Creation of Header lable dynamically for a report

Hi,
I have a query like
select sal from emp; and it will give the results like this
SAL
1050
1653
1303
3028
2903
2503
2953
4953
1553
1153
1003
2953
1353
0
1050
Now i want to print all the data in header lable in the excel file.Like
SAL 1050 1653 1303 2903 2503 1153 1003 2953 1353 0 1050
Please help me out ASAP.
Regards
Das

797846 wrote:
Please help me out ASAP.
Could you please explain why you need this for your personal, informational, noncommercial purposes ASAP, or are you violating the terms of use of these forums, or are you just rude and need to learn some manners?
http://www.oracle.com/html/terms.html
>
4. Use of Community Services
Community Services are provided as a convenience to users and Oracle is not obligated to provide any technical support for, or participate in, Community Services. While Community Services may include information regarding Oracle products and services, including information from Oracle employees, they are not an official customer support channel for Oracle.
You may use Community Services subject to the following: (a) Community Services may be used solely for your personal, informational, noncommercial purposes; (b) Content provided on or through Community Services may not be redistributed; and (c) personal data about other users may not be stored or collected except where expressly authorized by Oracle
>
http://www.catb.org/esr/faqs/smart-questions.html#urgent

Similar Messages

How can i change column header value dynamically in IR report

HI,
I have created report with the help of collections. Report query has been changing dynamically but i got problem with report header names and headers names has not been changing dynamically it is always showing like c001,c002....etc so, i have created global item(G_ITEM) in shared components--->Applications items after that
I have created process(before headers) and assigning some value to G_ITEM and used &G_ITEM to column headres in IR Report but here &G_ITEM is not showing any value.
How can i achieve dynamic headers names by using *&G_ITEM(global items)* Please guide me to achieve this.
Thanks in advance.
Regards
Narender B

Narender wrote:
HI,
I have created report with the help of collections. Report query has been changing dynamically but i got problem with report header names and headers names has not been changing dynamically it is always showing like c001,c002....etc so, i have created global item(G_ITEM) in shared components--->Applications items after thatWhy didn't you answer the questions in the other thread to see if there was a better approach than this?
I have created process(before headers) and assigning some value to G_ITEM and used &G_ITEM to column headres in IR Report but here &G_ITEM is not showing any value.
How can i achieve dynamic headers names by using *&G_ITEM(global items)* Please guide me to achieve this.The static text exact substitution method of referencing the value of an APEX item requires a terminating dot ("."):
&G_ITEM.

Defining "prior-week" timeframe dynamically for scheduled reports

I have a number of reports that I need to execute each week. But, the scheduling options don't allow me to kick off the report on a Sunday AND constrain the timeframe to the prior week (Sunday-Saturday).   I have a prompt built into the original query, but that's useless if I want to automate the output.
I was successful getting the query to work against the upstream database using the following query fragment:
BETWEEN CURRENT_DATE - INTERVAL '7 day' AND CURRENT_DATE - INTERVAL '1 day'
But, there is no option to enter this query into the BI.Ondemand UI.
Any insight would be helpful.   This issue is hindering progress with our metrics automation plans.
Regards,
-Joe

I'm using the Web-based version of BI.ondemand.
I don't have access to the OnDemand Desktop Publisher because the hosting provider I'm using doesn't support it.
The scheduler is very unstable in the web version. I often get "page not loaded" errors in the prompt window within the popup scheduler.
I've also just determined that the week-definition in BObj is Monday-Sunday and not Sunday-Saturday.   I'd need to make that adjustment as well.
--Joe

Automatic creation of MS Word Documents within a Report

Dear Experts,
within my report which creates automatically activities in a background process I have to create MS Word Documents and
attach this Word Documents to the Activity.
The Word Document does have a Logo and the text is changing with every Activity created.
What would be the best technical solution for the creation of this word documents for my report?
Best Regards
Oliver

Hello, I have found out what was the problem. In the end I have used method EDITREPLACE and not WW2_EDITREPLACE and I put the method EDITREPLACE more to the end of my ABAP Code:
REPORT z_prueba_oliver.
TYPES: BEGIN OF ty_partner,
             nif            TYPE bu_partner,
             name_org1      TYPE bu_nameor1,
             conting_com    TYPE c LENGTH 2,
             fecha_efecto   TYPE zbufecha_ef,
             END OF ty_partner.
DATA: lt_partner1     TYPE TABLE OF ty_partner,
             ls_partner1     TYPE ty_partner,
             lv_file_save_as TYPE c LENGTH 40,
             lv_contador     TYPE n LENGTH 3.
* Include necesario para la declaracion de objetos OLE2
INCLUDE ole2incl.
* Declaraciones para la llamada a WORD.
DATA zword TYPE ole2_object.
CLEAR zword.
ls_partner1-nif = 'X7510034M'.
ls_partner1-name_org1 = 'Razon Social 1'.
APPEND ls_partner1 TO lt_partner1.
ls_partner1-nif = 'X7510034M'.
ls_partner1-name_org1 = 'Razon Social 2'.
APPEND ls_partner1 TO lt_partner1.
ls_partner1-nif = 'X7510034M'.
ls_partner1-name_org1 = 'Razon Social 3'.
APPEND ls_partner1 TO lt_partner1.
ls_partner1-nif = 'X7510035M'.
ls_partner1-name_org1 = 'Razon Social 4'.
APPEND ls_partner1 TO lt_partner1.
ls_partner1-nif = 'X7510035M'.
ls_partner1-name_org1 = 'Razon Social 5'.
APPEND ls_partner1 TO lt_partner1.
LOOP AT lt_partner1 INTO ls_partner1.
AT FIRST.
    CREATE OBJECT zword 'WORD.BASIC'.
* Se abre el fichero que contiene la plantilla de la carta
    CALL METHOD OF zword 'FILEOPEN'
      EXPORTING
      #1 = 'C:DOCSPRUEBA_1.DOC'.
ENDAT.
* Se selecciona todo el texto del archivo PRUEBA_1.DOC
CALL METHOD OF zword 'EDITSELECTALL'.
* Se copia el texto seleccionado al portapapeles
CALL METHOD OF zword 'EDITCOPY'.
* Se crea un documento nuevo, al que WORD llama documento1
CALL METHOD OF zword 'FILENEW'.
* Se pega el texto del portapapeles a documento1
CALL METHOD OF zword 'EDITPASTE'.
* Posicionar al principio del documento
CALL METHOD OF zword 'STARTOFDOCUMENT'.
* Posicionar al principio del documento
CALL METHOD OF zword 'STARTOFDOCUMENT'.
* Se selecciona todo
CALL METHOD OF zword 'EDITSELECTALL'.
* Se borra la selección
CALL METHOD OF zword 'EDITCLEAR'.
* Se incorpora el texto original de PRUEBA_1.DOC
CALL METHOD OF zword 'EDITPASTE'.
*IF ls_partner1-conting_com is initial.*
   *CALL METHOD OF zword 'EDITREPLACE'*
    *EXPORTING*
    *#01 = '#linea2y3#'*
    *#02 = 'de la cobertura de Accidentes de Trabajo, de los siguientes código de cuenta de cotización (CCC):'*
    *#03 = 0*
    *#04 = 0*
    *#05 = 0*
    *#06 = 0*
    *#07 = 0*
    *#08 = 0*
    *#09 = 0*
    *#10 = 1*
    *#11 = 0*
    *#12 = 1.*
*else.*
     *CALL METHOD OF zword 'EDITREPLACE'*
    *EXPORTING*
    *#01 = '#linea2y3#'*
    *#02 = 'de la cobertura de Accidentes de Trabajo y Contingencias Comunes, de los siguientes código de cuenta de cotización (CCC):'*
    *#03 = 0*
    *#04 = 0*
    *#05 = 0*
    *#06 = 0*
    *#07 = 0*
    *#08 = 0*
    *#09 = 0*
    *#10 = 1*
    *#11 = 0*
    *#12 = 1.*
*ENDIF.*
*CALL METHOD OF zword 'EDITREPLACE'*
    *EXPORTING*
    *#01 = '#codprov#'*
    *#02 = ls_partner1-nif*
    *#03 = 0*
    *#04 = 0*
    *#05 = 0*
    *#06 = 0*
    *#07 = 0*
    *#08 = 0*
    *#09 = 0*
    *#10 = 1*
    *#11 = 0*
    *#12 = 1.*
CALL METHOD OF zword 'EDITREPLACE'
    EXPORTING
    #01 = '#nomprov#'
    #02 = ls_partner1-name_org1
    #03 = 0
    #04 = 0
    #05 = 0
    #06 = 0
    #07 = 0
    #08 = 0
    #09 = 0
    #10 = 1
    #11 = 0
    #12 = 1.
* Se reemplaza el campo #nomprov# con el valor de la tabla interna.
CALL METHOD OF zword 'EDITREPLACE'
    EXPORTING
    #01 = '#FECHA_EFECTO#'
    #02 = '10 de Junio de 2010'
    #03 = 0
    #04 = 0
    #05 = 0
    #06 = 0
    #07 = 0
    #08 = 0
    #09 = 0
    #10 = 1
    #11 = 0
    #12 = 1.
lv_contador = lv_contador + 1.
CONCATENATE 'C:DOCS' 'PRUEBA' lv_contador '_' sy-datum '.DOC' INTO lv_file_save_as.
* Se cierra el documento activo, documento1 con opción de salir sin salvar
CALL METHOD OF zword 'FILESAVEAS' EXPORTING #1 = lv_file_save_as.
* Se cierra el documento activo PRUEBA.DOC con opción salir sin salvar
CALL METHOD OF zword 'DOCCLOSE' EXPORTING #1 = 2.
AT LAST.
*   Se cierra WORD
    CALL METHOD OF zword 'APPCLOSE'.
*   Se libera el objeto ZWORD
    FREE OBJECT zword.
ENDAT.
ENDLOOP.

Dynamic Query for a report

Hi,
I have to generate a report which contains a query with database link. This database link is not hard coded and would be picked up from another report which contans a link to this report. So this database link value for the query could be any. Can anyone guide me hot to write a dynamic select statement so that i could append database link value at run time.
Thanks
Salman

Hi,
You can not directly use a PL/SQL query to create an Interactive Report - that is not yet available.
What you could do is create a collection from your query and then use that for the report. Have a look at: [http://download-uk.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32471/advnc.htm#BABGHJFD].
In there, you will see APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY - this allows you to create a collection from a string. You could add a PL/SQL process to your page that runs "On Load: Before Header" that actually creates the collection. Something like:
BEGIN
IF APEX_COLLECTION.COLLECTION_EXISTS('MYCOLLECTIONNAME') THEN
APEX_COLLECTION.DELETE_COLLECTION('MYCOLLECTIONNAME');
END IF;
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY('MYCOLLECTIONNAME','MY SQL QUERY STRING');
END;Your Interactive Report can then be based on:
SELECT SEQ_ID, C001, C002, C003, ...
FROM APEX_COLLECTIONS
WHERE COLLECTION_NAME = 'MYCOLLECTIONNAME'The tricky part is the headings as these would tend to be the SEQ_ID, C001, C002, C003, etc column names from the collection itself.
To get around this, make sure that the report's sql statement includes as many Cnnn columns as you will need for the widest of the reports. Before doing anything else, run the report once to make sure that all these columns are included in the output.
Then, through Shared Components, Application Items, create items that will hold heading names - for example, G_HEADING1, G_HEADING2 etc - one for each possibile column.
Now, update the process to:
BEGIN
IF APEX_COLLECTION.COLLECTION_EXISTS('MYCOLLECTIONNAME') THEN
APEX_COLLECTION.DELETE_COLLECTION('MYCOLLECTIONNAME');
END IF;
IF ..test1.. THEN
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY('MYCOLLECTIONNAME','MY SQL QUERY STRING 1');
:G_HEADING1 := 'ColumnHeading1Value';
:G_HEADING2 := 'ColumnHeading2Value';
:G_HEADING3 := NULL; -- column not used for this query, so set it to null
ELSIF ..test2 .. THEN
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY('MYCOLLECTIONNAME','MY SQL QUERY STRING 2');
:G_HEADING1 := 'ColumnHeading1Value';
:G_HEADING2 := 'ColumnHeading2Value';
:G_HEADING3 := 'ColumnHeading3Value';
ELSIF ...etc...
.. etc ...
END IF;
END;Finally, on the report itself, set the column headings to *&G_HEADING1.*, *&G_HEADING2.* etc. Then, on each column, set a Condition of "Value of Item in Expression 1 is NOT NULL" and in Expression 1, enter in the application item for that column - eg, G_HEADING1
I have done all that here: [http://apex.oracle.com/pls/otn/f?p=16338:5] - select either Departments or Employees from the list and the report will change.
Andy

Dynamic name for a report

Hi,
I have a report query that print the emplyee report
I use BI publisher.
The report query name attribute is : employee.
This name is static, in other word for each employee i get the same name (employee.pdf).
But i want that the name of the report will be dynamic.
for example if i have to print the jhon report i get jhon.pdf
for david i get david.pdf
My question is: is it possible?
If yes how can I do that
Thanks,
Abdo

Hi,
Assuming that your link is just part of the page somewhere, then you could create a hidden page item that has the desired name in it (typically populated by a computation or process that runs Before Header). You should then be able to use:
f?p=&APP_ID.:0:&SESSION.:PRINT_REPORT=&P1_EMPLOYEENAME.Where P1_EMPLOYEENAME is the hidden page item name.
Andy

How to Dynamically Select the Data File for a Report at Print Time

How do you configure a Crystal report to ask for the file to be reported on as the report is being printed, and allow the user to browse to the file?
The environment is Crystal Reports XI, SP3, with ODBC connection to Sage Timberline Office data version 9.7. The client names their Payroll unposted time file each pay period, and also needs to report on their posted data file, depending on the time period for the report. The client will need to select both the date range and the file name.
I have created a SQL statement in Add Command in Database Expert, which prompts for a file name, but it does not let you browse to select a file on the computer.
Therefore, in the prompts when they print the report, the parameter offers the user a default file name similar to the name they currently use, so they only have to change the payroll period end date in the supplied file name to run the report successfully.
The client is concerned that sometimes a user will name their data file differently, and not know how to input the file name into the Crystal report prompt at print time.
My research on dynamic prompts showed you can link to fields inside the data record, but I did not see a way to dynamically link to select the actual files used in the report.
Another question is that the naming convention used by the SQL query is different than the basic Windows file name, but I think I can handle that issue.
The actual file name is typically similar to:
04-10-11 BP NEW.PRT
However, in the SQL query, the record ID looks like:
PRT_00-00-00 BP NEW__TIME
The SQL Statement using a parameter is:
SELECT
"PRT_CURRENT__TIME"."Employee",
"EMPLOYEE1"."Employee_Name",
"PRT_CURRENT__TIME"."Date",
"PRT_CURRENT__TIME"."Units",
"PRT_CURRENT__TIME"."Job",
"JOB1"."BP_Emps_Used"
FROM
"PRT_CURRENT__TIME" AS "PRT_CURRENT__TIME"
INNER JOIN "JCM_MASTER__JOB" AS "JOB1"
ON "PRT_CURRENT__TIME"."Job"="JOB1"."Job"
INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE1"
ON "PRT_CURRENT__TIME"."Employee"="EMPLOYEE1"."Employee"
WHERE "JOB1"."BP_Emps_Used" = 1
AND
("PRT_CURRENT__TIME"."Date" BETWEEN
{?As of Date} - 41 AND {?As of Date})
UNION ALL
( SELECT
"PRT_NEW__TIME"."Employee",
"EMPLOYEE2"."Employee_Name",
"PRT_NEW__TIME"."Date",
"PRT_NEW__TIME"."Units",
"PRT_NEW__TIME"."Job",
"JOB2"."BP_Emps_Used"
FROM
"{?NEWPRT}" AS "PRT_NEW__TIME"
INNER JOIN "JCM_MASTER__JOB" AS "JOB2"
ON "PRT_NEW__TIME"."Job"="JOB2"."Job"
INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE2"
ON "PRT_NEW__TIME"."Employee"="EMPLOYEE2"."Employee"
WHERE "JOB2"."BP_Emps_Used" = 1
AND
("PRT_NEW__TIME"."Date" BETWEEN
{?As of Date} - 41 AND {?As of Date})

Hello,
Sorry you'll have to contact Sage on how to do this. We can help you once you get connected but we can't help you get around their connection methods.
There is no Preview Set Database Connection method you can use in CR Designer. The Designer assumes you select it first or use the Set Location option before previewing or refreshing the data.
If you are doing this in the Sage program itself we can't help you, you'll have to contact Sage for assistance.
Sage is an OEM Partner they are responsible for supporting their product and CR. If they have issues help you then they will contact us directly for assistance.
Thank you
Don

Dynamic lenght in report heading

Hi experts,
I need to pass dynamic length in report heading.
i.e.., REPORT zrep LINE-SIZE dyn_len NO STANDARD PAGE HEADING.
So that my report output width will be in different length based on value dyn_len.
Any solution or alternative in simple list display. Pls suggest ....
Thanks in advance.
Zak.

Hello,
Do not specify LINE SIZE in that case.
Thanks,
Jayant

Dynamic Title for Interactive Report?

I have an interactive report where I am passing in interative report filters. This is great becase it allows me to reuse a single interactive report in different ways. However, one drawback I am running into is the report title. I'd really like to be able to change the report title based on the filters that I pass in. Is this possible? Can the report title be dynamic?
Thanks,
Andrew Watson

It,s possible.
I'm using item references to alter the report title.
Set the item value to the title that you want for your report and the region name as the example.
Example: Report &P1_ITEM. &P1_ITEM1. &P1_ITEM2. and so far.

Dynamic url link for Crystal Reports Enterprise?

Hi all,
We recently upgraded to SBOP 4.0 SP2 and are looking at migrating our existing Crystal Reports from Crystal Reports 2011 to Crystal Reports for Enterprise 4.0.
Up to this point we have been utilizing the BW Publisher and role menus in BW.
Our long term goal is to migrate users from the BW GUI to the BI LaunchPad but this will be a gradual process.
Until we make the final switch to the LaunchPad we need to maintain the links in the role menus. I found the Document Link option for Crystal Reports so I have a URL to point to the report that we can put in the role menu, but the system value is not dynamic. Is there a way to make this dynamic like we can do with web template URLs?
For example, when using a web template URL we can use the <bsp_server> parameter in the URL to determine the SAP system. Is there an equivalent that can be used in the Document Link for the Crystal Report to determine the respective SBOP system?
Thanks.
-Brian

Hi,
Below is link for the Crystal report for Eclipse 2.0:
[http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp|http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp]
you could always refer to the following thread as Bryan updated with new releases :
[Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!;
Hope this will help
Regards,
Rameez Shaikh

JAR creation failed. See details for additional information.-invalid header

Hi
I am working with 2 databases , 1 is oracle and the other is sybase in my java application.
The java application gets data from both the databases and creates 3 output files and 1 audit log file .
Now i tried creating the jar file
my manifest file looks like this :
Manifest-Version: 1.0
Sealed: true
Main-Class: tableA
Class-Path:jtds-1.2.jar;classes12.jar ----------------------------> is this correct .
Now when i try to create the jar file it gives me an err
JAR creation failed. See details for additional information.-
invalid header field
invalid header field
ANyone pls help me ... I am creating the jar file like rhis
export -> selecting JAR file -> selecting 1 and 3 rd checkboxes ->location of the jar file -> next->selecting 2 checkboxes in JAR PACKAGING OPTIONS -> ( my question is how to create the manifest file with class-path , their is no option ) so i am creating the manifest file and creating the jar file and then adding the class-path to the manifest file and removing the jar file and recreating the jar file now selecting the manifest file .
is this giving the above error --> if so how to create the manifest file before creating the jar file with class-path and main class

Double post: [http://forums.sun.com/thread.jspa?threadID=5358017&messageID=10559776#10559776]

Dynamic Logic for a report: User Maintained Logic

Hi All,
I've come across a requirement that needs to build a report.
However, the set of definitions defined for the report output might change over time.
Now every time the Definitions change, the User might have to request the change in the report through a development.
Is there a way, where the Users can maintain certain set of rules and which can be maintained easily, but also allow the report to dynamically pick up the logic that it needs to process the data to the required output layout.
To explain a little more in detail;
Data from ZTABLEA is reported out by issuing each line with a BucketID.
The report will aggregate the data to each Bucket Levels in output.
But, The Logic for issuing the ZTABLEA line with a BucketID can change over time.
So, a ZTABLEA line which was issued a BucketID_1 initially when FIELD1 of ZTABLEA = A,
can later be assigned to another BucketID when FIELD1 of ZTABLEA = A.
And this assignment needs to be maintained by the Users.
Some of these Logics can be complex in the sense that they Could span over several Fields for a condition.
Please advice. Any and all suggestions are highly appreciated.
Thanks,
RK.
Edited by: RK on Jul 17, 2008 7:16 PM

Following in from what Kev said.
There's dynamic SQL available (which you should put in a TRY...CATCH....ENDTRY block), so they can effectively define a WHERE condition, which would be stored in your table.
I'd suggest that you have a check when they save the new logic, that the where clause is valid.
If you need some kind of other dynamic abap look at GENERATE, READ REPORT and other associated keywords in the ABAP help.
matt

Error during Variant Creation for a report

hi,
i'm trying to schedule a background job for the report MEREP_DISTRIBUTOR. it requires me to create a variant. i go to SA38 Transaction and try creating a variant.
<b>"Maintain Variant: Report MEREP_DISTRIBUTOR, Variant Distributor" </b>Screen.
When i give simulate, i get this error.
<b>Simulate --> No Mobile ID found.</b>
Can you help me solve this issue?
Thanks and Regards
Arun
PS: Answers will be Rewarded.
Message was edited by: Arun Kumar Ravi

> Login in to your webconsole, under the
> 'Administration' tab, press 'Add entry' button; which
> will allow you to assign the componen to a user.
at this point, i get a message "Selected component type cannot be assigned\n"
but when i see what components have been assigned,
On All Devices MI_ADMIN ZMI0_EX1 01 Deployment with Next Synchronization With Role Assignment 2005-12-29 19:14:23
ZMI0_EX1 - MCD Name.
01 Version
MI_ADMIN - User name.
the above statement was a result of role sync from the ABAP server side.
So, what's next?
Regards,
arun.
Message was edited by: Arun Kumar Ravi

Creation of Spool for a Report Output in background.

Hi Gurus,
I am working on a Report and my requirement is that a Spool should be Generated for the Report Output in background. Instead of generating the spool manually, I need it to be generated in background.
Please let me know ASAP.
Regards,
Amit.

Get print parameters using 'GET_PRINT_PARAMETERS'.
DATA : rep LIKE pri_params-plist,
w_title TYPE tsp01-rqtitle,
mstr_print_parms LIKE pri_params.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING destination           = 'LP01'
              copies                = 1
              list_name             = rep
              list_text             = w_title
              immediately           = 'X'
              release               = 'X'
              new_list_id           = 'X'
              expiration            = 1
              line_size             = 132
              line_count            = 65
              layout                = 'X_65_132'
              sap_cover_page        = 'X'
              cover_page            = ' '
              receiver              = sy-uname
              department            = 'System'
              no_dialog             = 'X'
    IMPORTING out_parameters        = mstr_print_parms
valid = mc_valid.
and then use submit statement-
SUBMIT
zp1012_ar_rep_vendstat
TO SAP-SPOOL
WITHOUT SPOOL DYNPRO
          SPOOL PARAMETERS mstr_print_parms
WITH s_lifnr IN s_lifnr
WITH p_bukrs eq p_bukrs
WITH s_gjahr eq p_gjahr SIGN 'I'
WITH s_monat BETWEEN p_per-low AND p_per-high SIGN 'I'
                   AND RETURN.
COMMIT WORK.
Regards,
Aparna Gaikwad

Transaction code creation for a report group

Hi all,
I created a transaction code ZF17 for a report group FI02 with the following parametrs.
Transaction: START_REPORT
checked the skip initial screen check box.
D_SREPOVARI-REPORTTYPE = RW
D_SREPOVARI-REPORT = FI02
When i tried to run the T-code ZF17, it gives me
a message : PROGRAM FI02 doesn't exist
Any ideas why this message comes up?
Thanks,
Sobhan.

I would think that its looking for a program name in the D_SREPOVARI-REPORT field, FI02 is not a program name.
Regards,
Rich Heilman

Creation of Header lable dynamically for a report

Similar Messages

Maybe you are looking for