Creating InfoObjects using program and assignment under InfoObject Catalog

Hi All,
There is a FM BAPI_IOBJ_CREATE which can create an Infoobject but the problem is it is not having provisions to get assigned to a particular " Infoobject Catalog".
Is there any other program or some way by which we can do it using the same FM.
Thanks in advance

To assign your Infoobject you must use a separate BAPI:
BAPI_IOBC_CHANGE
This function module changes an existing InfoObject catalog. Enter all the InfoObject catalog properties in the DETAILS parameter
If the Catalog doesn't exist you have another BAPI:
BAPI_IOBC_CREATE
This function module creates a new InfoObject catalog. You have to give all the InfoObject catalog properties in the DETAILS parameter
Regards,
Sergio

Similar Messages

How to create authority check object and assign to ztcode which is of modu

Dear ,
how to create authority check object and assign to ztcode which is of custom module pool program.its urgent kindly help points rewarded.

Manoj,
You can check with your Basis team to create authorisation object and assigining tcodes to the user profiles.
K.Kiran.

How to create a moveable holiday and assign it to a Holiday Calendar?

Hi Experts,
How to create a moveable holiday and assign it to a Holiday Calendar?
Regards,
Tomesh

Hi Tomesh,
Floating Holidays are created for holidays for which the dates are not decided for the years ahead or dates may changes each year or when a unusual holiday is just introducted for one year.
1.Use transaction SCAL or use the IMG path to the holiday calender.
2.Create a new holiday and select the option " is a movable holiday".
3.Fill in the " public holiday attribute tab" and hit insert date.
4.Fill in the year, month and date for the floating holiday or you could do multiple years at the same time if dates are know and hit create.
5. The new public holiday is created.
6.Assign the new holiday to the holiday calender, while saving you will get a message that " an irregular public holiday is created and being save hit ok. This message will appear in cases when the holiday calender validity and the validity of the floating holiday are matching.
Generate the work schedules and check if th holiday appear in the work schedule.
Award point if useful.
Thanks
Gita

How to create a new UoM and assigning it to characteristic?

Hi,
How to create a new UoM and assigning it to characteristic?
i want to enter cost ( in rupees and laks) against a counter
but for that counter charecteristic required and for taht charecteristic unit of measure Rs and Laks are not defined in the system.
So please help me ....

Hi,
Use T Code CUNI
Enter Unit of Measurement as RS and Text as Ruppes
Commercial and Technical Display is same as RS
Numerator is 1
Denominator 1
Exponent 0
Save
Thanks
Raj

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?
Hi,
I do generate XML-Files by using DBMS_XMLGEN with output by UTL_FILE
but it seems, the xml-Datafile I get on end is not really UTF-8 encoding
( f.ex. cannot verifying it correct in xmlspy )
my dbms is
NLS_CHARACTERSET          = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET     = AL16UTF16
NLS_RDBMS_VERSION     = 10.2.0.1.0
I do generate it in this matter :
declare
xmldoc CLOB;
ctx number ;
utl_file.file_type;
begin
-- generate fom xml-view :
ctx := DBMS_XMLGEN.newContext('select xml from xml_View');
DBMS_XMLGEN.setRowSetTag(ctx, null);
DBMS_XMLGEN.setRowTag(ctx, null );
DBMS_XMLGEN.SETCONVERTSPECIALCHARS(ctx,TRUE);
-- create xml-file:
xmldoc := DBMS_XMLGEN.getXML(ctx);
-- put data to host-file:
vblob_len := DBMS_LOB.getlength(xmldoc);
DBMS_LOB.READ (xmldoc, vblob_len, 1, vBuffer);
bHandle := utl_file.fopen(vPATH,vFileName,'W',32767);
UTL_FILE.put_line(bHandle, vbuffer, FALSE);
UTL_FILE.fclose(bHandle);
end ;
maybe while work UTL_FILE there is a change the encoding ?
How can this solved ?
Thank you
Norbert
Edited by: astramare on Feb 11, 2009 12:39 PM with database charsets

Marco,
I tryed to work with dbms_xslprocessor.clob2file,
that works good,
but what is in this matter with encoding UTF-8 ?
in my understandig, the xmltyp created should be UTF8 (16),
but when open the xml-file in xmlSpy as UTF-8,
it is not well ( german caracter like Ä, Ö .. ):
my dbms is
NLS_CHARACTERSET = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET = AL16UTF16
NLS_RDBMS_VERSION = 10.2.0.1.0
-- test:
create table nh_test ( s0 number, s1 varchar2(20) ) ;
insert into nh_test (select 1,'hallo' from dual );
insert into nh_test (select 2,'straße' from dual );
insert into nh_test (select 3,'mäckie' from dual );
insert into nh_test (select 4,'euro_€' from dual );
commit;
select * from nh_test ;
S0     S1
1     hallo
1     hallo
2     straße
3     mäckie
4     euro_€
declare
rc sys_refcursor;
begin
open rc FOR SELECT * FROM ( SELECT s0,s1 from nh_test );
dbms_xslprocessor.clob2file( xmltype( rc ).getclobval( ) , 'XML_EXPORT_DIR','my_xml_file.xml');
end;
( its the same when using output with DBMS_XMLDOM.WRITETOFILE )
open in xmlSpy is:
<?xml version="1.0"?>
<ROWSET>
<ROW>
<S0>1</S0>
<S1>hallo</S1>
</ROW>
<ROW>
<S0>2</S0>
<S1>straޥ</S1>
</ROW>
<ROW>
<S0>3</S0>
<S1>m㢫ie</S1>
</ROW>
<ROW>
<S0>4</S0>
<S1>euro_</S1>
</ROW>
</ROWSET>
regards
Norbert

I had an app created by a friend and submitted under his name as the developer. We need to transfer the app to me. I wanted to confirm the current proceedure for transferring ownership of an app.

I had an app created by a friend and submitted under his name as the developer. He is no longer doing apps so we need to transfer ownership of the app to me under my name. I found an explaination from June 11, 2013 from The App Store team and wanted to confirm if this is the current proceedure. (see below) Thank you.
"Starting June 11, 2013 this has officially become possible. Here's the official note:
Dear developer,
Apps can now be transferred from one developer to another within iTunes Connect, for example after an acquisition or when a distribution deal expires. Transferring the ownership of an app does not affect the app’s availability on the App Store. All ratings and reviews will be transferred and your customers will continue to have access to all available app updates.
To transfer an app, go to the app’s App Summary page in the Manage Your Applications module on iTunes Connect and click Transfer App. Make sure that:
• Your account is active
• You have accepted the most current version of your contracts
• Your app has at least one approved version
• Your app is in the Ready for Sale, Invalid Binary, Rejected, Developer Rejected, or Developer Removed from Sale state
• Any associated In-App Purchases are in the Ready to Submit, Ready for Sale, Rejected, Developer Removed from Sale, or Approved state
• You know the Apple ID of the recipient’s Team Agent and their Team ID.
For more information on app transfer, see the video tutorial on iTunes Connect. To find answers to common questions about app transfer, see the FAQ on iTunes Connect.
Regards, The App Store team"

What do you want?
You have the procedure.
Just do it.

Creating/Copying Z Objects and assign them to Tables/Structures/Programs...

Dear Colleagues,
I am failry new to ABAP,as I have mainly functional MM/SD/WM/
I need to be creating a fileld such as the one seen below( ZZLOOM).This is already showing on the transactions CO02/CO03(production orders).
Can you please therefore give me step by step rough guide how to create this field and assign it to the program and the table/structure?To which program needs this to be assigned on SE38? Is it the screen data program SAPLXCO1 or the field desciption for batch input program SAPLCOKO1-please see below.
Can I create the new (ZRAL) object by copying from the above (ZZLOOM) and on which Tcode I can do this?The program SAPLCOK01 is used(according to se38) on programs,ckasses and BSP applications.
Program Name SAPLXCO1
Screen number 0100
Program Name SAPLCOCU
Status VVKOPF
Table Name ZWRK_CI_AUFK
Field Name ZZLOOM
Data Element ZZLOOM
DE Supplement 0
Screen Field ZWRK_CI_AUFK-ZZLOOM
Program Name SAPLCOKO1
Screen Number 0115
All help appreciated,
PAPJ1.

Hi Archana,
I'm simply trying to add a field such as the existing ones showing up on the customer screen tab of CO02/CO03,so I copied ZZNESTNO (shown as NEST below) into a new field called ZZRALNO.
Mec MBW Start 18.05.2011
        End   18.05.2011
Ele SS Start 23.05.2011
        End   23.05.2011
Nest          17c
CoilNest
Pipe          16/05
Loom
COIL WIP
COIL DATE
Through F1,I found out the field details of ZZNESTNO,shown below:
Program Name     SAPLXCO1
Screen number    0100
Program Name     SAPLCOCU
Status           VVKOPF
Table Name       ZWRK_CI_AUFK
Field Name       ZZNESTNO
Data Element     ZZNESTNO
DE Supplement    0
Screen Field     ZWRK_CI_AUFK-ZZNESTNO
Program Name     SAPLCOKO1
Screen Number    0115
This is what I am trying to achieve-Is this any clearer?
Thanks a million for your help.
PAPJ1.
Edited by: PAPJ1 on Jun 8, 2011 4:37 PM

How can i find name of the variable used in the program and assign to a str

double width= .333;
        int i;
        for (i = 0; i <=2; i ++){
            segment[i] = i+1;
        }is a bit of code...Is there anyway using which I can find out the variable names and assign them to string variables so that i can match them with another table ....
That is I want the "width", "segment[0]", "segment[1]" and "segment[2]"...
pls help...

I am trying to find out the variable names in the program so that they can be matched against a given table for availability. I want to do that so that i can send the name, its type and value as a data packet to another node...I am not familiar with this...pls..would you give me a sample code

Error - Create chemical using program

Hi All,
I am trying to create a chemical using BO EHFND_CHEMICAL using program. Referring the sample code listed in 'Navigating to BOPF' blog series.
I have passed ROOT node and BI_CHEMICAL nodes. But I am getting error 'Mandatory node ROLE is missing'.
When I tried to add ROLE node , in the code its giving errors like 'Mandatory node ROLE is missing' OR can not create, source object does not exist'.
I went through the node structure for the BO. In it we have Root - > Revision -> Role.
So my query is how to pass information for ROLE node? We need to add REVISION node also?
If anybody can guide, will be really helpful.

Hi Shubhada,
The problem is that determinations are creating instances of some of the nodes. A determination is creating an instance of the REVISION node, but without the ROLE subnode instance—despite that the cardinality is 1:1…n. This results in the error Mandatory node ROLE missing.
The problem can be resolved by making two calls to the MODIFY method of the service manager. Create only the ROOT node instance with the first call, and the determinations will create additional node instances, including the REVISION node instance. Next get the key of the REVISION node instance, and use it to create an instance of the ROLE subnode by calling the MODIFY method again. Finally, commit the transaction by invoking the SAVE method of the transaction manager. Following is a code sample:
         "Create the ROOT
         CREATE DATA lr_s_root.
         lr_s_root->key        = /bobf/cl_frw_factory=>get_new_key( ).
         lr_s_root->chm_nature = 'M'.
         APPEND INITIAL LINE TO lt_mod ASSIGNING <ls_mod>.
         <ls_mod>-node         = if_ehfnd_chm_c=>sc_node-root.
         <ls_mod>-change_mode = /bobf/if_frw_c=>sc_modify_create.
         <ls_mod>-key          = lr_s_root->key.
         <ls_mod>-data         = lr_s_root.
         CALL METHOD me->mo_chm_bo->mo_svc_mngr->modify
           EXPORTING
             it_modification = lt_mod
           IMPORTING
             eo_change       = lo_change
             eo_message      = lo_message.
         FREE lt_mod.
         "The REVISION node instance was created via a
         "determination. Get its key; it's needed to
         "create the ROLE node instance.
         lt_change = lo_change->get_changes( ).
         READ TABLE lt_change ASSIGNING <ls_change> INDEX 1.
         <ls_change>-change_object->get_changes( IMPORTING et_change = lt_node_change ).
         READ TABLE lt_node_change
           WITH KEY key1 COMPONENTS node_key = if_ehfnd_chm_c=>sc_node-revision
           ASSIGNING <ls_node_change>.
         lv_rev_key = <ls_node_change>-key.
         "Create the ROLE node instance; it's mandatory but was
         "not created in a determination
         CREATE DATA lr_s_role.
         lr_s_role->key       = /bobf/cl_frw_factory=>get_new_key( ).
         lr_s_role->chemical_role = '1'.
         APPEND INITIAL LINE TO lt_mod ASSIGNING <ls_mod>.
         <ls_mod>-node        = if_ehfnd_chm_c=>sc_node-role.
         <ls_mod>-change_mode = /bobf/if_frw_c=>sc_modify_create.
         <ls_mod>-source_node = if_ehfnd_chm_c=>sc_node-revision.
         <ls_mod>-association =
           if_ehfnd_chm_c=>sc_association-revision-role.
         <ls_mod>-source_key = lv_rev_key.
         <ls_mod>-key         = lr_s_role->key.
         <ls_mod>-data        = lr_s_role.
         CALL METHOD me->mo_chm_bo->mo_svc_mngr->modify
           EXPORTING
             it_modification = lt_mod
           IMPORTING
             eo_change       = lo_change
             eo_message      = lo_message.
         "Commit the transaction
         CALL METHOD me->mo_chm_bo->mo_txn_mngr->save
           IMPORTING
             eo_message = lo_message
             ev_rejected = lv_rejected.

We can't create form using dblink and synonim

We have created a dblink pointing to a table in the remote database.
When we create a form based on table or view using this dblink, we get the error "page not found".
We read from
Re: I can't create form using dblink
that we must create a synonim, and this was done creating one in the same schema of the db-link using the "Database Objects" of oracle portal 10g (external db is an oracle 9.0.2).
The new synonim work (tested with reports and pl/sql page)
but if we click on "Grant Access" (of the synonim) we get the following error :
Error: The underlying object of the synonym does not exist, is a remote object or is not of type function, procedure, package, sequence, synonym, table or view. (WWV-17076)
Does form work only with table and view of the portal database (not external one)? or have we loose something in the creation of the synonim?
Have someone succesfully created a form based on a db-link towards an external database?
Thanks to all.

Hei guys, has nobody created succesfully a data-driven forms based on a dblink towards an external database?
I can't believe this!!!!

Create a DAQ program and display results on with waveform and spreadsheet

I need help creating a DAQ program that will read digital and analog channels and display on a continuous waveform, and then display readings on a spreadsheet

You definitely want to start with the example programs. There are many of them which ship with LabVIEW and even more on NI's Example Programs Library (http://www.ni.com/devzone/libraries/default.htm). Also, if you are wanting to use an Excel spreadsheet, I would suggest getting the Report Generation Toolkit for Microsoft Office. It simplifies your coding immensely and will save you a lot of time.
J.R. Allen

Creating Supplier Bank Accounts and assigning to Supplier.

Hi Team,
Step 1: I have created Suppliers,Sites and contacts.
Step 2: I have created one Supplier Bank and one Supplier Bank Branch.
In HZ_PARTIES I am able to see 3 records outof which one corresponds to Bank record and the other branch record and the other one is the relationship one.
Step 3 : For Account creation and assigning to Supplier level I am using the following API iby_ext_bankacct_pub.create_ext_bank_acct and passing these values,
p_in_acct_rec.bank_id := 62462; (party_id from hz_parties)
p_in_acct_rec.branch_id := 62464; (partyd_id from hz_parties)
p_in_acct_rec.country_code := 'DE';
p_in_acct_rec.bank_account_name := 'AKU BÜROMÖBELMNTAGE';
p_in_acct_rec.bank_account_num := 8707629220;
p_in_acct_rec.acct_owner_party_id := 23267; (party_id from ap_suppliers)
p_in_acct_rec.currency := 'GER';
p_in_acct_rec.object_version_number := '1.0';
p_in_acct_rec.start_date := sysdate;
p_in_acct_rec.foreign_payment_use_flag := 'Y';
p_in_acct_rec.payment_factor_flag := 'N';
iby_ext_bankacct_pub.create_ext_bank_acct
p_api_version => 1.0,
p_init_msg_list => fnd_api.g_true,
p_ext_bank_acct_rec => p_in_acct_rec,
p_association_level => 'S',
p_supplier_site_id => 1376, (getting from ap_suppliers)
p_party_site_id => 16202,
p_org_id => 304,
p_org_type => 'OPERATING_UNIT',
x_acct_id => l_account_id,
x_return_status => v_return_status,
x_msg_count => v_msg_count,
x_msg_data => v_msg_data,
x_response => x_result_rec_type
I am passing the above values to the API.
API is running succesfully.
I am able to check account details in the following table IBY_EXT_BANK_ACCOUNTS
After running the above API records are getting populated in these 3 tables IBY_EXT_BANK_ACCOUNTS, iby_account_owners, IBY_PMT_INSTR_USES_ALL
I am using the following query to cross verify whether the account is created and assigned to Supplier or not,
select s.vendor_name, ss.vendor_site_code,
eb.bank_name, ebb.bank_branch_name, ebb.branch_number,
eba.BANK_ACCOUNT_NUM, eba.BANK_ACCOUNT_NAME
from ap.ap_suppliers s, ap.ap_supplier_sites_all ss,
apps.iby_ext_bank_accounts eba,
apps.iby_account_owners ao, apps.iby_ext_banks_v eb, apps.iby_ext_bank_branches_v ebb
where s.vendor_id = ss.vendor_id
and ao.account_owner_party_id = s.party_id
and eba.ext_bank_account_id = ao.ext_bank_account_id
and eb.bank_party_id = ebb.bank_party_id
and eba.branch_id = ebb.branch_party_id
and eba.bank_id = eb.bank_party_id;
I am able to see the the record after running the above query.
I want the account to be attached to the Supplier level.
If I go to Supplier screen --> and if go to Bank details, I am unable to see the bank account attached to this supplier.

Hi,
Did you solved the issue? I have the same task and it works for me. Check if you specify the supplier level in the bank details. Once you specify the association level equal to 'S' you have to choose from the list item - "Supplier level". Here is my code which is same as yours i think...:
set serveroutput on size 1000000;
DECLARE
l_bank_acct_rec apps.iby_ext_bankacct_pub.extbankacct_rec_type;
out_mesg apps.iby_fndcpt_common_pub.result_rec_type;
L_ACCT NUMBER;
l_assign apps.iby_fndcpt_setup_pub.pmtinstrassignment_tbl_type;
l_payee_rec apps.iby_disbursement_setup_pub.payeecontext_rec_type;
l_return_status VARCHAR2 (30);
l_msg_count NUMBER;
l_msg_data VARCHAR2 (3000);
l_msg_dummy VARCHAR2 (3000);
l_output VARCHAR2 (3000);
l_bank_id NUMBER;
l_branch_id NUMBER;
l_bank VARCHAR2 (1000);
l_acct_owner_party_id NUMBER;
l_supplier_site_id NUMBER;
l_party_site_id NUMBER;
--exec_bank_acct EXCEPTION;
l_msg_index NUMBER := 0;
V_RETURN_STATUS varchar2(20);
V_MSG_COUNT number;
v_msg_data varchar2(500);
BEGIN
FND_GLOBAL.APPS_INITIALIZE(1112, 50639, 200);
l_bank_acct_rec.bank_id := 5087; --(party_id from hz_parties)
l_bank_acct_rec.branch_id := 5087; --(partyd_id from hz_parties)
l_bank_acct_rec.country_code := 'BG';
l_bank_acct_rec.bank_account_name := '45623123';
l_bank_acct_rec.bank_account_num := 123145124123;
l_bank_acct_rec.acct_owner_party_id := 183732;-- (party_id from ap_suppliers)
l_bank_acct_rec.currency := 'BGN';
l_bank_acct_rec.object_version_number := '1.0';
l_bank_acct_rec.start_date := sysdate;
--l_bank_acct_rec.foreign_payment_use_flag := 'Y';
--l_bank_acct_rec.payment_factor_flag := 'N';
apps.iby_ext_bankacct_pub.create_ext_bank_acct
(p_api_version => 1.0,
p_init_msg_list => 'F',
p_ext_bank_acct_rec => l_bank_acct_rec,
p_association_level => 'S',
p_supplier_site_id => 3020,
p_party_site_id => 43594,
p_org_id => 81,
p_org_type => 'OPERATING_UNIT',
x_acct_id => l_acct,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_response => out_mesg
COMMIT;
dbms_output.put_line (l_return_status);
IF l_return_status IN ('E') THEN
dbms_output.put_line (l_msg_count);
FOR i IN 1 .. l_msg_count
LOOP
apps.fnd_msg_pub.get( i, apps.fnd_api.g_false, l_msg_data, l_msg_index );
l_msg_data := l_msg_data || 'Bank Account API Error ';
DBMS_OUTPUT.PUT_LINE( 'Error :- '||l_msg_data);
END LOOP;
dbms_output.put_line (l_msg_data);
end if;
end;
/EBS Version: 12.1.3
DB: 11.1.0.7.0
BR,
Bahchevanov.

Istore 11.5.10 - creating a new site and assigning existing users to that

Hi,
I need to create a new site in iStore and assign all the Canada customers to that site. Can you please let me know how to do this.
I though that I would create a custom responsibility ABC_IBE_CUSTOMER same as IBE_CUSTOMER and attach that responsibility to the new site and the same responsibility to all the canada custoemers and when they login they will directly been directed to the new site in the customer UI. But it did not happen like that. I might be missing many things inbetween. Can you please let me know the step by step process to achieve this.
Thanks,
Srikanth

function(){return A.apply(null,[this].concat($A(arguments)))}
Why adobe has not issued an update!!!.
Agreed. I'm disappointed that no patch has yet been issued. Hope we don't have to go on explaining this for the next 12 months.

Creating PDFs using Pages and Mail

Hi,
I'm a contractor and I use Pages and Mail to to create PDFs of invoices that I email to clients in the form of attachments. I have Mail set up to to send only Windows friendly attachments, and to put them at the end of emails. I have one client, the facilities director of a large community college, who consistently cannot open the attachments; he can read the text of the emails, but he cannot open the attachments. He has to send them to his IT department, where they use a mac computer of some kind to open the attachments, which they send them back to him. I've discussed this with their IT department, and they've told me that they have to use a mac to open my attachments. If anyone can offer some advice on this issue, I'd appreciate it.
Caoim

I know from my own experience that although there should be no problems with Mail's attachments, just once in a while recipients have the problems you describe.
The solution that worked for me 100% reliably was to install the paid for plug-in Attachment Tamer from: lokiware.info
You can use it for free to test it before committing to purchase, but I'm pretty sure all your recipients will be able to cope with all your attachments.
To elaborate, I used to have to send numerous attachments every day to mostly PC users. Randomly some would complain that I'd either forgotten to include the attachment (I hadn't) or they couldn't read it/open it/save it, etc. It's quite likely the fault was in the way their email client was configured. All I know is that as soon as I installed Attachment Tamer (it was Mail Attachments Iconizer back then) I never had any more complaints. For the knowledge that I wasn't going to be pestered into trying different ways of sending the files I was happy to pay for the plugin.
(Usual caveat: I have no connection with Lokiware, but very happy to recommend their product).

Create PO using ME59N and set field WEAKT

We are using ME59N (as a background job) to convert approved and assigned req's into PO's. However we would like to set the field EKKO-WEAKT (GR Message) so that requisitioners can be informed when there goods arrive (we have this process working when the field WEAKT is set manually).
Any suggestions would be appreciated.

Hello, I too have the same requirement.
Did you have any updates on this.
Thanks
Jay

Creating InfoObjects using program and assignment under InfoObject Catalog

Similar Messages

Maybe you are looking for