Creation of user using su10

Hello gurus,
we can create a new user ID using su10 apart from su01. What is the difference that we can potentially face when we create using su10. Is there any disadvantage by creating this.
Thanks

SU01 is used for Individual user creation and user specific address data maitained.
SU10 is for mass create/chage users, IF all users are idetical or you want change very idetical for all users than use SU10. However user specific details such as First name, Last name, Functions, Emails and so forth is not possible to maintain for individual user in SU10. More over if License type for each user is different in each user than you need to maintain individually.
All parameter and defualt data should be identical if SU10 used other wise you need to maintain separatly for each one in SU01, if not maitained by user throough SU3.
You can configure the LDAP from AD to SAP for solving some the points above.

Similar Messages

SECATT - Mass creation of users with different assigned roles

Hello! I've been tasked with creating an eCATT to do a mass creation of users and each user will have a different role assigned (besides the general roles). We're doing this to test out the different roles we have created. I've done some searching through the forums and found some different ideas but I'm not sure they are exactly what I need. One suggestion was to use SU10 to make the role assignement but I'm guessing I would still need to setup a parameter for each role so I would initially need to know how many roles would be entered. I would like for the eCATT to be able to handle assigning multiple roles to a user with each user possibly getting a different number of roles. Would anyone be able to suggest a way to assign different roles to different users through an eCATT?
Thank you!

Hi Wendy,
To create users, maybe SU01 or SU10 can be used. To assign users to a role, maybe you can try with PFCG.
SU01 and SU10 have the view from the user - for each user, different roles can be selected and assigned to that user.
PFCG has the view of roles - for each role, different users can be selected and assigned to that role.
Hence if you know which roles should be assigned to which users, PFCG might be easier.
Hope such information is helpful for you.
Kind Regards, Qian

Creation of user mysites under different managed paths

Hi,
Regarding creation of user Mysites, can two users have different mysites under two different managed paths?
The scenario for my case is like this:
I've a SharePoint 2013 farm attached to a domain contosso.com. Under that AD, I've created two different OUs (Organizational Units), say org1.local and org2.local. Two users are created under the OUs, the usernames being [email protected] and [email protected]
In my SharePoint 2013 farm I've created a Web Application, say SharePoint - 80, to host the MySite Host Site Collections. I've also created two managed paths under SharePoint - 80, say, /personal and /sites.
Now I want to create two user mysites, for the users created above. My question is that can we form the urls for the user mysites as below:
http://HostSiteCollection1/personal/user1_org1_local (for user1 of OU org1.local) and
http://HostSiteCollection2/sites/user1_org2_local (for user1 of OU org2.local)
Please suggest as we are totally stuck.
Thanks in advance,
Arnab

Hi,
According to your post, my understanding is that you wants to create different MySites under different managed paths.
We can create different managed paths for different MySites for UPA in partitioned mode.
Harbar has written a good blog about creating the MySite host using that same multi-tenant setup.
http://www.harbar.net/archive/2010/09/14/sp2010mt6.aspx
Specifically, you use Set-SPSiteSubscriptionConfig to point to a particular OU for user accounts.
Next, you create a site using New-SPSite bound to that subscription for your MySite Host (e.g. New-SPSite
https://customerA.sharepoint.com/mysites -Template "SPSMSITEHOST#0")
And finally you connect to the UPA Proxy that you previously created in partitioned mode to synchronize users with that particular subscription using Add-SPSiteSubscriptionProfileConfig -ID <Subscription ID> -SynchronizationOU CustomerA -MySiteHostLocation
"https://customerA.sharepoint.com/mysites".
For more reference:
https://social.technet.microsoft.com/Forums/office/en-US/820b1937-4b83-4fd3-8997-118ea13e23ef/sharepoint-2013-my-sites-for-host-based-site-collections?forum=sharepointgeneral
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Creation of role using T-code PFCG in R/3

Hi Experts,
I have created a Role using PFCG inorder to give acess only to three T-codes(PZ09. PZ80,PZ88).
so i have created a role intially using PFCG and incorporated PZ09 tcode in it and assigend the Role to users in R/3. it is displaying the TCode(PZ09) in Portal.
Now again i have added PZ80 & PZ88 to the same Role in R/3, but now i am getting an error:
Infotype 0000 does not exist.
but whereas when i assign SAP_ALL they(PZ88 & PZ 80) are working fine.
Is they anything i can do so that i can avoid assigning SAP_ALL Profile to the users and eliminate the Error "Infotype 0000 does not exist.
Thanks Inadvance,
Regards,
Siva

Hi,
Thanks for your reply,
Creation of role using T-code PFCG in R/3
The above link has solved my issue, Thank you!
Regards,
Siva

Batch creation of users

Hello,
I need to register 15.000 users in my Portal. Noway I'm going to do this by hand.
I followed some discussion about user creation but still have some problems.
I create users using:
-portal30_sso.wwsso_ls_private.get_default_user_config
- portal30_sso.wwsso_ls_private.ls_create_user
- wwsec_api.activate_portal_user
This works fine and I can login. But ..
when I try to add the Account Information with procedure wwsec_api.modify_portal_user this has no result. The PDK-documentation is not correct because I need to specify more parameters than in the example. Netherless when I do this I still cann't look up the data under Account Information when the user logs in.
My second question concerns the last login date/time of a user. Which function is available to deliver this handy info. I want to show changes in my site since the last login of a user.
My third question, oh boy, concerns notification. Although perhaps not an issue for this discussion group it looks like Portal has some kind of mail notification system but where and how to use isn't clear for my. Maybe you could give me a brief explanation for this feature.
Thanks, DJ
null

can you post me an example of how you do this?

Problem regarding the creation of Table using CSS.

Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
Madhavi

Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

Error during creation of user

Hi!
I am using USERS_GEN to generate a user in organizational structure from an existing SU01 user. When I first did this it worked fine. After that we removed the user from the org.structure. Now when we try to generate it again from USERS_GEN we get the message "Error during creation of user....central person already exists".
When I look at that CP I see that is already exists. I need to create a position under an org. unit and I need the already created CP to be allocated to that position.
How do I do that?
Sincerely
Anders Öhrling

Hi
Which SRM version are you in ?
However you can delete the CP via Function module HR_CENTRALPERSON_DELETE but this central persons are stored in HRP1001 table .
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 9, 2008 12:56 PM

Is it possible to add a user using the RESTful Web Services SDK

Others have asked before about user management features in the RESTful Web Services SDK. However I can find no answers or links which provide an answer to the question 'Is it possible to add a user using the BI 4.1 SP2 RESTful Web Services SDK'?
Any help would be appreciated.
Regards,
Steve

Hi Steve
Unfortunately, not possible. The BI RESTful can only get "stuff" that is already there. I suppose this would fall under some sort of "Object Creation" API and that is not there. Yet. Rumors abound, but nothing firm. Just as a BTW.; the Business Intelligence platform RESTful Web Service Developer Guide 4.1 is here:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_bip_rest_ws_en.pdf
SAP Web Intelligence RESTful web service SDK User Guide, SAP BusinessObjects Business Intelligence platform 4.1
SAP Crystal Reports RESTful web services - SAP Crystal Reports RESTful web services
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Automated vendor block on creation without user inputs

Hi All,
I want to block the vendor in creation without user inputs:
Not in T-code mk01<extras<blocked data, and definiately not after creating the vendor and using t-code MK05.
How i can change a field in table LFA1 while creating the vendor.
the field that i want to set is LFA1-SPERM (for all purchasing Org).
Please suggest if you have any ideas how this can be done.
Thanks,
Mamta

Hi,
Not sure your issue was solved already.
However, if not resolved already try this
create an explicit enhancement in include MF02KFV0
ENHANCEMENT 3 ZFI_VENDOR_CREATE.
IF SY-TCODE = 'MK01''.
LFA1-SPERM = `X`.
ENDIF.
ENDENHANCEMENT.
Enhancement Spot :ES_MF02KFV0
Program: MF02KFV0
Enhancement Implementation type: Dynamic Enhancement Point
Enhancement Implementation POint: \IC:MF02KFV0\EX:VERBUCHUNGSAUFRUF_02\EI
Regards
Raja

How to let SAP user use SSO to access Application in DMZ?

Hi All,
Our J2EE application is running on a system in DMZ which can not be connected with LDAP. So I am wondering if it's possible to let SAP user use SSO to access our application.
After talking with my colleague I think the only way is to import SSO public key to our WebAS and create user in UME and then assign user to the corresponding public key, but anybody know where to download SSP verification file or is it allowed to download and import into another system at all?
Regards,
Bin

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

Is it possible to share an aperture library with different users using osx server.

is it possible to share an aperture library with different users using osx server.

Not really. You should not be sharing an Aperture library over a network. It's not designed for that and you'll likely corrupt your library at some point.

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?
We are two people using three difrent Macs, 1 Iphone and 1 Ipad with separate USERS on each Mac but sharing the same Apple ID: xxxxxx
I set up the first user to iCloud and it was OK but when I set up the second user to use iCoud the first users's info gets mixed with the second user's info?
Do we have to set up a diffrent Apple ID for each other?
Sometime ago I added my friends E mail (yyyyy) to the main Apple ID (xxxx) as for using his E mail account (to separate our e mail accounts, and it's working ok) but now when I try to create a new apple ID whith the same friend's e mail (yyyyyy) it says that his mail (yyyyy) is already an apple ID when the Apple ID is really my E mail (xxxxx)... any clue?
Thanks

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

TS5223 can I have multiple users use one apple account?

can I have multiple users use one apple account?

I interpreted his post to mean that he meant multiple human users, not multiple devices. Hopefully, he'll clarify.

Creation of user using su10

Similar Messages

Maybe you are looking for