Creating multiple entries in ztable with the same name
Dear sir / madam,
iam new in sap-abap , i have created ztable in se11, table name zrajesh
and fields i have created zemp_name and zempid which has data element and domain also. and zprice.
when iam creating entries in table mataince generator
eg: zemp_name zempid zprice
rajesh 001 100
raj 002 110
rajesh 001 200
rajesh 001 300
rajesh 001 250
i am looking forward to create multiple entries of the same employ name .. as shown in example . iam able to create numbers of entries with the help of different names. is it possible to create numbers of entries with same name..
and it will show all the entries in the list when display.
please help me..
regards,
rajesh swami
hi,
have a look at these tables
VBAK - Header table
VBAP - Item table
here in table VBAK we have a key field VBELN(document no.)
Whereas for the same document no. we can have many entries in the the table VBAP where the key is VBELN(document no.)
and POSNR (line item no.).
You have to do something of this type i suppose ............
Hope it helps you,
Regards,
Abhijit G. Borkar
Similar Messages
-
Can I create a lot of instance with the same name?
I have, for a project in my studies, to create a map for an adventure game. I must create monsters on this map. For this I use a class that I called Creature. In my class Map i have to initialise the monsters but I
choose their quantity with Math.random() so I don't know how much the map will contain. If in a loop I do: Creature monster = new Creature(); will I have different instances with the same name(I doubt)? Will I have one monster re-created in each iteration of the loop? How can I do to have different monsters in different places (my map is a matrix 2x2)?You would have many Creature references made, but only one variable to hold them, and it would go out of scope outside your loop. You could create a Creature array or use a List (both defined outside your loop) - as
// array
int numCreatures = randomGeneratedCreatureQuantity();
Creature[] monsters = new Creature[numCreatures];
for (int j = 0; j < numCreatures; j++) {
monsters[j] = new Creature();
// Or a list
int numCreatures = randomGeneratedCreatureQuantity();
ArrayList monsters = new ArrayList();
for (int j = 0; j < numCreatures; j++) {
monsters.add(new Creature());
}Good luck
Lee -
Multiple ios products with the same name.
Hello guys,
We have multiple iOS universal products with the same name for different countries. Will it cause any issues when the user installs them in the same device? Using Xcode to push them to my device, i noticed that they are all installed in the same place, i.e only one app is available. So my question is how should we do to use the same name for multiple apps and is it possible?Go ahead and doubt if it makes you feel superior.
For others:
If your pom has this:
<dependency>
<groupId>javax.faces</groupId>
<artifactId>jsf-api</artifactId>
<version>${jsf.version}</version>
</dependency>
<dependency>
<groupId>javax.faces</groupId>
<artifactId>jsf-impl</artifactId>
<version>${jsf.version}</version>
</dependency>
where jsf.version = 1.2, change jsf.version to 1.2_10 -
I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?
I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.
-
Multiple ResourceBundle definitions with the same name
I created a new web application project with JSF support using Netbeans 5.5Beta. The new project has a simple welcomeJSF page that I did not modify. The only modifications I did is adding a CustomMessages.properties file under com.mywebsite.resourcs and adding the following entry to faces-config.xml:
<application>
<resource-bundle>
<base-name>com.mywebsite.resources.CustomMessages</base-name>
<var>BundleOne</var>
</resource-bundle>
<locale-config>
<default-locale>en</default-locale>
</locale-config>
</application>Now when I right click welcomeJSF and select Run File, the follow error is added to the log file of SJSAS PE9:
Message ID:
WebModule[/WebApplication1]Exception sending context initialized event to listener instance of class com.sun.faces.config.GlassFishConfigureListener javax.faces.FacesException
Complete Message
Can't parse configuration file: jndi:/server/WebApplication1/WEB-INF/faces-config.xml: Error at line 14 column 27: Error at (14, 27: Multiple ResourceBundle definitions with the same name: BundleOne.
at com.sun.faces.config.ConfigureListener.parse(ConfigureListener.java:1751)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:524)
at com.sun.faces.config.GlassFishConfigureListener.contextInitialized(GlassFishConfigureListener.java:47)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4236)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4760)
at com.sun.enterprise.web.WebModule.start(WebModule.java:292)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:833)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:817)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:659)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1468)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1133)
at com.sun.enterprise.server.WebModuleDeployEventListener.moduleDeployed(WebModuleDeployEventListener.java:171)
at com.sun.enterprise.server.WebModuleDeployEventListener.moduleDeployed(WebModuleDeployEventListener.java:275)
at com.sun.enterprise.admin.event.AdminEventMulticaster.invokeModuleDeployEventListener(AdminEventMulticaster.java:954)
at com.sun.enterprise.admin.event.AdminEventMulticaster.handleModuleDeployEvent(AdminEventMulticaster.java:941)
at com.sun.enterprise.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:448)
at com.sun.enterprise.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:160)
at com.sun.enterprise.admin.server.core.DeploymentNotificationHelper.multicastEvent(DeploymentNotificationHelper.java:296)
at com.sun.enterprise.deployment.phasing.DeploymentServiceUtils.multicastEvent(DeploymentServiceUtils.java:203)
at com.sun.enterprise.deployment.phasing.ServerDeploymentTarget.sendStartEvent(ServerDeploymentTarget.java:285)
at com.sun.enterprise.deployment.phasing.ApplicationStartPhase.runPhase(ApplicationStartPhase.java:119)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.start(PEDeploymentService.java:541)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.start(PEDeploymentService.java:585)
at com.sun.enterprise.admin.mbeans.ApplicationsConfigMBean.start(ApplicationsConfigMBean.java:719)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:353)
at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:336)
at com.sun.enterprise.admin.config.BaseConfigMBean.invoke(BaseConfigMBean.java:448)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at sun.reflect.GeneratedMethodAccessor23.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.admin.util.proxy.ProxyClass.invoke(ProxyClass.java:77)
at $Proxy1.invoke(Unknown Source)
at com.sun.enterprise.admin.server.core.jmx.SunoneInterceptor.invoke(SunoneInterceptor.java:297)
at com.sun.enterprise.admin.jmx.remote.server.callers.InvokeCaller.call(InvokeCaller.java:56)
at com.sun.enterprise.admin.jmx.remote.server.MBeanServerRequestHandler.handle(MBeanServerRequestHandler.java:142)
at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.processRequest(RemoteJmxConnectorServlet.java:109)
at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.doPost(RemoteJmxConnectorServlet.java:180)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)Go ahead and doubt if it makes you feel superior.
For others:
If your pom has this:
<dependency>
<groupId>javax.faces</groupId>
<artifactId>jsf-api</artifactId>
<version>${jsf.version}</version>
</dependency>
<dependency>
<groupId>javax.faces</groupId>
<artifactId>jsf-impl</artifactId>
<version>${jsf.version}</version>
</dependency>
where jsf.version = 1.2, change jsf.version to 1.2_10 -
Bug with workflow that creates a folder and sub folder with the same name.
Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martinnot sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
RE: multiple named objects with the same name andinterface
David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> -
Is it possible to search for multiple folders with the same name and...
Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.
user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle: user11919409
Status Level: Newbie (10)
Registered: Dec 7, 2009
Total Posts: 102
Total Questions: 28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions? -
XOQ-01950: Cube contains multiple BuildSpecifications with the same name.
Hi All ,
While executing the Maintain Cube option it is throwing below issue : Any Clue ?
XOQ-01950: The AWCubeOrganization for cube "NN_OLAP_POC.MARKET_SALES_CUBE" contains multiple BuildSpecifications with the same name.
Thanks,
DxPThis error should only show up when you create a cube (by importing XML), not when you maintain it. So I will assume that this is what you mean.
If you import XML that refers to an OLAP object that already exists, then the new definition overrides the old one. The only exception to this rule is the BuildSpecification object. This kind of object is named, but it does not follow these conventions (for messy implementation reasons). If you import XML that has a BuildSpecificaiton with the same name as one that already exists, then you will trigger the error you see. Here is an example of the relevant XML.
<BuildSpecifications>
<![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
LOAD NO SYNCH,
SOLVE
) ]]>
</BuildSpecifications>The workaround is to delete this section from the XML before importing it. -
How to create reports servers with the same name in two nodes in Reports
Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas? -
I created my Apple ID in Ireland, but would now like to switch to a German Apple ID, keeping the same email address. How do I delete my old Irish Apple ID, so I can create a new German one with the same email?
Welcome to the Apple Community.
Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support. -
Newbie : How can i create 2 users with the same name on diff domain name ?
I have two domains on my server
exemple1.com
exemple2.com
and i want to create one user for each domain with the same name
[email protected] and [email protected]
curently i can create one user, and it's the same user for both domains :-/
how ?
thanks
HèteI must say. I am equally curious about this. i've played a lot in Communigate and it is easy to do there but how does one do this in apple mail?
-
Why do I see multiple users with the same name as an output of "users"
Recently, I found a peculiar thing when I typed "users" in the terminal. There were three users with the same name. After restart(power went down) I now see only one user there. Is this normal and why it can be happening? Why are there duplicate users sometimes?
alphaniner wrote:
Well now I'm confused. My xterm (xfce4-terminal) has that option disabled but I still get a user entry for each tab.
OT: you can run who to get a better idea of what each user is associated with. Eg. with Xorg on tty1 and terminal open with two tabs:
$ who
testing tty1 2013-12-11 08:55
testing pts/0 2013-12-11 08:55 (:0.0)
testing pts/1 2013-12-11 15:51 (:0.0)
Oh there is another option on mine besides "Run command as a login shell" called "Update login records when command is launched" I have them both disabled. Check for a second option maybe. -
Is it possible to create a Clone database with the same name of source db ?
Is it possible to create a Clone database with the same name of source db using RMAN ...
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle: user11919409
Status Level: Newbie (10)
Registered: Dec 7, 2009
Total Posts: 102
Total Questions: 28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions? -
Revision: 949
Author: [email protected]
Date: 2008-03-27 07:12:59 -0700 (Thu, 27 Mar 2008)
Log Message:
Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name, it causes a ClassCastException in the server
QA: Yes - try again with legacy-collection true and false.
Doc: No
Checkintests: Pass
Details: Another try in fixing this bug. When legacy-collection is false, Actionscript Array on the client becomes Java Array on the server and my fix yesterday assumed this case. However, when legacy-collection is true, Actionscript Array becomes Java ArrayList on the server. So added code to handle this case.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-96
Modified Paths:
blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/proxy/RequestF ilter.javaHi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all!
Maybe you are looking for
-
score button work ok last night , printed bass notitation ok,, to night 12am score button does not work can not see notation help!!~! mr bass player
-
I Created PO Stock. and i want to do Good Receipt. but i getting error like this Cost center 1000/130102 blocked against direct postings on 08.12.2011 i have checked the cost center. and yes for cost center 130102 are blocked. what i want to ask is.
-
The VIServer doesn't work when importing/exporting complicated and many input/output VI.
My VI server and client works fine when I importing and exporting uncomplicated VI. When I import/export many input/output and complicated VI, that complicated VI doesn't give any output. I don't get any error in the error message either (it said "No
-
Can I import video into iMovie Theater directly?
In iPhoto I created a Slideshow with Music of an iPhoto Album of pictures and video clips. When exported this creates a .m4v file. Can I directly get this file into iMovie Theater? Without first going to iMovie, importing the .m4v file and Sharing
-
COMCAST Changed Outgoing Port #?
Does anyone know Comcast outgoing Port Number for Versamail? It was 25 then 465 now neither work. Receiving email is still ok with Port 995. Had to make outgoing Port change on home computer's Outlook last year but it still works on 465 now. No usef