Creation of Blank CR for MDG-S
Hi
I need to need blank CR (Without proving any value for Mandetory fields also but with CR Description and Attachment).
For this I selected BP Role BBP000 and assigned to Vendor Account Group 0001 .We are using Vendor Like UI with template WS5310044.
I do custimation in Configure Properties of Change Request Step for Step 00 as per below
So every error message converts to warning message and I can able to submit CR as Reqestor.
Here are few questions
Is it possible to make Account Group field as optional in Vendor Like UI? so that requestor need to provide only CR description with attachment only.
Even if requestor provides Account Group as 0001 then I can see error messages converted into warning messages as per below
But when requestor selects attachment tab to attach file all warnig messages are converted back into error errors as per below
How to achive this in this case?
Hi Sanjay,
May be you should approach in the following way:
May be you should try to create a new implementation for the UI Badi USMD_UI_EVENT2 for the method IF_EX_USMD_UI_EVENT2~MODIFY_VIEW and with in the signature of the method you have an exporting parameter ET_PROPERTY which is a structure try to clear the value required and check to make it as optional.
Once you define a implementation for UI BADI the remaining things are achievable. by above mentioned configurations.
Regards,
Pavan
Similar Messages
-
Setting visible lines and blank rows for all users
At Item Level for Shopping Cart, Confirmation and Invoice Creation there are settings for Number of Visible Rows and Number of Blank Lines (In Settings/Advanced Settings).
How can this be changed for all users?Hi
This is a user specific settings to be performed. in SRM 7.0
Please prepare a document and educate the user to do. This is the best solution
Second Solution
In Setting tabs there are two tabs -Basic Setting and Advance Setting
check the webdynpro components and hide this for all users
Regards
G.Ganesh Kumar -
Blank rows for every combination
I've got a dimension with this hierarchy of levels A | B | C where all of them are a detail of the previous one.
When I look into the dimension table I get:
A1
A2
A1 B1
A1 B2
A1 B1 C1
A1 B1 C2
etc.
If, in Oracle Answers, I pick up attributes from B and C in the same report, then a record is showed for every combination of B and C with blank attributes for C.
Table B
B1
B2
Table C
C1
C2
C3
The output in Oracle Answers is:
B1 C1
B1 Null
B1 C2
B1 Null
B1 C3
B1 Null
and so on ...
Every row of table B is combined with a row of C and another one with all of its atributtes null.
Any hint?Nihar
To get the first two rows from each group, you could do this:
Use the ROW_NUMBER() analytic function (see http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions137.htm#i86310)
Now, your question isn't clear what you mean by "last" two rows. Last in what order? Whatever it is, you can use the ORDER BY part of the ROW_NUMBER() function to specify the ordering, and reverse it using DESC - for example:
select acn, adate, cost, appl from (
select acn, adate, cost, appl,
row_number() over (partition by acn order by adate desc) as rn
from acntab
where rn <= 2
order by acn, rnHTH
Regards Nigel -
In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!
settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414 -
SAP is allowing the creation of PO's for C.codes for non extended vendors
Hi Gurus
SAP is allowing the creation of purchase orders for company codes to which the vendor has not been extended. An example is PO 4500XXYYZZ for vendor number 9010577. The PO was created for company code 1111, but the vendor is not extended to company code 1111.
Please suggest how to avoid the above transaction by throwing an error.
Thanks
SadaYes, this is SAP Standard Behaviour Only. System Will check Whether the Vendor Hasbeen Maintained at Purchase Orgn Level during Purchase Order Creation.
During MIRO only System check whether the Vendor is Maintained at Company Code level or not Else it will not allow to Post Invoice.
You can Control this by Restricting Users to Use MK01 and Give Access to XK01
Else Use the Following Enhancement :
MM06E004 EXIT_SAPMM06E_004
Contact your abaper and Fulfil your Requirement. -
Creation of material Documents for RMPM adjustments using BAPI
Hi
can any one help me Creation of material Documents for RMPM adjustments using BAPI...
i should be grateful to you...
advance thank you
with regards
venkatYou can check MB_CREATE_GOODS_MOVEMENT which has mkpf as inporting parameter.
-
Hello,
I have created a ECATT for master data uploading. This created a request number. Now when I am trying to create a BC set using tcode SCPR3 and attaching the above created request it is giving me the following error:-
Message Number: S_CUS_IMG_ACTIVITY230
Diagnosis
Logical object ECAT is a lockable (TADIR-mandatory) object.
System Response
Lockable objects cannot be included in BC sets because, during the activation process, an entry would have to be written in the catalog of repository objects (table TADIR). However, this is not possible with BC sets.
Procedure
The object cannot be used in BC sets.
Kindly guide me as to how do i resolve this error and attach my Ecatt request in the BC set.
Narendra
Creation of BC set for ECATTHi,
Check if this process helps u.
Procedure
Aassign existing preconfiguration, transactions or rReports
1. Go to the structure element to which you want to assign preconfiguration, in the project structure.
2. Choose BC Set, CATT, eCATT Test Configuration, Transaction, Program or Add-On Transport Request, in the Type column.
3. If it is not a process step, enter a component from the possible entries help in the Component field.
4. Make an entry in the Object column, or choose from the possible entries help for the Object field.
5. Save your entries.
Assign IMG objects
1. Go to the structure element in the reference structure to which you want to assign an IMG object.
2. Choose IMG Object in the Type field.
3. If it is not a process step, enter a component from the possible entries help in the Component field.
4. Call the possible entries help for the Object field. You go to the Implementation Guide (IMG) of the selected component system.
5. Choose one or more IMG object nodes and choose Select.
6. Choose Copy Selected Nodes.
You have now assigned an IMG object to a structure element.The system goes back to the Configuration tab and fills in the Object and Description columns.
Create and assign preconfiguration
1. Go to the structure element to which you want to assign preconfiguration, in the project structure.
2. Choose a Type.
3. To create a new BC Set, CATT or eCATT test configuration from the Configuration tab, enter a name in the Object field and choose Create.
4. You go to one of the following transactions, depending on the object type:
BC Set: BC Set Maintenance
eCATT Test Configuration: Test Configuration (eCATT tool)
CATT: Change test case.
5. Enter the data required to create a new BC Set, eCATT test configuration or CATT.
regards
Gokul -
Error during creation of transfer orders for material
Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzoyour picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry. -
Automatically creation of storage location for material, in MF60
Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
AlbaThanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba -
Creation of Column view for Multiprovider failed
Dear Experts,
I'm facing an issue in TR import.
The TR failed with the below error message.
Creation of column view for XXXXX failed.
XXXXX - Multiprovider
System :BW on HANA (BW 7.4 SP06)
If there's a way to resolve this error, please let me know.
Appreciate your help.
Br, HarishHi,
Here's the workaround I have implemented for this issue.
Implemented the note 1955263 and made the below correction to the programSAP_RSADMIN_MAINTAIN.
Object = MPRO_CS_GEN_ERROR_IGNORE
Value = X
After the above customizations are done, TRs are imported without any issues.
For the OSS message I have raised, SAP has asked us to implement the note 2001969 to fix the issue.
Br, Harish -
Creation of rule file for adding aliases to Members
Please help me in creation of rule file for adding of aliases to the members. I have created a new alias table along with default alias table.
These are the members and alias names for the newly created alias table.
0000002452 TA
0000002459 HJ
0000002460 HK
0000002462 HM
0000004012 CB
0000004015 EA
0000004025 BA
0000004070 DA
0000004087 GC
0000004088 FD
0000006231 CM
0000009103 WP
0000009106 WV
0000009126 WW
0000008458 NH
0000008475 NY
0000008481 NF
0000008483 NG
The below are the members and aliases for the default alias table.
0000001209 P&S Storage Facilities
0000001210 1210 US Procurement & Supply
0000002452 Warren Truck Assembly
0000002459 Toledo I Assembly
0000002460 Toledo II Assembly
0000002462 Toledo III Assembly
0000004001 US Manufacturing Group Office
0000004012 Jefferson North Assembly
0000004015 Belvidere Assembly
0000004025 Sterling Heights Assembly
0000004070 Newark Assembly
0000004087 St Louis North Assembly II
0000004088 St Louis South Assembly II
0000004199 Pilot Operations
0000004501 Opm
0000005111 Kokomo Casting
0000005203 Trenton Engine
0000005205 Kenosha Engine
0000005209 New Mack Avenue Engine
0000005304 Detroit Axle
0000005305 Kokomo Complex
0000005308 Indiana Transmission
0000005403 New Castle Machining & Forge
0000005404 McGraw Glass
0000005406 Toledo Machining
0000006203 Warren Stamping
0000006204 Twinsburg Stamping
0000006215 Sterling Heights Stamping
0000006231 Conner Avenue Assembly
0000002100 2100 Sales & Marketing
0000005221 GEMA - Plant1 Ops
0000009006 9006 Canadian Customs
0000009008 Canadian Manufacturing Group Office
0000009103 Windsor Assembly
0000009104 Etobicoke Casting
0000009106 Pillette Road Assembly
0000009126 Bramalea Assembly
0000008458 Atos
0000008475 Saltillo Truck Plant
0000008481 Toluca Assembly Plant
0000008483 Lago Alberto Truck Plant
Now I have to create rule files to update these aliases.
Please elaborate, so that it will be clear for me. As I am new, please make it up with steps.You dont need to create a rule file. You can create a alias table like this in a notapad
$ALT_NAME 'First'
0000002452 TA
0000002459 HJ
0000002460 HK
0000002462 HM
0000004012 CB
0000004015 EA
0000004025 BA
0000004070 DA
0000004087 GC
0000004088 FD
0000006231 CM
0000009103 WP
0000009106 WV
0000009126 WW
0000008458 NH
0000008475 NY
0000008481 NF
0000008483 NG
$END
and Save it as First.alt and You can import like this
1)Open the outline in edit mode.
2)Select Outline > Import alias table.
3)In the Open dialog box, select the alias table import file.
4)Click OK.
go to outline properties and the new alias table must be made Set as active to view the alias names.
you can create and import up to 10 alias tables -
Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed
Hi ,
We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
2 EGT092 Conversion of table "RSBATCHCTRL_PAR" was restarted
2 EGT241 The conversion is continued at step "6"
2 EGT246 Type of conversion: "T" -> "T"
2 EGT240XBegin step "RSBATCHCTRL_PAR-STEP6":
4 EGT281 sql:
4 ED0314 CREATE
4 ED0314 INDEX [RSBATCHCTRL_PAR~DB] ON [RSBATCHCTRL_PAR]
4 ED0314 ( [JOBNAME] ,
4 ED0314 [JOBCOUNT] ,
4 ED0314 [SERVER] ,
4 ED0314 [HOST] ,
4 ED0314 [WP_NO] ,
4 ED0314 [WP_PID] ,
4 ED0314 [PROCESS_TYPE] )
4 ED0314 WITH ( ONLINE=OFF )
4 ED0314 ON [PRIMARY]
2 ED0314 Line 1: Incorrect syntax near '('.
3 EDA093 "DDL time(___1):" ".........6" milliseconds
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
2EEGT221 Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed
2EEGT239 Error in step "RSBATCHCTRL_PAR-STEP6"
2 EGT253XTotal time for table "RSBATCHCTRL_PAR": "000:00:00"
2EEGT094 Conversion could not be restarted
2 EGT067 Request for "RSBATCHCTRL_PAR" could not be executed
1 ED0327XProcess..................: "ferrari_12"
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "ferrari_12"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0314 Phase 002................: < 1 sec. (Partitioning)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "03.06.2009", "12:47:21"
1 ED0318 Program end==============================================================
1 ETP166 CONVERSION OF DD OBJECTS (TBATG)
1 ETP110 end date and time : "20090603124721"
1 ETP111 exit code : "8"
1 ETP199 ######################################
System properties:
SAP - BI7.0 with EHP1
Database - MSSQL 2000
OS - Windows2003
Please suggest.
Thanks in advance,
Pavan.> We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
> 2 ED0314 Line 1: Incorrect syntax near '('.
> 3 EDA093 "DDL time(___1):" ".........6" milliseconds
> 2EEGT236 The SQL statement was not executed
This is a known problem with SQL Server 2000, see
Note 1180553 - Syntax error 170 during index creation on SQL 2000
I highly suggest upgrading to SQL Server 2005 or 2008.
Markus -
Creation of TO Automatically for Delivery
Hi All
Our Storage type is SU Managed Bulk Storage Type , accordingly we have maintained in material master WM2 different storage unit types,also set up indicators in WM1 for removal and palcement strategies.
Now our requirement is as below...
1. TO creation for delivery - TO is not confirmed automatically ,when we try to confirm manually either forground or
background,sytem prompts to enter storage unit number manually.
We would like this to be automated ie the storage unit number should be picked up automatically by the system during TO
creation and also TO should be confirmed and created.
2.Can we automate creation of TO at the time doing PGI.
3.We would also like to print the TO automatically after PGI.
Thanks in advance
SamsonHi
For Delivery
Go to LE - WM - Interfaces - Inventory Management - Activate Automatic TO Creation - Movement types - Assign
Here for your WH No select the movement type 601 and delselect TR creation & Immed.TO creation
For Goods Receipt
Go to LE - WM - Activities - Transfers - Set Up Autom. TO Creation for TRs / Posting Change Notices
Automatic TO creation - Control data here for the secon WH No where you do not want auto TO remove the
tick mark
Also make relevant changes in in the next - Movements - assign control select the WH no and the movement
no and check for auto TO setings.
Regards
Samson -
Revision: 3936
Author: [email protected]
Date: 2008-10-28 17:27:07 -0700 (Tue, 28 Oct 2008)
Log Message:
Added flag to force the creation of a displayObject for a GraphicElement
SDK-17818 - calling getBitmapData on a GraphicElement that shares it's displayobject always causes a layout pass
adding flag which forces the graphicElement to always create a displayObject for itself. This is a temporary solution to the bug and should get revisted after alpha.
QE Notes: n/a
Doc Notes: n/a
Bugs: SDK-17818
Reviewer: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17818
http://bugs.adobe.com/jira/browse/SDK-17818
Modified Paths:
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/G raphicElement.asmimomimi wrote:
Hi;
I am developing a console for my Server Application. I'm using a JFrame and a ScrollPane.
I am using a vertical Scroll and I want to force the index of this Scroll to be in the down in order to display the last informations added to my console.
I didn't find a solution yet.
Thank you for your help.
CheersYou mean like was mentioned in [this |http://forums.sun.com/thread.jspa?threadID=5420524&tstart=0] post, right on the front page of the Swing Forums? -
Issue at the time of creation of transfer order for inbound delivery
Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
NikhilHi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale
Maybe you are looking for
-
Is incremental backup supported using expdp in oracle 10.1.0.2
Dear All, I heard that incremental backup is not supported in expdp of oracle 10.1.0.2.Here we have a databse which is running in noarchivelog mode.We are not allowed to shutdown the database coz it's live one....... Our database is growing daily by
-
AND... Problems saving
When I drag clips down into the project area and save they are moved back into the clips pane when I return to the program. Initially I was using the computer's HD and it worked fine. On this project I am using an external HD.
-
Dropdown list with multiple selections
I need to create a dropdown list in a selection screen and allow the user to select more than one option. Can this be done. I know how to use VRM_SET_VALUES to create a dropdown but it restricts me to selecting only one value. The user should be able
-
Dear All, I have a question about the Wav playing. The time of the .Wav sound file is around 10 seconds but my labview program cannot wait 10 seconds for playing sound. How can i improve it? Can the sound still is playing and the program also running
-
Newly created form field does not appear in Preview mode, only edit.
Created two fields on this page. Only this first one shows in Preview mode. I saved the doc before hitting preview.