CLEAR CT_GT_THEAD[].
 CT_GT_THEAD-TDOBJECT = IF_GC-TDOBJECT_MAT.
 CT_GT_THEAD-TDNAME = WA_GT_MATNR-MATNR.
 CT_GT_THEAD-TDID = IF_GC-TDID_GRUN.
 CT_GT_THEAD-TDSPRAS = CF_GV_MAKT-SPRAS.
 CALL FUNCTION 'TEXT_READ'
 EXPORTING
 I_HEADER = CT_GT_THEAD
 I_READONLY = IF_GC-ON
 IMPORTING
 E_HEADER = CT_GT_THEAD
 TABLES
 T_LINES = CT_GT_LINETAB[]
 EXCEPTIONS
 NOTFOUND = 1.
 IF SY-SUBRC = IF_GC-FOUND.
 LOOP AT CT_GT_LINETAB.
 STRG = CT_GT_LINETAB-TDLINE.
 IF STRG1 <> ' '.
 CONCATENATE STRG1 ';' STRG INTO STRG1.
 ELSE.
 STRG1 = STRG.
 ENDIF.
 ENDLOOP.
 CF_GV_TEXT_OUTPUT_LINE-LTXT40 = STRG1.
 APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
 CLEAR CF_GV_TEXT_OUTPUT_LINE.
 STRG1 = ' '.
 ELSE.
 APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
 ENDIF.
 ENDLOOP.
 ENDLOOP.
ENDIF.
ENDFORM. " get_mat_text
*& Form data_output
* Daten mit ALV ausgeben
* <->ct_GT_FIELDCAT Feldkatalog für ALV
* <->ct_gt_text_output_line Ausgabetabelle
* -->P_GS_LAYOUT Layout für ALV
* -->if_gc Globale Konstanten
* <--cf_GV_REPID Zur Zeit aufgerufener Reportname
* <--cf_gv_fieldcat Struktur Feldkatalog
* <--cf_gv Globale Variablen
FORM DATA_OUTPUT.
PERFORM FIELDCATBUILD.
PERFORM LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = GV-REPID
 I_CALLBACK_PF_STATUS_SET = 'EVENT_SET_STATUS_01'
 I_CALLBACK_USER_COMMAND = 'EVENT_USER_COMMAND'
 IS_LAYOUT = L_LT
 IT_FIELDCAT = T_FLDCAT1[]
 TABLES
 T_OUTTAB = <FS_2>
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " data_output
*& Form fieldcatbuild
* text
* --> p1 text
* <-- p2 text
FORM FIELDCATBUILD. " TABLES ct_gt_fieldcat_in STRUCTURE gv_fieldcat.
LOOP AT IT_FLDCAT INTO WA_IT_FLDCAT.
 WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
 WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
 WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-FIELDNAME.
 APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
 CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ENDFORM. " fieldcatbuild
* Form event_set_status_01*
FORM EVENT_SET_STATUS_01 USING LT_EXCL TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ABCD' .
ENDFORM. "EVENT_SET_STATUS_01
*& Form Name: event_user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM EVENT_USER_COMMAND USING
IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
 WHEN 'DOWNLOAD'.
 PERFORM POPULATE_DOWNLOAD_TABLE.
 DATA: L_LENGHT TYPE I.
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = 'C:data.xls'
 FILETYPE = 'ASC'
 WRITE_FIELD_SEPARATOR = 'X'
 TRUNC_TRAILING_BLANKS = 'X'
 DAT_MODE = 'X'
 IMPORTING
 FILELENGTH = L_LENGHT
 TABLES
 DATA_TAB = <FS_22>.
 IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 IF L_LENGHT NE GC-FOUND.
 MESSAGE S398(00) WITH 'DATA downloaded to c:data.xls'.
 ENDIF.
ENDCASE.
ENDFORM. "event_user_command
*& Form get_lang
* text
* --> p1 text
* <-- p2 text
FORM GET_LANG.
SELECT SPRAS
 LAISO FROM T002 INTO CORRESPONDING FIELDS OF TABLE GT_LANG
 WHERE SPRAS IN S_LANG.
DESCRIBE TABLE GT_LANG LINES V_LINES.
LOOP AT GT_LANG INTO WA_GT_LANG.
 V = V + 1.
 WA_GT_LANG-SRNO = V.
 MODIFY GT_LANG FROM WA_GT_LANG TRANSPORTING SRNO.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
 CONCATENATE 'MATEDESC-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
 CLEAR WA_IT_FLDCAT.
 WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
 WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-INTLEN = 40.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO IT_FLDCAT .
 CLEAR WA_GT_LANG.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
 CONCATENATE 'BASDAT-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
 CLEAR WA_IT_FLDCAT.
 WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-INTLEN = 255.
 WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO IT_FLDCAT .
 CLEAR WA_GT_LANG.
ENDLOOP.
V_FIELDNAME = 'MATNR'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Matnr'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 1.
V_FIELDNAME = 'BEGRU'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'BEGRU'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 2.
ENDFORM. " get_lang
*& Form dynamic_tables
* text
* --> p1 text
* <-- p2 text
FORM DYNAMIC_TABLES.
ASSIGN LT_DATA TO <FS_DATA>.
* Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA> " Dynamic Internal Table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
* Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
ENDFORM. " dynamic_tables
*& Form populate_final_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_FINAL_TABLE.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
 READ TABLE GT_LANG INTO WA_GT_LANG
 WITH KEY SPRAS = GV_TEXT_OUTPUT_LINE-SPRAS.
 IF SY-SUBRC EQ GC-FOUND.
 GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
 ENDIF.
 MODIFY GT_TEXT_OUTPUT_LINE FROM GV_TEXT_OUTPUT_LINE.
ENDLOOP.
ENDFORM. " populate_final_table
*& Form populate_dynamic_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DYNAMIC_TABLE.
DATA: INDX TYPE SY-TABIX.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
 AT NEW MATNR.
 INDX = SY-TABIX.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-MATNR.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-BEGRU.
 ENDAT.
 LOOP AT GT_LANG INTO WA_GT_LANG.
 IF GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
 V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + 2.
 ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-MAKTX.
 V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
 ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-LTXT40.
 ENDIF.
 ENDLOOP.
 AT END OF MATNR.
 APPEND <LWA_LINE_WA> TO <FS_2>.
 CLEAR <LWA_LINE_WA>.
 ENDAT.
ENDLOOP.
ENDFORM. " populate_dynamic_table
*& Form LAYOUT
* text
* --> p1 text
* <-- p2 text
FORM LAYOUT.
CLEAR L_LT.
L_LT-ZEBRA = GC-YES.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = GC-TXT.
ENDFORM. " LAYOUT
*& Form populate_download_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DOWNLOAD_TABLE.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA1> " Dynamic Internal table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
* Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
DATA: STRN1 TYPE STRING,
 STRN2 TYPE STRING,
 INDX TYPE SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-MAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-AUT.
LOOP AT GT_LANG INTO WA_GT_LANG.
 V_VAR1 = WA_GT_LANG-SRNO + 2.
 CONCATENATE 'MATERIALDESCRIPTION-' WA_GT_LANG-LAISO INTO STRN1.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = STRN1.
 V_VAR1 = WA_GT_LANG-SRNO + V_LINES + 2.
 CONCATENATE 'BASICDATA-' WA_GT_LANG-LAISO INTO STRN2.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = STRN2.
ENDLOOP.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
APPEND <LWA_LINE_WA1> TO <FS_22>.
V_VAR1 = 0.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
 AT NEW MATNR.
 INDX = SY-TABIX.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = GV_TEXT_OUTPUT_LINE-MATNR.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = GV_TEXT_OUTPUT_LINE-BEGRU.
 ENDAT.
 LOOP AT GT_LANG INTO WA_GT_LANG.
 IF GV_TEXT_OUTPUT_LINE-SRNO EQ WA_GT_LANG-SRNO.
 V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + 2.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = GV_TEXT_OUTPUT_LINE-MAKTX.
 V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
* STR = GV_TEXT_OUTPUT_LINE-LTXT40.
* SEARCH STR FOR ';'.
* DO.
* IF SY-SUBRC = 0.
* SPLIT STR AT ';' INTO STR1 STR.
* <FA> = STR1.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
* SEARCH STR FOR ';'.
* CLEAR <LWA_LINE_WA1>.
* ELSE.
* EXIT.
* ENDIF.
* ENDDO.
* <FA> = STR.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
 <FA> = GV_TEXT_OUTPUT_LINE-LTXT40.
 ENDIF.
 ENDLOOP.
 AT END OF MATNR.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 CLEAR <LWA_LINE_WA1>.
 ENDAT.
ENDLOOP.
ENDFORM. " populate_download_table
thanks
Nitya

Create dll with arrays and call it

I am trying to create dll with labview in order to pass a 2d array to the main program. The problem is that I don't really know how to create the function to call it (I don't know much about pointers)
The function I have created to call the dll is void Untitled1(TD1Hdl *Array1) which is suposse to return the array created on it.
For example, in the program attached, how should I do to pass the array to another program using dlls?
Thanks a lot,
Juanlu
Attachments:
Untitled 1.vi ‏7 KB

The code you've provided doesn't do anything (just a control wired to an indicator) so I'm not sure what you're asking here.
If I understand correctly, you want to build a DLL from your LabVIEW VI. From what language will you call that DLL? There is no standard way to pass a 2-D array. If you can convert to a 1-D array, you can use a simple pointer. With a 2-D array, you're stuck with LabVIEW's array representation (the TD1Hdl type), which means that whatever code calls that function will need to understand the LabVIEW data type and how to manipulate it.

I used to be able to log into my banking website very easily because Firefox remembered my u/n and pw and filled them in, but now it doesn't. Is there a way to override this in "about:config"?

I'm trying to make it simple to log into my banking website by having Firefox automatically fill in the username and password info. But, the form input tags for the username and password have a parameter saying "autocomplete=off" which, I'm assuming, prevents Firefox from filling in the stored information. Is there a method for me to override the tag in that webpage (and others with the same problem) by a setting in "about:config" or in a universal stylesheet that makes autocomplete ON?

"Compatibility View" is a crutch for IE users, from the days when Microsoft thought they controlled the internet and had their own "standards".
You have some fixin' to do. All it might take is a tweak to the main CSS file, but it may take more than that. 
This is what the W3Org Validator service says: 
http://validator.w3.org/check?uri=http://www.turnbullfiresafety.com/
Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.

ITunes 11.1 and / or the Podcast app on iOS 7 will not allow me to create play lists in iTunes. Is there an app that will allow me to create podcast plays lists and play them on the iPhone running iOS7 ?

iOS 7 will not alow podcasts lists in the music app so we have to use the podcast app
but iTunes 11.1 and / or the Podcast app on iOS 7 will not show podcast play lists created in iTunes (well maybe it does but clicking on the podcasts app causes iTunes to freeze so can not select)
sometime some folders created in iTunes have appeared with the Podcast app but others not.
creating an on the go list in my iphone is agony - I have over 100 podcasts I have subscribed to and when creating a list you can not view by most recently downloadded podcast
AND you can't search (no search bar) so I have to scroll through to find a podcast that might have been updated - but they are not in any logocal order that I can work out (not alphbetical or date added).
Video podcasts are mixed with audio
podcasts I delete (unsubscribe to) keep coming back
its a disaster
my question is there an alternative iPhone app that works with iTunes
no I don't want an app where I have to download to the phone directly, thats 100 subscriptions I will have to make agaian

Agree about the disaster part. I haven't found a fix within iTunes.
I gave up and switched to downcast 2 days ago. Even though it was a hassle to re-subscribe to all my podcasts, im so much happier.
To make switching easier, I found that in iTunes you can "get info" on the podcast and copy the RSS address to the clipboard. Put all of these in a message note. When iCloud syncs the note to your phone, you can copy and paste the urls into downcast one at a time to subscribe.
Downcast has crashed on me occassionally when I'm subscribing to feeds, but so far it has recovered gracefully each time and no data was lost.

Creating an 3D array and exporting it to excel

I'm trying to create a spreadsheet file that will have three columns of data. So far, I've been only successful in getting two columns. I tried to look for examples but I could only find examples that had single-floating point numbers, not strings.
I've been sucessful in writing strings to an Excel worksheet, now I just need to find a way to take every other data point in the second column and give it it's own column.
To aid in solving the problem, I've attached the excel file that the VI wrote to as well as the VI itself.
Attachments:
temp ‏1 KB
DAC_and_53131_Analysis3.vi ‏92 KB

UPDATE: I have found another problem with my code. Seems like that the frequency string I'm writing is sorted by a column while the 1/2 voltage increments are in a row. I'm trying to fix it so that the frequencies would be in a row of their own. Any input would be greatly appreciated.
Attached is a sample output file of the problem.
Attachments:
Frequency_Problem.txt ‏1 KB

Creating dynamic sized arrays and filling them automatically on speedy 33

Similar Messages

Maybe you are looking for