Creating new batch without introducing new recipient

Dear Experts,
We are working on Documaker v11.4.  We have a requirement to create a new batch without creating a new recipient.  We used the following logic in "BatchingByRecip" control group of configuration file (fsiuser.ini)
< BatchingByRecip >
    Batch_Recip_Def        = =DAL("NEWBATCHDAL");"NEWBATCH";RCP1;
    Batch_Recip_Def        = True;"RCP1";RCP1;
The logic worked fine in local environment, but the client environment involves "MergeWIP" rule in respective afgjob where the batching happens.  In the environment, the same logic is not working.  Could you please let us know, if the logic is linked with any other rule in "afgjob.jdt"?
Please find the afgjob of the environment where the logic is not working as follows:
<Base Rules>
;RULStandardJobProc;1;Always the first job level rule;
;MergeWIP;;BATCHPRINT;
;JobInit1;1;;
/* Every form set in this base uses these rules. */
<Base Form Set Rules>
;WIPTransactions;;BATCHPRINT,/BATCHPRINTED;
;GVM2GVM;2;Trigger2Wip;
;ResetDocSetNames;;
;BatchingByRecipINI;2;;
;UpdatePOLFile;2;;
/* Every image in this base uses these rules. */
<Base Image Rules>
;RULStandardImageProc;3;Always the first image level rule;
/* Every field in this base uses these rules. */
<Base Field Rules>
;WIPFieldProc;;

The MergeWIP / WIPTransaction is nothing more than where the transaction comes from. In this case, it defines that the transactions come from WIP with the the specified transaction status.  You don't appear to be doing additional triggering, therefore the recipients would have already existed in the WIP transaction.
You did not mention any messages that might be output from the system as that might help point to the cause.
Perhaps the problem lies in the INI file where you did not copy over all the other relevant batch definitions?
Or perhaps your batching script is referencing some GVMs or other content that you previously determined via extract file or using XML xPath and since you are loading from WIP you don't have either of those?

Similar Messages

  • How to create new Custom XML Report without using Form Builder

    Hi,
    What are the steps to create new Custom XML Report without using Report Builder ?
    Thanks and Regards,
    Abhi

    Hi,
    Steps we now follow
    1)Create Data Model in Reports Builder
    2)Create xml
    3)Insert xml in Publisher to build Fomat
    4)FTp rdf
    5)Create Data Definition and Template
    6)Create executable and Concurrent Program
    Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
    Thanks and Regards,
    Abhijit Rode

  • I just bought a new Ipad mini a while ago, a created a new apple ID "***************" , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?

    I just bought a new Ipad mini a while ago, and created a new apple ID *********** , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?
    <Edited by Host>

    Read this:
    iTunes Store: Accepted forms of payment
    It is the same for the app store. You are required to have some sort of payment method in the record.
    Barry

  • How can I mass move symbols with their motion paths without creating new keyframes?

    I want to move a lot of symbols all at once if they are off centered or just need to be moved around to see differenr styles across the document, but I can't seem to move a lot of the symbols at once, only one at a time slexting their motion paths. It's rather annoying when I have items coming in at different times and have to re line everything up one by one if I want to move things even over by 1 px. Every time I slecect all my symbols and try to move them it just creates a new keyframe that they follow. Is there any tool or certian way to select the symbols and/or thier motion paths and move them without creating new key frames?

    Hi,
    There's no direct way of moving all the symbols/ motion tweens begining at different frames altogether, but the following steps should help you do it -
    1. Select a motion path on stage, goto Properties panel > Options menu (top left corner) and enable - Always show Motion Paths.
    2. Enable - Edit Multiple Frames option in the Timeline.
    3. Adjust the frame-markers in Timeline to show all your symbols, motion paths etc.
    4. Now that you see all your symbols and motion paths together, Select-all and Move them together. Or, use Shift + click to selectively select the Motion paths/objects and move them.
    Let me know if you have any doubts..
    Regards,
    Nipun

  • Saving tiff or jpg files within a single, existing psd file without creating new files

         Hi, I just bought CS5 and I wonder if it is possible to save multiple images that are created within a single psd file in jpg or other image file formats without creating new psd files, but rather saving them as "embedded" within the single psd file in whih they are created. For example, one could select a portion of an image that one has created, and save just that selection as a jpg without leaving the existing psd file, and after that, one could select another portion of the same image and save it as a tiff, etc. Is this possible?
    Much thanks.

    No and Yes!
    You can do much of what you want, but not exactly as you described it.  You can certainly make multiple selections and have them saved in the psd file. You can also save jpg version of those selections, but you have to do a little extra work.
    Lets say, by way of example, you have an image and you want to make three different selections within that image, save each selection as a jpeg, and save those selections along with the full image as a psd file. You can do the following, which is just one way of several to proceed, with your image opened.
    1. Make selection 1, hit Ctrl+J to jump that selection to a new layer
    2. Make selection 2, hit Ctrl+J to jump that selection to a new layer
    3. Make selection 3, hit Ctrl+J to jump that selection to a new layer
    4. Alt click on the layer with selection 1. This makes only that layer visible.
    5. Click on Layer > Duplicate Layer > destination New > give it a name
    6. This creates a new (temporary document). Open it.
         click Image > Trim > transparent pixels
         click Save for Web & Devces, select your parameters and save your jpeg
         Close and discard this temporary file.
    7. Repeat steps 4,5 & 6 for selection 2 & selection 3
    8. Save your psd file
    You now have three jpegs and a psd file with all the information to create or modify the original selections
    Paulo

  • How to understand Note1305698 creating new material batch masters data

    Hi, Expert:
    In note 1305698 have below description:
    When creating new material masters for materials subject to batch management and using
    classified batches, it is not possible to create the first batch record in the EWM system. This
    means that, for a material, the first batch is always created in the EWM system and must be
    transferred to the EWM system because this creates the connection between material and class.
    I confused by this statement.
    The first batch record should be created in which system, ERP or EWM?
    The first batch is always created in which system, ERP or EWM?
    BR.

    Hi,
    sorry, that is a typo in the english translation of the note. The original german says: "Dies bedeutet, dass zu einem Material die erste Charge jeweils immer auf ERP-Seite angelegt und an das EWM-System übertragen werden muss, da hierdurch die Verbindung zwischen Material und Klasse angelegt wird."
    (now translated from me): This means that, for a material, the first batch is always created in the ERP system and must be transferred to the EWM system because this creates the connection between material and class.
    I will ask for a correction.
    Best regards
    Juergen

  • How to create new view without interlinking with gantt chart or resource views

    ok clear
    one another question
       In msp how to create new view without interlinking with gantt chart or resource views

    Hi Shiv PMC--
    I splitted your question above in another thread in order not to have  a huge thread with many topics in it.
    That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
    table) or a table with a timephased grid (resource and task usage).
    Please give us more information, maybe with a concrete example so we can help you.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Plz tell how create new id in app store in iphone4 without credit card

    plz tell how create new id in app store in iphone4 without credit card 

    You need to follow the instructions on this page when creating the account : http://support.apple.com/kb/HT2534
    e.g. on a computer's iTunes : https://discussions.apple.com/message/24321860#24321860

  • Blank error message when attempt to create new batch

    I am useing Oracle Applications : 12.1.1 & RDBMS : 11.1.0.7.0
    when I attempt to create new batch for selecting specific Recipe and declaring product quantity in OPM
    Then there generate blank error message. Also I am using automatic document numbering ,But there haven't Generate any document number in the document Number field.
    Plz someone help me.
    Thanks
    Omar Parvez
    Edited by: user13140975 on Sep 5, 2011 1:18 AM

    Plz go following link
    http://www.scrnshots.com/login
    and provide username omarparvez & password 123456
    Thanks & Regards
    Omar Parvez

  • "create new layer without dialog"  redefine shortciut

    Hello.
    A want to redefine default shortcut for command "Create new layer without dialog" but i cannot find this command in shortcut preferences.
    In which section of shortcut preferences, in photoshop cs6, nested this command?
    Thanks.

    I don't believe that is a shortcut that can be redefined per se in the shortcut editor, but you could use a script and assign a keyboard shortcut to the script.
    The following script will make a new layer without the dialog.
    // =======================================================
    var idMk = charIDToTypeID( "Mk  " );
        var desc10 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref9 = new ActionReference();
            var idLyr = charIDToTypeID( "Lyr " );
            ref9.putClass( idLyr );
        desc10.putReference( idnull, ref9 );
    executeAction( idMk, desc10, DialogModes.NO );
    You can copy the above script, paste into Adobe ExtendScript Toolkit CS6 and then save the script to the cs6 Presets>Scripts folder in the photoshop cs6 program/application folder.
    (you can name it whatever you want as long as the extension is .jsx)
    Then when you restart photoshop cs6, it should be listed under File>Scripts and you can use the keyboard shortcut editor to assign a shortcut to the script.
    What operating system are you using?

  • How can i create new apple ID without Payment card ?

    Hello ,,  i'm from libya and here we don't have Payment card's ,, and i need to creat new account and i don't know how ,, can any body Help ..!!
    Thnx

    http://support.apple.com/kb/ht2534

  • How to use second email address as primary email address without creating NEW ID?

    Hello Everyone,
    After TWO long years I am back in Apple Family.. I am loving it.
    I tried Android Galaxy S3 for TWO long years and I feel really good to come back in Apple Family again.
    I don't think so I or anyone from my family will ever go to Android.
    I have a quick question for all the Apple Family members.
    I have an Apple ID on abc@old_domain.com this ID I am no longer using it and I want to use my new ID which is abc@new_domain.com.
    But I DO NOT want to create NEW Apple ID. Because I want to make use of my PAID apps which I bought with abc@old_domain.com APPLE ID two years back.
    How can I do that ?
    Thanks for your help in advance.
    Hemant

    As the long as that email address isn't currently being used as the primary email address on an account (and it's not an alternate or rescue email address on the  old account that you want to use it on), then you should be able to put it as your primary email address by logging into the old iTunes account via the Store > View Account menu option on your computer's iTunes, or by logging into the account via http://appleid.apple.com
    Changing your primary email address : Change your Apple ID.
    Changing the primary email address on an account should not affect any of the account's purchases, as long as the apps are still in the store (and you haven't changed countries since buying them) then you should be able to redownload the via the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes, and the Purchased tab in the App Store app on an iOS device.

  • How to create new Batch No for An Item

    Dear All,
              I am doing Issue for production task through DI API. In that I need to Create a Batch no for an Item. That item was created as Batch with Release only in Item Master. Please help me how to create the batch no when I am Issue for Production ?.
    Thanks,
    lingam.

    Dear Lingam,
    If the process need manual selection as the one you are requesting, it will not be available to DI API. You may try UI API to see.
    Thanks,
    Gordon

  • What is the function code of create new session?

    what is the function code of create new session?
    thanks...

    Hi
    Please put a "/n" (to open a new session after killing the current session)
    or "/o" (to open a new session without killing the current session)
    or "/i" (to end the current session) before the below T Codes as per your requirement...
    <u><b>For more Tcodes check the following</b></u>
    =>smartforms - Smartforms (SAP Form Builder to Create and Adjust Forms)
    =>cmod - Enhancements, User Exits (Project Tool to coordinate changes into projects for the purpose of activating all user exits for a particular project)
    =>sale - ALE Customizing
    =>bale - Distribution Administration (ALE)
    =>wedi - IDOC Type and EDI Basis
    =>shdb - BDC (Transaction Recorder)
    =>lsmw - LSMW
    =>bapi - BAPI
    =>spau - Display Modified DE Objects
    =>spdd - Display Modified DDIC Objects
    =>sara - central idoc archiving
    =>stms - Transport Management System
    =>wedi - IDOC Type and EDI Basis (IDOC Configuration)
    =>bd21 - Analyze change pointers - create IDOC from change pointer
    =>bd10 - Send Material Master
    =>bd12 - Send Customer Master
    =>bd14 - Send Vendor Master
    =>bd50 - Activate Change Pointer for Message Type
    =>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
    =>bd54 - Maintain Logical Systems
    =>bd71 - Distribute Customer Model
    =>bd87 - Process Inbound IDOCs
    =>bd88 - Process Outbound IDOCs
    =>bdm2 - Cross-system IDOC Reporting
    =>bdm7 - ALE Audit - statistical analyses
    =>bdm8 - ALE Audit - sending confirmations
    =>bd61 - Activate Change Pointer generally
    =>bmv0 - Direct Input Data Transfer Administration
    =>rz04 - Operation Mode
    =>rz12 - RFC Server Group Maintenance
    =>sar3 - Archiving object customizing
    =>s001 - SAPoffice Inbox
    =>s010 - Standards Texts (SAP Script)
    =>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
    =>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
    =>se24 - Class Builder (BAPI)
    =>se30 - Runtime Analysis
    =>se36 - LDB
    =>se37 - Function Builder
    =>se38 - ABAP Editor (to modify ABAP programs)
    =>se39 - Split-Screen-Editor
    =>se11 - ABAP Dictionary
    =>se16 - Data Browser (Table contents display)
    =>se41 - Menu Painter
    =>se51 - Screen Painter
    =>se71 - SAPScript Forms
    =>se73 - SAPScript Font Maintenance
    =>se75 - Graphic Objects and Graphic IDs Sapscript Settings
    =>se78 - Administration of Form Graphics (Import Graphics into SAP System)
    =>se80 - Object Navigator
    =>se84 - ABAP Repository Information (search for SAP objects)
    =>se91 - Message Maintenance
    =>se93 - Maintain T codes
    =>su01 - User Maintenance (Security)
    =>su02 - Maintain Authorization Profiles
    =>su03 - Maintain Authorizations
    =>slg1 - Evaluate Application Log
    =>sm12 - Lock Entries
    =>sm21 - System Logs
    =>sm36 - Background Job Scheduling
    =>sm37 - Background Job Monitoring (display batch jobs)
    =>sm31 - Table Maintenance
    =>sm30 - Calling View Maintenance
    =>sm35 - Batch Input Monitoring (Error Logs)
    =>sm50 - Process Overview
    =>sm58 - Transactional RFC Monitoring
    =>sm59 - Maintain RFC Destinations (Define RFC Configuration)
    =>snro - Number Range Objects (for IDOCs)
    =>scc4 - Client Overview (Create, Quick Delete, Modify)
    =>spro - Customizing, Execute Project
    =>sp01 - Spool Administration
    =>sq01 - Maintain SAP Queries
    =>st02 - Buffer Analysis (Status Overview)
    =>st03 - Workflow Analysis
    =>st05 - Performance SQL trace (Tracking the Database calls from the System Transaction and Programs)
    =>st22 - ABAP Dump Analysis, check logical runtime errors
    =>/h - ABAP Debugger
    =>we02 - Display IDOC
    =>we05 - IDOC lists
    =>we07 - IDOC statistics
    =>we12 - Inbound processing of outbound file - convert outbound to inbound file
    =>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
    =>we15 - Outbound IDOC from NAST - message control
    =>we16 - Inbound File
    =>we18 - Generate status file
    =>we19 - Test tool
    =>we20 - Add new Message Type to Partner Profile
    =>we21 - Maintain Port Definition
    =>we30 - IDOC Type development
    =>we31 - IDOC Segment development
    =>we41 - Process Code Outbound
    =>we42 - Process Code Inbound
    =>we46 - IDoc Administration
    =>we47 - Status Code Maintenance
    =>we57 - Assign function module to logical message and IDoc type
    =>we63 - IDOC Type for Parser Output
    =>we82 - Assign IDOC to Message Type
    =>we60 - IDOC Documentation - IDOC Types
    =>we61 - IDOC Documentation - IDOC Record Types
    =>we81 - Create new IDOC Message Types
    =>we82 - Assign IDOC to Message Type
    =>pa20 - Display HR Master Data
    =>pa30 - Maintain HR Master Data
    =>bd59 - Create and assign Filter Object Type for Message Type
    =>bd64 - Maintenance of ALE or any other Distribution Model
    =>db02 - Storage Management and Database Performance
    =>db14 - Database monitor
    =>se18 - BADI definitions
    =>se19 - BADI implementations
    =>fd03 - Accounts Receivable Master Data (Display Customer in Accounting)
    =>me22 - Change Purchase Order
    =>me21 - Create Purchase Order
    =>me51 - Create Purchase Requisition
    <u><b>Official source of SAP T Codes -</b></u>Go to se11 or se16 and view table entries for
    TSTC and TSTCT. This will give you the Transaction List.
    Reward all helpfull answers
    Regards
    Pavan

  • HT5622 my i tunes id is not working......i try to create new id but it requires my visa card info....what should i do

    my i tunes id is not working......i try to create new id but it requires my visa card info....what should i do. how can i get my precious id or how can i create new id without giving visa information. i tried but there is no none option in visa card part

    What do you mean by 'my iTunes id is not working' ? Of you mean that it's disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your iOS deviced by tapping on your id in Settings > Store (Settings > iTunes & App Store on iOS 6+) and then log back in so as to 'refresh' the account on them.
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    If you mean something else ... ?
    In terms of creating a new account, there are instructions on this page for how to create one without giving credit card details : http://support.apple.com/kb/HT2534 - the instructions won't work with existing accounts, and any content that you bought/downloaded with your existing acocunt will remain tied to that existing account.

Maybe you are looking for

  • Key mapping

    Hi All, I have 3 fields in my source file Id,Category (Key Mapping) ,Name. In Import Manager I have mapped Remote Key field with ID . Name with Name category with Category Qualified Range (A 1-10) I have source file like this Id name category 11  10 

  • Problem/Bug in IE7/EM combination

    Good morning, Just as an FYI, When using IE7 Version 7.0.5730.13 and EM (as installed by the download available from Oracle), it is not possible to do a CTAS in the "Create Table" page of EM. This is because the drop down list labeled "Define Using"

  • Show the period value in column header using Text Variable

    We are using Posting Period & Financial Year to calculate YTD & MTD, for current year and previous years. These posting period and financial year characteristics are custom created characteristics we are using due to customer specific requirement. In

  • Problem at the last step in LSMW Direct I/P Method

    Hi all , I am trying to create the ROUTING using LSMW direct input method . After executing the last step (Start Direct Input )  .. I am getting the Following Information as errors .                Data Transfer of Routings via Direct Input          

  • IMessage: waiting for activation/activation unsucessful

    I've recently switched from beta to iOS 7.0.2 and since I've upgraded, my iMessage has stopped working. I've logged in to my apple account receiving the error "Could not sign in" othertimes I'm able to login but my number isn't checked, just my email