Creating logical view using sql query

hi
i'm new in OBIEE,
would like to know if its possible to create a custom view (logical table) by writing a sql query (without use the existing tables in the business model).
how can i do that? i didnt find the place where i can write the sql manually...
thanks

Not in BMM layer but you can achieve this in Physical layer.
In physical layer --> Create New Physical Table --> select table type as Select

Similar Messages

Creating Attribute views using SQL

Hi experts,
Can attribute views be created using an SQL command?
As far as I know all the commands in the HANA modeler are translated eventually to SQL so I guess it should be possible.
Thanks.

Hi again,
Our goal is to dynamically create an attribute view, We're not trying to create a homegrown view but trying to create the attribute view using SQL syntax (like when creating an Analytic Privilege - by providing the XML).
Maybe I'll try to explain the cause for trying to do so and you could help me with the correct way to do it:
We develop an application within Information Steward which is called HiVo, we would like to provide record authorization for each role. As we understood the way to do it is by using attribute views and analytic privileges. We have a process which creates our schema on the DB machine (actually it's part of the "deployment" of the application) and the administrator defines the authorization for each role on a UI which is provided on BOE. We would like to take these definitions and combine them with the schema creation which is done programmatically.
We would like to do it using SQL commands in order to prevent dependency on the modeler SDK which was not used up till now and simplify the process for the administrator not having to use 2 different environments in order to complete the configuration process.
I hope now things are clearer and maybe you could assist us doing it correctly.
Again, thank you very much for your support,
Ran

Creating tabular form using SQL query

Hi,
I need to create a tabular form using an SQL query so that multiple rows of a table are displayed on screen and are editable to the user.
I have created this sort of form before using the Tabular Form wizard however for this form I need to enter SQL to produce it.
The steps I take are:
1. Create Page
2. Page with Component
3. Form
4. Fow on a SQL query
5. For the query I have: 'select * from depot_master_customer'
However when I view the page, it just displays one blank field with the title '*' !!
I am doing something completely wrong here? It seems like it should be a simple thing to do.
Any help appreciated, this one is driving me mad.
Thanks
Simon

Simon,
You will need to manually create the tabular form and DML process. This is covered in detail in the How To document shown below:
http://www.oracle.com/technology/products/database/htmldb/howtos/tabular_form.html
Have you tried this yet?
Good luck!
Emilio.

Query to create a view using the following tables

Hi,
I am struggling to write the proper query to create a view using three tables.
I would really be thankful if anyone can help me.
I am pasting the following script to create the required tables and also insert appropriate data in each of the table.
create table HR.STUDENT_DETAILS (
STUDENT_ID NUMBER(10),
STUDENT_NAME VARCHAR2(50),
DOB DATE,
SEX CHAR(1),
ACTIVE CHAR(1),
CONTACT_NUMBER NUMBER(20),
primary key(STUDENT_ID)
create table HR.PAYMENT_HEADER (
PAY_HEADER_ID NUMBER(10),
DOC_NUM NUMBER(5),
MONTH_NAME VARCHAR2(10),
primary key(PAY_HEADER_ID)
create table HR.PAYMENT_DETAILS (
HEADER_ID NUMBER(10),
LINE_ID NUMBER(10),
STUDENT_ID NUMBER(10),
CUM_AMOUNT NUMBER(10),
primary key(HEADER_ID,LINE_ID)
INSERT ALL
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1112,'James','17-JUN-05','M','Y',23674378)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1113,'David','21-SEP-05','M','Y',24565457)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1114,'Michael','13-JAN-06','M','Y',25436784)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1115,'Joseph','03-JAN-06','M','Y',23435673)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1116,'Juliet','21-MAY-05','F','Y',23234527)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1117,'Monica','25-JUN-05','F','Y',24873245)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1118,'William','05-FEB-05','M','Y',23623245)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1119,'Karen','07-FEB-06','F','Y',26757543)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1120,'Erika','17-AUG-05','F','Y',25435465)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1121,'Noah','16-AUG-05','M','Y',23457645)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1122,'Angelina','28-SEP-05','F','Y',26456787)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1123,'Gabriela','30-SEP-05','F','Y',29767543)
INTO HR.STUDENT_DETAILS (STUDENT_ID,STUDENT_NAME,DOB,SEX,ACTIVE,CONTACT_NUMBER) VALUES (1124,'Sofia','07-MAR-06','F','Y',27656578)
SELECT * FROM DUAL;
INSERT ALL
INTO HR.PAYMENT_HEADER (PAY_HEADER_ID,DOC_NUM,MONTH_NAME) VALUES (305,1,'JAN')
INTO HR.PAYMENT_HEADER (PAY_HEADER_ID,DOC_NUM,MONTH_NAME) VALUES (306,2,'FEB')
INTO HR.PAYMENT_HEADER (PAY_HEADER_ID,DOC_NUM,MONTH_NAME) VALUES (307,3,'MAR')
INTO HR.PAYMENT_HEADER (PAY_HEADER_ID,DOC_NUM,MONTH_NAME) VALUES (308,4,'APR')
INTO HR.PAYMENT_HEADER (PAY_HEADER_ID,DOC_NUM,MONTH_NAME) VALUES (309,5,'MAY')
SELECT * FROM DUAL;
INSERT ALL
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (305,12,1112,40)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (305,13,1113,40)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (305,14,1114,40)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (306,15,1112,80)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (306,16,1113,80)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (306,17,1114,80)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (306,18,1115,40)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (306,19,1116,40)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (307,20,1112,120)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (307,21,1113,120)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (307,22,1114,120)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (307,23,1115,80)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (307,24,1116,80)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (307,25,1117,40)
INTO HR.PAYMENT_DETAILS (HEADER_ID,LINE_ID,STUDENT_ID,CUM_AMOUNT) VALUES (307,26,1118,40)
SELECT * FROM DUAL;
The above table STUDENT_DETAILS stores the details of all the students and each student has a unique student id.
Another table PAYMENT_HEADER saves the payment details as a document for each month which has a header id.
In the PAYMENT_DETAILS table, payment details are stored for the students (who made the payment for that month). This table does not save the data for a student if he has not paid on that month. This table is connected to the PAYMENT_HEADER table through a header Id.
The view should be such that when I pass the document number, it shall show the names of all the students, but shall show payment amount only for those students who had paid under the selected document number, for other it should show null.
I tried the following query:
select * from (
select sd.student_name,sd.DOB,sd.sex,sd.contact_number,pd.doc_num,pd.month_name,pd.cum_amount
from hr.student_details sd left join
(select hdr.doc_num,hdr.month_name,det.student_id,det.cum_amount
from hr.payment_header hdr, hr.payment_details det
where hdr.pay_header_id = det.header_id) pd on sd.student_id = pd.student_id)
But when I pass the filtering values like document number, it does not show some students with null values.
select * from (
select sd.student_name,sd.DOB,sd.sex,sd.contact_number,pd.doc_num,pd.month_name,pd.cum_amount
from hr.student_details sd left join
(select hdr.doc_num,hdr.month_name,det.student_id,det.cum_amount
from hr.payment_header hdr, hr.payment_details det
where hdr.pay_header_id = det.header_id) pd on sd.student_id = pd.student_id)
where doc_num = 1 or doc_num is null;
My requirement is that, every time I use a document number in the where clause for the view it should show the paid amount against the student names who has paid on that month and for all other student it should null. Total student number is 13. So every time it should show 13 students only even when I pass document No 2 or 3.
Seeking your help.
Regards
Hawker

Hi Frank,
as per your advice, I am omitting the 'DOB', 'GENDER','ACTIVE','CONTACT_NUMBER' fields from the 'STUDENT_DETAILS' table.
I shall create separate tables and insert the desired output from the view for each where clause.
First let us create three tables each for the desired out put:
1) For the desired output I want to see when I pass doc_num as 1
create table HR.SDT_PAY_DET_DOC_ONE (
STUDENT_ID NUMBER(10),
STUDENT_NAME VARCHAR2(50),
DOC_NUM NUMBER(5),
C_AMOUNT NUMBER(10),
primary key(STUDENT_ID)
2) For the desired output I want to see when I pass doc_num as 2
create table HR.SDT_PAY_DET_DOC_TWO (
STUDENT_ID NUMBER(10),
STUDENT_NAME VARCHAR2(50),
DOC_NUM NUMBER(5),
C_AMOUNT NUMBER(10),
primary key(STUDENT_ID)
3) For the desired output I want to see when I pass doc_num as 3
create table HR.SDT_PAY_DET_DOC_THREE (
STUDENT_ID NUMBER(10),
STUDENT_NAME VARCHAR2(50),
DOC_NUM NUMBER(5),
C_AMOUNT NUMBER(10),
primary key(STUDENT_ID)
Now I shall insert values in each of the above three tables:
INSERT ALL
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1112,'James',1,40)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1113,'David',1,40)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1114,'Michael',1,40)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1115,'Joseph',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1116,'Juliet',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1117,'Monica',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1118,'William',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1119,'Karen',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1120,'Erika',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1121,'Noah',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1122,'Angelina',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1123,'Gabriela',null,null)
INTO HR.SDT_PAY_DET_DOC_ONE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1124,'Sofia',null,null)
SELECT * FROM DUAL;
INSERT ALL
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1112,'James',2,80)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1113,'David',2,80)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1114,'Michael',2,80)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1115,'Joseph',2,40)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1116,'Juliet',2,40)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1117,'Monica',null,null)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1118,'William',null,null)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1119,'Karen',null,null)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1120,'Erika',null,null)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1121,'Noah',null,null)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1122,'Angelina',null,null)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1123,'Gabriela',null,null)
INTO HR.SDT_PAY_DET_DOC_TWO(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1124,'Sofia',null,null)
SELECT * FROM DUAL;
INSERT ALL
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1112,'James',3,120)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1113,'David',3,120)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1114,'Michael',3,120)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1115,'Joseph',3,80)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1116,'Juliet',3,80)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1117,'Monica',3,40)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1118,'William',3,40)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1119,'Karen',null,null)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1120,'Erika',null,null)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1121,'Noah',null,null)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1122,'Angelina',null,null)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1123,'Gabriela',null,null)
INTO HR.SDT_PAY_DET_DOC_THREE(STUDENT_ID,STUDENT_NAME,DOC_NUM,C_AMOUNT) VALUES (1124,'Sofia',null,null)
SELECT * FROM DUAL;
Thanks & Regards
Hawker

Creating a ad-hoc calculation using sql query

Hi All,
I want to know if its possible some way to create a ad-hoc sql query inside a workbook so as to create a calculation using that sql.
I have a folder which gives me balance for any period. My requirement is to display current period balance along with prior years closing balance in same record for each code combination. I dont want to modify folder definition.
Thanks for your inputs.
Vishal.

You could try creating a custom function for this purpose. You would need to register the function in the End User Layer and then you can call the function from your report.

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

Information about constraints by using SQL query?

Hi
how can we view all the definition of a constraint by using SQL query.
Suppose I create following tables:
CREATE TABLE supplier
( supplier_id numeric(10) not null,
supplier_name varchar2(50) not null,
contact_name varchar2(50),
CONSTRAINT supplier_pk PRIMARY KEY (supplier_id, supplier_name)
CREATE TABLE products
( product_id numeric(10) not null,
supplier_id numeric(10) not null,
supplier_name varchar2(50) not null,
CONSTRAINT fk_supplier_comp
FOREIGN KEY (supplier_id, supplier_name)
REFERENCES supplier(supplier_id, supplier_name)
ON DELETE CASCADE
e.g. CONSTRAINT fk_supplier_comp: Plz write me the SQL query that tells that this is a FOREIGN KEY (supplier_id, supplier_name) and REFERENCES supplier(supplier_id, supplier_name) .....etc.
thanks

You mean "What is an Oracle Metalink?"
Then, Oracle Metalink (www.metalink.oracle.com) is an official web site of Oracle Corporation. This is the area where you can get an ultimate and immediate fixes for any sort of Oracle/Issues/Problems. And also, Patches/fixes/Notes/Procedures can be used as reference and can be downloaded from this.
Note: Sharing of Oracle Metalink information/credentials is highly illegal act.
Fore more information and benefits on Oracle Metalink, please take a look at the below URL.
http://www.oracle.com/support/premier/metalink.html
Regards,
Sabdar Syed.

Creating a view using With causes ORA-00600 Error

Hello Ladies and Gents,
I've been trying to deploy a recursive query as a view in Oracle XE and Standard Edition, neither to much success.
The query is located in this question here: http://stackoverflow.com/questions/17358109/how-to-retrieve-all-recursive-children-of-parent-row-in-oracle-sq
with recursion_view(base, parent_id, child_id, qty) as (
   -- first step, get rows to start with
   select
parent_id base,
parent_id,
child_id,
qty
from
md_boms
union all
-- subsequent steps
select
   -- retain base value from previous level
previous_level.base,
   -- get information from current level
current_level.parent_id,
current_level.child_id,
   -- accumulate sum
   (previous_level.qty + current_level.qty) as qty
from
recursion_view previous_level,
md_boms current_level
where
current_level.parent_id = previous_level.child_id
select
base, parent_id, child_id, qty
from
recursion_view
order by
base, parent_id, child_id
The query itself works and returns results. However, when I try to create a view with that query, I receive errors.
I've posted two screenshots: http://www.williverstravels.com/JDev/Forums/StackOverflow/17358109/ViewError.jpg and http://www.williverstravels.com/JDev/Forums/StackOverflow/17358109/InternalError.jpg The first one with the ! and * is when I am using JDeveloper 11g, using the Database Navigator, right-click on View and select "New View". I receive the error when I click OK. I can indeed create the view through a sql script, but when I attempt to view the data, I receive the ORA_00600 error.
I've tried this on both my local machine for XE (version 11.2.0.2.0) and on 11g Standard Edition (11.2.0.2.v6) via Amazon Web Services. The result is the same.
Does anyone know how to get around this?

Not 5 minutes after I post this, I decide not to use JDev's graphical editor, and simply write
SELECT * FROM BOMS_VIEW;
And it works like a charm. I just can't use data tab to view the records in the editor. Wish I had known that 5 hours ago.

View using Union Query

All,
How to create a view using a union query in sql developer. I tried doing but when i check the syntax I got an error
"The SQL syntax is valid, however the query is invalid or uses functionality that is not supported.
Declarative query support does not currently include UNION, INTERSECT or MINUS"
Could some one help me out
Regards

792011 wrote:
All,
How to create a view using a union query in sql developer. I tried doing but when i check the syntax I got an error
"The SQL syntax is valid, however the query is invalid or uses functionality that is not supported.
Declarative query support does not currently include UNION, INTERSECT or MINUS"
Could some one help me outuse different/upgraded client since UNION is valid SQL

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

Create statspack report using sql*developer

Hello,
While connecting with PERFSTAT user I can not create statspack report using SQL*Developer:
@?/rdbms/admin/awrrpt
Error starting at line 1 in command:
@?/rdbms/admin/awrrpt
Error report:
Unable to open file: "?/rdbms/admin/awrrpt.sql"
Actually, my problem or question is that how can PERFSTAT user can generate statspack reports from a Client side. What is the other way a non-dba can see the snapshots histroy and generate report (by using perfstat user ) while joing tables or using views?
Thanks a lot.
Best Regards

Hi,
for awr reports @?/rdbms/admin/awrrpt (you need EE+Diagnostic Pack) there is a solution.
Grant execute dbms_workload_repository to <user>;
Grant select_catalog_role to <user>;
get all SNAP_IDs
SELECT   TO_CHAR(s.startup_time,'YYYY.MM.DD HH24:MI:SS') INSTART_FMT,
         di.instance_name INST_NAME,
         di.db_name DB_NAME,
         s.snap_id SNAP_ID,
         TO_CHAR(s.end_interval_time,'YYYY.MM.DD HH24:MI:SS') SNAPDAT,
         s.snap_level LVL
FROM    dba_hist_snapshot s,
         dba_hist_database_instance di
WHERE   di.dbid = s.dbid
         AND di.instance_number = s.instance_number
         AND Di.Startup_Time = S.Startup_Time
ORDER BY snap_id desc;
Select * From Table(Sys.Dbms_Workload_Repository.Awr_Report_Html(DBID, 1, BEGIN_SNAP_ID, END_SNAP_ID));
For statspack i don't know a solutuion. I think the best idea is, create a job to make the statspack report on the server side and access it via external tables or mail them forward to you.
Best regards
Thomas

How do I create a view in SQL Server in Visual Studio Express 2013 for Desktop?

Hi
I've got a SQL Server database set up using the internal SQL Server in Visual Studio Express 2013 for Desktop. I want to create a view (using tables with one to many relationships) but I don't
know how to do it.
Where can I find a good tutorial on creating views in SQL Server in Visual Studio Express 2013 for Desktop? I think Visual Studio Express 2013 for Desktop doesn't have some view designer that
exists in the non-express version of Visual Studio (if I'm not mistaken). So I think I'd need a tutorial on how to do the actual SQL, unless there is some tool I don't know about.
Thanks

Hi ,
According to your description, if you install SQL Server SQL Server 2014 Express and SQL Server Manager Studio tools (SSMS), if you want to create a view, you can use SSMS. Then if you want to connect to and Diagram your SQL Express Database in Visual Studio
2013, you can attach the database file by using the .NET Framework Data Provider for SQL Server in Visual Studio, and create a database diagram via expanding the “Database Diagrams” node.
For more information, there is similar issue about how to connect to and Diagram your SQL Express Database in Visual Studio 2012 , you can review the following article,
http://blogs.msdn.com/b/bethmassi/archive/2011/10/27/how-to-connect-to-and-diagram-your-sql-express-database-in-visual-studio-lightswitch.aspx.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How to create a view in sql workshop depending on an application item value

Hello,
How coud I create a view in SQL worshop based on an application item value? For example select id, name
from gg_provider
where user = ' || :USER
So basically each user would have it's own view. But it does not work like that. I think when I use :USER then the database takes database user not the user logged in to apex application. How would be possible to use application user to create the view?
Thank you very much.

Instead of
:APP_USER
use
v('APP_USER')
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How to retrive the blob data from a table using sql query

Hi gurus,
I have a table which has " BLOB "content in a column .I want to view the data From BLOB column using sql query .It would be helpfull If some one share their idea.
Regards,
vardhani.

You can use data templates.
See this: http://blogs.oracle.com/xmlpublisher/entry/blob_clob_raw_and_looooong
http://blogs.oracle.com/xmlpublisher/entry/inserting_blobs_into_your_repo
Thanks,
Bipuser

Build essbase cube using Sql query.....

Hi Team, Can we build dimensions as well as load data into essbase cubes using sql query generated from cognos cube. If so , please guide me the procedure

I'm not sure about cognos, if you can create an ODBC connection you can try using that in SQL load rules and see if that works.
Opening an SQL Database
Regards
Celvin
http://www.orahyplabs.com

Creating logical view using sql query

Similar Messages

Maybe you are looking for