Creating Tabbed Report in SSRS

Hi All,
I am trying to create SSRS report with tabs. Something like this
Tab 1
Tab2
Tab 3
Tab4
Tab5
The end user will input a value which will be passed to all the DataSets (my case each Tab will display some information from a DataSet). So when the user clicks on Tab1, it will display relevant information form DataSet1 and when the user clicks Tab2, it
will hide the Tab1 information and should display the Tab2 information from DataSet2.
I am able to achieve the following:
1. Making the tab clickable
2. Navigating from one tab to another (dispalying relevant information for each Tab) - Using Go to BookMark or Go to Report Option in the Action Property
But I am not able to hide the inactive tab report data. I am building reports and deploying it in SharePoint 2010.
Any suggestions and help would be greatly appreciated!
Thanks!
Maruthu | My Blog

Hi Maruthu,
In your scenario, you can drillthrough to the same report using action property and pass the tab name to it, and then hide or show the tab information base on the parameter's value. The expression below are for your reference.
For the report items that used to display tab1's information:=IIF(Parameters!Name.Value="Tab1",false,true)
For the report items that used to display tab2's information:=IIF(Parameters!Name.Value="Tab2",false,true)
For the report items that used to display tab3's information:=IIF(Parameters!Name.Value="Tab3",false,true)
Reference
Drillthrough Reports (Report Builder and SSRS)
Master Details Report in SSRS 2008
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

How to create a report in excel format having two tab

Hi All,
I have Business requirement where customer wants to create a report in excel format having two tab.
Please let me know if it is possible?
I am using 10.1.4.3.2 version of BIP.
Thanks & Regards,
Edited by: 862749 on May 20, 2013 7:36 PM

I have Business requirement where customer wants to create a report in excel format having two tab.
Can anybody suggest if it is possible in BI Publisher or not?yes
look at excel template
also you can use xsl-xml or xsl-fo template
check it for your requirements

SSRS 2008 Created Commssion Report, now getting error message when I run this ( need Help)

in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error
message when we entered some invoice # see below screen shot of error message
but same time if I enter different invoice # it process the report without any error message , donot understand the problem
what's causing this issue, I have looked each sub report,
can some one suggest any idea,
I have spent hrs to figure it out, no luck so far.
thanks in advance
see the 2nd screen shot with report process
any help will be greatly appreciated

Hi Wendy
thanks for your reply
I tried creating new report , I have 1 main report and 3 sub report on this
on main report when I enter some invoice# and accountnum data shows up with no problem,
but same time if I enter different invoice# and accountnum , there is no data return on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
not pulling for some invoices,
other strange thing , I created this report , year ago, there was no problem until now,
all of the sudden this problem just shows up,'
I am not that expert in sql , can I really use advise
see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
SELECT        VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
                         CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
                         VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
                         VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
                         CUSTINVOICETRANS.INVOICEDATE
FROM            SALESTABLE INNER JOIN
                         CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
INNER JOIN
                         CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
AND
                         CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
                         VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
AND
                         CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
                         LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
                         VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
                         VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
                         VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
WHERE        (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
                         AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2)

Is It Possible to create multiple tab report in OBIEE 11g?

Is It Possible to create multiple tab report in OBIEE 11g?

Triple post even! Multiple tabs in a single OBIEE & https://forums.oracle.com/thread/2560266
Stick to one post!

Hi Folks, I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.

Hi Folks,
I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.
Thanks in advance

i have also tried that but no use can u give me any other way.......

Create subscriptions for Powerview reports like SSRS reports in SharePoint 2010

Hi,
I have created the power view reports in SharePoint 2010 and now I want to create an email subscription for Powerview reports like SSRS reports in SharePoint 2010. Is it possible? If not, is there any workaround?
Thanks,
Suresh.

Hi Suresh:
Unfortunately, you can't setup subscriptions in PowerView like you can on SSRS. I would suggest you to open up a connect item here and request for this feature - http://connect.microsoft.com/SQLServer
Hope this helps.
Faisal Muhammed My Blog

How to create cross tab reports using RAS SDK api with Crystal Reports XI

Hi Everybody,
Iam generating reports in a web-based application with Crystal Reports XI using Report Application Server(RAS) SDK API. The columns in my report exceed that of an A4 sized page. So, when I export that report to pdf, only those columns that fit to a page are showing up. To solve, this problem, I thought of using cross tab. But, I donot know how to generate cross tab report using RAS SDK API. I have tried to get some code from the internet. But, I did not find any java code for that.Can some one give me some sample code.It is very urgent.
Thanks in advance.

Hi,
The easiest way I use is to create the worksheet as regular table and then when i verify the data I get (non aggregate) I duplicate it as a cross tab.
In the duplication wizard I just need to define the axis (using drag and drop).
if you want to create a cross tab from the beginning you need to define that in the new workbook wizard (check the "cross tab" rather then "table"), chose your fields and define the place you want them.
The data point (the center of the cross tab) is aggregated as to your machine definition and will happen automatically.
for example: to find the amount of receipt by months:
On the left put the "Buyer Name", on top put the "Months" and in the data point put the amount.
What you'll get is something like:
months: jan feb mar apr ......
buyer_name
jhon_smith 100 50 30 250 ......
jhon_doe 80 45 90 453 ........
and so on.....

How to create cross tab reports in SAP-MII

how to create cross tab reports in SAP-MII

Hi,
What do you mean by cross-tab reports? Pls elaborate.
MII Transaction has an action block named 'crosstab' that is used to calculate subtotals of data columns.
http://wbhelp.sap.com/manufacturing/xmii_120/en/44/749ea81627053ce10000000a1553f6/content.htm
Is this what, you are looking for?
Best Regards,
Kedar
Edited by: Kedar Shewalkar on Jan 11, 2011 10:40 AM

Creating multiple tab reports using the same query in Web intelligence

Hi All,
I have created a Universe on a BW Query which has fields as below
AGE Depaatment Gender Grade
25       FIN                M            A
27       LES               F            A+
60       SWS            M             A++
Based on this data i have created a WEbi report which shows all of these data under one tab.
Now i create a new report tab in the same Webi Document by right cliicking the existing report and going to inset report and saving it.
Similarly i create two more new report tabs.
in each of these tabs i want to show data only for the concened departments.ie =1st report contains all the departments.
2nd report contains only finance data, third contains only Les data and fourth only SWs Data.
Is it possible to create this report using the same query?
Regards,
Raj.

You should use report filters, not query filters.
A query filter will affect the entire document. Every report tab that pulls data from that query will be impacted. If you start with a single report, by default it shows the data from the query. If you duplicate that report tab, then it's still attached to the first query. There are various ways to create report filters (input controls, quick filter, invoking the filter area from the toolbar) and a report filter impacts only blocks on that report tab. You can even create block filters by clicking on the block first, then creating your filter.
This is a fairly confusing bit for folks that are new to Web Intelligence.

Unable to create cross tab report with multiple level dynamic columns

Hi Gurus,
We are trying to develope group above cross tab report with BI Publisher.
i am unable to achieve multiple level columns dynamically.Using cross tab wizard i can achieve single level measure column ,but not the second level column.
Output should look like this:
Country1
Region1 Region2 Region3 --(level1 column)
d1 d2 d3 d1 d2 d3 d1 d2 d3 -- (level2 column)
Row1 10 20 30 70 80 90 40 70 90 --data
Row2 21 24 54 65 23 64 64 76 87
Here regions and d1 d2 d3 may vary based on xml data.Also we have page break on country.
Thanks,
Mahesh

Hi kavipriya,
Any update on this.I have set the rtf and xml to ur gmail id.
Thanks,
mahesh

How to create interactive reports in SQL Server 2008 R2?

Dear,
I want to create a interactive dashboard in that there is 4 parts and on the selection of one values in one part, detailed value of other part of the report has been changed?
I've tried through Bookmark but this loads complete data in other part of the report. but i just want to load the information of selected record.
Please help to provide the solution for the same.
Thanks in advance.

Hi Anurag,
I have an idea , for your scenario you can use subreport and pass parameter to that subrreport from first part to change the value based on the selection of value from first part.
Suppose in first part you are showing aggregate values department wise and in second part you want to show details of that department which selected by user from the first part so you can create a separate part to show details of department with parameter
department which will filter your report according to department and use this report in second part as sub report and for department parameter map it to the first part so if user will select on values of any department then that department name will be passed
in the parameter of sub report and your sub report will show details of that department.
so in first part go to textbox property and go to action tab and then pass parameter.
some examples to set parameter from main report into sub report:
https://www.katieandemil.com/ssrs-create-subreport-with-parameter-example-tutorial-ssrs-2008-r2?tab=article
http://blog.aditi.com/enterprise_social/how-to-pass-multi-value-parameters-to-sub-reports-in-ssrs/
Thanks!!
Live life with joy and happiness! Avanish

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

Crystal Report Cross Tab Report

In crystal report 2008, i created a cross tab report. Column shows sales order number and rows show item number.
For columns that shows sales order #, I also wanted to show sales person name field right beside it. In cross tab expert, I added the field salesperson name.
However, crystal cross tab shows the sales person at a separate column with duplicate information. I only want to show sales order no. with sales person name under one column. Is there a way to achieve this? Thanks.

This would be a hard job.
Have you tried Pivot Table function in Excel? You can play with it and get some ideas.
Thanks,
Gordon

Cross-Tab Report export to Excel

I have a cross-tab report that I need to export to excel and keep the same formatting. When I export the report the first column is Part # the next is operation #. The report is grouped on Part number, but each part may have multi operation. When I look at the report in Crystal or as a PDF the part # is at the top then each operation is a seperate row that follows. When I export it to excel it works fine but instead of the part # appearing at the top then follow by each operation the part number ends up on the last operation in the list. How can I export this and keep the format the same? by the way I have tried both xls data only and xls 2007 options

Hello Experts,
I also tried to export the CR cross tab report in Excel Data only format.
Also I want to display Row label i.e. my Rows are different dates so I created a text field and named as Date & Time but when export it to Excel Data Only, the date time label appears 1 row above then rest of the columns. It works good while looking on InfoView but export messed it up.
Can you please suggest.

Creating Tabbed Report in SSRS

Similar Messages

Maybe you are looking for