Creation of BP relationship using BAPI_BUPR_RELATIONSHIP_CREATE

Hi,
Needed help.
I am trying to create a Business Partner relationship using standard BAPI "BAPI_BUPR_RELATIONSHIP_CREATE" , but it is not updating the table BUT050 even after calling BAPI_TRANSACTION_COMMIT.
can anybody help me out????
Regards
Bhanu.

Hi Nanduri!
I am also trying to create Business Partner Rel. with Bapi.
Did it finaly work with BAPI BAPI_BUPR_RELATIONSHIP_CREATE ?
Or did you find another BAPI??
Best regards,
Cristina

Similar Messages

Create BP relationship using BAPI_REL_CREATERELATION

Hi all,
Do you know if it is possible to create relationships between two BPs using this FM ?
In fact i'm searching a FM to create relationship in mass but i don't know if BAPI_REL_****
BAPI'S can be used for BP
Thanks for your help !!
Christophe

Kenshiro,
I precise my requirement, in fact i will have to replace existing partners by new ones.
And i want to use FM that allows to create relation as :
BAPI_REL_MASSCREATERELATION
in order to create several relations as the same time, but i don't know if it is possible for BP relationships
If it is not possible using BAPI_REL_CREATERELATION or BAPI_REL_MASSCREATERELATION
i will use BAPI_BUPR_RELATIONSHIP_CREATE (i know it works ) but i'm afraid to face performance issues ......
Best regards
Christophe

Issue with creation of custom layouts using SAP Help Documentation

Hi Experts,
My requirement is to create a home custom page layout (using web dynpro) in Composite Environment. The default options available in CE are not useful for me. I set out to make a custom layout using the following this SAP Help Documentation: [ Creating a Web Dynpro Page Layout (SAP Library - Using the Portal as a Frontend)|https://cw.sdn.sap.com/cw/docs/DOC-102846]
I have followed the instructions and followed all the steps, yet I fail to see the application in CE. The custom page layout is not displayed neither in options and is not available any where.
Please let me know if anybody followed these steps and have got any success.
Thanks in advance
Srikant

Hi
Can somebody let me know if they have implemented a customised solution of creation of page layouts using Web Dynpro - as per the steps suggested by SAP.
Thanks in advance
Srikant

Creation of sale order using bapi in webdynpro using table control

only first row is getting updated when checked in va03, the line items are not getting replaced, only first row is committed..
Here is the code for table control i used...
http://www.scribd.com/doc/51879492/creation-of-sale-order-using-bapi-in-webdynpro-using-table-control
pls help me out with this..

Duplicate Posting. Original is here: Sales order creation with bapi in webdynpro using table control

Unable to select Quantitative data during creation of MIC while using Clas

*Unable to select Quantitative data during creation of MIC while using Class characterstics*
Dear All,
I want to transfer MIC Result recording to Batch class.
For that, i am trying to create MIC & giving class characteristic name in QS21, and then under control data, I am unable to select, Quantitative. By default system is selecting Qualitative. But I want to create that MIC as Quantitative.
Is there any setting for this?
Please help...
Thanks in advance
Edited by: Sitarami Reddy Kummeta on Nov 30, 2009 6:44 PM

Hi
to have master inspection characteristic quantitative ,the class characteristic must be of format "NUM":
Regards
Sujit

Creation of PDF Document using ADF Table data in new window

Hi Guys,
I have a requirement of creating a pdf document from adf table and it must open in a new window.I know creation of pdf document using itext pdf jar.But in my case how to write the table data to pdf and how to open it in new window.
Thanks,
Srinivas.

In the TF do like this..
view activity A-------dialog:invokePdf------->view activity B (invokePdf)
Fragment A command button would be
<af:commandButton action="#{pageFlowScope.PdfBean.openPDF}"
text="Generate" id="cbpdf"
useWindow="true"
windowWidth="700" windowHeight="700"/>
in the action add a return like return "dialog:invokePdf";
Control flow outcome is "dialog:invokePdf". B would be just a empty fragment.

Enhancement of Business Partner (Relationships) using BDT -Bus Data Toolset

Dear Experts,
I have a requirement from my customer enhancing the Business Partner Relationships using BDT.
I should add 2 fields namely salary, employer start date in the Business partner Relationships, it must be added in the characteristics of relationships as one employee can have multiple employers and vice versa.
If I would like to add the fields in Business Relationships using BDT, are the steps same as adding fields in business partner? or do we need to perform any other steps? Did someone already did this type of modification, please provide your suggestions.
After adding the fields is it possible to cusomize the fields for history of the changes? e.g. if salary field has been newly added and after creating a BP after some days I want to change the salary and for the changed salary I want to have a history.
I would appreciate if you can help me with your suggestions.
Many thanks and best regards,
Afroz

Solved the problem Using EEWB.

How to output the outline parent-child relationship using a report script?

I'd like to extract the outline's dimension members with it's parent-child relationship using a report script. Anybody can provide a sample script? Thanks.
Example:
DimensionX
-----MemberX
----------ChildX
Output:
Dimension X MemberX
MemberX ChildX
Edited by: obelisk on Jan 11, 2010 5:16 PM

Sorry a report script won't do it. You have two options
1. Use at Essbase Outline API to walk the outline and get it for you
2. Use the Outline extractor available from Applied Olap (it is a free download). It can be run interactively of as a bat file.
Frankly, I would rather use 2 since I don't have to code it myself

Implement Parent child Relationship using SSIS

Could you please suggest the best way which should not impact the performance of data loading, to implement parent child relationship using SSIS.
We have a flat file RECON80.dat which need to be loaded into the database into 2 tables.
Parent Table JobMaster and Child Table RECON80 .
In the flat file we have a fields Jobphase which will get inserted in JobMaster table and the remaning details like EIN, DATE etc will get inserted in RECON80 table.
The Parent table JobMaster has JobId as an identity column which is the Pk of the table and it will get inserted into the child table i.e RECON80 JobId as FK of the child tale.
Please suggest the best possible way to achieve it.

Hi SubhadipRoy, I think you might need to create a procedure for this task.
Because in SSIS, we cannot directly get the Identity ID.
As my experience, there were serveral ways to do. But all are workaround.
So, My suggestion is.
In SSIS:
1. Create a DataFlow
2. Drag a flat source and load the data from dat file
3. Create a procedure which receive the parameter from your data of each row.
4. Drag a OLEDBCommand to the Panel and Invoke the Procedure also don't forget to pass all your rows to the Procedure in OLEDBCommand control.
5. In Procedure, after insert 1 row you could get the Identity ID throuth SCOPE_IDENTITY()
That's it, hope it works for you even this may not the efficency way.
Althrough, I expect someone can give the best way if there is.

Modelling 1:N relationships using Master Data

Hello All,
I was trying to store the Bill of Material data in BW and was confused as to how model this as master data. The bill of material is basically a BOM number with a number of components in it. i.e. a 1:N relationship between the BOM and the components.
I was thinking of modelling this by compounding the Component (which has quite a number of attributes) with the BOM.
But practically the scenario is such that, today the BOM contains certain components, but someone can delete a component later in R3. I want this information to be reflected as well in BW, but i suppose BW will not take care of this in the above compounding technique.
What is the best way to model such a scenario in BW. Is there a trick or is the only way to do this is do some checking in the update routines and then delete from the master data tables.
Please let me know your opinions.
Best Regards,
Dabre

Hello All,
Does anyone have a similar kind of experience in modelling a 1:N kind of relationship using master data ? And where the N values could change or be deleted ?
Please share your experiences.
Best Regards,
Dabre

Master/Details Relationship using View Links is not not population data

Hi,
I have problem in generating proper data in master/detail relationship using view links passing three parameters between two custom tables can guide me the steps and process how i will able to generate and acheive this requirement.
very urgent
Please suggest me

Without further details, I'd suggest reviewing the following Section of the Fusion Developers Guide:
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_masterdetail.htm#ADFFD758
I've done this many times without issue.

Relationships used in class diagrams

What are the different relationship used in class diagram

<Flame>
Well, th emost usual relationship would be something like "parent", or occassionaly "sibling". This however does not apply if you are modelling the new Java Redneck API, where its quite normal to have relationships like "sister == mother".
</Flame>

Ejb relationships using cmp field

I have defined a cmp relationship using cmr field. Als defined getter/setter for that field.
When I call the getter method container returns all the records for relation.
getter/setter is implemented by container.
My question is can we define in which order relationships record should be retrieved. I mean can we specify Order By caluse for that.

if you want to do this you just have to use Map on collection side of your relationship like this:
@OneToMany(cascade={CascadeType.ALL})
@JoinColumn(name="CUSTOMER_ID")
@MapKey(name="number")
@OrderBy
("number ASC")
public Map<String, Phone> getPhoneNumbers

Is it possible to delete a relationship using sdk in SCSM ? if yes how ?

Is it possible to delete a relationship using sdk in SCSM ? if yes how ?
If the reply was helpful or informative, please remember to mark it as answer or vote as helpful. MCITP SHAREPOINT

Yes, you can use the SDK to remove relationships. Use the EnterpriseManagementRelationshipObject class. You can use the EnterpriseManagementGroup.EntityObjects.GetRelationshipObject* methods to retrieve collections of relationships or individual relationships.
Then you can use an IncrementalDiscoveryData object to remove the relationship objects.
Another method is to use an EnterpriseManagementObjectProjection to remove relationships between objects.
Here's a blog post with the basics:
http://blogs.technet.com/b/servicemanager/archive/2010/10/04/using-the-sdk-to-create-and-edit-objects-and-relationships-using-type-projections.aspx
Removing/Adding activities programatically is not as straight-forward as it might seem. Each activity has a "SequenceId" property. Activities MUST remain in sequence or the workflows will give you unexpected results. For instance, if you delete
an activity, for each activity that follows you must decrement its sequence id property. Similarly, if you add an activity, you must make sure that it's sequence ID falls in the proper order with the other activities (incrementing other activities as needed).
As a side note, BOVI Remy, the SDK is the primary entry point to the framework of Service Manager. The powershell cmdlets lay on top of the SDK. In other words, the cmdlets were created with the SDK. The cmdlets provide an abstraction layer to
make many SDK calls simpler. Basically, anything you can do with Powershell cmdlets, you can do with the SDK. Plus, there's even more that the SDK can do that you can't do with the Powershell cmdlets (currently). :)

Automatic creation of BP relationship while BP is created

We are implementing CRM SALES and using Portal as the user interface.
The requirement is that a Sales Rep should be able to see only the
accounts and contacts (which is nothing but Business partners in the
GUI side) that they have created when they list account using "My
Accounts" in Portal. We are configuring Portal in a such a way that
"My Accoounts" is the only view available for Sales Rep portal.
I have tested and found that if a relationship category of "is the
reponsible employee" is created from the sales rep to the Account OR
Contact then that account or contact will be displayed in the "My
Accounts" or "My Contact"view in Portal.
But requesting a Sales Rep to create the relationship for every
Account and Contact that they create in CRM will NOT be accpetable at
all.
Hence I am looking for an option with which a relationship of "is the
Responsible Employee" can be created automatically when an account or
contact is created by the Sales Rep.
Please let me know your ideas.

Hi Rajadurai,
In the BADI - BUPA_FURTHER_CHECKS implement the method - CHECK_CENTRAL.
The following code could serve your purpose:
IF IV_ACTIVITY eq '01'. "Check if it is for creation
CALL FUNCTION 'BUPR_RELATIONSHIP_CREATE'
   EXPORTING
    IV_PARTNER_1 = IV_PARTNER
    IV_PARTNER_2 = LV_createdby "BP no of the creator
    IV_RELATIONSHIP = 'BUR011' "Code for emp. resp
    IV_DATE_FROM = SY-DATLO
    IV_DATE_TO = '99991231'.
endif.

Creation of BP relationship using BAPI_BUPR_RELATIONSHIP_CREATE

Similar Messages

Maybe you are looking for