Creation of Text Element in Custom Script for MEDRUCK
hi,
i have a problem in the scripts, the script is customized one but driver program is standard one.
few text element which are in the page windows but not appering in the output, how can we make them to appear in the output.
can we add new text element without modifying driver program in script,
can any one suggest me any thing for solving this problem.
thanks in advance.
hi,
i havent found any write_form function call in the standard driver program.i think is it is system generated driver program for MEDRUCK.
in my custom form few text elements are defined alredy but they are not appearing in the output, i tried by putting some hardcoded text in those text elements but it doesnt worked.
what might be the reason.
can any one know about this help me solving this problem.
thanks in advance
regards,
pavan
Similar Messages
-
How to end text element in sap script
how to end an text element in sap script
this is the format.
/E text element name
&tablename-fieldname&
text-text-text-text
now if i do not end that text element it is not displayiny my below text , so what to do in this caseGo through the links mentioned below.
http://www.****************/Tutorials/Smartforms/SFMain.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
http://www.sapmaterial.com/smartform_example.html
Re: Hands on SAP Smart Forms
smartforms
Reward points if useful. -
Hi All
Y do we need Text element in SAP SCRIPT ?yes you can.
are you using your own print program or a standard?
Each window will be called by the code so if you have no elements in there all the data is output in the order they appear in the form. -
Dump error when clicked on text elements in SAP Script window
Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
Invalid partial field access: Length is too large
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLSTXK", the system attempted to access the field
"ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
However, a partial field access with a length specification that is
larger than the field length is not allowed.
How to correct the error
Reduce the length used to access the field.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"SAPLSTXK" or "LSTXKFRN"
"TOKEN_COMMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
RekhaHi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel -
How do I Hide the text printed from a standard Text Element in SAP Script?
Hi,
I have created one SAP Script which gets printed from IW33 using a standard print program.
In config the standrad SAP script is replaced by the zsap script.
Since the Zscript is printed from a Standard print program, I had to keep all the text elements used by the original(standard) SAP script.
I only kept the text elemets and commented out the printing part.
But still some values are printing. How do I hide these text element values?
I want to delete whatever its printing from these text element. Icant delete the standard text elemetns , otherwise the standard print program will give error.Hi,
I am not printing any text under these text element in my zscript.
I had to include these standard text elemets as they are called from the standard print program using which my zscript is getting printed.
for example:
/E OPERATION
Under operation i didnot print anything. Still some values which are passed in text element Operation by the print program is being printed in the form. i want to hide/delete these values.
how do I do that? -
Text Element in SAP-Script and Box
Hi Gurus
Q1.what is the meaning of text element's in sap-script.e.g.
/E INSPECTION_STATION_INFO
/E SAMPLE_INFO
/E PHYS_SAMPLES_HEADLINE..
I have to use these elements in my script.i am not able to understand what does it mean?
Q2.how we can draw a Tabular format in Script?
Q3.How we can draw Box?
Thanks in advanceHi,
Text Elements
You can define text elements (window texts) for each window. On the Form: Request screen, choose Edit ® Text elements.
The print program accesses text elements by name, formats them and prints them in the respective window. That is, the program can decide which text elements should be printed in a particular window. It calls these text elements by name to print them. You must therefore change text element names in the print program if you make any changes to text element names in a form.
In the layout of a text element, you can use only the paragraph and character formats defined in the form.
Example of a text element in an order confirmation:
/E ITEM_LINE
IL &VBDPA-POSNR&,,&VBDPA-MATNR&,,&VBDPA-ARKTX&
/ &'Customerarticlenumber 'VBDPA-IDNKD' '&&'Position
/ 'VBDPA-POSEX&
This example shows a section of a main window of a form, with an item line of an order confirmation. The /E in the tag column is used to identify the text as a text element, ITEM_LINE is the name of the text element.
Default Text Element
At the start of a window, you can define a text element without the /E command in the paragraph format column. This text is always printed at the start of the window. It is not necessary to insert this text explicitly via a print program.
For more go to this link: Character formats and attributes
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm
Boxes:
Use the following code
/: BOX XPOS 1 MM YPOS 2 MM WIDTH 20 MM HEIGHT 40 MM FRAME 10 TW.
Box is the command used for printing box in script.
XPOS - x- axis position
ypos - y axis position
http://help.sap.com/saphelp_470/helpdata/en/d1/802ec5454211d189710000e8322d00/content.htm
Regards,
Omkaram. -
Long Text Printing in TEXT ELEMENTS of a Script
Hi,
I am printing the amount in words using Subroutine pool program. This amount is populationg fine in the program(in out_table structure ITCSY). I assigned those symbol for printing in text elements. While printing the last words are not printing.
Here ex: One Crore Thirteen Lakhs Ninety Two Thousand Four Hundred and Ninety Six and Paise Sixty Seven Only--- it has print like this
but it is printing
One Crore Thirteen Lakhs Ninety Two Thousand Four Hundred and Ninety Six and Pa---only. Remaining are not coming.
please suggest how to get the full text.
Regards,
Mahesh.First you need to understand that a variable in a script holds no more than 60 to 70 characters.
so what you should do is, in your subroutine pool declare 4 variables each of size 60 chars, and then move the amount in words 60 chars each and then pass these 4 variables to the script and use these variables to print.
This solves your problem.
Regards,
Termi. -
Error message TD427 (A text element is not defined for form J_1IEWT_CERT)
Hello,
Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
If i try the printpreview through SE71 it shows without error.
Thank You."test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form. -
Creation of WBS Element in level 2 for transation CJ01.
Hello All,
I am able to create WBS element for only one level for the transaction Cj01 through BAPI "BAPI_BUS2054_CREATE_MULTI"
Can anybody tell me how to create the WBS element in the level 2 below the first WBS element.
Thanks,Hi
Check the link:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0451304650DB10061726740868935361End?blog=/pub/wlg/9659
Regards,
Sreeram -
Header text not displayed in script for Quotation
Dear all ,
I am using standard form for quotation printing but the text i enter in quotation header it is not getting displayed in the standard layout of the quotaion . is there any settings i need to do .
pls advise
RamarDear all ,
I am using standard form for quotation printing but the text i enter in quotation header it is not getting displayed in the standard layout of the quotaion . is there any settings i need to do .
pls advise
Ramar -
Can anybody tell me how many text elements are there in sap scripts?
hi all,
can anybody tell me how many text elements are there in sap scripts?Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements -
Error in script : text elements are missing
Hi ,
In my print programs iam uaing lots of text elements for a
zform. I have copied the zform into zform1 and using the same print program and modified the zform1 according to my needs.
I am not using all the text elements in my zform1 script which is passed from the print program.
When i execute my zform1 by using the transaction which inturn uses that print program it gives more messages saying 512, 513 , 515 text elements are missing in form Zform1.
Can anyone tell without touching the print program can i do anything on the script zform1 to reslove this problem.
Please help me on this.Thanks...
Regards,
Rose.Hi,
Ya, whatever Narendra told is right. U nedd to have the text elements in the script if you are calling the same from print program. Just maitain all the text elements with no text it.
Eg:
/: 513
/: 515
Regards,
KK -
Issue with if condition in smartform text elements
Hi all.
iam having a problem in smart forms
itab has 3 fields
id matnr werks
1 a p1
1 b p2
1 c p3
2 b l1
2 c l2
3 q u1
3 l u2
i neead output like in the smart form
-id = 1-
a p1
b p2
c p3
-id = 2-
b l1
c l2
-id = 3-
q u1
l u2
I have aloop in main window
itab into wa_itab.
then i have program lines
iam writing any perform statment insted iam write the code in here
input paramters wa_itab-id
output paramters id
i declared id type zabc-id under global data in global definations
CLEAR : ID.
ON CHANGE OF WA_itab-ID.
*BREAK point.
ID = WA_ITab-iD.
ENDON.
after the program lines i have a text
/: if &id& ne ' '.
---id = &id& ---
/: endif
&wa_itab-matnr& &wa_itab-werks&
now i see the output
-id = 1-
a p1
-id=- i don't need this (&id& has no value)
b p2
-id=- i don't need this
c p3
-id = 2-
b l1
-id=- i don't need this
c l2
-id = 3-
q u1
-id=- i don't need this
l u2
I checked my code if two items have same id the id has no value and you can see the output also
but for some reason its still goinng into the if condition
And also is there away that i can debugg my text elements like in scripts. my break point doesn't take me to the text elements
Thanks1. Move only the ID into one internal table say i_id,
2. Now in your smartform, create a table and loop at i_id into wa_id.
3.Print your ID in a text, &wa_id-id&
3. Now in main area of the table Create a loop with the internal table you mentioned above with 3 elements, say, i_data into wa_data give CONDITION as wa_data-id = wa_id-id.
4. Print your other values &wa_data-matnr& &wa_data-werks&
5. outside main area, clear the work areas.
This should work fine as i use the same logic in one of my current developments!!! -
Hi all,
I have created a window and giving text elements in that window.Now i m Adding a lin of type /E in change editor to use text element.i needed it it to specify text elements in SPRO transaction.
So for that i want to add text elements in Form in SPRO transaction.
Also want to know that is it possible to use condiitons in Text elements?
Suggess me it's Urgent for implement.
<b><REMOVED BY MODERATOR></b>
Thanks
Sanket sethi
Message was edited by:
Alvaro Tejada GalindoHi
Text elements in SAPscript are the individual text components of a form. In the different windows, you can define text elements with different attributes. For printout, the print program accesses them. Text elements can also contain variables (symbols) and SAPscript control statements.
In simple words, Text Elements are the only way to transfer the data from report program to FORM using WRITE _FORM FM.
Check this link(Very Helpful) :
http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db38b494511d182b70000e829fbfe/frameset.htm
You can define the text elements in sap script to group the texts that you want to display...like a condition..
Ex..
/E TEXT1
P1 This is a first text element..
Then use WRITE_FORM function module to call the text element
CALL FUNCTION 'WRITE_FORM'
ELEMENT = 'TEXT1'.
You can also call the write_form function module within a loop..
Check this link(Very Helpful) :
http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db38b494511d182b70000e829fbfe/frameset.htm -
I need an action/script for image resizing with a "special" attribute
Having a headache, nothing work so far the way I want it...
So here's the deal: I have a bunch of psd files and I need them saved as jpegs in a fixed size - 450x590px.
The filename of the jpeg should be the same as each psd and the images should be resized proportionate.
The psds have irregular sizes, some are tall, some are square, some are wide, etc.
I tried using the place function on a template, but that requires my input - choose what to place, then type the filename.
Any ideas?
Thank you for your input!elmoldovano wrote:
So here's the deal: I have a bunch of psd files and I need them saved as jpegs in a fixed size - 450x590px.
The filename of the jpeg should be the same as each psd and the images should be resized proportionate.
The psds have irregular sizes, some are tall, some are square, some are wide, etc.
I tried using the place function on a template, but that requires my input - choose what to place, then type the filename.
So have both Portrait and Landscape images with varying size. and want to create jpeg from them that are 450x590 pixels in size. Can the have Portrait and Landscape orientations. If they all must be Portraits 450px wide by 590px high your landscape images composition will not fair well. For cropping landscape image to portraits image normally crops away to much image content. Content aware scale may work somewhat better then cropping to portrait the introduced distortion may be acceptable.
If Portrait 450x590px and Landscape 590x450px is an acceptable solution. I would go with a cropping solution for there will be no distortion and centered crop composition are usually acceptable. It can also be done with a two step action used by an image processor script. If you download my crafting action package. It has a plug-in script that can be recorded in an action to set a 45:59 centered aspect ratio selection which you follow with an Image Crop step. You run the Image Processor script have the action make the crop and the Image processor to resize the crop to fit into a 590x590px area.
Crafting Actions Package UPDATED Aug 14, 2012 Changed AspectRatioSelection Plug-in script added Path support.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
12 Scripts for actions
Example
Download
Maybe you are looking for
-
Email notifications have stopped and unable to re-...
Email notifications have stopped for 3 accounts where I need to print the bills for company records. Despite emailing and phoning the bills are still not coming through. I could log on to see the bills, but am no longer able to do this. I have tri
-
BAPI for Outbound Delivery Creation with reference to Sales Order
Dear all, I'm on R/3 4.6B platform and to develop an RFC for outbound Delivery creation instead of using the standard VL01N transaction. I've review BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N thread which suggest BAPI_D
-
Hi Friends, How i do solve following message? No clearing accounts specified for company codes C.Code / C.Code Message no. F5A134 Thanks, Best regards.
-
Security Scan found Weak and Medium strength ciphers port 389&636
After a recent security scan on one of our Apple Servers running 10.9.5 (Mavericks) it has reported weak and medium strength ciphers on port 389&636 and also that SSLv2 and SSLv3 is enabled. The Server is running Profile Manager and therefore also Op
-
Does the info panel offer an option to measeure the overall brightness of and image?