Creation of sales order document

How to create a sales order document using VA01?Give me the steps?

Hi,
Please search before posting any thread,
[http://help.sap.com/saphelp_ides/helpdata/en/47/ef8c7c124811d2806f0000e8a495b3/content.htm]
Regards,
Durgesh.

Similar Messages

Issue with creation of sales order in CRM system

Hi Experts,
Here are the details of the process we followed
1.     We found a Function Module u201CBAPI_BUSPROCESSND_CREATEMULTIu201D which is used to create a sales order in CRM.
2.     We have set a Break point in the FM u201CCRM_ORDER_MAINTAINu201D and tried to create a sales order using the transaction u201CCRMD_ORDERu201D. For this the parameters we have given are
a.     sold-to-party
b.     ship-to-party
c.     quantity
d.     product
And after this we have saved the order and the order is saved and in the debug mode we have the parameters in u201CCRM_ORDER_MAINTAINu201D and we found all these     parameters in the FM.
3.     After this we have given all the parameters mentioned above in the FM u201CBAPI_BUSPROCESSND_CREATEMULTIu201D and still the order is not created, gave an error message saying that CRM_ORDER: Incorrect values in the interface object.
4.     We checked the CRM_ORDER badiu2019s interface and it is having only header guid to be given. We gave this header guid also in the FM u201CBAPI_BUSPROCESSND_CREATEMULTIu201D and then it gave a different error saying that : Document cannot be saved.
5.     Finally we are not able to know the parameters to be passed to the FM to create an order.
Any inputs will be highly appreciated.
Thanks a lot in advance.
Lakshman.

Hi Easwar,
Now i am able to create a sales order by passing the parameters to "BAPI_BUSPROCESSND_CREATEMULTI" and the parameters i am passing are Process_type in the ORDERADM_H, parner_fct (partner function), partner_no , Quantity and prod_ordered (product name) but after creation of sales order using my report program and if i see the sales order uisng transaction crmd_order (using transaction ID) or crmd_orderadm_h(using headerguid) or crm_order_index, only the PROCESS_TYPE is updated but the remaining parameters which i passed like QUANTITY,PRODUCT NAME,PARTNER NUMBER are not present in the sales order. I am providing the code which i have written for creation of the sales order. Can you please look into it and tell me where i might have went wrong??
*& Report ZCREATEORDER_TEST
REPORT ZCREATEORDER_TEST.
DATA : LV_HEADER_GUID TYPE GUID_32,
WA_HEADER            TYPE         BAPIBUS20001_HEADER_INS,
ITAB_HEADER          TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_CREATED_PROCESS TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_OBJECTS_TO_SAVE TYPE STANDARD TABLE OF BAPIBUS20001_GUID_DIS,
ITAB_PARTNER        TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INS,
lt_product_i TYPE STANDARD TABLE OF BAPIBUS20001_ITEM,
wa_product_i type BAPIBUS20001_ITEM,
lt_schedlin_i type standard table of BAPIBUS20001_SCHEDLIN,
wa_schedlin_i type BAPIBUS20001_SCHEDLIN,
ITAB_INPUT_FIELDS TYPE TABLE OF bapibus20001_input_fields,
ls_inputfields TYPE bapibus20001_input_fields,
WA_PARTNER          TYPE BAPIBUS20001_PARTNER_INS,
ITAB_RETURN          TYPE STANDARD TABLE OF BAPIRET2,
WA_OBJECTS_TO_SAVE LIKE LINE OF ITAB_OBJECTS_TO_SAVE,
           "To store the Objects to be saved.
WA_CREATED_PROCESS LIKE LINE OF ITAB_CREATED_PROCESS,
ITAB_SAVED_OBJECTS   TYPE STANDARD TABLE OF BAPIBUS20001_OBJECT_ID,
WA_SAVED_OBJECTS    LIKE LINE OF ITAB_SAVED_OBJECTS,
GC_X type c.
gc_x = 'x'.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
    ev_guid_32 = lv_header_guid.
CLEAR : WA_HEADER.
Passing the respective values from the Header table to internal table.
WA_HEADER-GUID          = LV_HEADER_GUID.
WA_HEADER-PROCESS_TYPE = 'ZTA'.
APPEND WA_HEADER TO ITAB_HEADER.
*Appending the values to the ITAB_HEADER.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PROCESS_TYPE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
*ls_inputfields-ref_handle = '0000000000'.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CHANGES MADE
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'LOGICAL_KEY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
   ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'QUANTITY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
   ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CHANGES MADE
WA_PARTNER-REF_GUID = LV_HEADER_GUID.
WA_PARTNER-REF_KIND = 'A'.
giving the partner function and partner no 000000038 for slod to party
WA_PARTNER-PARTNER_FCT = '00000038'.
WA_PARTNER-PARTNER_NO = '10017'.
APPEND WA_PARTNER TO ITAB_PARTNER.
*"ADDING VALUES for the product
wa_product_i-header        = lv_header_guid.
wa_product_i-handle        = '0000000001'.
wa_product_i-ordered_prod = '12000014'.
wa_product_i-mode          = 'A'.
APPEND wa_product_i TO lt_product_i.
*"ADDING VALUES for quantity
wa_schedlin_i-quantity   = 30.
wa_schedlin_i-handle = 1.
APPEND wa_schedlin_i TO lt_schedlin_i.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
*ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'REF_GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PARTNER_FCT'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PARTNER_NO'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
TABLES
    HEADER          = ITAB_HEADER
    ITEM            = lt_product_i
    RETURN          = ITAB_RETURN
    PARTNER         = ITAB_PARTNER
    INPUT_FIELDS    = ITAB_INPUT_FIELDS
    CREATED_PROCESS = itab_created_process
    SCHEDULELINE    = lt_schedlin_i.
READ TABLE ITAB_CREATED_PROCESS INTO WA_CREATED_PROCESS WITH KEY GUID = LV_HEADER_GUID BINARY SEARCH.
WA_OBJECTS_TO_SAVE-GUID = WA_CREATED_PROCESS-GUID.
Appending the Guid of the contract to be saved to the internal table
APPEND WA_OBJECTS_TO_SAVE TO ITAB_OBJECTS_TO_SAVE.
CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
EXPORTING
    update_task_local = space
    save_frame_log    = GC_X
TABLES
    objects_to_save   = itab_objects_to_save
    saved_objects     = itab_saved_objects
    return            = itab_return.
Calling the Standard BAPI to Commit the transcation.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
I have debugged the above code, all the values are passing are passing to the FM "'BAPI_BUSPROCESSND_CREATEMULTI'" and these passed to the CRM_ORDER_MAINTAIN and then to CRM_ORDER_READ which are called inside the "'BAPI_BUSPROCESSND_CREATEMULTI'". Finally the sales order is created but not able to see all the values that i am passing except PROCESS_TYPE.
Thanks a lot in Advance,
Lakshman.

Creation of Sales Order and Service Contract from Inbound IDOC

Hi Experts,
My requirement is to create a Sales Order as well as a Service Contract from one Inbound IDOC. I am getting the Inbound IDOC from a third Party. The message type is ORDERS and Basic Type is ORDERS02. How ever i am using an extension type IDOC which carries all the required data for Sales Order and Service Contract. My requirement is like, to create a Sales Order first.
I have created a Z FM which is attached to the Process Code and subsequently to the message type. Inside the FM i an calling FM 'IDOC_INPUT_ORDERS' for creation of Sales Order. After that i am changing the IDOC data for the Document Type. I am changing the document type which is responsible for Contract Creation.
Then I am again calling the FM 'IDOC_INPUT_ORDERS' for creation of Contract with the help of IDOC data. But here the Contract is not getting created. It's getting failed during the Batch input session.
I need to solve this problem as soon as possible. Please help me. If there are any other options also please share.
Thanks in Advance.
Regards,
Priyabrata

Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata

Regularly auto creation of sales order

Hi All,
Is it possible to define or set auto creation of sales order ? e.g. there 2000 customers that every biweekly Monday will have sales orders created automatically by system, so the user just only see and copy to delivery or A/R invoice. TIA
Rgd,
Mark

This can be performed if you use activity management and set sales quotation as a linked document. use one sales quotation but contains multiples row line of items that have different delivery dates can make it possible, but only as reminder, to create sales order,.although manually, you just use copy to and the add the SO. You could also develop addon to make SBO auto creation of sales order.
Rgds,

Va01 creation of sales order

Hi
can i create sub screen in creation of sales order item
in user exit mv45afzz
my requirement is when user click on any line item than than i need to call subscreen with some information
pls guide me on this

HI

Sales realated exits
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V46H0001 SD Customer functions for resource-related billing
V45W0001 SD Service Management: Forward Contract Data to Item
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company code sales
V45L0001 SD component supplier processing (customer enhancements)
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45E0001 Update the purchase order from the sales order
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool MV45A
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for product selection
SDTRM001 Reschedule schedule lines without a new ATP check
SDAPO001 Activating Sourcing Subitem Quantity Propagation
https://www.sdn.sap.com/irj/sdn/wiki
Check this link
Sail

Creation of sales order with reference to inquiry no.

Hi gurus!
Im having trouble in creation of sales order with reference to inquiry no. The scenario is like this one. In va11(creation of inquiry no.), in the field of SERVICE LEVEL, i indicated a value. after the creation of inquiry no, i want to create a sales order with reference to inquiry no. But the problem is, the SERVICE LEVEL field does not have any value. What is the main problem to this scenario? is it the VARIANT CONFIG or the program itself? please help its urgent
Regards,
Mackoy

Dear Machoy,
In IMG under
Sales and Distribution -> Sales -> Sales Documents -> Maintain Copy Control for Sales Documents -> Copying Control: Sales Document to Sales Document
or Transaction VTAA
http://help.sap.com/erp2005_ehp_02/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
If you create a sales document with reference to a preceding document, the system copies nearly all the data from the preceding document. The data in the preceding document originally comes from the customer and material master records. Because the data is copied from the preceding documents into the sales document, any changes that have been made to the master data records since the preceding document was created are not included in the sales document. If, when you create with reference, you add another item to the document that was not in the preceding document, the system determines the data for it from the master records, such as the material master or info record.
You have created an inquiry and a quotation with reference to this inquiry. Before you created the quotation, you changed some data in the material and customer master records.
You have changed the material description in the material master record. This description is stored in the sales document at item level.
You have changed the terms of payment in the customer master record from ZB01 to ZB03. These are stored in the sales document at header level.
When you created the inquiry, the system copies the original material description to the item. If you enter another item in the quotation for the same material, the system displays the new material description for the new item.
However, the system continues to propose the original term of payment, that is, ZB01, for all items including the new one. This is because it is copied from the header of the preceding document into the header of the quotation, and the change in the customer master record has no affect on the quotation.
Regards,
Naveen.

Need of User-Exit in the creation of Sales Order(VA01)

Hi,
In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
Thank you.

the following program are the user exit for billing.
we often use RV60AFZC and RV60AFZZ.
RV60AFZA
RV60AFZB
RV60AFZC
RV60AFZD
RV60AFZZ
RV60BFZA
For Sales order
Pricing, item addtion deletion
MV45AFZZ
First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
Hope this helps somehow.
In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
regards
vinod

Auto Creation of Delivery with PGI and Billing after creation of Sale Order

Dear Experts,
I am having one Req. like...After creation of sales order ..automatic Delivery and Billing should be done.
Right now i m able to create automatic Delivery but PGI is not happening for that delivery.
Is there any configuration I have to do ... or by any user exit we can get the solution.
Can u please provide me solution for this.
Regards,
Sanket.

Hello,
yes, you can create the PGI Atomatically by BATCH JOB using the program nder the VL23 transaction code.
Goto the Transaction code SM36 to create a job for the program SAPMSSY0 which is the program for the AUTO PGI
create a variant for the Delivery document types and sales organisation combinatioans and add this variant to the bath job created in SM36.
Set the time of the Job to run after every 5 minutes, so once the job exected it will pcik all the Deliveries which are pending for the PGI.
After the PGI done you can run SDBILLDL program to create the Billing for all the document which were cleared and due for Billing.
Hope it is clear for yo, please revert if you need frther clarification .
santosh

Get OTF data for a sales order document

I have a problem in getting the information of the created sales order document number as OTF data. I need this OTF data so to convert into PDF format using function module 'CONVERT_OTF_2_PDF'. My situation is i am keeping a parameter for sales order document number . when i execute the report after giving a sales order document number, i should get the OTF data .

Hi!
Firstly you have to define what technique is used for creation of sales order as printed document - smartform or sapscript. Then proceed as follows.
In case of smartform:
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZFORMNAME'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf[] = w_return-otfdata[].
In case of sapscript:
options-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
options = options
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
   TABLES
     otfdata                        = i_otf
   EXCEPTIONS
     unopened                       = 1
     bad_pageformat_for_print       = 2
     send_error                     = 3
     spool_error                    = 4
     OTHERS                         = 5.
i_otf -
Regards,
Maxim.

HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

Dear All,
I want to contol on creation of Sales order with reference to earlier SO? While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
Nikhil

Nikhil Deshpande,
If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
Thanks,
Mariano.

Sale order document flow-u0091Service Documentsu0092 is coming which should't aper

New Issue with Sales order document flow:
When linking from a sales order in document flow, we were reviewing why the description information varied. In looking at different values, we clicked on a new item within document flow that allows you to like to Service Documents. This is new in 6.0, or it was previously deactivated in 4.6C. If you link from a sales order to a service document, in ECC 6.0, you will get a short dump because the document flow is so great (viewing order #any in VA03 and use document flow and then select the service documents button as seen on the screen below
A Short dump will occur in program SAPLDOCUMENT_FLOW_ALV.
Here in ECC 6.0 is how it looks from sales order 9806:
Documents created from 2004 through 2007 are coming up as linked to this sales order and that is incorrect. There is some type of linkage issue. In the 4.6 C environments, the service documents link is not visible from document flow.
Can any body functional / technical Help on this urgent???

Hi Sanjay,
Go to the order VA03 --> Environment --> status overview. The exact status of the header and item can be found here. You may have chances to know why the status is being processed.
Also
Check whether you have checked 'document flow update' field at item level in copy control
Check your settings for completion rule in item category
If it is due to incorrect status message, run report SDVBUK00. That might fix the error. It is recommended to run this first in test mode.
Br, Sats.

Blocking RdA creation from Sales Order Schedule Line

Hi Gurus,
please do you know if there is a way to block the RdA creation from Sales Order schedule line, for TAS item category? I tried with Header Delivery block without quantity confirmation but even if quantity on schedule lines are not confirmed, RdA is created anyway.
Thank you very much
Kind Regards
Andrea

thank you

Commit error while transferring Sales order Document to GTS

Hello,
We faced a transfer error while transferring sales order document to GTS.
When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
For sales document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
      DESTINATION cs_transfer-rfc_dest
For billing document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
      IN BACKGROUND TASK
      DESTINATION cs_transfer-rfc_dest
      AS SEPARATE UNIT
So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
Thanks in advance
Serhat
Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AM

Dear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs

Restrict creation of sales order for specific customer

Hello All,
I want to restrict creation of sales order (of particular sales order type) for specific customer, please let me know how can I do it.
Your early reply will be highly appreciated.
Thanks & Regards,
Mahavir

HI
As per My knowledge it is not possible in Standard SAP , you need to go with Enhancement
Go to SE38 : MV45AFZB, User Exit: USEREXIT_CHECK_VBAK
Regards,
Prasanna

Creation of sales order- screen exit

Hi all,
I have a requirement like while creation of sales order need to develop one screen field in additional data B.i developed that field. and now while creation of sales order it will save in vbak table. now the problem is that screen field will be enable in that particular sales order type only otherwise it will be disable. how to do this. screen exit.

Hi
See SAP Note 209278 - Display of customer-specific fields in sales doc
Check also, SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B' and SAP Note 386694 - Additional data not displayed in screen 8459 and 8309
Regards
Eduardo

Creation of sales order document

Similar Messages

Maybe you are looking for