Creation of Recovry Media is incomplete, Please HELP! (HP Pavilion g6 -210tu Notebook)

Hi,
My problem is that during creation of recovery media, i have successfully created 1st and 2nd DVD-R but Hp Recovery Creation Media fails to create 3rd DVD and consequently it is unable to create 4th and 5th DVD for recovery.
During creation of 3rd DVD-R, Hp Recovery Creation Media successfully reads blank DVD and prepares files to be burn but it fails to burn these files on 3rd DVD.
Further, DVD autometically is ejected with massage "We are experiencing errors in Recovery Media Creation. please try again."
Please Help me! how to fix this problem.
I have also tried the following as per guidlines on HP support Website--
1. disabled User Control Account.
2. temporary disabled my antivirus.
3. i have manually run chkdisk for Partition drive D which is my recovery drive.
4. i have also change and tried different DVD to burn but i faced same issue.
Please note that I have never modified or encrypted my partition drive of recovery but i have recently Updated BIOS and Drivers form HP.
My system details are as follows--
OS- windows 7 home basic (64 bits)
MODEL- HP Pavilion g6 -210tu Notebook PC
PRODUCT NO.- B6U26PA#ACJ
Processor- Intel i3 CPU@ 2.40GHZ,
RAM - 2 GB
SMBIOS Version      2.7
BIOS Version   - /Date Insyde F.25, 29-05-2013
Boot Device      -\Device\HarddiskVolume1
Please help me and let me know what should i do to create subsequent DVD.

Hi,
Once again thank you for your valuable feedback and support!
The product name and model no. i have mentioned in the post are correct. i have also try to locate them behind battery of my notebook. If you think it may be wrong, you can check for this model no. on HP support website here
I have also tried esc+ F2 and run the HP PC Hardware Diagnostics but i did not find option "Component Test" and therefore unable to locate optical drive option.
I have understood your statement regarding benefit of USB tumbdrive over DVDs and much appreciated.
thanks you for that.
I personally want to say that i was unaware about the fact for these non branded DVDs. The shopkeeper (notebook showroom) told me that these DVDs are good to create Recovery Images because they also use these DVDs to create Recovery Images.
I have purchased non branded DVDs but it does not mean i wanted cheapest solution for Recovery. simply i wanted to Recover my system using best DVDs.
Well, now let me know how can i undo the creation of media which i have created in those two DVDs successfully in order to create Recovery Images on USB Thumbdrive ?
How can i locate Opticle Drive Test?
I am waiting for you response.......
Regards,

Similar Messages

  • Adobe Media Encoder error, please help

    I've just recently tried to use Adobe Media Encoder for the first time and no luck. When I try to run a queue it gives me the following error message and shuts down. I have AME version 5.0.1.0 64 bit for Win 7 64 bit. I'm trying to convert a .MPG into any other format. I've tried many different configurations and it still shuts down. Please help. I want to use this thing.
    Adobe Media Encoder Debug Event
    Adobe Media Encoder has encountered an error.
    [..\..\Exporter.cpp-390]
    button - Continue
    then it shuts down

    Hi,
    Having exactly the same issue. Did you manage to resolve?
    Nell

  • Media not working:please help

    okay so, my blackberry will not play my videos, youtube videos, the ringtones that came with the phone, flixter videos, or any kind of media, a message pops up when i try to select a ringtone that says invalid ringtone selsction. a security wipe did fix this as well as a reboot but ten minutes later it will do the exact same thing. it will not ring when it stops playing media and i use it for an alarm clock so i really need this feature.
    if anyone is experiencing this or know how to fix it please help my carrier (mts) wont do anything about it. the tech guy told me that blackberry arent supposed to play videos and iv got nothing to worry about.

    Hello caroline0404,
    I would try to do what is called a clean software reload.
    KB11320 will show you how to do this reload. It is important you back up your BlackBerry before starting as all user data will be deleted.
    After the reload, test the media to make sure it works. I would also delay before restoring any data.
    When you go to restore your data, it is recommended to do a selective restore of your data as shown in KB23680 (Desktop Manager version 6.0) or KB10339 (versions 5.0.1 and earlier)
    Let me know how you make out.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • ADOBE PREMIERE PRO-Merged clips wont link to the Media...please help!

    One of my hard drives crashed and it unlinked other media which is on the other hard drive...In Adobe Premiere Pro when I try to link the media it links but the merged clips remain unlinked...I see the picture but no sound. Please help me its a massive project and I'm in desperate need of help. Thanks!

    You might want to go read in http://forums.adobe.com/community/premiere/hardware_forum?view=overview
    Starting with the FAQ drop down list at the top of the page for many articles/ideas

  • Media turns black please help!!!!

    Hello, I have had Premiere Pro CS5 for a while and I have had this particular problem ever since I started using it.
    Basically, I am making a video right? And I have imported a bunch of MPG videos to put into the timeline.
    But guess what? For some strange reason about 2 or 3 of these videos start to flash black when I am editing and eventually just turn to a solid black, but you can still hear audio. If I wait a long time it sometimes flashes a bit again and comes back on and saving also might help revive a particular video, sometimes but not always.
    Even after I manage to revive a video it usually just turns to black again a few minutes later. And it is always the same videos, not different ones. The really bad thing is no matter what I do, even after I have supposedly revived the videos, when I export the movie as Windows Media (MWV) those videos are still black in the final product.
    This problem is excrutiatingly irritating!!!!!!!!!! Does anyone know how to fix it or what exactly the problem is! PLEASE!!!! I can't find it on google anywhere!!!!!!

    That material is unsuited for editing or you are using the trial version. So either convert to make it editable and take the quality hit, or use other software or upgrade to the full version. Choose the one that applies.

  • Have to update my iPad 2 iOS and don't know how to backup or sync photos and music, videos etc, to my windows 7 laptop. Then Iknow I need to update to iOS 5 before I can restore apps, and media, etc. Please help me, as I am not computer savvy.

    I need help on how to back up my  iPad 2  or sync my photos, videos, and music to my windows 7 laptop, b4 I can upgrade my iOS to ios5 and restore my appss and files, simple instructions please as I am not  computer knowledgeable, thanks for any help!

    When connecting ipad to itunes, in the Summary tab (in itunes for your device), look in the Backups section and choose to back up to itunes.
    Read this...  import photos to your computer...
    http://support.apple.com/kb/HT4083

  • I just did a recommended updated on my mac Mini and it has deleted my entire media library! Please Help!!!

    I received the update notice from system preferences, so I followed the usual drill, accepting recommended update/downloads and restarting - one of those being an iTunes update.
    Once the mini was restarted I went to my iTunes movie library to watch a movie and discovered that ALL movies (digital downloads and iTunes purchases) as well as my entire music library had been deleted. This has NEVER happened with previous updates.
    How can I restore/find my files? They do not seem to be in the user location and I tried changing where iTunes looks for the music and movie files but that didn't work.
    I'm so frustrated, there were over 11,000 music files and over 30 movies that seem to have been deleted.
    Any help or suggestions to find the missing files is much appreciated!!!

    I'd fisrt go to spotlight and search for .m4a and/or .mp3 files.

  • 7373 screen image incomplete - please help repair ...

    I bought the 7373 recentl and recently the image only covers one smallportion of the screen on the left hand side.
    Anybody have any suggestions?
    anyone know how and where to send it for repairs?
    Ernie
    EDIT: removed personal email addressMessage Edited by damocles on 29-Jan-2007
    09:55 AM

    Thanks for trying.
    The only address for repair was in Sussex, England.
    Regarding "full screen" options - yes, the phone was working well with a full screen, but then something must have happened because only the right 1/2 centimeter of the screen works. I can see the same images are there, but can't see anything to the right of that area. it's only white.
    I realized, on contacting Nokia USA that this phone is not released in the US yet. It is a very nice phone, IF I can get it working again.
    Thanks again for your help.
    Ernie

  • Using Pacifist to solve media problem..please help

    I captured a lot of footage and ended up with many files with the extension -av. Now I know that that is bad, but at the time of capture I had no idea. I have been working for months with these files. I just opened my project and they are now all offline. The files are in my drive, but they won't open in quicktime or reconnect through fcp. The only thing I did before opening my project file was install software updates. People are mentioning major problems with Quicktime 7.4.1 and recommend that I downgrade using Pacifist.
    Does it sound like the downgrade will solve the problem?
    Has anyone ever had other unforeseen problems after using Pacifist?
    Thanks.

    Check to see how that drive the media is capture to is properly formatted as "Mac OS Extended." It sounds as if it may be formatted as "FAT32."
    -DH

  • Please help - HP Pavilion running Linux has six jacks on the back - which is speakers ?

    I need to know which 1/8 " jack is for speakers and whether a driver is needed, or what the setup procedure in Linux is.
    Thank-you very much.

    Hi:
    Without the full model # of the PC, there is little we can do to assist you.
    Normally the audio out jack for a regular pair of desktop stereo speakers is light green.
    You can check the audio device manufacturer's driver page (if any) for Linux drivers.
    Paul

  • Please help with importing packages

    I am trying to learn the Java Advanced Imaging (JAI) API. I have successfully installed java2SDK.
    I downloaded the JAI library (jai-1_1_2-rc-lib-windows-i586.exe) and have installed it.
    After installation, I added the JAI lib to the CLASSPATH.
    CLASSPATH = C:\java\jai-1_1_2-rc\lib
    when I try compiling a demo program from this tutorial page:
    http://developer.java.sun.com/developer/onlineTraining/javaai/jai/src/FrontPage.java
    I get these errors,
    package javax.media.jai does not exist
    import javax.media.jai.JAI;
    how do I know which directory to copy the JAI lib files to so that
    this import statement can find JAI
    import javax.media.jai.JAI;
    please help if you can
    Thanks
    John

    Hi,
    You have to give the full path of the jar file in classpath along with the jar file name
    something like CLASSPATH = C:\java\jai-1_1_2-rc\lib\jai.jar ...see the jar file name and include that also

  • Driver for Printer HP LazerJet 6L (Apr., 1998) Please help!

    Please help! I have a notebook (2012, with Windows 7) and an old (but good) printer HP LazerJet 6L (Apr., 1998). I want this printer with my notebook. Disk with driver was lost during re-moving. At the HP site I foung 4 drivers: HP LaserJet 6L Gold Printer, HP LaserJet 6Lse Printer, HP LaserJet 6Lxi Printer, HP LaserJet 6L Pro Printer. Which of them is suitable for me? Thanks in advance.

    Hi, Welcome to hp forums and enjoy your stay, feel yourself like home here!
    I am very sorry to hear this, I will try my best to help you, I am always glad to help!
    Please follow the steps i provided below:
    1. http://windows.microsoft.com/en-ca/windows7/automatically-get-recommended-drivers-and-updates-for-yo...
    Now refer to the below link and right click your printer device
    2. http://pcsupport.about.com/od/windows-8/a/update-drivers-windows-8.htm
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Adobe media encoder error message - please help

    I purchased adobe creative suite 4 web standard in january of 2010.  I'm in the process of learning how to use all the features.  I am building a website in dreamweaver and wanted to create and import a flash movie.  I opened adobe media encoder from my program files.  I added an avi file to the encoder, chose a medium quality for web, and clicked Start Queue.  I then got the following pop up error message:
    Error Message:
    Adobe Media Encoder Debug Event
    Adobe Media Encoder has encountered an error.
    [..\..\Src\Win\WinFile.cpp-754]
    Please help.
    Thank You.

    This forum is for "flash media live encoder". For Adobe Media Encoder related queries go to Creative Suite forums.

  • I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    "Where do I find my hundreds of dollars of downloads I have done since 2005?"
    They will only be where you put them  If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
    The itunes store is not global at all, never has been. You cannot redownload your content from another country.  You can only use the countrys itunes store for the country that you are physically located.

  • Pre8 won't link to/recognize files in Media tab of Organizer - please help

    Today I opened a project that I have been working on and it would not link to some or all of the files that have previously loaded successfully on numerous occasions. The project asked me to locate the files, and when I did, it said they could not be linked because they'd been created with one audio track and now had two. However, these were the exact same files that I've been working with, and have not changed them at all. When I did open the project (it was unrendered even though it had been previously rendered) the files were still in the sceneline and timeline and in the project section of the organizer tab, and appear to work in the movie, but do not show up visibly in the media section, where I just get icons but can't see the image.
    This appears to be a problem with my program, because I opened older projects and even created a new one to test with, and same problem with loadng media. It will load, but won't recognize, and when I try to drag into the project,it opens a dialog box asking where the file is, but won't take it.
    The only thing that I did immediately preceding this was last night, I tried to load an itunes mp4 audio file into the project, but it wouldn't take because it said the file type was not supported or the codec was wrong.
    Please help with this. Could the program be corrupted? If so, how can I fix and not lose the projects I have made?
    Thanks, Michael

    Going back some years, I tried using USB externals for editing to/from, but found two problems:
    1.) frequent read/write errors, usually delayed write failures. Many others were having the same problems.
    2.) the speed was so horribly slow.
    I then went with FW-400, and got no read/write errors, but the speed, though faster, was still too slow for me. When FW-800 came out, I experimented with these, and have been using them ever since. Now, eSATA would be even quicker.
    I wonder if you suffered from some errors on the USB drive. I'd first use G-Spot, a free utility, to check the audio in your files, to see how many channels are shown there. If you find that the files are now showing a single channel, instead of two, you might be able to convert the files with a program like Prism, or DigitalMedia Converter, to 2-channel. You'd want to Move your source files to another folder, and then convert to the same file names back in your source folder.
    One tip on using externals: in your OS, you can set your drive letters. These will always be assigned the same, based on the drive's I.D., so that F:\ is always F:\, and G:\ is always G:\, regardless of what else is plugged in, and the order they are turned on. This will keep PrE from asking where is file xxxx.avi, etc.
    Good luck,
    Hunt

Maybe you are looking for