Creation of a Custom Folder in Oracle Discoverer Administration Edition

Hi
Could anybody help me in solving this problem while creating a Custom Folder in Oracle Discoverer Administration Edition ?
My Requirement is :
I Connect to EUL_US/EUL_US@<HOST_STRING> under Oracle Discoverer Administration Edition.
I selected a Pre-Defined Business Area Eg. General Ledger
There i created a Custom Folder by Name Test Custom Folder
The Query which i used in my Custom Folder is
SELECT NAME FROM GL.GL_JE_BATCHES
When i Used this Query it says Table or view does not exist.
The Folder is getting created but without a Query.
I am not able to preceed further.
Any Help would be appreciated
Regards
Nakul Venkataraman

Hi Nakul, you may be running into a problem with the sql for your custom folder. For some reason Discoverer Admin will allow you to create a custom folder with sql, but then if you change it and it has any advanced sql, i.e. grouping sets, analytic functions etc., you probably receive an error.
An option is to create a view using the same sql and create a folder from the database using this view.
Hope this helps.
Brent.

Similar Messages

  • Oracle discoverer Administration - Business Areas

    Can anyone tell me if it is possible to install the Oracle discoverer Administration edition for a user, but only with query/view rights on Business Areas ?.
    The user should not be able do make changes , but only to view certain BA : eg : folder links, custom folder queries, properties etc.
    Or is there another way of getting the information regarding the setup for a certain Business Area ?

    Hi,
    It depends what version of Discoverer you are using. If you are using a later version (10g) then you can give the user administration privilege but no privilege to change the EUL (e.g. format business area). Then when the user connects to Disco Administrator they get read only access to the EUL.
    If you are using a previous version then you will have to either write a report off the EUL tables that gives them all the information they need (The Oracle provided EUL Definition Business gives most of this information), or implement your own read only constraints using database triggers.
    Hope that helps,
    Rod West

  • Oracle Discoverer Administrator 11g

    Hi All,
    I want connect Oracle Discoverer Administartor 11g, so please hel[ me where can I download Oracle Discoverer Administrator 11g for Windows version.
    i am able to find oracle doscoverer administrato 10 but not able find 11g software.
    Please suggest.
    Regards,
    Prasad

    Hi,
    Did you check this http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
    Look for Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0
    http://download.oracle.com/otn/nt/middleware/11g/ofm_disco_desktop_win_11.1.1.3.0_disk1_1of1.zip
    Thanks,
    Sutirtha

  • Oracle discoverer Administrator and Desktop 'Invalid Username/Password

    Dear all,
    None of my users can login to Oracle discoverer Administrator and Desktop. It gives invalid username and password. What could be the problem?

    Pl post details of OS, database and Discoverer versions. Is this EUL for an EBS database ? If so, are users checking the "apps user" check box on the login page ?
    HTH
    Srini

  • How do i change password in Oracle Discoverer Administrator??

    My Password has expired, how do i change password in Oracle Discoverer Administrator??
    Thanks in advance ??
    Regards
    Raja Hyderali

    Thanks Michael.
    Metalink (Note:290279.1) suggest the option of changing password, after you logon. I could not find any way of changing the password when it is expired.
    Thanks all for your suggestions.
    Regards,
    Raja Hyderali

  • 9ias 1022 compatability with Discoverer Administration edition

    Hi ...
    I installed 9ias1.0.2.2.0 on 8.1.6 database.
    I AM UNABLE TO CONNECT TO DATABASE through discoverer viewer .
    I installed discoverer Administration edition 4.1.37 separately.
    I installed end user layer tables into my database using
    discoverer Administration edition 4.1.37 .But it was asking for
    4.1.11 End user Layer tables. where can i get the the discoverer
    administration edition version 4.1.11 software .
    In oracle site i seen only 4.1.34 & 4.1.37 version for
    discoverer administration.
    I wouid appreciate any help.
    Regards
    Santhosh

    Ranga,
    The link provided:
    http://otn.oracle.com/software/products/discoverer/content.html
    is for Discoverer Administration 4.1.33f and the EUL tables shipped with it are not the right version that is needed by Discoverer Plus that ships with 9iAS 1.0.2.2. The release notes for 9iAS 1.0.2.2 mention that that the version needed is 4.1.36 or 4.1.37.
    Thanks.
    null

  • 9ias1.0.2.2.0  Compatability with Discoverer Administration Edition

    Hi ...
    I installed 9ias1.0.2.2.0 on 8.1.6 database.
    I AM UNABLE TO CONNECT TO DATABASE through discoverer viewer .
    I installed discoverer Administration edition 4.1.37 separately.
    I installed end user layer tables into my database using
    discoverer Administration edition 4.1.37 .But it was asking for
    4.1.11 End user Layer tables. where can i get the the discoverer
    administration edition version 4.1.11 software .
    In oracle site i seen only 4.1.34 & 4.1.37 version for
    discoverer administration.
    I wouid appreciate any help.
    Regards
    Santhosh

    Ranga,
    The link provided:
    http://otn.oracle.com/software/products/discoverer/content.html
    is for Discoverer Administration 4.1.33f and the EUL tables shipped with it are not the right version that is needed by Discoverer Plus that ships with 9iAS 1.0.2.2. The release notes for 9iAS 1.0.2.2 mention that that the version needed is 4.1.36 or 4.1.37.
    Thanks.
    null

  • Oracle Discoverer Administrator 'OUT OF MEMORY'

    Hi ,
    I'm trying to include a case statement in the custom folder based on a query.when I include the case statement in the SQL query and click Validate SQL button i get error 'out of memory'.
    can anyone plz help me with this.
    thanks

    Hi
    The Out of Memory is not 100% related to the amount of memory you have on your machine. There is an internal cache that it is working with and this is controlled from within your system registry. These settings can be found in [HKEY_CURRENT_USER]\Software\Oracle\Discoverer 10\Application and they are called MaxVirtualDiskMem and MaxVirtualHeapMem and these are typically set to the amount of memory on your PC or even higher where 512000000 equates to 500 MB. I have rarely seen making a change to these have any impact but you can always try.
    As a test, try using the Admin command line interface to do what you want. I have seen exports, as mentioned by Russ, fail using the application but work just fine when called from the command line.
    You seem to be saying when you run the query yet in your question you say running in Discoverer Administrator. You cannot run a query in Administrator so are you saying that you get this issue when running the query in Desktop or in Plus? For Desktop you can try altering the MaxVirtualDiskMem and MaxVirtualHeapMem, whereas for Plus these will have to be changed in the pref.txt for the application server.
    You can also try increang
    Best wishes
    Michael

  • Oracle Discoverer Administrator not installed with FMW 11.1.1.6 on windows 7 64 bit machine

    Hi,
    Recently I install the Oracle FMW 11.1.1.6 with Oracle Forms, Reports and Discoverer , 11g database and RCU successfully on windows7 64bit machine. I can able to access the Forms, Reports, Discoverer Plus and viewer thorugh URl successfully.
    But I'm not able to see the Oracle Discoverer Adminstrator to create the EUL for creating the connection though the Oracle Discoverer Plus it's give me the error "You do not have access to any End User Layer tables".
    I have also run the Repository Creation Utility against 11g R2 database which created a DEV_DISCOVERER schema.
    I don't how to create the End User Layer tables.
    These are the two URl I found after the installation for the discoverer:
       Discoverer Viewer URL: http://localhost:8888/discoverer/viewer
       Discoverer Plus URL    : http://localhost:8888/discoverer/plus
    Thanks in Advance

    Toufic Wakim wrote:
    Did you mean to say 11.1.1.2 and not 11.1.2?
    11.1.2 works fine on Windows 7 (64 bit).
    11.1.1.2 does not support windows 7 (64 bit). 11.1.1.3.01 was released a fews weeks back that supports windows 7 (64 bit).Hi Toufic,
    Yup, i mean hyperion 11.1.2..
    Now, the smartview has been successfully installed in my system. First, i tried to uninstall the my smartview and delete all registry that point to my smartview. and then i tried to re-install the smartview version 11.1.2, and now, it's work.
    Thanks Toufic..
    Regards,
    VieN

  • Refresh EUL in Oracle Discoverer Administrator using command line

    Hi there! I wonder if there is a way of refreshing the EUL business folders of Discoverer Administrator using a command line, so that it could be done through a batch file process.
    Many thanks in advance

    What do you mean by refreshing the EUL business folders? The definitions of the EUL are updated whenever a workbook/worksheet/business area/hierarchy/ any other object inside the EUL is changed/added/deleted. Also, the contents of your EUL are updated whenever summaries are refreshed (either manually or on a schedule), or when scheduled workbooks run and their contents stored inside the EUL.
    Thanks
    Abhinav Agarwal
    Oracle Business Intelligence Product Management

  • Oracle Discoverer  Administrator - Scheduling summaries

    Hi,
    How to schedule three summaries in one job such that one summary is executed after the refresh completion of other (ie. in sequence) which are available in Oracle Discoverer Adminstrator.
    Thanks in advance.

    Hi,
    You can do that way by scheduling through a concurrent manager.For more details go through this links
    Advantages of scheduling a work book through concurrent manager.
    [http://ascbi.com/downloads/Third%20Party%20Documents/Scheduling%20through%20Concurrent%20Manager.pdf]
    Hope this helps you,
    Best Wishes,
    Kranthi.

  • Export workbooks not sharded with the oracle Discoverer Administrator

    Can anyone tell me how to export workbooks which are not shared with the discoverer administrator.
    When I use the command line dis4adm.exe /connect userid/password@db /export destination / workbook "workbookname' it toes only funtion for workbooks shared with the discoverer administrator.
    Any advice will be highly appreciated. Thanks

    Hi Marc
    The only mechanism to export Discoverer workbooks using the 4.1 Administrator tool is to use the command line.
    However, there are severe restrictions on functionality. These are:
    - Only the owner of a workbook can export a workbook. Discoverer administrators do not have the power to export end user workbooks, therefore user accounts need to be temporarily granted administration privileges during the process
    - There is no mechanism to export “ALL” workbooks for a user account. They have to be named explicitly on the command line
    - Workbooks must be exported on a user by user basis because there is no mechanism to export workbooks for multiple users at the same time
    Drop me an email because I have a white paper that explains in detail how to export workbooks in 4.1 using the Administrator tool.
    I hope this helps
    Best wishes
    Michael Armstrong-Smith
    URL: http://learndiscoverer.com
    Blog: http://learndiscoverer.blogspot.com

  • What is Gateway User and password in Oracle Discoverer Administrator

    hi.
    i have install BI tools and want to connect to database. what is Gateway user ID / Password and Foundation Name and what username i give in it and how i can use discoverer desktop.
    plz urgent
    thx

    Hi,
    While in the Tools -> Options -> Connections screen, you'll need to complete the following gateway info, this is usually:
    gateway user id: APPLSYSPUB/PUB
    foundation name: APPS
    You'll also need to ensure you have the correct TNS connection setting defined in your TNS file.
    Hope this helps you get started.
    Lance

  • Importing Custom folder in Discoverer Administrator from One Instance to Another Instance

    Hi all,
    I have created a custom folder XXHR_TEST_FOLDER_OLM in Discoverer Administrator 10.1.2.1 in my test instance. I want to move it to another instance say UAT. First i exported the folder from test instance. File-> Export -> Selected Objects in the End User Layer->Selected Custom folder->Provided Save location and finish. The eex file is created in my local machine. Now I tried to import the same to the UAT instance. File-> Import. It throws me an warning stating
    "A folder named 'XXHR_TEST_FOLDER_OLM' was created or modified during the import but is not in a business area". What am i missing here. Kindly let me know.
    Regards,
    Pradeep

    Vinay,
    For deploying pages to Production instance , you need import these pages with help with oracle.jrad.tools.xml.importer.XMLImporter command. Check old thread in this reference .
    Thanks

  • Custom Folder/ View

    What is the difference between creating a custom folder in an
    discoverer administration tool and a view?
    can i convert a oracel report into a Discoverer report
    (ie) rdf to dis.
    Please help me on this.

    I have only recently started using complex folders in Discoverer though I have been using Discoverer for quite a while. I use Discoverer in a data warehouse with a star schema - huge fact tables connected to a number of much smaller dimension tables. The main difference for me in this environment between a complex folder and a view is that it would be impractical to synthesize the contents of the item drop lists from a view that combines my huge fact table to the dimension tables. This would not work because it would take so long for the database and Discoverer to generate the list.
    On the other hand, list generation from the relatively small dimension tables is highly practical and fast. When I drag an item from a folder of a dimension table, any drop list I created for that item goes with the item into the complex folder. Then, when a person invokes the drop list in Discoverer Client using the complex folder, it is only the small dimension table that is queried to populate the list.
    If you don't use drop lists, then I suppose this would not be an issue for you.

Maybe you are looking for

  • White Screen; Nothing Else

    Installed 10.4.11, last night, and all was fine. This morning my MacBook awoke with no problem but while I was creating a new folder I got the spinning beach ball that I watched for 10 minutes before trying a force quit with no luck. I shut down usin

  • Bit Ordering for Structures in a Union

    Hello.  I seem to be having a problem with interpreting data placed into a char array that is overlayed with a structure.  It seems to be related to bit ordering.  The overall scope of my application is to take a data packet, send it over a serial co

  • Can't get the content div to extend beneath the last div

    Once again, I seek help for my site www.acemon.com I can't get .content to extend below the last div. When you look at the site, you can see the last box (titled "for realtors") is surrounded by the .container color instead of the .content color.

  • Flash content flashing and crashing mac

    Hello, Since the latest FF and Flash update (37 and 17) I can't watch any videos or flash content - like (annoying ad) banners. Everything literally FLASHES. Like a strobe light. Then videos get stuck, the cursor jumps/freezes, sound stutters and eve

  • Location of jar file for com.sapportals.wcm.service.IService

    Hi, Can somebody tell me that from where can I get the jar file for <b>com.sapportals.wcm.service.IService</b> Regards, Manish