Creation ztable

hai all,
my table name is zbatch.
contains 3 fields.
fields    dataelement
zbatch    charg
zmax      charg
zmin       charg
save   and check the syntax.
raise the errors like,
1)   field zbatch : structured type charg cannot be used in db table zbatch
2)   field zmax : structured type charg cannot be used in db table zbatch
3)    field zmin : structured type charg cannot be used in db table zbatch
4)   error in code generation for creating table zbatch in the db
5)   table zbatch(statements could not be generated).
please solve the errors

CHARG is a structure and you are trying todeclare a field of structure type and this is incorrect way. If you want CHARG structure just include it in your ZBATCH.
Give .INCLUDE as field name and give CHARG as dataelement... it will give all the fields copied into your table..

Similar Messages

T.code creationn for ztable.

i need to create t.code for (ztable)table maintance...
in that t.code creation we should not use SM30 .
since the user doesnot have access to SM30.
pls help me out..

1)Write a program and give it a tcode
2)Call the following FM to maintain the table:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
 action = 'S'
* CORR_NUMBER = ' '
* GENERATE_MAINT_TOOL_IF_MISSING = ' '
* SHOW_SELECTION_POPUP = ' '
 view_name = 'ZSLO_RET_DISPO'
* NO_WARNING_FOR_CLIENTINDEP = ' '
* RFC_DESTINATION_FOR_UPGRADE = ' '
* CLIENT_FOR_UPGRADE = ' '
* VARIANT_FOR_SELECTION = ' '
* COMPLEX_SELCONDS_USED = ' '
 CHECK_DDIC_MAINFLAG = 'X'
* SUPPRESS_WA_POPUP = ' '
* TABLES
* DBA_SELLIST =
* EXCL_CUA_FUNCT =
EXCEPTIONS
 CLIENT_REFERENCE = 1
 FOREIGN_LOCK = 2
 INVALID_ACTION = 3
 NO_CLIENTINDEPENDENT_AUTH = 4
 NO_DATABASE_FUNCTION = 5
 NO_EDITOR_FUNCTION = 6
 NO_SHOW_AUTH = 7
 NO_TVDIR_ENTRY = 8
 NO_UPD_AUTH = 9
 ONLY_SHOW_ALLOWED = 10
 SYSTEM_FAILURE = 11
 UNKNOWN_FIELD_IN_DBA_SELLIST = 12
 VIEW_NOT_FOUND = 13
 MAINTENANCE_PROHIBITED = 14
 OTHERS = 15
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and you job is done...

In Ztable creation, How can we display error message for a 'To date' field.

Hi all,
I have a requirement like this.
There r two fields in ztable. From date and To date.
The field 'To date' in table ZKM007 is taking before date than From date field.
To date should always be greater than from date i need to throw an error or don't allow to enter date if date is less than From date.
How can we do this?
Can any one help on this?
Rewards to all.
Thanks & Regards,
Anu.

I have written below code at event "Creating a new entry" (05) in table maintainance generator.But it is not working. If we give the to date < From date ,
it is saving.
Can any one help on this code? Pls Give me code And which event i have to put this?
***INCLUDE LZEXE3F01 .
FORM AT_entry.
IF ZEXE3-TODATE LT ZEXE3-FROMDATE.
MESSAGE I001(0) WITH 'ENTER TO DATE GREATER THAN FROM DATE'.
ENDIF.
ENDFORM.
Rewards to all.
thanks
Anu.

Creation of ztable

Hi,
I am creating ztable with field
zemail data element as 'URL' getting error as
Table ZTABLE: Key length > 120 (Restricted functionality)
Message no. DT214
Diagnosis
The key length, i.e. the sum of the field lengths of all the key fields of the table, is more than 120 bytes.
System Response
This is a warning.
Procedure
Note the following restricted fuctionality for this table:
- Table contents cannot be transported by specifying key values, at
best by specifying generic key values with a maximum length of 120
bytes.
- The table may not be used as the base table of a lock object.
Thanks,
Asha

Asha,
Warning in SE11 - Defining tables.

Creation of a ztable

Hi,
what is the purpose of a ztable. when would we be pushed to create one. how do we create it like is it going to se11 enter a table name and create.
centrino

Hi Centrino,
Most of the tables in SAP are appliaction specific. Suppose you want a cross application table having data from FI, MM, SD in 1 table the you could design your own table. You might also create a ztable to fill your own data.
In BW context a ztable is created as a staging table on the R/3. It would contain data that is extracted from various other tables using function modules based on some logic. This table would then be used as a datasource for passing data to BW.
Bye
Dinesh

Creation of function module for updating the ztable

Hi,
I am sending the requirement for ceation of function module for updating the ztable.
Requirement----
Table Updation rule (New record)
While creating a new record the calling function will export the following to the table handling function.
Table field     Probable Values
ZORDERNO------->     Sales Delivery no in case of sales orderShipment no in case of transfer order
UNAME----
>     User ID
ZORDTYPE----
>     SALEOR in case of sales orderTRANSF in case of transfer order
ZREFDOCNO----
>Sales Order no in case of sales orderPurchase Order no in case of transfer order
ZREFDOCNO1----
>Delivery no in case of transfer order
The table handling function will calculate the following fields
Table field     Probable Values
ZREQNO----
>Running serial number (incremented by 1 for each new record)
ZREQDAT     -
>System date
ZREQTIME----
>     System time
ZSTATUS----
>OPEN (for all new records)
Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
Table Updation rule (Status Update)
While updating a record the calling function will export the following to the table handling function.
Table field     Probable Values
ZORDERNO----
>Sales order no in case of sales orderShipment no in case of transfer order
ZSTATUS----
>CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
The table handling function will calculate the following fields
Table field     Probable Values
ZSTATDAT----
>System date
ZSTATTIME----
>     System time

Do you have to create/update new record in Ztable through Function Module ?
or you need to write FM only for validation?
Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
Let me know clearly what exactly u need ?
Regards,
Kiran

Ztable creation & deletion error

Hi
I had a ztable which I had deleted from DEV,but when i am trying to craet a new ztable with same name,its not activating it,& giving me a error that already the same name table is there in database.
So i want to know how to delete this table from database completely,so that I can make its as a new & activate it,I have same table in PRD too,i need to make it with same name.
In se14 the table delete options are non-editable,so from where to delte it completly.
Please tell me how to do this?
regds
vipin

I m working in development server,initily deleting the table from se11 i tryed to create the new one,but after creating its wa snot letting me to activate me,& giving me the same error or aleary same name database exits,so I tried to activate it through se14,which was also not happeing,& even not letting me to delete the database,as every thing was disbaled.
so how shd i work it out.

Tcode creation for Ztable

Hi,
I got a requirement that to create a transaction ZAM0007_D for table zam007
a.Authorization object: S_TCODE with transaction ZAM0007_D
b.Use Query generated as program name
how can i add these requirements to the ztable .Please let me know

Hi,
Follow below steps.
1. Create the table maintanance generator for your table.
2. You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Regards,
kishore

SOX complaince for ZTABLES creation

Dear All,
Is there any restriction on creating ZTables in SAP (not about naming conventions)
Does ZTABLES has to be created only to meet funcitonal perspective so that in complaince with SOX,,
is it true that ZTABLES should not be created for techncial purposes as they are not in line with SOX complaince
REason for coming up with these questions is my peers are finding fault in my program stating that I had created zTABLES for my techncial convneince and it should not be done
My requirement is
Actually I have to develop a Report which has to display 700 entries
like
Account num      descripton             amount
10000                   desc1                      100
145678                 desc2                      230
And so onu2026..
But in no particular sequence like ascending order 1u2014700 and in that particualr sequence no table is holding data
So in this case I have to fill a internal table itab
Like
Wa_itab-acountnum = 10000
Wa_itab-description = desc1
Wa_itab-amount = 100
Append wa_itab to itab.
Like this 700 times right.
So instead of writing 700 append statements what I have done is I uploaded them into ztable(through excel sheet
Hardly 5min job ) and used a Select query to fetch 700 entries from the ZTABLE
But my peers are objecting for creating a ztable, they say according to SOX u cannot create ztables only for   tech requirements ZTABLES should be created only if they have functional requirement and et all they are saying
So I want to know how far they are true

>
Sri Lakshmi Naidu wrote:
> But my peers are objecting for creating a ztable, they say according to SOX u cannot create ztables only for   tech requirements ZTABLES should be created only if they have functional requirement.
> So I want to know how far they are true
Absolutely rubbish. SAP has tables TVARV & TVARVC tables, please ask your colleagues what functional requirement do these tables serve?
I have seen many a projects in which they have custom tables for maintaining constants. Pure technical purpose.
Definitely creating tables eats into the valuable space of the database, but creating one table doesn't K.I.L.L anyone.
BR,
Suhas
PS: I had worked on a project which was SOX complaint & nobody questioned us about the utility of a particular table as long as we had maintained proper authorization group in the TMG

Ztable creation

Hi
I have created a Z Table.
i have updated this table with few entries.
Now again i have created few more fields in this Table.
While activating, an error is pronpting ..
"table is not yet classified".
I have used SE14 to adjust the table and activated..
Still i am facing this error message.
What to do now..????

Hi,
- Goto se11.
- Then click on "Currency/Quantity Fields" tab. You can see the Reference table and Ref. field columns. You will notice that the currency field and quantity field is prompting for an entry.
Otherwise, can you give us more information of the error from the activation log ? Thanks.
Regards
Kir Chern

Ztable creation & Query creation.

Hi,
Anyone please explain me what's the meaning for Z table.
In what way it differs from standard SAP table?What are the stpes for creating the table.If it contains the datas of 2 or 3 tables,Why shouldn't I create a query?
Under which situations I should create a query?and when to go for Z table?
Thanks in advance
Raj.S

Hi Dear,
Z table are those table which we create when we are not getting our company need fullfill from existing tables of SAP
eg. table having fiels of PAN no will not be there in SAP then you may need to create your own.
to create your new tabel try SE11-> give table mane -> press create -> if you have done SQL coding then you can work on it smoothly.
2) for customized reports requirement of ur users you need to work for own queries work with SQ01, SQ02,SQ03
regards
Sumantra

Dialogue program to create/modify entries of ztable

hi experts,
i want to create a ztable. After creating the ztable i want to create an dialogue program using that dialogue program i have to create/modify entries of that ztable using text box and push button options.
can anybody having sample coding pls send me.....
thanks in advance,
ravi

Hi Ravi ,
Instead creating the Dailog Program u can creat the Table Maintanance Generator (TMG). Here u will have all the option of creation, deleting , modifying the record.
In se11 main screen go to utilities:-> Table Maintanance Generator .
here u have to enteg the Function group name and screen NO. system wil generate the dialog program for u to maintan the data in that table. Then go to T-CODE SM30 give the same table name and click on maintanance push button and maintain ur entries the table.
IF helpfull reward points
Anees
9886358645

Multiple file creation

Hi.
I have to create multiple files for mulitiple plants entered through select-options.
I have done this for single file but not getting the idea how to do it for multiple files.
My work:
*File creation
 CONCATENATE
 c_path "file path
 c_qm " 'QM'
 c_underscore "underscore
 c_results " 'RESULTS'
 c_underscore
 s_werks "plant
 c_underscore
 sy-datum+4(2) "system date
 sy-datum+6(2)
 sy-datum+0(4)
 c_underscore
 sy-uzeit+0(2) "system time
 sy-uzeit+2(2)
 c_ext "file extension
 INTO g_file_name.
ENDLOOP.
Open File on the application server for processing
OPEN DATASET g_file_name FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc NE 0.
*Display error message
 MESSAGE i055. " Error in opening file
 LEAVE LIST-PROCESSING.
ELSE.
 LOOP AT i_final INTO wa_final.
 TRANSFER wa_final TO g_file_name.
 ENDLOOP.
ENDIF.
CLOSE DATASET g_file_name.
Then i am updating the database table using i_update
Work Area for Z_DATADOWNLOAD table
DATA: l_wa_update TYPE ztable
l_wa_update-prog_name = g_repid.
l_wa_update-plant = s_werks.
l_wa_update-last_run_dt = g_sysdate.
l_wa_update-last_run_tm = g_systime.
MODIFY ztable FROM l_wa_update.
Pls let me know how to manage this for multiple files.

Hi Simran.
Consider this code.
REPORT zztest.
TABLES : t001w.
*Declare one Internal table for werks
DATA :BEGIN OF it_werks OCCURS 0,
 werks TYPE t001w-werks,
 END OF it_werks.
*Select options
SELECT-OPTIONS : s_werks FOR t001w-werks.
START-OF-SELECTION.
*GEt all the plants entered in selection screen from
*DB table T001W (Plants/Branches)
SELECT werks FROM t001w INTO TABLE it_werks WHERE werks IN s_werks.
*Loop that internal table
 LOOP AT it_werks.
 CONCATENATE
 c_path "file path
 c_qm " 'QM'
 c_underscore "underscore
 c_results " 'RESULTS'
 c_underscore
 it_werks-werks "Plant
 c_underscore
 sy-datum+4(2) "system date
 sy-datum+6(2)
 sy-datum+0(4)
 c_underscore
 sy-uzeit+0(2) "system time
 sy-uzeit+2(2)
 c_ext "file extension
 INTO g_file_name.
*Now you have the file path for the werks
*Open File on the application server for processing
 OPEN DATASET g_file_name FOR OUTPUT IN TEXT MODE
 ENCODING DEFAULT.
 IF sy-subrc NE 0.
*Display error message
 MESSAGE i055. " Error in opening file
 LEAVE LIST-PROCESSING.
 ELSE.
 LOOP AT i_final INTO wa_final.
 TRANSFER wa_final TO g_file_name.
 ENDLOOP.
 ENDIF.
 CLOSE DATASET g_file_name.
* Then i am updating the database table using i_update
* Work Area for Z_DATADOWNLOAD table
 DATA: l_wa_update TYPE ztable
 l_wa_update-prog_name = g_repid.
 l_wa_update-plant = s_werks.
 l_wa_update-last_run_dt = g_sysdate.
 l_wa_update-last_run_tm = g_systime.
 MODIFY ztable FROM l_wa_update.
*Pls let me know how to manage this for multiple files.
 ENDLOOP.
Regards,
Arun Sambargi.

Update ZTable from editable ALV

Hi All,
i'm calling a Function Module from within a Badi Class ( Workorder_Update) which uses an ALV to Add Comments in a Field of the ALV for Transportation to a ZTable. Therefore the ALV is set to editable.
The Problem is that if the User does not press 'enter' after she/he added the Comment, the value is not send back to the internal Table wich updates the ZTab. If the User presses 'enter' ONLY the Comment is transported but the remainder of the Fields are cleared.
This is part of the Coding:
Before Calling FM -->
+ IF wa_header_old-pronr NE wa_header-pronr.
        CLEAR wa_zthlog.
        wa_zthlog-uzeit     = sy-uzeit.
        wa_zthlog-aufnr     = wa_header-aufnr.
        wa_zthlog-objnr     = wa_header-objnr.
        wa_zthlog-vornr     = wa_operation-vornr.
        wa_zthlog-ktext     = wa_header-ktext.
        wa_zthlog-aenam     = sy-uname.
        wa_zthlog-aedat     = sy-datum.
        wa_zthlog-larnt     = wa_operation-larnt.
        wa_zthlog-pronr     = wa_header-pronr.
        wa_zthlog-arbei     = wa_operation-arbei.
        wa_zthlog-dauno     = wa_operation-dauno.
        wa_zthlog-dauno     = wa_operation-dauno.
        wa_zthlog-ltxa1     = wa_operation-ltxa1.
        wa_zthlog-arbid     = wa_operation-arbid.
        wa_zthlog-fieldname = 'PRONR'.
        wa_zthlog-matkl     = wa_operation-matkl.
        wa_zthlog-preis     = wa_operation-preis.
        wa_zthlog-waers     = wa_header-waers.
        wa_zthlog-old_value = wa_header_old-pronr.
        wa_zthlog-new_value = wa_header-pronr.
Fill t_zthlog - Call FM
        APPEND wa_zthlog TO t_zthlog.
      ENDIF.
    ENDLOOP.
Secure Values before change
    MOVE t_zthlog TO y_zthlog.+
Calling FM -->
+function z_thlog.
t_zthlog[] = c_zthlog[].
call screen 0100 starting at 10 3.
c_zthlog[] = t_zthlog[].
endfunction.+
ALV Grid - Processing -->
+module output_0100 output.
Fill Fieldcatalog
call function 'LVC_FIELDCATALOG_MERGE'
    exporting
      i_structure_name       = 'ZTHLOG'
    changing
      ct_fieldcat            = gt_fieldcat[]
    exceptions
      inconsistent_interface = 1
      program_error          = 2
      others                 = 3.
if g_custom_container is initial.
Prepare ALV
    create object g_custom_container
         exporting container_name = g_container.
    create object grid1
         exporting i_parent = g_custom_container.
    g_repid = sy-repid.
    gs_layout-grid_title = 'Änderungsprotokoll'.
    gs_layout-zebra      = 'X'.
    gs_layout-cwidth_opt = 'X'.
    gs_variant-report    = g_repid.
    gs_variant           = '/default'.
gs_layout-edit = 'X'.
Call ALV
    call method grid1->set_table_for_first_display
      exporting
        i_structure_name = 'ZTHLOG'
        is_layout        = gs_layout
        i_save           = 'A'
        is_variant       = gs_variant
      changing
        it_outtab        = t_zthlog
        it_fieldcatalog = gt_fieldcat[].
Ready for Input
    call method grid1->set_ready_for_input
      exporting
        i_ready_for_input = 1.
Eventregistration
    call method grid1->register_edit_event
      exporting
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    create object g_event_receiver.
    set handler g_event_receiver->handle_data_changed for grid1.
else.
Refresh, if filled
    call method grid1->refresh_table_display.
endif.
set Cursor
call method cl_gui_control=>set_focus
    exporting
      control = grid1.
endmodule.                 " output_0100 OUTPUT+
There are alot of fields so the manual creation of the fieldcatalog should be avoided if possible.
Any Help is appreciated!
Best Regards
Stefan

Hi,
Check this
* Module Pai INPUT                                                     *
* PAI module                                                           *
module pai input.
save_ok = ok_code.
clear ok_code.
call method grid1->check_changed_data
    importing
      e_valid = v_valid.
" After this system will automatically update your changed data into
" internal table t_zthlog
case save_ok.
    when 'EXIT'.
      perform f_exit_program.
    when 'CANC'.
      perform f_exit_program.
    when 'BACK'.
      perform f_exit_program.
    when 'SAVE'.
      perform f_save_data.
endcase.
endmodule.                               " Pai INPUT
aRs

User Exit/BADI for AS01 ( Asset Creation )

Hi Xperts,
My requirement is during asset creation in AS01, after asset generated i want to send asset no, subno, asset creation date, int. order no to ztable.
Can anyone suggest user exit/BADI which suit this requirement.
I have gone through forum search, but not found suitable object.
Ram.

Hi Ram,
Check out below Badi and Enhancement
BADI
IHSA_LIST_EDITING
ENHANCEMRNT
EXIT_SAPLAAPM_002
EXIT_SAPLAIST_001
EXIT_SAPLAIST_002
EXIT_SAPLAIST_003
THANKS & REGARDS
G.Vendhan
Edited by: vendhan g on Jul 24, 2009 12:33 PM

Creation ztable

Similar Messages

Maybe you are looking for