Creative video master web cam 2 usb version XP drivers required

Does anyone have a copy of a driver that will work under windows XP for the videoblaster web cam 2 ?

DM, I am pretty sure it does support WMP 0 playlists; I think 2..02 did as well. I do know that 2.20.05 supports Yahoo! Music Engine playlists; I had two albums with the exact same title but by different artists (worse, one of them has a collaboration which makes it impossible to select the entire album in the Artists section of the library), and used YME playlists to properly separate them in my Micro.
Cat, congratulations on the official release of 2.20.05. I have a few questions for you:
Can you confirm that the officially-released 2.20.05 firmware is identical to what was released on Audible's website? (Other than Audible packaging theirs in a zip file, of course.)</LI>
I noticed that "locked charging" isn't listed in the release notes; that was also a ..0 feature which was NOT present in 2..02. I have confirmed thru testing that "locked charging" works on 2.20.05 with a third-party charger (unofficial use); presumably it also works with USB connections on PCs without MTP (official use, but I can't test it). The one report I read of problems with "locked charging" on 2.20.05 was due to the user NOT locking his Micro BEFORE plugging in. Can you obtain official confirmation that "locked charging" is a 2.20.05 feature, and then add the blurb about it from the ..0 release notes to the 2.20.05 release notes?</LI>
And can I add to the firmware wishlist changes to the Albums section of the library, so that two albums by different artists with the exact same title are NOT mixed up? (That might need tagging software that can properly distinguish album artists from those on individual tracks, like WMP 0 does.)</LI>
Message Edited by RBBrittain on 09-27-2005 0:3 PM

Similar Messages

Qosmio X770: Not able to create 3D pictures/videos using Web Camera 3D V1

I am unable to record 3D images or video with the integrated Toshiba Web Camera 3D V1 on my X770 11C 3D laptop !
The 2D recording is normal.
Have I to install additional softwares for 3D recording?
Message was edited by: jacques.vsk

Dear MASTERG
I didn't find the program or application to test the webcam .
I found only the following text about the TOSHIBA Web Camera 3D V1( in the categories X775 3D series) :
"The webcam also supports 3D playback through Nvidia's 3D Vision software. To start 3D webcam playback, enable 3D Vision, open the webcam app, and click the 3D playback option. Each time you start the app you'll be given the option of calibrating the image to change the 3D depth perception. Once calibrated, the webcam provided excellent 3D images"
On my laptop in the NVIDIA Corporation progams I do not see any webcam app!
I tested the camera in 2D with the Corel Digital Studio for Toshiba (not 3D).
Perhaps I am overlooking or missing something .
What program I need?
Regards Jacques.vsk

Change the video resolution when capturing a WEB-cameras

Language: Java
It is used in addition: JMF
When capturing video from WEB-cameras with JMF - getting the video is at the lowest resolution.
Can you please tell how to change the video resolution?
The code by which the captured image (no SWING-forms):
MediaLocator getWebCam = new MediaLocator("vfw://0");
private Player player;
Timer timer = new Timer(40, this);
public BufferedImage grabFrameImage() {
Image image = null;
FrameGrabbingControl frameGrabbingControl = null;
if (player != null)
frameGrabbingControl = (FrameGrabbingControl) player.getControl("javax.media.control.FrameGrabbingControl");
Buffer buffer = frameGrabbingControl.grabFrame();
if (buffer != null)
image = new BufferToImage((VideoFormat) buffer.getFormat()).createImage(buffer);
if (image != null)
return (BufferedImage) image;
return null;
public WorkWithWebCam() throws NoDataSourceException, IOException, NoPlayerException {
initComponents();
player = Manager.createPlayer(Manager.createDataSource(getWebCam));
player.start();
private void jButton1ActionPerformed(ActionEvent e) {
timer.start();
public static void main(String args[]) {
EventQueue.invokeLater(new Runnable() {
public void run() {
try{
new WorkWithWebCam().setVisible(true);
}catch(Exception ex){}
public void actionPerformed(ActionEvent e) {
panelMain.getGraphics().drawImage(this.grabFrameImage(), 0, 0, 400, 300, null);
P.S. Can you please tell how this forum can be identified code \ listing?

Hello,
I don't know if there is a way to change the video. But I think you can easily use your own videos by using a local .mpg or .3gp file via InputStream. Just change the player's parameters in video/mpg instead of capture://video.
Hope it helps...
Torsten

Capture a photo or video through my web cam

Greeting for the day to every one !!
I am trying to provide a facility in my project that any one capture his photo or video through web cam in their own computer. Is it possible in oracle /d2k ?? if yes please help me regarding this. How can i invoke my web cam through oracle/d2k and capture the photo.
Any one help me ..
Avinash Pandey

You will have to free some space up on your iPhone. Buying more iCloud storage will not increase the capacity of your iPhone. For the most part iCloud storage is for your iOS backups, documents such as iWork files and iCloud email. Aside from iTunes Match and PhotoStreams which do not count towards iCloud storage you can not store media files on iCloud. PhotoStream is not a photo backup service nor does it support video yet, it's intended use is for sharing and transferring photos to other devices.
Not sure of your setup but chances are you have a lot of video and photos on your iPhone taking up your storage space. These should be copied over to a computer where they can be properly backed up and organize. Once organized you can transfer them back to the iPhone through iTunes. You can sync a smaller number to free space. Or since you have a copy on the computer it is now possible to delete the photos from your iPhone when have the need to make a new video. Settings/General/Usage/Photos & Camera then swipe sideways to reveal the delete button is a quick way to delete photos in the library when you need more space. Ensure you still have a backup on a PC and an external drive.

I need in web cam that would be work in Linux.

Please write list of web cam that have linux drivers.

I asked my reb at CDW who sent an e-mail to Creative labs sales and was told the the Live Cam Optia Pro had drivers available for linux
This camera supports UVC (USB Video Class) whick is supported with in Linux see http//linux-uvc.berlios.de.
The driver is included on the Suse Enterprise desktop 0-2 distr, but so far I have not been able to get the camera to work correctly.
I am still working on the problem.

Web cam applet

Hi everybody ,
i have started to write in java , recently and now i want to make one applet.
My applet will show and record video from web cam and also it will play the recorded video. Please give me some advices and tutorials ?

I have been trying to do this as well. You have to use JMF.
The problem I have is that I can no longer get the camera to work in an applet.
I have posted in the JMF forum and have not recieved an answer.
I created an application that worked a couple years ago, but after upgrading to the latest JMF and JDK and camera drivers, I can no longer get the camera to work in the browser.
It works fine in the Appplet Viewer, but not a browser.
I am using IE6 and JBuilder 2005 with a Logitech USB camera.
It is not a jar signing issue - I get asked if I want to accept the certificate.
I am not sure if it is an IE6 issue or something in the JMF, JDK, or camera driver updates.
I also had web based cameras (Axis and Dlink) working, but have not had the luxury of time to test and see if these work with the latest JMF and JDK updates.

G3 BW/350 and web camera compatibility

Hi, it is for G3 BW/350. Have a web cam Genius w mac drivers installed and WebCam Monitor software. The system recognized it, but not the software, iChat, Yahoo Messenger. I know iChat wants 600mgz minimum processor. Am i able to use a web camera with this computer, how can i do it in this case? Thank You, appreciate any help!

You solve the problem by posted link. Thank You!
Video enabled after install. of IOXWebcamX-1.1, VideoCAM Eye, macam.app. It works now w iChat too. It not work with Video Viewer.app. There are no real colors in fact, its like three color mode. The Genius VideoCAM Trek was recognited as Sonix 0x6007.

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

-->Click HERE<-- Does item "B" (Turn video on/off) in the last topic on the page help?
You control the camera for Skype from within Skype, so Skype must be running to running to make video work.
Message was edited by: EZ Jim
Mac OSX 10.7.4

Is it possible to connect 2 Creative Web Cameras to one computer?

Hi all.
I want to connect 2 Web cameras to one computer and see li've video in two windows simultaneously. I have bought 2 identical LabTec Web Cameras, and when I connect to both cameras simultaneously the both video streams freezes.
Does anybody have any experience connecting 2 identical Creative Web cameras to one computer? Can they stream simultaneously without freezing?
I am planning to buy 2 Creative WebCam NX Pro, can they stream simultaneously without freezing?
Im using Windows XP SP2 and USB 2.0.
Regards,
Hemmingsen

Thank you for your reply!
I have tried to connect to different Web cameras to the same PC - and that worked!
I have tried to connect to identical LabTec Web cameras to the same PC - and that did NOT work!
It looks like it could be a driver problem.
I am working on a litte robot project and in connection to that, I need two identical cameras simultaneously to take 2 pictures. I that way I can analyse the 2 pictures and calculate the distance to objects. But the two pictures MUST be as identical as possible - therefore I want to use 2 identical cameras.
I would like if anybody who has 2 identical Creative Web cameras could do this little test:
1) Connect 2 identical Creative Web cameras to 2 different USB controllers (WebCam NX Pro preferred)
2) Open "My computer"/"WebCam "
3) Open "My computer"/"WebCam 2"
4) Check that both windows shows li've video simultaneously
5) Reply the result and the camera model to me
I get bankrupt if I buy more cameras that I cannot use - so I hope anybody can help me.
Regards,
Hemmingsen
Message Edited by hemmingsen on 09-27-2005 05:31 PM

How do I use a usb web cam with MacBook Pro

How do I use a web camera with a MacBook Pro? I want to run it through my laptop so I can project it on a screen for teaching a class.

b. todd wrote:
Can I record directly into iMovie with a usb web cam instead of iSight?
You can try it, but probably not.
This Apple article http://support.apple.com/kb/PH2134 explains that a Firewire-connected, tape-based camera or camcorder mode will work.
If you don't have access to one that works, a simple workaround is to record your video with QuickTimeX Player (the v.10.x one from Lion). You can import that recorded video into iMovie for editing.
If your Mac OS is earlier than Lion whose QuickTime does not offer movie recording as installed, use QuickTime7 Pro for recording.
Message was edited by: EZ Jim
Mac OSX 10.7.3

Web camera video quality in Flex

Hi, I have a flex app which turns on a web camera and shows
the video from the camera. The problem is that the video resolution
is a bit choppy or pixilated. I know it’s not because of the
quality of the webcam since the video is very clear on other
players. Anyone have an idea how to make the resolution clearer?
Here is a test app you can try yourself.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="initApplication()" fontFamily="Arial" width="925"
height="1100" layout="horizontal"
verticalAlign="middle">
<mx:Canvas id="videoContainer" width="330" height="250"
borderStyle="solid" borderColor="#000000" cornerRadius="10"
borderThickness="5" x="-167" y="42">
</mx:Canvas>
<mx:Script>
<![CDATA[
import mx.core.UIComponent;
public var camera : Camera ;
public var video : Video;
public var currentShot : BitmapData = new
BitmapData(320,240); // video.width,video.height);
public var matrix : Matrix = new Matrix();
public var mybitmapdata : BitmapData = new
BitmapData(320,240); // (video.width,video.height);
public var mybitmap : Bitmap ;
public var uploadbmd:BitmapData ;
public var flag:Boolean = true;
public var loader: URLLoader = new URLLoader();
public function initApplication()
camera = Camera.getCamera();
video = new Video(camera.width*2, camera.height*2);
video.attachCamera(camera);
mybitmap = new Bitmap(mybitmapdata);
var ref : UIComponent = new UIComponent();
setInterval(snapShot, 100);
public function snapShot() : void
currentShot.draw(video, matrix);
mybitmapdata = currentShot.clone();
mybitmap = new Bitmap(mybitmapdata);
var ref : UIComponent = new UIComponent();
ref.addChild( mybitmap );
videoContainer.addChild( ref );
]]>
</mx:Script>
</mx:Application>

Hi John
Sorry i don't have the answer, but i'm interested in your question because i have the same kind of issue when i import in iMovie 08, 09 and iMovie HD from my Sony SR10 AVCDH camera.
I just can say that when i export directly from iMovie to iDVD the quality is bad; this seems to be a well known problem and it is recommended to export video using the Quicktime with H264. With that method, i can obtain good quality in the STATIC images, but during the panoramic movements of the camera the final result (i mean a DVD on my cathodic TV) is disappointing, with a "jerky" rendering.
You can download on my iDisk an exemple of it at: http://public.me.com/leclercqpascal
When i compare with the same sequence treated on the PC Sony's software, i find in the latter case a perfectly smooth result.
The problem is the same when i import from the camera to FCE.
Help welcome, because i would be disappointed to resort to a PC software!

I am having trouble with a video program not connecting to my web cam. My computer is a 64 bit

I am using My Video Talk suite to make videos. I have used it before with this computer and it worked fine. My computer is a 64 bit. I recently downloaded the newest version of Firefox and now my video suite does not recognize my web cam and I cannot produce any videos. My Video Talk works in 32 bit I believe.
Do you have any answers to my problem?

Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff.

After update to 11.2.202.228 mz USB 1.1 web cam stop working

Hi,
I have a camera from MediaTech company, it is written on it MT400 and serial number 2604050599. Before latest update it works, after install newest version of Flash Player it stop working. I tested it on http://testmycam.com as one of Adobe employee advices on forum but I have only black rectangle. On top left corner of this rectangle it is written Camera: USB PC Camera (SN9C 102) , FPS 10. I disabled Hardware acceleration but problem remains.
As I remember this camera is USB 1.1. Does new Flash Version support USB 1.1?
I have checked on Device Manager on my Windows XP Home Edition 2002 Version with SP3 device driver version it is written:
Manufacturer : Sonix
Driver date: 2004-04-02 (I can't find newer drivers on web )
Driver version: 4.6.6.1
Is it bug or Flash Player stops supporting such devices?
Regards

I pressed Allow, before pressing Allow background was grey, after Allow
it gets black. I see the name of this camera on list. I also try another
camera from Logitech (I can't remember what name was it, but one of the
newest) and everything works which suggest it is strictly related with
this specific camera which I'm using.
Regards
W dniu 2012-03-31 08:39, Nodster pisze:
>
Re: After update to 11.2.202.228 mz USB 1.1 web cam stop working
created by Nodster <http://forums.adobe.com/people/Nodster> in /Using
Flash Player/ - View the full discussion
<http://forums.adobe.com/message/4304094#4304094

What web cams are compatiable with an imac on the latest software version?

Hi There
Does anyone know of a cheaper web cam than the isight? There are many different makes but i cannot find any that are compatiable with latest version of operating system.
Thanks for your help
Simon

Hi Simon,
There is this Apple Doc http://www.apple.com/downloads/macosx/drivers/firewirewebcamdriver.html
It lists this page http://www.ioxperts.com/devices/webcam.html
If you are going for a USB cam you will need http://www.ecamm.com/mac/ichatusbcam/
It has a Camera list page http://www.ecamm.com/mac/ichatusbcam/configs.html that links to drivers if the one that comes with the camera does not work.
Logitechs seem popular.
10:01 PM Sunday; May 14, 2006

Creative WEB Camera Laptop Ultra conflict with Adobe lements

After the WEB camera was installed, each time it connects to the computer, the Adope Photo downloader strtas and locks up waiting to download pictures from the web camera. Enybody seen this problem ? Any suggestions ?

Rob Day wrote:
Have you tried reinstalling InDesign? It sounds like something's wrong with your color profiles.
That's the only thing I haven´t tried, but I will and post about it.
I found a workaround though: If I set my desired color settings in InDesign, but don´t save them, then it works; I no longer get the error message if I go to Edit> Color Settings...
The color settings dialog box says that my Creative Cloud applications are unsynchronized, because I´m not using the .csf file previously synchronized using Bridge, but the settings are exactly the same and I can get around it. Colors actually work as they should.
So this seems to be a problem with InDesign accessing any saved color settings file. My color profiles aren´t wrong, because all other programs in the Suite use them with no trouble.
InDesign just wants to have it's own, non saved, color settings. How about that? Guess I got the selfish version .

Creative video master web cam 2 usb version XP drivers required

Similar Messages

Maybe you are looking for