Creation of  Enterprise aliases for LDAP or AD accounts in BO XIR2

Hello All,
As per the SAP note --u201C1401058 I tried to run the script attached for creating enterprise aliases for LDAP account in BO XIR2.However am getting the error "Couldn't create SessionManager ".Below is my system configuration:
BO XIR2
Windows 2003
Tomcat 5.5
Kindly advice how this error could be resolved and also is there any other way to create enterprise aliases for ~5000 LDAP account in BO XIR2.
Regards,
Aniket
+919665262169

What happens if you hit update without trying to add a group? This is not a normal issue to get a page not displayed error but it has happened on occasion, possible causes have been bad LDAP groups mapped in the plugin, LDAP configuration issues, LDAP SSL configuration issues, or deployment corruption etc. It really hard to tell. Your best bet may be to open an incident with support(authentication team) to have an engineer take a look.
Regards,
Tim

Similar Messages

  • Manual creation of user aliases for email

    Hi,
    I was able, to create email users using command line tools. Works fine so far. Is there also a way to add aliases and distribution lists.
    If so, how does the syntax look like.
    Cheers
    Eric

    Hi Subash,
    Finally am able to create client and user also successfully.
    by again doing the client copy with change of  selected profile SAP_CUST----.
    Customizing.
    Regds
    phanikumar

  • Can I create enterprise aliases disabled by default?

    On another thread I asked How do I create and new enterprise alias?
    I was directed to the following SAP Note...
    http://service.sap.com/sap/support/notes/1804839
    I was able get things working and create enterprise aliases for all of my Windows AD users that don't already have one.  The reason I am doing this is so that when they get removed from the active directory group and subsequently BusinessObjects their corresponding inbox, personal folder and any schedules they may have created do not get removed.
    So my question is this.  Is there any way to create an enterprise alias disabled by default?  Here is the code snippet downloaded from the aforementioned note.
    I would like to add a line after user.setNewPassword (line #91) that says something like this...
    user.setEnabled(false);
    However, that isn't working.  The method setEnabled is not recogized.  I did check the documentation for IUser and cannot find any method to disable an enterprise user.  Does such a method exist?
    Thanks,
    Noel

    You can't do this directly on the IUser object - it has to be done on an IUserAlias object.  So, your code might look something like this:
    IUserAliases uAliases = user.getAliases();
    for (Object aobj : uAliases){
        IUserAlias alias = (IUserAlias) aobj;
        if (alias.getType() == IUserAlias.ENTERPRISE){
            alias.setDisabled(disable);
    -Dell

  • Creation of rule file for adding aliases to Members

    Please help me in creation of rule file for adding of aliases to the members. I have created a new alias table along with default alias table.
    These are the members and alias names for the newly created alias table.
    0000002452     TA     
    0000002459     HJ
    0000002460     HK
    0000002462     HM
    0000004012     CB
    0000004015     EA
    0000004025     BA
    0000004070     DA
    0000004087     GC     
    0000004088     FD
    0000006231     CM
    0000009103     WP
    0000009106     WV
    0000009126     WW
    0000008458     NH
    0000008475     NY
    0000008481     NF
    0000008483     NG
    The below are the members and aliases for the default alias table.
    0000001209     P&S Storage Facilities
    0000001210     1210 US Procurement & Supply
    0000002452     Warren Truck Assembly
    0000002459     Toledo I Assembly
    0000002460     Toledo II Assembly
    0000002462     Toledo III Assembly
    0000004001     US Manufacturing Group Office
    0000004012     Jefferson North Assembly
    0000004015     Belvidere Assembly
    0000004025     Sterling Heights Assembly
    0000004070     Newark Assembly
    0000004087     St Louis North Assembly II
    0000004088     St Louis South Assembly II
    0000004199     Pilot Operations
    0000004501     Opm
    0000005111     Kokomo Casting
    0000005203     Trenton Engine
    0000005205     Kenosha Engine
    0000005209     New Mack Avenue Engine
    0000005304     Detroit Axle
    0000005305     Kokomo Complex
    0000005308     Indiana Transmission
    0000005403     New Castle Machining & Forge
    0000005404     McGraw Glass
    0000005406     Toledo Machining
    0000006203     Warren Stamping
    0000006204     Twinsburg Stamping
    0000006215     Sterling Heights Stamping
    0000006231     Conner Avenue Assembly
    0000002100     2100 Sales & Marketing
    0000005221     GEMA - Plant1 Ops
    0000009006     9006 Canadian Customs
    0000009008     Canadian Manufacturing Group Office
    0000009103     Windsor Assembly
    0000009104     Etobicoke Casting
    0000009106     Pillette Road Assembly
    0000009126     Bramalea Assembly
    0000008458     Atos
    0000008475     Saltillo Truck Plant
    0000008481     Toluca Assembly Plant
    0000008483     Lago Alberto Truck Plant
    Now I have to create rule files to update these aliases.
    Please elaborate, so that it will be clear for me. As I am new, please make it up with steps.

    You dont need to create a rule file. You can create a alias table like this in a notapad
    $ALT_NAME 'First'
    0000002452 TA
    0000002459 HJ
    0000002460 HK
    0000002462 HM
    0000004012 CB
    0000004015 EA
    0000004025 BA
    0000004070 DA
    0000004087 GC
    0000004088 FD
    0000006231 CM
    0000009103 WP
    0000009106 WV
    0000009126 WW
    0000008458 NH
    0000008475 NY
    0000008481 NF
    0000008483 NG
    $END
    and Save it as First.alt and You can import like this
    1)Open the outline in edit mode.
    2)Select Outline > Import alias table.
    3)In the Open dialog box, select the alias table import file.
    4)Click OK.
    go to outline properties and the new alias table must be made Set as active to view the alias names.
    you can create and import up to 10 alias tables

  • BAPI/ Enterprise service for RFQ creation

    Hi All,
       I need help regarding creation of RFQ using BAPI or Enterprise Web Service.
       Is there any standard BAPI available to meet this functionality of RFQ creation(ME41).
      If any one has worked on similar stuff please reply. If you have any code related to such development then that will icing on cake.
    Thanks in advance,
    Amit Deshpande

    Hi Ashwinni
    I don't think there exist a synchronous enterprise service for the creation of vendors. Do you know if there is an enterprise service to do an update on a vendor? If an application is responsible for creating the vendors (like SAP MDM in a CMDM scenario) then the application of course can send updates on a vendor. Or is the scenario thought to be that you only create the inital vendor in MDM and then maintain it in for example SAP ECC?
    Br
    Göran
    Edited by: Göran Westin on May 24, 2011 2:30 PM

  • Enterprise Service for Vendor Creation

    I would like to know whether there is any Enterprise Service for Vendor Creation in SAP. I have found out an Enterprise Service for the same -- SupplierERPCreateRequest_In. However this is an Asynchronous Enterprise Service.
    I need to know wheter we can create Vendor in SAP through any Synchronous Enterprise Service ?
    Thanks & Regards,
    Ashwinni S. Kadam.

    Hi Ashwinni
    I don't think there exist a synchronous enterprise service for the creation of vendors. Do you know if there is an enterprise service to do an update on a vendor? If an application is responsible for creating the vendors (like SAP MDM in a CMDM scenario) then the application of course can send updates on a vendor. Or is the scenario thought to be that you only create the inital vendor in MDM and then maintain it in for example SAP ECC?
    Br
    Göran
    Edited by: Göran Westin on May 24, 2011 2:30 PM

  • Cannot start Enterprise Manager for Fusion Middleware 11g

    Dear all,
    Because I want to install Oracle EGRCM v8.0.1 in Linux x86_64, so I installed Oracle Weblogic 11gR1 and SOA Suite 11g first.
    After installation successfully, I created a base_domain as default, and can start weblogic administration server ( http://localhost:7001/console ) successfully.
    Now I want to use Enterprise Manager for Fusion Middleware 11g. Per "*Oracle® Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)*", the EM should be available now and the access URL should be http://localhost:7001/em . But when I try to access it, the following error returned:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    +10.4.5 404 Not Found+
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    So I try to start with emctl in *$MW_HOME/oracle_common/bin/*, the error is as following:
    +./emctl: line 387 /d02/Middleware/oracle_common/perl/bin/perl: No such file or directory+.
    I check the path and find out that no directory named "perl" under */d02/Middleware/oracle_common*. So I try to copy the necessary dir from the dir installed Oracle Database 11g ( *$ORACLE_HOME* ), but it returns following error:
    OC4J Configuration issue. /d02/Middleware/oracle_common/sysman/j2ee not found.
    I try to copy necessary dir from *$ORACLE_HOME* but still cannot start EM.
    Please give some advise about how I can start EM for Fusion Middleware 11g, any idea is appreciate!
    Best Regards,
    Kenny Wang

    Ravi Jegga wrote:
    Hi Kenny
    See this post of mine: Re: Fusion Middleware Console
    For any SOA Domain, unless you have Enterprise Manager Facet enabled (during domain creation process or adding later on by extending it), you will not be able to access the EM Console. For quick testing, open config.xml file for your domain and check the modules specially em module as shown below. It should be there. This is for one of my SOA Cluster Domains with SOA on top of WLS 10.3.2
    <app-deployment>
    <name>em</name>
    <target>AdminServer</target>
    <module-type>ear</module-type>
    <source-path>C:\beawls1032\user_projects\applications\soaDomainCluster1/em.ear</source-path>
    <deployment-order>400</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    Thanks
    Ravi JeggaHello Ravi:
    I too like Kenny experienced the EXACT same thing this morning. I was trying to figure out how to modify the formsweb.cfg and I remembered from when I install Oracle9i/10g AS a few years back, that it was on the Enterprise Manager Console for forms (different than the EM for the database). Well that's different than the consoles for Weblogic Server and Weblogic Server for Forms. I ran into the same errors Kenny did, and I followed your steps except that I did install into the domain the Enterprise Manager so when I looked at the config.xml I do see the same code that you posted above. Yet I still get the error when accessing
    http://computer:7001/em
    Also when trying to run emctl (I copied the perl directory from the database) and same error as Kenny. Any tips/clues?
    I'm running on Red Hat Enterprise Linux 5, Oracle 11g (database, Fusion Middleware).
    Thanks,
    Gio

  • How can I create a new iCloud account for a familiy member having a new iDevice and reuse one of my aliases for it

    Hi there,
    I moved into iCloud from the very beginning and started with one iCloud account for me and my family, making use of email aliases for family members. Now the number of personal iDevices grows and I want to create a new and separate iCloud Account for my son. The pity is, that I reserved his full name already as alias address on my initial iCloud account. If I now delete this alias, can I create a new account with the former alias as new primary email address?
    Or is there at least any transfer procedure supported for aliases between different accounts?
    Thanks for your help, lauterbachj

    Couldn't agree more... the folks who are getting penalized for this are the early adopters of .Mac/iCloud dating from the days when the only way to implement a "family" account was to use aliases. Now all my kids' / my wife's name aliases sit in my account, unable to move. I guess the good news is that if I delete them nobody else will get them, but this seems a pretty poor consolation.
    Would it really be so difficult to implement a "move this alias to another iCloud account" option that requires the "sender" and "receiver" to exchange some sort of code to implement the transation in order to prevent fraud?

  • DPS Enterprise License for Apple's B2B Store

    Hey everyone,
    we developed an app and successfully tested it on our iPads via DPS. We aim to distribute the app via the B2B store from Apple and the tutorial PDF from Adobe tells me that we need an "Enterprise license" for DPS.
    Our company uses Adobe Creative Cloud and I am wondering now whether this already  means that we have an "Enterprise license" for DPS, as well?
    Cheers,
    Alex

    No. It does not.

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • Double stack BI and Enterprise portal for SSO

    I am in the process of configuring a double stack BI and SAP Enterprise Portal. Both systems are residing on different domains. We want to utilize the standalone SAP Enterprise Portal for our BEx etc. For that I have exchanged certificates between the ABAP and the SAP Enterprise Portal systems and with the help of Support desk tool I have overcome the certificate issues. The RFC connection from ABAP and SAP Enterprise Portal works fine. The Support desk tool is complaining now about the prefix of these two servers. Also when I check the connection testing between these two systems all the messages are correct except for WEBAS connection it complains about the ping service which is already active on ABAP side. For Connectors it complains about SSO which is not detected/complained by the Support desk tool (0.426). I need your advice:
    1. Either uninstall the JAVA instance of BI or
    2. Make a Federated Portal network by making the BI JAVA as PRODUCER and the SAP standalone as CONSUMER.
    The Support package levels are the same as EHP1 SP 7 of both the double stack BI and the standalone Enterprise Portal systems. The source of users are both local to the systems.

    answered

  • Disabling Keyboard Shortcuts for LDAP Accounts -Workgroup Manager...

    I work in a school and all our students are on LDAP accounts. Recently some of the kids realized that hitting Ctrl-Opt-CMD-8 inverts the screen display. You wouldn't believe the amount of havoc this has created at school, especially when they do it to a kid’s account that doesn't know how to fix it.
    Keyboard and Mouse are NOT one of the items under preferences for either groups or accounts in Workgroup Manager. Does anyone know if there is a way around this, or an alternate way of getting rid of the keyboard shortcuts for Universal Access, for either groups or accounts?
    Thanks
      Mac OS X (10.4.6)  

    Within the Workgroup Manager pane for Preferences, there is an option to manage Universal access. Within that section, there is a tab for 'Options'. You will want to change that management to 'Always' and leave the box for 'Allow Universal Access Shortcuts' UNchecked. This will, in effect, disable the usage of the shortcuts for a User or a selected Group account.
    Hope this helps out!!
    www.Admin660.com

  • SRM 7.0: Authorisation object? Aliases for services in java portal?

    Here's how we did in old SRM 5.0 system (the old and working scenaio):
    In SRM 5.0 we employed S_ICF object to determine, whether a particular user who has just logged in to a system via web using a particular alias - is authorised to use this service.
    We want external and internal users to use different ways to get into system. We have two aliases:
    for internal users: http://srm5.domain.com/srmint
    for external users: http://srm5.domain.com/srmext
    We make aliases using transaction SICF:
    /srmext
    /srmint
    to service /default_host/sap/bc/gui/sap/its/bbpstart
    For alias /srmext we set field  SAP Authoriz. = EXT.
    For alias /srmint we set field  SAP Authoriz. = INT.
    We make 2 roles, both containing just a S_ICF auth object with differend values of field ICF_VALUE, an appropriate role to a user. If a particular user logs in to the system using an alias matching to the authorization value set in his role, he gets in, otherwise he gets an error upon logon. So that his logon is only successful if he used the right alias in URL (provided correct login name and password of course).
    Question. How do we apply similar scenario in new SRM7?
    Is there an authorisation object for java portal in SRM 7.0 - similar to S_ICF object for ABAP portal in SRM 5.0?
    Is it possible and how to make an aliases to java portal, or otherwise automatically detrermine at runtime upon logon, which way (which URL or using some parameter in address line) the user has logged in?

    This question has been answered by the following blog:
    /people/ulli.hoffmann2/blog/2009/10/07/srm-70-running-it-without-the-portal

  • How to configure Oracle Enterprise Manager for ASM RAC Database ?

    Dears,,
    We have two databases (Primary & Standby), each database has two instances
    Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
    How to configure Oracle Enterprise Manager for this environment ?
    I need documentation for this please.
    Many thanks & Regards,,

    Assuming an agent is running on the servers you want to monitor,
    navigate to the Agent home page (Via setup --> Agent)
    When in the agent home page select 'Add Database'and press [Go]
    Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
    When done, press [Ok] to return to the agent home page.
    Regards
    Rob
    http://oemgc.wordpress.com

  • Is there a way to create aliases for formulas without using other cells?

    I have long formulas in certain cells, that consist of a bunch of smaller formulas that I re-use in multiple cells. Is there a way to create an alias for a formula (or create my own function) that I can then piece together into one big formula? I think I can use another cell to drop the formula in, but that just clutters up the spreadsheet.
    Message was edited by: David Powers

    David,
    it looks like you can't define own formulas or create aliases for formulas.

Maybe you are looking for