Creation of a table..

Hi,
Could anyone please tell me what is a table and how to create a table? For suppose if i want to create an employee table, what all the necessary information required to create it? How can i proceed?
Thanks.

Geetha,
Please go thru the link below:
http://help.sap.com/saphelp_nw04s/helpdata/en/25/5dada4ae209e4287a7d761b2254270/frameset.htm.
It has the step by step procedure..
Regards,
Gattu

Similar Messages

Creation of internal table dynamically based on the Date Range entered

Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram Kandula

Hi Sivaram,
 I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
 ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
 ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = gt_fCAT1
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
 create data new_line like line of <dyn_table>.
 assign new_line->* to <dyn_wa>.
select vbeln
 fkart
 vkorg
 vtweg
 fkdat
 spart
 fksto
 from vbrk
 client specified
 into table gt_vbrk
 where mandt = sy-mandt
 and fkart in ('ZF5','ZFR')
 and vkorg = '1100'
 and vtweg = '20'
 and fkdat in s_fkdat
 and spart = '06'
 and fksto = ' '.
 if gt_vbrk[] is not initial.
select vbeln
 fkimg
 prsdt
 netwr
 matnr
 arktx
 werks
 mwsbp
 from vbrp
 client specified
 into table gt_vbrp
 for all entries in gt_vbrk
 where vbeln = gt_vbrk-vbeln
 and werks in s_werks
 and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
 name1(3) type c,
 s_month type string,
 s_month1 type string,
 s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
 loop at gt_vbrp into gs_vbrp.
 gs_final2-matnr = gs_vbrp-matnr.
 gs_final2-arktx = gs_vbrp-arktx.
 gs_final2-fkimg = gs_vbrp-fkimg.
 lv_month1 = gs_vbrp-prsdt.
 read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
 if sy-subrc eq 0.
 name1 = wa_t247-ltx.
 endif.
 concatenate name1
 lv_month1(4) into s_month SEPARATED BY '_' .
 CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
 CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
 gs_final2-month = s_month.
 lv_netwr1 = gs_vbrp-netwr.
 lv_mwsbp1 = gs_vbrp-mwsbp.
 gs_final2-MONTH_QTY = S_MONTH1.
 GS_FINAL2-MONTH_VAL = S_MONTH2.
 gs_final2-value = lv_netwr1 + lv_mwsbp1.
 append gs_final2 to gt_final2.
 clear: gs_final2. "lv_name2.
 endloop.
 if gt_final2[] is not initial.
 sort gt_final2 by matnr month ascending .
 loop at gt_final2 into gs_final2.
 gs_final2_01 = gs_final2.
 collect gs_final2_01 into gt_final2_01.
 endloop.
 endif.
 ENDIF..
Regards
Ankur

Creation of condition table without copy

During creation of Condition table ( without copying any condition from available tables), Is it possible to see all field catalouges available? and if possible then how can we see all fields available to add desired ones into our table?

Hi,
SPRO >Sales and Distribution->Basic Functions>Pricing>Pricing Control-->Define Condition Tables
In the above menu path you can find out the Field catalog what SAP has given if you want to add new field you can add provided
If you done the Enhancements
Regards,
Prasanna

CREATION OF CUSTOM TABLES

hi
I AM TRYING TO CREATE A CUSTOM IN ABAP
I followed the following procedure
SE11
SPCIFIED THE CUSTOM TABLE NAME
CLICKED ON CREATE BUTTON
THEN SPECIFIED SHORT DESCRIPTION
For Delivery Class I specified as C
For DataBrowser and Table variant I specified as Display and Maintenance allowed
Once I click on save before specifying other properties I see the following error displayed
"RFC system error for destination GTADIR_SERVER"
Thanks in advance

Hi,
once again try like this.
Steps to Creating domains, Data Elements, Tables
To give you the steps for creating table:.
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
Well, this is the information I have.
Regards,
satish.

Error Message: Creation of Temporary Table "#BIMC_SETS" not possible

Hello,
I am trying to get data from HANA Virtual Data Model (VDM) from MDX connection in MS Excel. The VDM Views and models are visitble after the connection is successfully made.
But when I try to fetch the data, I get the following error:
"Creation of Temporary Table "BIMC_SETS" is not possible".
Can someone let me know how to resolve this?
Best regards,
Akhil

Hi Lars,
I am getting the same error. We are trying to build a role for Adhoc reporting. The role has analytic privilege, object privilege with select on individual models in _SYS_BIC (models we want to expose and part of AP), object privilege on _SYS_BI with select and execute and also object privilege execute on REPOSITORY_REST.
I am able to execute the models using Lumira and Analysis for excel, however getting error with MDX connection.
Also we want to try and restrict direct ODBC access to HANA using query from excel. With the above privileges user is able to see all the M_ views and get data for it. Can we restrict this?
We are on SP6 rev 67.
Thanks,
Aamod

Creation of Database table using function module DB_CREATE_TABLE

I used the function module DB_CREATE_TABLE to create a database table from a report program.
The SY-SUBRC value being returned is 0 but I am not able to access the table using SE11(that is if it gets created). Kindly let me know if you know how to resolve this problem.
Is there any other function module to create a database table from a report program?
Thanks & Regards,
Pranjali

Hello,
Check this programs how they are using the this FM.
LSDB3U14
LSDB6U04                               DD: Creation of temporary tables (only keys or complete)
LSMC2F00                               Procedures for Creating and Deleting Dependent Matchcode ID Objects
LSUGXU08
LSUGXU18                             Rückgabe aller DB-spezifischen Parameter der Freiplatzprüfung im Upgra
RCNV0002                               DD: Convert CDHDR and CDPOS
RDDMV4TB                               Generate Exchange TADIR
RDDMVCUA                               Generate Exchange TADIR
RDDMVFTX                               Repository Switch: Generate New Empty Clone Table DDFTX
RDDMVNTB                               Filling the Exchange Nametabs (DDYTT, DDYTF)
RDDMVTRE                               Generate Exchange TADIR
RSINFINI                               INFORMIX Performance Monitor: Additional DB Definitions for SAP R/3
RTXWCF1F                               Include LTXW4F01

Is there any library support the creation of spreadsheet table?

Is there any library support the creation of spreadsheet table?

Hi,
TableItem is a supported UI-component of Mobile Visual Designer of NetBeans Mobility Pack. Ready to use!
NetBeans Mobility Pack is the integrated Sun Wireless Toolkit 8an excellent "emulator") in the NetBeans high performance IDE. It simply increases the developer productivity.
bye,
Asghar

How to import Filenames and File creation Date into Table..

Hi Folks,
I am importing Differennt Excels Files into table. my require ment is after importing completed I need to insert all these Filenames ,File creation date into table. (for Auditing).
Can you please give me any ideas or reference link. Thanks In Advance.

Hi Folks,
I am importing Differennt Excels Files into table. my require ment is after importing completed I need to insert all these Filenames ,File creation date into table. (for Auditing).
Can you please give me any ideas or reference link. Thanks In Advance.
You can also prepare dir command and then exeucte it by using XP_CMDSHELL. This gives you file name, modified date, creation date information.
Please refer:
https://sqljourney.wordpress.com/2010/06/08/get-list-of-files-from-a-windows-directory-to-sql-server/
https://hernandezpaul.wordpress.com/2013/02/15/store-file-names-and-modified-dates-in-a-table-without-a-foreach-loop-task-sql-server-ssis/
Cheers,
Vaibhav Chaudhari
[MCP],
[MCTS], [MCSA-SQL2012]

Creation of New Table for Delivery Output Type.

Hi Guys,
I need to replace an existing table by creating a new Table in the existing Access Sequence with the combination of "Ship to Party/Product Hierarchy".
Logistics>Shipping>basic Shipping functions>Output determination>Maintain Condition Tables-->maintain output condition table for deliveries.
I am choosing a new table by the name 902, but i am not getting the field " PRODH Product Hierarchy" on the right hand side to choose from.
I checked the field catelog also. Firstly the field catelog was also not having the field, and then i added the field in it by choosing new entries.
I guess i am missing some step in between, thats why the new field (PRODH) is not showing on the right hand side while creation of the condition table.
One more thing, when i am seeing the Field Catelog, i am able to see a very large number of fields, then why only a few are appearing during creation of a new table??????
Can you guys correct me and let me find a way.????
Thanks very much indeed.
Regards,
Vivek

Hi If u have already the field in FC u can add with new entries .
Try with ,enter t- code SE11, enter KOMB- it will ask for access key get from basis and add u r Field catalog
Field catalog for condition key: output determination
If at all u want a new field tao add to u r FC u Can try with userexit.
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields.
 The fields which are not in either of the two tables KOMK and KOMP
cannot be used in pricing .Sometimes a need arises when the pricing
is to be based on some other criteria which is not present in the form of fields in either of the two tables.
This problem can be solved by using USEREXITS which are provided for pricing in SD.
Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP
program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely
created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that
has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose
includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
Message was edited by:
 SHESAGIRI GEDILA

Issue with creation of ADF Table from ADF Tree selection

Hi,
Following is the usecase.
I've created ParentVO & ChildVO from a single table with view criteria to filter the nodes.And then created two View links ParentToChild & ChildToChild.
Added VOs & corresponding ViewLinks to ApplicationModule. It's got created hierarchy as Parent1->Child1->Chiled2 in Data model section of AM.So Iam done with tree creation process in Model.
As VC can't be applied for sub levels. In order to set the VCs for sublevels, followed the below approach.
Created a bind variable for tree. I've set the VC for both parent & child VOs in managed bean before setting the tree variable in setTree method. So now Iam able to display the required tree in UI with applying VCs.
Now , I can select the required nodes from tree and then click on command button to display the selection list as a table.
In order to achieve this, I tried below two options.
1) Created separate Child VO instance (Child3) from Child VO and applied same view which applied initially. and the dragged the Child3 from Datacontrol to UI(jsff) as a table. When I run the application,it's displaying all the records from the DB table without applying VCs.
2) Dragged the Child2 as a table on UI. When I run the application, it's displaying first record from the table without applying VC.
But no luck in getting the required functionality.
I've Following queries.
a) If we update any transient attribute value for an VO instance, will it effect at VO level or only for that particular instance?
Why because, I've created new instance of same VO. But the changes are not effecting for transient attributes in the new instance of VO.
b) Can some one suggest on my usecase to display the selected nodes from a tree in table format?
I tried my level best to explain the usecase. But let me know,if you have any queries on my usecase.
Thanks in advance,
Samba.

This is my code:
<af:column id="c1" headerText="Sponsor Status">
<af:selectOneChoice label="Label 2" id="soc1" value="#{row1.sponsorStatusDesc}"
validator="#{backingBeanScope.EditSponsorDetails.OnSponsorStatusChange}"
valuePassThru="true">
<f:selectItems value="#{pageFlowScope.confLists.spStatus}"
id="si1"/>
</af:selectOneChoice>
</af:column>
and this i what HTML code says..
<select id="confSponsor:r2:0:tbIEEEsp:0:soc1::content" class="x2h" name="confSponsor:r2:0:tbIEEEsp:0:soc1">
<option _adftmpopt="t" value="" title=""></option>
<option value="4" title="Approved">Approved</option>
<option value="3" title="Declined">Declined</option>
<option value="6" title="New">New</option>
<option value="2" title="Not Valid">Not Valid</option>
<option value="5" title="On Hold">On Hold</option>
<option value="1" title="Pending Approval">Pending Approval</option>
<option value="7" title="Unidentified">Unidentified</option>
</select>
Stll i cannot see any value populated in SelectOneChoice

Creation of new table with attributes of another ??

how can i create a new table which has the same attributes as another ? Please note that the records/tuples in the already existing table shouldn't be copied into the new table.
Illustration:
Table Employee_Details with attributes/fields Name and IDno is present.
A new table Supervisor should have the same attributes/fields Name and IDno.
But the data in Employee_Details table shouldn't be copied into this table (Supervisor).
Can anyone write a query in SQL that does the same i.e. use the attributes of another table during the creation of a new one?
Also can anyone explain why the following query is erroneous ?
sql> create table supervisor as (desc employee_details);
Thanks for your help!

create table new_table as select * from old_table
where 0=1;This statement doesn't create the new_table in the same tablespace than old_table... to take for example only the tablespace, but that's right for storage clause too.
Assuming TITI is my old table, and TOTO my new table :
SQL> show user
USER is "H89UCBAC"
SQL> select default_tablespace from dba_users where username='H89UCBAC';
DEFAULT_TABLESPACE
PSDEFAULT
SQL> create table titi(coltiti number) tablespace tools;
Table created.
SQL> create table toto as select * from titi;
Table created.
SQL> ed
Wrote file afiedt.buf
1* select table_name,tablespace_name from dba_tables where table_name in ('TITI','TOTO')
SQL> /
TABLE_NAME                     TABLESPACE_NAME
TOTO                           PSDEFAULT
TITI                           TOOLS
SQL>   1* select replace(dbms_metadata.get_ddl('TABLE','TITI'),'TITI','TOTO') from dual
SQL> /
REPLACE(DBMS_METADATA.GET_DDL('TABLE','TITI'),'TITI','TOTO')
CREATE TABLE "H89UCBAC"."TOTO"
   (    "COLTOTO" NUMBER
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 65536 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "TOOLS"
SQL> drop table toto;
Table dropped.
SQL> CREATE TABLE "H89UCBAC"."TOTO"
2   (    "COLTOTO" NUMBER
3   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
4 STORAGE(INITIAL 65536 NEXT 65536 MINEXTENTS 1 MAXEXTENTS 2147483645
5 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
6 TABLESPACE "TOOLS"
7 /
Table created.
SQL> select table_name,tablespace_name from dba_tables where table_name in ('TITI','TOTO');
TABLE_NAME                     TABLESPACE_NAME
TITI                           TOOLS
TOTO                           TOOLS
SQL> HTH,
Nicolas.
Message was edited by:
N. Gasparotto

Creation of External table by using XML files.

I am in the process of loading of XML file data into the database table. I want to use the External Table feature for this loading. Though we have the external table feature with Plain/text file, is there any process of XML file data loading into the Database table by using External table?
I am using Oracle 9i.
Appreciate your responses.
Regards
Edited by: user652422 on Dec 16, 2008 11:00 PM

Hi,
The XML file which U posted is working fine and that proved that external table can be created by using xml files.
Now My problem is that I have xml files which is not as the book.xml, my xml file is having some diff format. below is the extracts of the file ...
<?xml version="1.0" encoding="UTF-8" ?>
- <PM-History deviceIP="172.20.7.50">
<Error Reason="" />
- <Interface IntfName="otu2-1-10B-3">
- <TS Type="15-MIN">
<Error Reason="" />
- <PM-counters TimeStamp="02/13/2008:12:15">
<Item Name="BBE-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="BBE-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="ES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="ES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="CSES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="CSES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="UAS-S" Direction="Received" Validity="ADJ" Value="135" />
<Item Name="UAS-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SEF-S" Direction="Received" Validity="ADJ" Value="135" />
</PM-counters>
<PM-counters TimeStamp="03/26/2008:12:30">
<Item Name="BBE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="BBE-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="ES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="ES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="SES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="SES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="CSES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="CSES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="UAS" Direction="Received" Validity="OFF" Value="0" />
<Item Name="UAS-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="PSC" Direction="Received" Validity="OFF" Value="0" />
</PM-counters>
</TS>
</Interface>
</PM-History>
My problem is the Item Name and Direction the value of both(ex PSCReceived or UASReceived) will be treated as the coulmn name of the table and '0' would be the value of that column. I am confused how to create the external table creation program for that.
I would really appreciate your responses.
Regards

Dynamic Creation of Data Tables and Fields

Hello all. I am currently working with a system that contains a bunch of windows. These windows are divided into two groups that represent their presentation style: Columns (such as a table) and Free (such as in a form). I created two tables in database to describe each and every window. These tables describe the type of presentation style, the fields of each window (title of the field, size of the field, position in window, and many more...)
I did this to make the creation of the windows more effective. In this way that I have, I only have to make one window to display all the thousands of windows that I have in my database because the values of presentation are taken from the description in the tables.
I was able to do this through TextFields and JTables in Swing. But now I run into JSC. Is this possible with JSC? Say in case the presentation style of the window is Column, can I tell the data table to go read the description of the window that needs to be opened to obtain the amount of columns, the column names, the size of each column... then create the tables and present the values?
Or say the presentation style is Free... I need to go find how many fields need to be created and their positions in the form, and then the titles of each field. Any ideas how this can be performed?
Thank you.
Franklin Angulo

>
I was able to do this through TextFields and JTables
in Swing. But now I run into JSC. Is this possible
with JSC? Say in case the presentation style of the
window is Column, can I tell the data table to go
read the description of the window that needs to be
opened to obtain the amount of columns, the column
names, the size of each column... then create the
tables and present the values?
Or say the presentation style is Free... I need to go
find how many fields need to be created and their
positions in the form, and then the titles of each
field. Any ideas how this can be performed?
Creator won't help you with the graphical design, but it's definitely possible to dynamically compose the set of components that are children of a particular component. Doing so leverages the basic component APIs of JSF (javax.faces.component.UIComponent), so you'll want to grab yourself a copy of the JSF Javadocs (or use Creator's lookup facilities as you type your code) to understand what's possible.
The most important detail is that all components have a getChildren() method that returns a java.util.List of the child components for that component (as well as a getParent() to get the parent component). Any manipulation you do on this returned list is reflected in the structure of the overal component tree.
As a simple example, assume you want to add an input text component as a child of the form. You'd do something like this:
HtmlInputText input = new HtmlInputText();
input.setXxx(..); // Set properties as needed
form1.getChildren().add(input); // add new childCraig McClanahan

Index creation in BKPF table

Hello Gurus,
I have a bad performance in IDCP transaction, i read the sap note 511819 and this recommend create an index in BKPF table with fields:
'MANDT'
'BUKRS'
'XBLNR'
But i see in the system the table have an index with fields:
MANDT
BUKRS
BSTAT
XBLNR
Is necessary the index creation if already exists one index with this fields?
The table have 150 million rows and 9 indexes.
What is your suggestion?
Best regards,
Ernesto Castro.

HI,
If you have already index 001 with MANDT BUKRS BSTAT XBLNR
fields than it's not necessary to create another index with MANDT BUKRS XBLNR fields.
you need to create index 001 on following table only as described in note.
table : VBRK fields : MANDT XBLNR
table : LIKP fields: MANDT XBLNR
also activate this index only during the least critical time ( when maximum free resources available )
regards,
kaushal

Problem in creation of Nested Table

Hi Everyone,
I have applied thisexample for creating nested tables but at the end I got the message of invalid datatype
current_address full_mailing_address_type,
ERROR at line 4:
ORA-00902: invalid datatype
http://www.praetoriate.com/oracle_tips_nested_tables.htm
Please help me out.....
Message was edited by:
Dharmendra

What is the output for
select * from user_types
?

Creation of SAP Table in SE11

Hi!
I am facing with the problem of hanging SPAM patch (SAPKB13 - 16).
The patch will be stopped in the phase IMPORT_PROPER (step: DDIC activation) after few seconds.
The error is:
SPAM
IMPORT_PROPER
Reason: TP_STEP_FAILURE
Return-code: 0008
Error message: OCS package SAPKB70013, step "A", return code 0008
I looked into SPAM - Goto - Import Logs - Queue and found the following:
ABAP Dictinary Activaiton endes with return code 8.
Table SI_WD_FIRST_MAIN_SCREEN could not be activated
Question:
Is it possible to create the table SI_WD_FIRST_MAIN_SCREEN by my own in tcode SE11?
Thank you very much!
Thom

Hi!
The problem in DDIC ACTIVATION is due to fact that I created a
queue including SAPKB70013 and SAPKB70014 and spam reached MAIN
IMPORT phase.
SI_WD_FIRST_MAIN_SCREEN is deleted in sp14
Then, the queue was reset (I suppose) and only SAPKB70013 was imported
manually in the system.
How can the problem be solved?
Thank you very much!
regads
Thom

Creation of a table..

Similar Messages

Maybe you are looking for