Creating web service system for Visual Composer

Hello,
I seem to have made some changes that made my unable to create web service systems for Visual Composer.
The change I made is in NetWeaver Administration > Configuration > Application Resources > WebServicesFactory, I added the Configuration Property "UseCacheByDefault" with Boolean value = true.
After this, if I create a web service system in Enterprise Portal, the Connection Tests fail. In Visual Composer when I define a web service system, the error I am getting is: "Connector Factory not found for value WebServicesFactory".
I have tried to delete the UseCacheByDefault property I added as well as restart the server but I am still getting the error.
However when I test my web service using the Web Services Navigator, I am not getting any problems. So my guess is the problem lies with the connection factory.
Can anyone help me with this issue?
Thanks.

Hello,
Since creating WS system in the portal resulted with failed connection test, the issue has nothing to do with VC.
I'm just guessing, but try to configure proxy in the J2EE engine.
If that doesn't help I suggest you raise this question in the portal forum.
Best regards,
Shay

Similar Messages

Not able to create Web Service Model in Visual Composer

Hi All,
I am trying to create a Web Service model in VC but I am not able to do so.
When I am clicking on Create button its saying Invalid URL.I have tried a lot of web service URL.
Can any one provide me some valid web service URLs or can anyone tell me what could be the problem.
Sometimes it gives "Bad or missing XML"
Please help
Regards
Roshni
Edited by: Roshni Verma on Jan 15, 2010 3:09 PM

Hi Roshni,
Check the below wiki for web services.
http://wiki.sdn.sap.com/wiki/display/VC/WebservicesforVisual+Composer
Use the web services from www.webservicex.net
Kind Regards
Basheer

Problems with creating web service system

Hello,
I seem to have made some changes that made my unable to create web service systems for EP or Visual Composer.
The change I made is in NetWeaver Administration > Configuration > Application Resources > WebServicesFactory, I added the Configuration Property "UseCacheByDefault" with Boolean value = true.
After this, if I create a web service system in Enterprise Portal, the Connection Tests fail. In Visual Composer when I define a web service system, the error I am getting is: "Connector Factory not found for value WebServicesFactory".
I have tried to delete the UseCacheByDefault property I added as well as restart the server but I am still getting the error.
However when I test my web service using the Web Services Navigator, I am not getting any problems. So my guess is the problem lies with the connection factory.
Can anyone help me with this issue?
Thanks.

Hello,
Since creating WS system in the portal resulted with failed connection test, the issue has nothing to do with VC.
I'm just guessing, but try to configure proxy in the J2EE engine.
If that doesn't help I suggest you raise this question in the portal forum.
Best regards,
Shay

Create web service client for javafx project in netbeans 6.8

I here have a javafx project and need to create a web service client for it (in netbeans 6.8).
However when I right click this project -> new -> web service client -> input wsdl location\package -> finish, it seems that the client code is never generated. This is quite different from what happens when creating web service client for a java project.
Anyone knows how is this happening?

Thanks for your reply.
I did write my own ws client code but I need to create a web proxy based on an appointed wsdl path. That requires me to create a web service client from netbeans 6.8, like what I described in my first post. Unfortunately, it's not behaving like what I imagined it should do for a java project, even the javafx file itself doesn't have any error. The error occurs in package definition line.
package fx;For the definition above, it cannot access java.lang.builtins.
The question now is about the possibility to include javafx file in an non-javafx, say, java project. Any comments?
---Regards.

"invalid web service URL" error for create web service system

Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.

Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams

Create Web Service System using WSDL URL

Hi,
Please help me create a Web Service System.
Following is the test result when I perform Connection Test after creating a system
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Thanks,
Atul

Let me reiterate my problem.
I created the System as following
Creating System's Object:
1) Go to System Administration
2) Go to System Configuration
3) Go to Portal Content on Object Based Navigation Area (Right Side Panel)
Note: For avoiding confusion it is recommended to create a folder in which we are creating System Object.
4) Right Click on Portal Content, select New -> System (from Template)
5) This action will display a new view on right side, now choose Web Service System using WSDL URL radio button from the existing templates. Click Next
6) Give the System Name i.e. System_WS and System Id (which are mandatory fields) incase you want to give any brief notes about the system then give it in Description field. Click Finish.
8) Choose Open the object for editing Click OK.
9) Now to create a Web Service System, we need WSDL URL.
10) There are lots of freely available WSDL files on internet, search for any such WSDL file.
11) In the Properties area of system give the appropriate WSDL URL
12) Choose System alias, from display menu and give alias as System_WS.
This alias name will be the name of Web Service System.
I used the following url
http://soap.amazon.com/schemas2/AmazonWebServices.wsdl
After the system is created,
1) Right click on the created system> open > object
2) Drop down for Display options is changed to Connection Tests from what it shows as object
3) Check the check box for the test name Connection Test for Connectors
4) Result shows that the connection failed. The error message was posted in my first question.
Thanks,
Atul

Data Service System In Visual Composer 7.1

Hello,Experts:
Recently ,i am focusing on the mirgration function of SAP NetWeaver,and visual composer is among them .
In netweaver 2004s enterpise portal ,i have done the system connection between Enterpise Portal and ECC and BW ,and the system alias can be accessed in visual composer .Both the bapi and infocube can be got by the system alias .The Visual Composer Application based on the backend data service is ok .
However ,i have registry the ecc system in CE Portal and its version is SAP Composte Environment SP5 .I can check out the system registry is ok . However ,when i open the Visual Composer on the CE Portal ,i couldnt find the system alias that i have registried .It is blank .Plus,we havent install SLD on the CE Java Server ,and solution manager is put forward to take the place of sld .
Can anybody help me out ? The problem has any relationship with the Enterpise Service Repository ?
Thanks for your help in advance .
Eleanor

Hi Eleanor,
first of all if you want to use SAP BW in Visual Composer for CE then you have to install Enhancement Package 1. SAP BW resp. queries, planning functions and so on is only supported with VC 7.11 (EhP1 for CE). I also recommend you to set up the SLD in your CE system resp. that it works as a "slave SLD" when you have an existing SLD in your landscape. There are wizards available in the NetWeaver Administrator.
Go to http://<host>:<port>/nwa to login into NetWeaver Administrator.
Navigate to Configuraton --> Scenario --> Configuration Wizard and choose the Initial setup of functional unit SLD.
If you want to have access to BAPIs there are two ways to access the system. You can define a portal system object to access the ECC or you can define in NWA a RFC connection to access ECC.
[Maintaining RFC Destinations|http://help.sap.com/saphelp_nwce10/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/frameset.htm]
[Wiki to setup RFC connection|https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc71/rfc+destination]
Hope that helps,
Best Regards,
Marcel

Data Service System In Visual Composer

Hello,Experts:
Recently ,i am focusing on the mirgration function of SAP NetWeaver,and visual composer is among them .
In netweaver 2004s enterpise portal ,i have done the system connection between Enterpise Portal and ECC and BW ,and the system alias can be accessed in visual composer .Both the bapi and infocube can be got by the system alias .The Visual Composer Application based on the backend data service is ok .
However ,i have registry the ecc system in CE Portal and its version is SAP Composte Environment SP5 .I can check out the system registry is ok . However ,when i open the Visual Composer on the CE Portal ,i couldnt find the system alias that i have registried .It is blank .Plus,we havent install SLD on the CE Java Server ,and solution manager is put forward to take the place of sld .
Can anybody help me out ? The problem has any relationship with the Enterpise Service Repository ?
Thanks for your help in advance .
Eleanor

Hi,Govindu
I have read that message already .Thanks for ur help .
However ,i find that there's no VC-Role in CE SP5,and the permission add-in didnt work .Besides ,when i deploy VC component on the EP 6.0 ,i can find these iviews or models at the directory of content administrator->visual composer ,while in the new version ,i havent find the configuration path on the Visual Composer Client,and when i deploy the VC Applications ,it is deployed in the path of webdynpro content management .
and my question is still up in the air .

While creating web service proxy for a basic authentication WSDL getting WsCompile.AbortException

Hi,
I am usingJdeveloper 11.1.2.4
I have to use a basic authetication WSDL in my appllication to call a web service, when I create a webservice cleint and proxy and follwed the wizard after clking finish it throws following error.
The WSDL is created by an exteanl SAP application
com.sun.tools.ws.wscompile.AbortException
at com.sun.tools.ws.wscompile.WsimportTool.generateCode(WsimportTool.java:280)
at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.generateCode(JDevWsimportTool.java:602)
at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.generateCode(JDevWsimportTool.java:443)
at oracle.jdevimpl.webservices.tools.weblogic.WebLogicAdaptor.wsimportGenerateCode(WebLogicAdaptor.java:1020)
at oracle.jdevimpl.webservices.tools.weblogic.WebLogicAdaptor.createProxy(WebLogicAdaptor.java:284)
at oracle.jdeveloper.webservices.tools.WebServiceTools.createProxy(WebServiceTools.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.jdeveloper.webservices.tools.WebServiceTools$1.invoke(WebServiceTools.java:132)
at $Proxy38.createProxy(Unknown Source)
at oracle.jdeveloper.webservices.model.proxy.generator.CreateProxy.createJaxWsProxy(CreateProxy.java:1194)
at oracle.jdeveloper.webservices.model.proxy.generator.CreateProxy.doGeneration(CreateProxy.java:382)
at oracle.jdeveloper.webservices.model.proxy.generator.CreateProxy.action(CreateProxy.java:174)
at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:142)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
Any thing I missed?
Thanks
R. Ramesh

Two comments:
1) The generated proxy looks correct. If you explore the generated code for the InputParams object and the Rowset object, they should represent the incoming and outgoing data structures for your transaction. If not, and if you are returning an XML property type from the transaction, be sure that you have used the "Assign Reference Document" technique to tell MII what the structure of your outgoing document is (there are a few other discussion threads on that topic).
2) Personally, I find it much easier to consume MII services from .NET code using a URL-based technique instead of a SOAP based technique. Invoke the "Runner" servlet (see the documentation) and you'll get an XML document back, that will always be in the MII Rowsets/Rowset/Row format. Also, it is "self describing" because it includes Column metadata information. It is very trivial to load this into a .NET XmlDocument object and parse/process it. In fact, doing a similar approach, I've been able to make MII services appear as ADO.NET tables/stored procedures to .NET code.
Rick

Error creating web service proxy for bpel process in jdev 10.1.3

Hi,
I am trying to create a web service proxy in Jdeveloper 10.1.3, and get the following error:
Element type "fault" is missing required attribute "name"
I have created a fault on one of the operations, and in the .wsdl file there is a name attribute:
<operation name="process">
<fault name="TestError" message="client:TestErrorMessage"/>
</operation>
The fault definition in the .wsdl obtained from the process when you access it over http is somewhat different:
<fault>
<soap:fault name="TestError" use="literal" encodingStyle="" />
</fault>
Any ideas how to workaround this problem?
Toby

Hi Susan,
The WSDL generated by BPEL designer is :
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="EncryptedPasswordTest"
targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema attributeFormDefault="qualified"
               elementFormDefault="qualified"
               targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
               xmlns="http://www.w3.org/2001/XMLSchema">
               <element name="EncryptedPasswordTestProcessRequest">
                    <complexType>
                         <sequence>
                              <element name="username" type="string"/>
                         </sequence>
                    </complexType>
               </element>
               <element name="EncryptedPasswordTestProcessResponse">
                    <complexType>
                         <sequence>
                              <element name="password" type="string"/>
                         </sequence>
                    </complexType>
               </element>
               <element name="EncryptedPasswordTestProcessError">
                    <complexType>
                         <sequence>
                              <element name="code" type="string"/>
                              <element name="description" type="string"/>
                         </sequence>
                    </complexType>
               </element>
          </schema>
     </types>
     
     <message name="EncryptedPasswordTestRequestMessage">
          <part name="payload" element="client:EncryptedPasswordTestProcessRequest"/>
     </message>
     <message name="EncryptedPasswordTestResponseMessage">
          <part name="payload" element="client:EncryptedPasswordTestProcessResponse"/>
     </message>
     <message name="EncryptedPasswordTestErrorMessage">
          <part name="payload" element="client:EncryptedPasswordTestProcessError"/>
     </message>
     
     
     <portType name="EncryptedPasswordTest">
          <operation name="process">
               <input message="client:EncryptedPasswordTestRequestMessage" />
               <output message="client:EncryptedPasswordTestResponseMessage"/>
<fault name="EncryptedPasswordTestError" message="client:EncryptedPasswordTestErrorMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="EncryptedPasswordTest">
          <plnk:role name="EncryptedPasswordTestProvider">
               <plnk:portType name="client:EncryptedPasswordTest"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>
And the WSDL produced when you access the ws endpoint is:
<?xml version="1.0" encoding="UTF-8"?>
<definitions
name="EncryptedPasswordTest"
targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:client="http://xmlns.oracle.com/EncryptedPasswordTest"
>
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="EncryptedPasswordTestProcessRequest">
<complexType>
<sequence>
<element name="username" type="string"/>
</sequence>
</complexType>
</element>
<element name="EncryptedPasswordTestProcessResponse">
<complexType>
<sequence>
<element name="password" type="string"/>
</sequence>
</complexType>
</element>
<element name="EncryptedPasswordTestProcessError">
<complexType>
<sequence>
<element name="code" type="string"/>
<element name="description" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="EncryptedPasswordTestErrorMessage">
<part name="payload" element="tns:EncryptedPasswordTestProcessError"/>
</message>
<message name="EncryptedPasswordTestResponseMessage">
<part name="payload" element="tns:EncryptedPasswordTestProcessResponse"/>
</message>
<message name="EncryptedPasswordTestRequestMessage">
<part name="payload" element="tns:EncryptedPasswordTestProcessRequest"/>
</message>
<portType name="EncryptedPasswordTest">
<operation name="process">
<input message="tns:EncryptedPasswordTestRequestMessage"/>
<output message="tns:EncryptedPasswordTestResponseMessage"/>
<fault name="EncryptedPasswordTestError" message="tns:EncryptedPasswordTestErrorMessage"/>
</operation>
</portType>
<binding name="EncryptedPasswordTestBinding" type="tns:EncryptedPasswordTest">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="process">
<soap:operation style="document" soapAction="process"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault>
<soap:fault name="EncryptedPasswordTestError" use="literal" encodingStyle=""/>
</fault>
</operation>
</binding>
<service name="EncryptedPasswordTest">
<port name="EncryptedPasswordTestPort" binding="tns:EncryptedPasswordTestBinding">
<soap:address location="http://bpel5.lon.domroot.com:7779/orabpel/default/EncryptedPasswordTest/1.0"/>
</port>
</service>
<plnk:partnerLinkType name="EncryptedPasswordTest">
<plnk:role name="EncryptedPasswordTestProvider">
<plnk:portType name="tns:EncryptedPasswordTest"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>

Configuring BI XMLA system for Visual Composer

Hello all,
I am using VC 6.0 patch 4 and want to configure BI XMLA system . I got the document on "How to configure BI JDBC system for VC", but not able to find any help for configuring XMLA system.
Also I have created the system using "com.sap.portal.systems.BIUDI" par file for XMLA, but not able to fill the required parameters properly.
So anyone of u have done this before plz send me the help or document link.Also if u want, u can send me the document on "[email protected]"
Hoping to hear from u soon.
Thanks and Regards,
Amol.

Give the following properties for the system you create using BIUDI par file - XMLA.
Connection Properties:
Data Source Name: <Name of the data source>
Server URL: http://<BW Server:port>/sap/bw/xml/soap/xmla
Statefulness : <can leave it blank>
User Management Properties:
if you do not have SAP Logon Tickets set up then maintain the user mapping field.
I am working with VC 6 Patch 6.
Regards,
Smitha

Web Service System problem in EP 7.0 SP9

Hi.
We used Web Service for VC and CAF.
For this, We created Web Service System and we used SAP Logon Ticket for authentication in EP 7.0 SP08.
After we applied SP09, We got authentication problem in web service system.
From my analysis, I found SAP Logon Ticket is missing for logon method in web service system template.
Web service system template in EP 7.0 SP09 only has "NONE", "USERID/PWD" for logon method.
How can we use SAP Logon Ticket for web Service System ?
Regards, Arnold.

Hi,
it's simple: your portal version does not support IE7. To get it working, upgrade your portal to a supported SP. There is no workaround. The EP heavenly depends on Javascript, and IE7 won't run correctly the JS from SP9.
br,
Tobias

Create adaptive web service model for a web dynpro project

I have been trying to create a new new adaptive web service model for a web dynpro project.I am using the URL of the wsdl file to create the model. I have copied the url link of the wsdl from the overview tab of the web services navigator. The web service works fine when tested through the Netweaver Navigator. This web service has also been used successfully through the Visual Composer. But when I try to create a model for this web service URL, when I click the Next button after entering the URL in the model creation wizard step 4 , I get "Error loading wsdl file. Check error log for details" Given below is the exception recorded in the error log: (Infact, I get this for all wsdl URLs)
!MESSAGE Jun 6, 2007 9:44:59 AM           com.sap.ide.webdynpro.ui.service.ServicesUI          [Thread[main,5,main]] Error: Internal error
   Plugin name: Web Dynpro Model Editor
   Plugin ID : com.sap.ide.webdynpro.modeleditor
   Class      : com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS
   Method     : loadNameSpacesAndModelClasses
   Message    : Cannot load NameSpaces and ModelClasses
Class Path: C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;
java.home: C:\java\j2sdk1.4.2_09
proxyHost:
proxyPort:
nonProxyHosts:
Temporary Directory: C:\DOCUME1\E51914\LOCALS1\Temp\
WSDL URL: http://etcvpcod108:50100/UserService/Config5?wsdl
   Exception : com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL http://etcvpcod108:50100/UserService/Config5?wsdl and service factory configuration {DynamicProxy.ClassPath=C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:\java\j2sdk1.4.2_09, DynamicProxy.TempDir=C:\DOCUME1\E51914\LOCALS1\Temp\, DynamicProxy.INetProxy.Host=}
!STACK 0
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://etcvpcod108:50100/UserService/Config5?wsdl' and service factory configuration '{DynamicProxy.ClassPath=C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:\java\j2sdk1.4.2_09, DynamicProxy.TempDir=C:\DOCUME1\E51914\LOCALS1\Temp\, DynamicProxy.INetProxy.Host=}'
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:371)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:341)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:305)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:315)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS.loadNameSpacesAndModelClasses(PageRenameWS.java:435)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:105)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
     at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
     at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
     at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
     at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
     at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
     at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:149)
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:49)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:71)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:411)
     ... 53 more

Hi Srikanth,
My version was
Version: 7.0.09
Build id: 200608262203
I was able to successfully import the model after I did the following
1. Re intsall Studion (same version , same build)
2. Reset the proxy settings to not use Proxy server
Thanks for looking into it though...
-Lakshmi

How to create Web Service as a source system in BI and configure a DS

Hello,
I was wondering if you can give me the links to information where it is explained how to create Web Service as a source system in BI 7 NW 2004s and also how to create a data source that would read data from that Web Service?
Thanks,
AG

Hi AG.
Please check the following documentation which talk about this questions.
[Creating Web Service Source System|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
[Creating DataSources for WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ec90a315434c5de10000000a155369/frameset.htm]
[Transfering Data Using WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
I hope that I can be helpful.
Thanks,
Walter Oliveira.

Create Web Service Option not available for BAPI Functional Module

Hello Experts
I am trying to create a web service from a standard BAPI functional module referring following document
http://help.sap.com/saphelp_nw04/Helpdata/EN/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
I am facing the same issue as mentioned in this thread (But for me answer is not OK)
Web Service Creation
When I click the FLIGHT Business Object and navigate to the Tools tab, I cannot see Create Web Service option.
Also when I try to start the web service wizard from (SE37 -> BAPI_FLIGHT_GETLIST) Utilities Menu, after specifying all the details, after clicking Finish, I get an error "Access Refused"
I verified the authorization to current user and gave him all the authorization required viz. (SAP_BC_WEBSERVICE_ADMIN, SAP_BC_WEBSERVICE_ADMIN_BIZ, SAP_BC_WEBSERVICE_CONSUMER etc) all 7 of them.
My system is ECC 6.0 700 Release
Thanks
Paresh

Hello,
For creating Web service definition, you have to be a registered developer. In SAP Service Market place, you will get developer access key. This should be entered in DEVACCESS table by creating any development object.
Thanks,
Venu

Creating web service system for Visual Composer

Similar Messages

Maybe you are looking for