Creating subdirs in /run/

Trying to adapt custome build of proftpd to archlinux. Most off all build files are taken from AUR. After installation there is no directory /run/proftpd and because of this proftpd can not start. After creating directory /run/proftpd all is fine but /run is the tmpfs (!). Who will create subdir for proftpd after reboot ?
What is the right way to create directories in /run ?

crondog wrote:This is a job for tmpfiles https://wiki.archlinux.org/index.php/Sy … rary_files
Ok, thanks.
Does the tmpfile.d creates /run/* only on boot time (once) or does it looks for new dirs every time when an service is started ?
I did not tried to reboot the server but after installing new package with correct /usr/lib/tmpfiles.d/proftpd.conf directory /run/proftpd was not created while starting proftpd via systemctl.

Similar Messages

VMM 2012 R2 - Create or Update Run As Account Failure: The specified directory service attribute or value does not exist

VMM 2012R2 UR4 - Version 3.2.7768.0
Not sure when this started happening since I haven't had to update or create a new RunAs account in VMM in some time, but every time I do, either through the console or through PowerShell it throws an error about The specified directory service attribute
or value does not exist. The VMM Service account is the same as it always has been, and other than this issue everything with VMM is working fine. The full text of the error message is below.
I am hoping someone has some ideas because I don't have any more at this point.
------------------- Error Report -------------------
Error report created 12/22/2014 9:43:33 AM
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7768.0
P3(assemblyName)=Microsoft.Cryptography.DKM.dll
P4(assemblyVer)=3.2.7510.0
P5(methodName)=Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys
P6(exceptionType)=System.Runtime.InteropServices.COMException
P7(callstackHash)=d0d2
SCVMM Version=3.2.7768.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7768.0
Executable Name=vmmservice.exe
Executable Version=3.2.7768.0
Base Exception Target Site=140712994535888
Base Exception Assembly name=System.DirectoryServices.dll
Base Exception Method Name=System.DirectoryServices.DirectoryEntry.Bind
Exception Message=The specified directory service attribute or value does not exist.
EIP=0x00007ffa67d15bf8
Build bit-size=64
------------ exceptionObject.ToString() ------------
System.Runtime.InteropServices.COMException (0x8007200A): The specified directory service attribute or value does not exist.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_IsContainer()
   at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
   at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
   at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
   at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
   at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
   at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
--------------- exception.StackTrace ---------------
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_IsContainer()
   at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
   at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
   at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
   at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
   at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
   at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
------------- StackTrace from handler --------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
   at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
   at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
   at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
   at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
-------------------- Assemblies --------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
    Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
    Version=4.0.30319.34014
    BuildType=retail
    Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
    Version=4.0.30319.34003
    BuildType=retail
    Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
    Version=4.0.30319.34230
    BuildType=retail
    Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
    Version=4.0.30319.33440
    Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
    Version=4.0.30319.34230
    BuildType=retail
    Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
    Version=6.3.9600.17090
    BuildType=retail
    Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
    Version=4.0.30319.34230
    BuildType=retail
    Product=Microsoft® .NET Framework
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
    Version=6.3.9600.16384
    BuildType=retail
    Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
WSManAutomation, Version=3.2.7768.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
    Version=4.0.30319.33440
    Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
--------- Extra Data for Watson Report -------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 4356 (0x1104)
Managed Thread ID = 18
Native Thread ID = 5520 (0x1590)
MCITP | VCP4 | VCP5

Hi,
You want userPrincipalName, not userPrincipleName.
http://msdn.microsoft.com/en-us/library/windows/desktop/ms680857%28v=vs.85%29.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

HT4818 I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, it wants me to delete it. If I create it in either Windows or Mac OS X afterwards, I can no longer dual boot.

I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?

I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac.

Planned order created after mrp run instead of purchase req

Hi All,
I am facing a strange problem about planned order being created after mrp run jobs runs in background instead of purchase req. This is happening randomly. In the material master MRP view 2 procurement type is F and in the varient for the MRP job the in Purchase requisition control parmater 1 is marked that is purchase requisition. Also planning file is having the entry once there is shortage and hence MRP run is there always if there is shortage of material.
With Regards
Tarun

Hi Tarun,
Please maintain the control parameters as
Processing Key                                       NETCH
Create Purchase Requisition                          1
Sched. Agreement Schedule Line                   3
Create MRP List                                            1
Planning Mode                                               1
Scheduling                                                     1
Please let me know the results.
Regards,
satyajit

Creating alert at run time

Our current forms use the MESSAGE built-in to display
error messages. When people are doing data entry and a message
comes up, they might hit the enter key as part of their
processing and never see the message. What we want is
an alert-type screen that has more than one button so that
we can place the focus on something other than OK in order
to make it more difficult for them to miss the error message.
Something like this:
while key pressed != 'OK'
loop
display message
end loop
With this scheme they would have to change the focus from the
non-OK button, ensuring that they have seen the message.
An alert would work just fine for this. In order to make
the integration of this new message processing easier we had hoped
to put the creation of the alert and the loop in a .PLL file so
the only change to the application would be to change MESSAGE to
NEW_MESSAGE in the application's code.
I can't find any documentation on creating alerts at run time.
Is there a way to do that, or some other ideas on how to handle
this situation?
The applications run in a noisy environment, so having the
application make a different sound might not work.
null

You just need one alert created in each form, rather you can reference one alert from a template and change the alert text runtime.
Look at set_alert_property.

Create item at run time

hi all
i use oracle database 10g and from 6i (winfows 2000pro).
how can i create items at run time (on my canves)?
thax
Rafeek

Read the following.....
Re: Creating Dynamic Text Item
Greetings....
Sim

Creating executable including run time and drivers windows 7

Hi
Using version 8.5.1 and need to include the runtime version, and drivers for connecting to scope into an executable. Have found so much information on the subject of creating an executable but would like to know if anyone has some step by step for version 8.5.1 to create an executable. Also, has anyone had any issues with drivers and installing/creating exe. while running windows 7.

Hi!
I remember running the compiler at home on Windows 7 64bit using 32bit LabVIEW and I did not have any problems. The exe built just fine.
You have to have your code in a project in order to build an executable. Once you have created a project and included your source files, right click on Build Specifications and choose "New->Application (exe)". Go through each section of the Application (exe) dialog and input the appropriate settings you need.
You can include the runtime and device drivers by creating an Installer. Once you have your executable built, you can right click on Build Specifications and choose "New->Installer". Same thing, go through each part of the dialog box selecting appropriate settings. Under "Additional Installers" you can include NI drivers and the LabVIEW runtime. If you have never done this before, it may ask for you to insert LabVIEW/NI Driver discs so it can include what it needs to for your installer.
My users tend to groan whenever I do this, however, as it creates installers >400MB (which seems silly to them for what appears to be a simple program). Ah well.

How do I sync photo album created in ipad running ios5 to my apple laptop that is running os lion?

How do I sync photo album created in ipad running ios5 to my apple laptop running os lion?

iPad not iPod!

DIM-00019 Cannot Create service (when running DBCA)

DIM-00019 Cannot Create service (when running DBCA)
Hello,
I was trying to install Oracle9i and configure a DB instance (my first try at 9i, to be sure) and everything went ok until I was creating the DB instance. The dbca asked for all the parameters and when it was actually in the process of copying files/creating services it stops with the error
DIM-00019 Create Service Error
Then it tries to continue but another error comes up
ORA-12560: TNS: Protocol Adapter Error.
And then it aborts.
Does anyone know what is going wrong here? I'm trying to install in Windows 2000 Server SP4.
Thanks in advance for any help,
--oswaldo santos.

DIM-00019 Cannot Create service (when running DBCA)
Hello,
I was trying to install Oracle9i and configure a DB instance (my first try at 9i, to be sure) and everything went ok until I was creating the DB instance. The dbca asked for all the parameters and when it was actually in the process of copying files/creating services it stops with the error
DIM-00019 Create Service Error
Then it tries to continue but another error comes up
ORA-12560: TNS: Protocol Adapter Error.
And then it aborts.
Does anyone know what is going wrong here? I'm trying to install in Windows 2000 Server SP4.
Thanks in advance for any help,
--oswaldo santos.

Help to create item at run time

Hi all
Please help to create item at run time
I want to create item at run time
is it Possible ???
thank you

Hi,
As mentioned several times above, you cannot use Forms for displaying dynamic columns. So, you have two options (AFAIK).
1. Create maximum number of items and set their visibility off based on the user input.
2. Create a PJC (may be by extending JTable), and display dynamic columns (i feel it is a bit complicated and not straight forward as it sounds). Here is a [simple howto|http://sheikyerbouti.developpez.com/forms-pjc-bean/first-bean/first_bean.pdf] to build the PJC.
-Arun

Create PDF and run action does not actually run the action after producing the pdf from word

When I select "Create PDF and Run Action" in word it does not actually run the action in Acrobat it just sets the tool, why?

Hi Amerispec,
Thank you for posting on the forums, Please explain the workflow steps along with the version of the Adobe Acrobat and OS you are working on.
thanks,
Vikrantt Singh

Using pages, how can I create a label run from contacts

Using pages, how can I create a label run from contacts?

You mean you want to use XML to create a flat file, right? Not that the database is using XML in some way? If so, why do you want to use XML?

PR created after MRP run, instead of schedule line

Dear all,
I want to create schedule lines automatically from the planning run, for raw material. I have maintained info record, scheduling agreement, quota arrangements and also the source list.
For the raw material, safety stock of 1000 nos. has been maintained. The current stock of the material is 0.
After MRP run, based on the upper level PIRs, schedule lines are generated properly. But, against the safety stock of 1000, a PR is generated.
I donot want a PR to be generated.
Please suggest a solution.
Thanks in advance,
Shrenik
Edited by: Shrenik on Mar 8, 2008 4:17 PM

Dear all,
I checked an found that the schedule agreement date does not have any effect. Even if the requirement date falls outside the date range, i am able to create schedule lines.
I also found that if i maintained GR processing time, then always a PR is created. If GR processing time is 0, then only schedule line is created. Moreover, planned delivery time does not have any effect on the calculations, even if it is 10 days, 20 days or 900 days.
Can someone please clarify all these? How are these times taken into account?
Thanks in advance,
Shrenik
Edited by: Shrenik on Mar 9, 2008 3:04 PM

How to create spool when running a report in background

hi folks,
i am running a bdc report in bkgrnd... and i want all the success and eror messages to be displayed in a spool... plz explain with example as to how this can be achieved .

Hello Nishant,
You could use this sample code to create the spool.
DATA : X_NAME       LIKE TSP03D-NAME,
       X_DEST       LIKE TSP03D-PADEST VALUE 'LOCL',
       X_ROWS       LIKE SXPCKLSTI1-BODY_NUM VALUE 0,
       X_STARTROW   LIKE SXPCKLSTI1-BODY_START VALUE 1,
       X_PAGES      LIKE RSPOTYPE-PAGES VALUE 1,
       X_PAGES_1    TYPE P DECIMALS 2,
       X_RQTITLE    LIKE SXPCKLSTI1-OBJ_DESCR,
       X_RQCOPIES   TYPE I VALUE 1,
       X_RQOWNER    LIKE TRDYSE01CM-USERNAME,
       X_IMMEDIATE LIKE PRI_PARAMS-PRIMM VALUE ' ',
       X_RQID       LIKE TSP01-RQIDENT,
       I_CONTENTS    LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
X_PAGES   = 1.
X_RQOWNER = SY-UNAME.
X_DEST     = 'LOCL'.
X_STARTROW = 1.
X_RQCOPIES = 1.
X_IMMEDIATE = ' ' .
I_CONTENTS-LINE = 'I Got your Childhood PHOTO'.
APPEND I_CONTENTS.
CALL FUNCTION 'RSPO_SX_OUTPUT_TEXTDATA'
EXPORTING
      name                 =   x_name
    DEST                 = X_DEST
    ROWS                 = X_ROWS
    STARTROW             = X_STARTROW
    PAGES                = X_PAGES
    RQTITLE              = X_RQTITLE
    RQCOPIES             = X_RQCOPIES
    RQOWNER              = X_RQOWNER
    IMMEDIATELY          = X_IMMEDIATE
    IMPORTING
    RQID                 = X_RQID
    TABLES
<b>    TEXT_DATA            = I_CONTENTS</b> <b>Your Message Table</b>
    EXCEPTIONS
    NAME_MISSING         = 1
    NAME_TWICE           = 2
    NOT_FOUND            = 3
    ILLEGAL_LAYOUT       = 4
    INTERNAL_ERROR       = 5
    SIZE_MISMATCH        = 6
    OTHERS               = 7.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.      ENDIF.
ENDIF.
WRITE: X_RQID
If useful reward.
Vasanth

Copy BOM Component Characteristic value in material PR created by MRP Run

Dear Gurus,
My requirement is I have materials like thread to maintain color characteristic i have create class - color- class type is 023 , now i want user should able to maintain characteristic value in BOM component (thread) of semifinish material. FG , SFG are not having any characteristic.
Now in PR and PO we can maintain characteristic value in Material Data --->Configuration tab , Configuration tab will come only when there is tick in material is configurable at material basic data 2 view of thread and in CU41 I have to maintain material for class type 300 - Variant , then in class assignment i have select class type 300 and 023 both and maintain class , both are having same characteristic please make me correct if i am doing wrong process, if i am not maintaining class assignment 300 in CU41, in manual PO system not allowing to enter characteristic value in configuration tab . so i maintain both class assignment 300 and 023.
Now for manual PR and PO system showing configuration tab and from PO configuration tab characteristic value is coming in MIGO automatically but when i am running MRP for finish material the auto PR generated by system for material thread is not showing configuration tab in Material Data of PR. I have maintain characteristic value in BOM --->Extra--->Batch Classification. Please guide me how to archive this.
Thanks & Regards
Akshay.

Akshay kukde,
Still i am unable to understand the reason for maintaining a characterstic value for a batch through BOM, I hope you are not changing BOM for every purchase order ?
can you explain what you expect by maintaing this one value for batch characterstic?
you can have many other simple option like
1) Create a material with colour included in it ex, Thread_red, Thread _green etc and use them in BOM
2) Use text in BOM to hold this discription for colour
3) Use batch management, class 023 in material master classification , defalut value for colour, purchase order will be created and while doing GR you can change in colur if its different then default you set earlier.
Akshay kukde wrote:
if i am creating PR Manually -ME51N , system showing configuration tab , where i can maintain characteristic value , which then reflecting in PO and from PO to MIGO
The above scenario I have tried by maintaining class type 023 and same characteristic in material Master. but result is same for auto generate PR by MRP- configuration tab is missing.
My requirement in this case is characteristic value should flow from BOM to PR generated by MRP.
when you manualy create PR you Thread material is consider to be a configurable material and thats why you are able to input configuration value, otherwise as soon as you put this configurable material inside a BOM of normal materila it loost its configuration feature, if you want you can create your parent material also as configurable material, assign same class to it and create configuration profile and take MRP run this time you will get PR with configuration tab as your thread get configuration derived from parent.
Hope above details may help you.
Check and reply, also mark replies helpful if it helps you.
Thanks
Ritesh

Creating subdirs in /run/

Similar Messages

Maybe you are looking for