Creation of  diagram with the given data as input and to enable click event

Is it possible to create an image from a dynamic input. For example if a relationship exists between
A->B ,A->C ,A->D , B->E,B->F .
Then the initial diagram should display a node leaf diagram with A as root and B,C,D as leaf. When u click on B again different image should pop up displaying B as root and E,F as leaf.
Maybe Maps,SVG maybe useful, i am not sure of the implementation.

Call this fuction module DATE_COMPUTE_DAY and then use this to convert to the day: DAY_NAMES_GET.
If I were you I'd store the day of week returned from DATE_COMPUTE_DAY in your cube in a new infoobject.  Then bring in the text for the infoobject from table T246.
Regards,
Troy

Similar Messages

  • I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?

    I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?
    Thank you.

    You may need to replace the Pram battery.

  • J1INUT Error - No data exist for processing with the given selection option

    Hi Guru's,
    I am using transaction J1INUT utilization of provision of TDS on Services for which in have made the provision with the help of J1INPR, But when I am executing J1INUT transaction .The following error message is displaying:
    No data exist for processing with the given selection options
    I have followed the below steps.
    1) ME21N - OP Creation
    2) ML81N - Service Entry
    3) J1INPR - Provision of TDS
    4) MIRO -  Invoice Posting
    I have checked the Table J_1IEWTPROV In that system is updating the table also. Even I have activated table TRWCA for field IND
    But still I am getting the same error. Any suggestions to resolve this.
    Appreciate your inputs. Thanks in Advance
    Regards,
    DeepaK

    Hi Deepak,
    Refer the below link and follow the steps - Provision for Taxes on Service Recieved.
    Re: Provision for Taxes on Service Recieved
    Hope it may useful to you.
    Regards,
    Govind Bhaskaran

  • Can I insert into a form build in FORMSCENTRAL, a Formula with the numerical data that are updated by a given formula, like in Excel?

    Can I insert into a form build in FORMSCENTRAL, a Formula with the numerical data that are updated by a given formula, like in Excel?

    Hello danna,
    please have a look there as a first step: http://helpx.adobe.com/acrobat-com/formscentral/topics.html  >>> Formula syntax for built-in functions  >>> http://helpx.adobe.com/acrobat-com/formscentral/help/formula-syntax-built-in-functions.htm l
    Hans-Günter

  • Error while connecting to an OData Feed from Excel 2013 PowerPivot . Error: Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported

    I am trying to connect to a Odata Data feed from Excel 2013 Power Pivot
    The datasource is in sharepoint site eg: https://sitename/Shared%20Documents/datafeed.atomsvc
    getting below error
    Error message:
    Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported.
    ============================
    Call Stack:
    ============================
       at Microsoft.Data.DataFeedClient.DataFeedODataReader.ValidatePayloadKind(ODataPayloadKind payloadKind, ODataMessageReader odataMessageReader)
       at Microsoft.Data.DataFeedClient.DataFeedODataReader.InterceptODataException(Action action)
       at Microsoft.Data.DataFeedClient.DataFeedODataReader..ctor(IODataResponseMessage responseMessage, Int64 maxReceivedMessageSize)
       at Microsoft.Data.DataFeedClient.DataFeedODataReader.CreateReader(IWebResponse webResponse, Int64 maxReceivedMessageSize, Boolean applySlashUpdatingBaseUriResolver)
       at Microsoft.Data.DataFeedClient.ODataHelper.GetCollectionsFromServiceDocumentUrl(Uri serviceDocumentUrl, DataFeedConnection connection)
       at Microsoft.Data.DataFeedClient.DataFeedConnection.Open()
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
       at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
    Appreciate suggestions/answers
    NOTE: The error is showing only while using Excel 2013 powerpivot
    its working good with Excel 2010 powerpivot

    Anita,
    Please look into using Power Query to use OData as a source in Power Pivot.
    Thanks!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

    I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
    When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

    StevenD: FYI, I did NOT give you the one star rating. I would never do that!
    StevenD wrote:
    Ow. Someone is grumpy today.
    Well, this is an assignment, so it is probably homework.
    Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
    This would make no sense unless all of it was just covered in class!
    This is not a free homework service with instant gratification.
    OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
    "...but have no idea where to begin".
    open notepad.
    decide on a format, possibly one line per indicator.
    type the document.
    close notepad.
    open LabVIEW.
    Open the existing VI with all the indicators.
    (are you still following?)
    look at the diagram.
    Who made the program?
    Does the code make sense so far?
    Is it a statemachine or just a bunch of crisscrossed wires?
    Where do you want to add the file read?
    How should the file be read (after pressing a read button, at the start of the program ,etc.)
    See how far you get!
    Message Edited by altenbach on 06-24-2008 11:23 AM
    LabVIEW Champion . Do more with less code and in less time .

  • [HELP] Error: "JDBC theme based FOI support is disabled for the given data"

    Hi all,
    I have already set up MapViewer version 10.1.3.3 on BISE1 10g OC4J server. I am current using JDK 1.6. I create a mvdemo/mvdemo user for demo data.
    The MapViewer demo is running fine with some demo without CHART. But give this error with some maps that have CHART like: "Dynamic theme, BI data and Pie chart style", "Dynamic theme and dynamic Bar chart style". The error is:
    ----------ERROR------------
    Cannot process the FOI response from MapViewer server. Server message is: <?xml version=\"1.0\" encoding=\"UTF-8\" ?> <oms_error> MAPVIEWER-06009: Error processing an FOI request.\nRoot cause:FOIServlet:MAPVIEWER-06016: JDBC theme based FOI support is disabled for the given data source. [mvdemo]</oms_error>.
    ----------END ERROR------
    I searched many threads on this forum, some point me to have this allow_jdbc_theme_based_foi="true" in mapViewerConfig.xml and restart MapViewer.
    <map_data_source name="mvdemo"
    jdbc_host="localhost"
    jdbc_sid="bise1db"
    jdbc_port="1521"
    jdbc_user="mvdemo"
    jdbc_password="mvdemo"
    jdbc_mode="thin"
    number_of_mappers="3"
    allow_jdbc_theme_based_foi="true"
    />
    Error Images: [http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png|http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png]
    I have this configuration, but no luck. Could anyone show me how to resolve this problem?
    Rgds,
    Dung Nguyen

    Oop, i managed to have this prob resolved!
    My prob may come from this I use both scott and mvdemo schema for keeping demo data (import demo data).
    Steps i made to resolve my prob are:
    1) Undeploy MapViewer from Application Server Control (http://localhost:9704/em in my case)
    2) Drop user mvdemo
    3) Download mapviewer kit from Oracle Fusion Middleware MapViewer & Map Builder Version 11.1.1.2
    4) Deploy MapViewer again
    5) Recreate mvdemo and import demo data
    6) Run mcsdefinition.sql, mvdemo.sql with mvdemo user (granted dba already)
    7) Edit mapViewerConfig.xml
    <map_data_source name="mvdemo"
    jdbc_host="dungnguyen-pc"
    jdbc_sid="bise1db"
    jdbc_port="1521"
    jdbc_user="mvdemo"
    jdbc_password="!mvdemo"
    jdbc_mode="thin"
    number_of_mappers="3"
    allow_jdbc_theme_based_foi="true"
    />
    Save & Restart MapViewer
    And now, all demos run fine. Hope this helpful for who meet prob like my case.

  • Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
    Best of luck.

  • Can I populate a text field in one PDF with the modification date of a different file ?

    Rather convoluted problem here but I'm trying to place a text field on a PDF document that serves as the main menu page for a library of interlinked PDF documents
    The complete library contains over 7,000 files and additions are added and documents changed almost daily.
    We currently use batch files to open the main menu from it's shortcut and this runs a check on a sync log file (.txt) to ascertain when the last time the user synchronised with the server to get the latest copy of the files.
    Between a certain time range they are told how long it has been since they sync'ed and are offered the option to sync before opening, after a prescribed timeframe they cannot enter without synchronising. We use Allways Sync to conduct the file synchronisation with our mother files on our server.
    What I'd like to do is take advantage of Allways Syncs automatic synchronisation options to synchronise on log on and at prescribed idle periods there after.
    This works fine but I'd like the text field on the main menu PDF to say when the last synchronisation took place - easy if the main menu is the last file modified .. just use info.modDate.
    However, the main menu is rarely modified therefore I wish to import the text to populate the text field from a different file.. either by interrogating the other files modifictaion data (though I doubt Acrobat can do this) or by simply importing some text stored in another file (a .txt file?) which has previously been created by batch file commands.
    Any assistance would be greatly appreciated.
    Regards,
    Nifty Styles
    (Norfolk, England)
    P.S.  I'm using Acrobat 8.3.1. Professional on Windows XP (SP3).

    Thank you for all your help above.
    Just to confirm your advice, am I right with the following conclusions? :
    1. The script (function) to fill the text field with the modification date of a different PDF file needs to be stored in a folder level .js file.
    2. The document containing the text field needs to call the .js function either within the document script or within the custom script property of the text field itself.
    Further to that can you just advise on the syntax for accessing the modification date of the other document.
    Do I need to assign a variable to the address of the file to be used, and then use this variable in the text form filling script (as below) or can I use a direct file reference at the .modDate command.
    var LastSync = "C:\sync\bin\lastsync.pdf";
    var strMsg = util.printd("h:MM tt",LastSync.modDate) + " on ";
    strMsg += util.printd("dddd, d mmmm, yyyy",LastSync.modDate);
    this.getField("LastSyncDate").value = strMsg;
    If the syntax is totally different to the above I would be very grateful for some guidance in the right direction.
    I much appreciate your time to help me ... I'm almost there.
    Kind Regards,
    Nifty

  • First Date of the Given date and month

    Hi Evryone,
    I want to extract first day of the given date.
    For Ex: i aam giving date "30-jan-2013" but i want to show "01-jan-2013".
    In Oracle, Trunc function behaving mentioned above. So i need appropriote function in HANA to get the FIRSTDATE....
    I observed HANA Given last_date function but what about First_Date function? can i use it?
    Regards,
    Chandrakanth

    Hi Chandrakanth,
    Did you have a look on this blog:
    SAP HANA: Get the First Date and the Last Date of Month from a Given Date | WuaWua
    There is LAST_DAY in HANA but not FIRST_DAY.
    Since last day of the month may vary but first day of the month will always be '01'. Hence they may not have added that function.
    So either you can follow that approach in the blog or you can simply replace the day '01'.
    Regards,
    Krishna Tangudu

  • Creation of IBASE with the XIF adapter

    Hello,
    I am trying to create IBASES using the XIF adapter (LSMW). The actual creation of the IBASE is no problem, but creating an IBASE with a partner + address connection seems not to work. In HELP.SAP there are examples of IBASE craetion with components but not with partner relationships.
    What do I need to fill in the E102CRMXIF_IBASE_PARTNER structure, does anyone have any documentation on this subject?
    Thanks advance!
    Arjan.

    Hi Arjan,
    Do you have any documentation of this process 'Creation of IBASE with the XIF adapter'. Please post it.
    Thanks in advance.
    Sameer Ahamad

  • Schedule a report with the system date imbeded in the file name

    Hello,
    Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE?  When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
    Thanks!

    %SI_STARTTIME% will add the time the report ran too.
    Adding onlt the date will necessarily have to be done via the appropriate SDK.

  • In sm30, when save, how to fill the table with the system data in the table

    Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

    Hi ,
    Do like this.
    1. Go to SE11 -> give your table name and press on change button .
    2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
    3.Assign Functin group if already have one , other wise create function group and assign
    4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
    5.Click on new entries
    ->Now press F4 in T column . Select<u> "01" - Before saving the data in the database</u> and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
    ztable-username = sy-uname.
    ztable-createtime = sy-uziet.
    check and activate the code .
    With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
    Don't forget award points if it helps you.
    Regards,
    Raghav

  • How to create a folder with the name = date (e.g. "20030512") with LV6.0

    hi,
    i want to create folders with the name = date automaticly.
    i found several solutions here, but all in LV6.1. could somebody give me an example in LV6.0 ?
    I tried it with "get date-string" but that date-string has "." in it :-(
    6.1-example :
    here

    Hope this will help!
    ian.f
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com
    Attachments:
    folder_create_2003.vi ‏66 KB

  • When I downloaded pics from my camera to iPhoto it put them in a file that was named with the download date. Can I do that with Aperture (as the download default)?

    I recently replaced iPhoto with Aperture. When I download pics into Aperture they are place in a file that's called "Untitled Project." When I downloaded pics from my camera to iPhoto they were put in a file that was named with the download date (YYYY MM DD). Can I do that with Aperture (as the download default)?

    My apologies.
    When I import I have an Applescript that stores the images in a year month day folder-project structure so I haven;t used the default Aperture behavior in some time. When I tested it out to reply to you I was doing it from the file system and it picked up the date from the folder.  mea culpa.
    Anyway the closest you can get is to have Aperture split the images by date. IN the Aperture preferences set the project split granularity
    Autosplit into Projects
    and then in the import window set
    Automatically split projects.
    This will give projects named Month Day, Year (ie: Mar 13, 2012) there is no way to change this
    As I said I have a script that runs on import and sets up a structure like:
    Of course many here will say not to name projects this way, that Aperture has the ability to sort by date and you're better off naming projects something more meaningful. For them that is true and it might be for you also. For me I like to store my masters this way, it works for the way I shoot.
    regards

Maybe you are looking for