Creating system in portal for the backend SRM

Dear All,
We are in the process of setting up a system in portal for the backend SRM system
I have tried to create system in System admin--> System configuration --.>System landscape
For SAP Web AS Connection , the parameters maintained are:
Hostname : <FQ hostname>:8000 ( 8000 is the HTTP port for ICM)
Web AS path: /sap/bc/webdynpro
protocol :8000
But test is failing as 'An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall:
test details:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (bhidfwao06.ent.bhicorp.com:8000)
5. The host name bhidfwao06.ent.bhicorp.com was resolved successfully.
6. The Web AS ping service http://bhidfwao06.ent.bhicorp.com:8000/sap/bc/ping was pinged successfully.
7. An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall.
Is there any problem with the port, I doublechecked and the port for HTTP is 8000.
If I give the Web AS path: /sap/bc/bsp test is successful.
Any pointers please?
Regards,
Arun

hi arun,
u may have to activate some more services in sicf
u can follow this link what are the neccesary applicaiton need in sicf
http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
let me know u need any further information
ravindra

Similar Messages

How to create 'system' in Portal for backend

Hi Basis Gurus,
Please let me know how to create a 'system' for a backend system in Portal 'system administration' --> 'system configuration' --> 'system landscape'.
i.e. which properties I need to fill up, assuming the backend system is release 700 ABAP system and Portal is at release 640.
Thanks & Regards,
Kunal.

Hi,
Please check the following links..
[Creating Systems|http://help.sap.com/saphelp_nw70/helpdata/EN/ec/0fe43d19734b5ae10000000a11405a/content.htm]
[Editing Systems|http://help.sap.com/saphelp_nw70/helpdata/EN/42/11e43d19734b5ae10000000a11405a/content.htm]
Regards,
Murthi...

How to creat a Business System and Tech System in SLD for the DB2 DataBase?

Hi,
How to creat a Business System and Tech System in SLD for the DB2 DataBase?
Joseph

Hi,
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Go Through this links..
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
Also try elearning.
https://www.sdn.sap.com/irj/sdn/elearn
Thanks,
Satya Kumar

Creating User in Portal and SAP Backend simultaneously?

Is it possible when you create a new user for the portal (in my case, active Directory is used as central user storage) for SSO, that this user will also be created simultaneously in different SAP Backends without creating it manually everytime? Or is it perhaps possible to connect Active directory to these SAP backends as central user storage, too? My Problem is that everytime I must create manually the users in portal and all belonging SAP backends but I think it's not very comfortable.
Regards,
Frank

Hi Frank,
There are ways to integrate complete User Management where either SAP or the local LDAP (i.e. MS ADS) drive as the central store for users. Ultimately, the CUA concept can be entirely driven by SAP including the MS ADS ID's for the network. It involves a proposal that is uploaded into the ADS which includes the SAP required schema. When populated (or if configured as such) they can be applied as user properties for the backend systems. There is a tool within R/3 called LDAPSYNCH that allows the replication (either direction) of user data.
This concept is referred to as Identity Management. Start at http://service.sap.com/security. Then go to "Security in Detail" ==> "Secure User Access" ==> "Identity Management". There you can find info/docs on the CUA concept within the SAP landscape as well as the integration into the corporate LDAP.
I have seen most customers use separate R/3 backend User Management from the ADS. I assume that this is due to the complexity of adopting a whole new global user management process with existing "cultured" processes. However the SAP systems can support the entire corporate user management driven from within the R/3 core (HR).
I hope that this helps,
Regards,
Judson

External SAP Portal for Bidders in SRM 7.0

Hi All
In the strategic sourcing Business Scenario, we need to enable the bidders to submit their bids from outside the network firewall.
Some questions in this regard:
1) Should we have a separate portal for the bidders ( from the one used by the employees inside the firewall) for security
purpose?? Earlier I had seen a different URL for SAP enterprise portal for external vendors at a client place.However not sure if it is a single Portal instance or two separate ones.
2) Do we need to install a SAP Web dispatcher in the DMZ as suggested by SAP in the SRM 7.0 security guide for the external portal? Could we simply make the Enterprise portal available outside without setting up the DMZ
3) Since portal is role based, the suppliers won't be able to access anything else, then the process bids screen.What are the other security concerns if the same portal is shared between employees and suppliers?
Regards
Kedar

Hi
Bidding always happens in your SRM System, although External partners execute that activity. It really depends on your security policies whether you want to give them http or https access...
Regards
Virender Singh

Does each SAP transaction iview create a log on to the backend ECC?

Hi,
If I put multiple SAP transaction iviews in a role, each pointing to a different SAP transaction in the same backend system, does the launch of each iview create a new logon in the backend system when using SAP logon tickets? If so, is it possible to make it only launch a new session if one logon has already been created?
Regards
Cindy

Hello Cindy,
launching of diffrent Transactio Iview form same back end is quite similar as loged in to backend with Proper credentials and opening diffrent transaction's by useing
/oxx(Transaction Name)
Hope it will add to ur knowladge.
Regards.
Soni Vinit

Is it necessary to create a Billing Plan for the Service Contracts

Hi All,
Is it necessary to create a billing plan for the service contracts.
My requirement.
In CRM 7.0, we created a service contract. For the item in that service contract there is a Billing Plan tab.
In that tab we have the dates for Period, Billing Date etc.
Now our requirement is to get the Billing Date quarterly. For this we created date rules and date profiles and assigned these date profiles to header and item level transactions.
And we are able to see the date rules under the drop down of the billing date.
I copied the standard date rule BILL004 to ZBILL004.
But when we changed to our date rule it is not changing to quarterly date.
Can you please let me know what are the configurations to be done for this.
Is the billing plan has to be created for this kind of scenario.
Thanks in advance
Thanks and Regards,
Raghu

Hi
On OK button's action you can Destroy the window and navigate to Page1.
Go through this link for more details and a step by step guide for creation of pop ups and dialog boxes
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1?quicklink=index&overridelayout=true
Hope it works
Regards
Suresh

Sendgrid addon "The management portal for the add-on isn't available right now. Please try again later"

After adding the Sendgrid Addon, when we go to the "Go to the SendGrid web site for the next steps" link, we get the following error message: "The management portal for the add-on isn't available right now. Please try again later."
Best regards,
Joe Boren

Hi,
If you have successfully purcasedAdd-on SendGrid, but it is not available, I suggest you contact with support, it's the best choice for you.Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/ Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a
support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there (or can I create) a keyboard shortcut for the command "export"?

is there (or can I create) a keyboard shortcut for the command "export"?

Keyboard Shortcuts are created in the System Preferences app, Hardware section, Keyboard, Keyboard Shortcuts tab.
Select Application Shortcuts on the left.
Click the "+" sign on the right and in the dialog box that pops up, enter: "Export..." and your preferred key combination. Here's an example:
Keep in mind that when you enter the name of the action in a layered menu, such as File > Export..., or Share > Export..., you are only going to enter the last menu choice, not the higher levels.
Regards,
Jerry

How to create an alternative bom for the same product

Hi expert,
I want to know how to create an alternative bom for the same product. Can i use the different bom usage to create or use the same bom usage? In addition, how can i use the production version to link the alternative bom for the same product?
Please help me solve the problem.
Thanks in advance for any assistance.
George shi

HI
you can go with t-code CS01
if you have the BOM already and you want to create the alternative BOM then just goto create BOM
and enter the material and plant and uasge system will auto matically prapose the next numner ie, if you have Alt BOM1
then next system will prappose 2.
then you can enter the components as per you requirement
if you go to different BOM usage then sytem will not go for alternative BOM it gives again alt bom 1.
prodcution version you need to craet from mateial master
each version you can go woith alternative BOMS
Version 1 will have alt BOM1
Version 2 can haev ALT BOM2
-ashok

How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe. I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar. How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!! I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
Thanks in advance.
Colin

Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT

Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

Is there a way to create a fade only for the first loop?

I have a loop (Modern Guitar Rock 04), which I've extended out so it repeats four times. I select the Fade Tool and X-Fade for drag. I then drag just in front of the loop and onto it, which creates a fade. However, this also creates fades at the beginning of the repeating loops. Is there a way to create a fade only for the first loop?

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

Creating system in portal for the backend SRM

Similar Messages

Maybe you are looking for