Creating multiple page files from PDF templates

I have a PDF file that is 3 pages. When I create the 3 page template form through Acrobat 8 Forms, and then it is placed in Lifecycle designer, I can save it. All of the fields that I create remain in the file. But, I cannot add another page (PDF template) to this Lifecycle file. I have to go back to the original PDF file, add the page, and then import back into Lifecyle, and add back all of the fields. Can I just save a text file with the correct XML code, and then paste it back in after I add another page. I tried it, but didn't have much success.

Yes it is possible,
All you need to do is create 3 destinations each of type Flat file.
For your data target link to the and Open Destinations1, link by creating a transformation. and while create DTP use filter A.
Again for your data target link to the another Open Destination2, link by creating a transformation and while creating DTP use Filter B.
similarly for Open Destination3, use Filter C.
Regards,Vj

Similar Messages

Create multiple page jpgs from pdfs

Hi,
My boss has asked me to convert a large number of multiple-page pdfs into multiple-page jpgs. I have been able to convert the pdfs to jpgs in photo shop using image processor, but the processor only captures the first page of the multiple page documents and when I have been able to convert an entire pdf to jpeg, it creates individual jpg files for each separate page.
How can I convert the multiple-page pdf file to a single multiple-page jpg file?
many thanks!

There are very few raster formats that support multi-page. The only one I can think of at the moment is Tiff which is a special fax format. In that mode I don't recall if it supports color or not. I know they were talking about adding color for the newer color fax machines. As you can tell that was years ago. So I would assume the tiff fax mode has improved by now.
Since tiff and psd support layers, you could place each page on its own layer, then leave it up to the program viewing the file to determine how to switch between layers to see each page. Yeah it is a work around, but is doable.
That said, I am not up to date on all the formats and what new features they contain. So I could easily be missing a format that could be of use to you.

How to create bulk configuration files from a template for staging?

Hello,
We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
So our problem comes down to creating a template from a sample configuration, and creating bulk configuration files from the template. Is there a specific tool or procedure to achive this purpose?
Thanks in Advance,
Best Regards,

Hi,
Try this one http://www.gen-it.net
Regards,
Stuart

Question about creating multiple output files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

You can write a shell script to generate the multiple spools files for the same output. Below script may helps you.
#====================
#!/bin/bash
n=0
while [ $n -le 20 ]
do
n=`expr $n + 1`
sqlplus -s system/manager <<EOF
spool emp_dept_$n.xml
select count(1) from tab;
spool off
EOF
done
#====================

Question about creating multiple XML files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
We are using DBMS_XMLGEN package to generate XML.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

one solution i can think of is to use SQLX operator instead of dbms_xmlgen.
here is a sample example.
declare
l_xmltype xmltype;
l_deptno emp.deptno%type;
begin
for i in (select * from emp order by deptno)
loop
    select xmlconcat(
                xmlelement("ename", i.ename)
               ,xmlelement("sal", i.sal)
               ,xmlelement("detpno", i.deptno))
      into l_xmltype from dual;
    dbms_output.put_line(l_xmltype.GetClobVal());
end loop;
end;
/Now here you can open the query once, keep writing to the file till the deptno
is same, when the deptno changes, close the file and open a new file with new
deptno and start writing.
Note : in this way you will have to add the xmlprolog manually to each of the file which should not be an issue. after opening the file add the prolog string manually.
Hope this helps.

Creating multiple XML files from Schema

We are extracting data from Oracle DB into XML using ODI. We are successful in generating the XML file, using command "create xmlfile <file name> from schema <Schema Name>, but the entire data comes in Single file.
Our database schema is relatively Huge and we would like to generate multiple XML files. We want to generate one file per particular number of records. Can anyone help to do this.

one solution i can think of is to use SQLX operator instead of dbms_xmlgen.
here is a sample example.
declare
l_xmltype xmltype;
l_deptno emp.deptno%type;
begin
for i in (select * from emp order by deptno)
loop
    select xmlconcat(
                xmlelement("ename", i.ename)
               ,xmlelement("sal", i.sal)
               ,xmlelement("detpno", i.deptno))
      into l_xmltype from dual;
    dbms_output.put_line(l_xmltype.GetClobVal());
end loop;
end;
/Now here you can open the query once, keep writing to the file till the deptno
is same, when the deptno changes, close the file and open a new file with new
deptno and start writing.
Note : in this way you will have to add the xmlprolog manually to each of the file which should not be an issue. after opening the file add the prolog string manually.
Hope this helps.

How do I create multiple text files from a list in another file?

I have a text file with data in it:
1. Bristol
2. Bath
3. Exeter
etc
I want to run an action which outputs the following files:
1.txt (contents: 1 Bristol)
2.txt (contents: 2.Bath)
3.txt (contents: 3.Exeter)
I can't work ou how to do this, any help appreciated. Thanks
Dave

Hi mate, thanks for the suggestion. I saw that section in the user guide - but it is only for copying from one library to another - I want to copy from an FCP library to a file structure OUTSIDE FCP. I have had problems with FCP losing media when copying to another library so I just want the files in the Finder where I can see them...
Stephen

Creating multiple flat files from a single source using Open Hub

Hi All,
I am not sure if its a common scenario but we have a requirement where in we have to split the data in the target into 3 different flat files depending on certain conditions. For e.g.
If the value of an attribute in a record is A then I have to create a file, if it is B then another file and if it is C, then another file.
Is this possible to achieve through open hub? We have a requirement to load only delta records. Any inputs is appreciated and would be rewarded.
Thanks and Regards,
Sundar

Yes it is possible,
All you need to do is create 3 destinations each of type Flat file.
For your data target link to the and Open Destinations1, link by creating a transformation. and while create DTP use filter A.
Again for your data target link to the another Open Destination2, link by creating a transformation and while creating DTP use Filter B.
similarly for Open Destination3, use Filter C.
Regards,Vj

Creating multiple page templates!

I'm trying to create multiple page styles as one template to work in the same way as the Apple supplied templates.
I can create all my page styles as one Pages document and save as a template but the finished template doesn't work in the same way as the Apple templates do e.g. I can not insert pages to a document created from my template. I can only insert sections. When inserting a new section I only have a choice of adding a blank or a text page and not choose one of my created page styles.
I think I'm missing something quite fundemental! I know it can be done because I've downloaded a template from the iCommunity exchange and that worked perfectly.
Any ideas folks?

Before saving your template, you need to "capture" all of the pages that you want to have available to insert.
Format > Advanced > Capture Pages...
Message was edited by: ThrashNeon

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Apple Preview, creating multiple page PDFs

I often need to create multiple page PDF documents by using either existing images or by using a scanner. Is there an easy way to so simply choose multiple files in the finder and right-click "Create PDF from files"?
We have:
- Compress 2 items
- Rename 2 items
- Burn 2 items to disc
How about
Compress items
2
Rename items
2
Burn items
2
Create PDF from items
2
I also noticed that the cover page mostly is full size and the sup pages of the created PDF document contains a white border. Is this the printer margin that is automatically assigned to the sub pages?

Yes, and another automator for opening the sidebar automatically if a PDF contains at least 2 pages.
THANK YOU ... my Apple computer is not dumb.

How to create a smallest file size pdf from indesign CS4 document

How to create a smallest file size pdf (suitable for upload to a website) from indesign CS4 document which contains multiple illustrator CS4 illustrations.
I have chosen the "smallest file size option" but the pdf file is over 30MB, can anyone help please.
Thank you

One trick is to
Set the placed graphics to have a transparency of 99.9% (you can do this with Find/Change and select Objects)
This is enough to force the graphics throught the Transparency Flattener
Next set the Transparency Blend Space to RGB (Edit>Transparency Blend Space)
Next set a custom Transparency Flattner Preset Edit>Transparency Flattner
Next
Use File>Export and choose
Smallest file size
PDF Compatibility Acrobat 4 (PDF 1.3)
In Advanced Section - go to transparency and selec the new Flattener Preset you created.
*this will convert your vectors to raster, but it should reduce your file size

How do I scan multiple pages into one pdf file using the PIXMA MG7520 on Windows 8.0? Please help!

I recently received a PIXMA MG7520 for a gift. It works great with my lenovo laptop/tablet running on Windos 8.0. The one drawback to the HP all-in-one that it replaced is it does not have an ADF. That being said, there must be some way to scan multiple pages into one pdf file. I need help figuring thing out. Thanks in advance!
Solved!
Go to Solution.

Hi mdtolbert54,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document. To do this, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do i scan multiple pages into one pdf file

How do I scan multiple pages into one pdf file?

That depends on your scanning software. Adobe Reader doesn't scan.

Using Acrobat XI MAC, unable to create Word file from PDF. Tried a simple PDF as well as a complex file. Neither can be created.

Using Acrobat XI mac. Why can I not create a Word file from a PDF? Tried some remedies offered online, i.e. convert to PDF X4:2008 then try to convert to the Word file. No go. Advise.

Hello,
I have tried 3 PDFs: one with only text - created in Illustrator(CS5) and saved as a PDF default, and the second which was a complex form of text and scanned images created in QuarkXpress and saved as a PDF for print purposes. The third file was a simple PDF offered online to solve problem.
Each attempt was to create a Word file. Each received the same error message: Save as failed to process this document. No file was created.
Thank you in advance.

Creating multiple page files from PDF templates

Similar Messages

Maybe you are looking for