Credentials of the configured SERVICE USER not correct

Hi Gurus
Is there any way to know the login credentials for a service user(configured in SU01 TCODE).
Actually,I am gettinf 401 authentication error when I try to post my message through a web service in PROD env.
In QA and DEV ,its running fine with same credentials of the SERVICE USERconfigured (in ID).
My scenario is a synchronous SOAP to Proxy.
Regards,
Sriparna

Hi Sriparna,
Do u have same roles In Production whatever u have in DEV and QA.
1)First u have to compare the userID Roles.
2)Check the u r ID have this role SAP_XI_IR_SERV_USER,SAP_XI_DEVELOPER_ABAP,SAP_XI_DEVELOPER_J2EE,SAP_XI_IS_SERV_USER,SAP_XI_RWB_SERV_USER,SAP_XI_MONITOR_ABAP,SAP_XI_MONITOR_J2EE,SAP_XI_MESSAGE_MODIFY.
Thanks
Ravi

Similar Messages

Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

Hello Everyone,
I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS 2011 Standard.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
the provided link says "There is no additional information about this issue" i am helpless
please tell assist.
Thanks.
Abdallah.M.M

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
Thanks

Nicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
    <Product ID="ProPlusVolume">
      <Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
    </Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks

The Autodiscover service could not be located

I am developing small EWS client. For initial testing I wrote simple code:
service = new ExchangeService(ExchangeVersion.Exchange2007_SP1);
service.Credentials = new WebCredentials("[email protected]", "password");
service.TraceEnabled = true;
ServicePointManager.ServerCertificateValidationCallback = CertificateValidationCallBack;
service.AutodiscoverUrl("[email protected]");
I included CertificateValidationCallBack method from
this MSDN page.
I have two Exchange servers. For one exchange server this code worked fine for sending a new email.
However on another server I got following exception:
The Autodiscover service could not be located
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetLegacyUserSettings[TSettings](String emailAddress, List`1 redirectionEmailAddresses, Int32& currentHop)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetLegacyUserSettings[TSettings](String emailAddress)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetLegacyUserSettings(String emailAddress, List`1 requestedSettings)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetUserSettings(String userSmtpAddress, UserSettingName[] userSettingNames)
at Microsoft.Exchange.WebServices.Data.ExchangeService.GetAutodiscoverUrl(String emailAddress, ExchangeVersion requestedServerVersion, AutodiscoverRedirectionUrlValidationCallback validateRedirectionUrlCallback)
at Microsoft.Exchange.WebServices.Data.ExchangeService.AutodiscoverUrl(String emailAddress, AutodiscoverRedirectionUrlValidationCallback validateRedirectionUrlCallback)
at Microsoft.Exchange.WebServices.Data.ExchangeService.AutodiscoverUrl(String emailAddress)
at EwsDctmSyncer.Test.Main(String[] args) in C:\ewswork\csws\EwsTest\EwsExp\Test.cs:line 21
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
When I look at the traces on console, I found this main problem:
failed: WebException (The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.)
However I dont understand what could be wrong with this second instance of Exchange Server. Can anyone pin point what could be wrong. I am puzzled since to my knowledge both the instances are similarly configured.
Added full trace as a reply to this post.

Full Exchange Service Trace:
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Starting SCP lookup for domainName='domain1.com', root path=''
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Searching for SCP entries in LDAP://CN=Configuration,DC=domain1,DC=com
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Scanning for SCP pointers Domain=domain1.com
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
No SCP pointers found for 'Domain=domain1.com' in
configPath='CN=Configuration,D
C=domain1,DC=com'
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Scanning for SCP urls for the current computer Site=Default-First-Site-Name
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Adding (prio 1)
'https://exchangeserver.domain1.com/Autodiscover/Autodiscover.xm
l' for the 'Site=Default-First-Site-Name' from
'LDAP://CN=exchangeserver,CN=Auto
discover,CN=Protocols,CN=exchangeserver,CN=Servers,CN=Exchange
Administrative Group (adminGroup),CN=Administrative Groups,CN=domain1,CN=Microsoft
Exchange,
CN=Services,CN=Configuration,DC=domain1,DC=com' to the top of the list (exact ma
tch)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Trying to call Autodiscover for [email protected] on
https://exchangeserver.domain1.com/Autodiscover/Autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:33Z">
POST /Autodiscover/Autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverRequest" Tid="9" Time="2013-12-16 15:40:33Z" Version="15.00.0516.014">
<Autodiscover
xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006">
<Request>
<EMailAddress>[email protected]</EMailAddress>
<AcceptableResponseSchema>http://schemas.microsoft.com/exchange/autodiscov
er/outlook/responseschema/2006a</AcceptableResponseSchema>
</Request>
</Autodiscover>
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:46Z">
failed: WebException (The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:46Z">
Trying to call Autodiscover for [email protected] on
https://domain1.com/aut
odiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:46Z">
POST /autodiscover/autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
failed: WebException (Unable to connect to the remote server)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to call Autodiscover for [email protected] on
https://autodiscover.domain1.com/autodiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:47Z">
POST /autodiscover/autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
failed: WebException (The remote name could not be resolved:
'autodiscover.domain1.com')
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to get Autodiscover redirection URL from
http://autodiscover.domain1.com/
autodiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Request error: The remote name could not be resolved:
'autodiscover.domain1.com'
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No Autodiscover redirection URL was returned.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to get Autodiscover host from DNS SRV record for domain1.com.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
DnsQuery returned error error 'DNS name does not exist' error code 0x0000232B.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No appropriate SRV record was found.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No matching Autodiscover DNS SRV records were found.
</Trace>

ORA-20029: The runtime service is not currently available

I have a very similar problem as reportet earlier messages,
and I tried the suggested actions, but without success.
are ther some more idears to solve the problem ?
OWB Version 9.2.0.2
Platform : RT-Server SUN Solaris ; Oracle-DB 9.2 , OWF 2.6.2
     Client WinXP
i think all is propperly installed, because
last week there were no problems
all worked DEPLOY and EXECUTE of MAPINGS and WORKFLOWS
possibly the database was restarted during the weekend.
now on executing (or deploying) a OWB-MAPPING i got:
RTC-5006: An error occured duriing execution ....
ORA-20029: The runtime service is not currently available
     ... and some more Errors in stack
ORA-25207: Enqueue failed, queue OWBRTR_TDWHH9.WB_RT_SERVICE_QUEUE is disabled from enqueueing
     ... and some more Errors in stack
... I tried
=========
Run SerciceDoctor:
OWB> @c:/programme/owb92/owb/rtp/sql/service_doctor
All PL/SQL packages and functions are valid
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availablePL/SQL procedure successfully completed.
looking for JOBS
JOB LOG_U PRIV_ SCHEM LAST_DATE LAST_SEC THIS_DATE THIS_SEC NEXT_DATE
NEXT_SEC TOTAL_TIME B INTERVAL fail
WHAT NLS_ENV
6 OWBRT OWBRT OWBRT 25.11.2003 18:09:25 25.11.2003 18:15:25
4 N sysdate + (6/1440) 0
wb_rti_service_job.check_service(1); NLS_LANGUAGE='AMERIC
OWB> exec dbms_job.run(6);
PL/SQL procedure successfully completed.
OWB> @c:/programme/owb92/owb/rtp/sql/service_doctor
All PL/SQL packages and functions are valid
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availablePL/SQL procedure successfully completed.
OWB> @c:/programme/owb92/owb/rtp/sql/stop_service
Not Available
PL/SQL procedure successfully completed.
OWB> @c:/programme/owb92/owb/rtp/sql/start_service
Not Available
PL/SQL procedure successfully completed.
JOB LOG_U PRIV_ SCHEM LAST_DATE LAST_SEC THIS_DATE THIS_SEC NEXT_DATE
NEXT_SEC TOTAL_TIME B INTERVAL fail
WHAT NLS_ENV
8 OWBRT OWBRT OWBRT 25.11.2003 18:29:11
0 N sysdate + (6/1440)
wb_rti_service_job.check_service(1); NLS_LANGUAGE='AMERIC
1 row selected.
OWB> exec dbms_job.run(8);
PL/SQL procedure successfully completed.
OWB> commit;
Commit complete.
OWB> @c:/programme/owb92/owb/rtp/sql/service_doctor
All PL/SQL packages and functions are valid
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availablePL/SQL procedure successfully completed.
OWB> show parameter job
NAME TYPE VALUE
job_queue_processes integer 10
ls -lrt /oraapp9/OWB92/owb/log
....some older files ...
-rw-r--r-- 1 ora9r2 oinstall 48164 Nov 20 23:01 owbrtr_tdwh9.log.8
-rw-r--r-- 1 ora9r2 oinstall 8542 Nov 21 23:02 owbrtr_tdwh9.log.9
-rw-r--r-- 1 ora9r2 oinstall 5165 Nov 24 23:01 owbrtr_tdwh9.log.10
-rw-r--r-- 1 ora9r2 oinstall 4396 Nov 25 17:09 owbrtr_tdwh9.log.11
cat /oraapp9/OWB92/owb/log/owbrtr_tdwh9.log.11
===============================================
23:43:03 [329F3D] Runtime Platform Service Version 9.2.0.2.8 starting
23:43:03 [329F3D] Platform Repository Name owbrtr_tdwh9 on Service TDWH9 at Host localhost
23:43:04 [329F3D] Recovery starting
23:43:04 [329F3D] Recovering execution with audit ID 923
23:43:04 [329F3D] AuditId=923: Processing execute request
23:43:04 [329F3D] Recovering execution with audit ID 1333
23:43:04 [329F3D] AuditId=1333: Processing execute request
23:43:04 [329F3D] Service startup complete
23:43:07 [916A2] oracle.wh.runtime.platform.service.controller.RecoveryInProgress: RPE-01008: Recovery of this request is in progress.
     at oracle.wh.runtime.platform.service.controller.AdapterContextImpl.initialize(AdapterContextImpl.java:974)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:770)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:484)
23:43:08 [916A2] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
23:43:08 [916A2] oracle.wh.runtime.platform.adapter.rtp.AbortedDueToSystemFailure: RPE-01009: Completion of this task could not be c
ompleted due to an earlier system failure.
     at oracle.wh.runtime.platform.adapter.rtp.NativeExecutionAdapter.execute(NativeExecutionAdapter.java:22)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:63)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:484)
23:43:08 [329F3D] AuditId=923: Request completed
23:43:10 [580BE3] oracle.wh.runtime.platform.service.controller.RecoveryInProgress: RPE-01008: Recovery of this request is in progress.
     at oracle.wh.runtime.platform.service.controller.AdapterContextImpl.initialize(AdapterContextImpl.java:974)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:770)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:484)
23:43:10 [580BE3] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
23:43:10 [580BE3] oracle.wh.runtime.platform.adapter.rtp.AbortedDueToSystemFailure: RPE-01009: Completion of this task could not be
completed due to an earlier system failure.
     at oracle.wh.runtime.platform.adapter.rtp.NativeExecutionAdapter.execute(NativeExecutionAdapter.java:22)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:63)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:484)
23:43:10 [329F3D] AuditId=1333: Request completed
16:23:54 [329F3D] AuditId=1572: Processing execute request
16:23:54 [77A7F9] Thread terminating due to fatal exception of type oracle.wh.runtime.platform.adapter.InfrastructureException
16:33:47 [329F3D] AuditId=1572: Abort request being processed
16:34:19 [329F3D] AuditId=1580: Processing execute request
16:34:19 [3FEA1D] Thread terminating due to fatal exception of type oracle.wh.runtime.platform.adapter.InfrastructureException
16:35:25 [329F3D] AuditId=1580: Abort request being processed
16:36:05 [329F3D] AuditId=1588: Processing execute request
16:36:05 [C68C3] Thread terminating due to fatal exception of type oracle.wh.runtime.platform.adapter.InfrastructureException
16:56:07 [329F3D] AuditId=1588: Abort request being processed
17:09:31 [329F3D] Service closing down

I am having the same issue (not being able to connect to my runtime respository. I used to be able to connect just fine but then the database that contains the runtime repository was patched from version 9.2.0.1 to 9.2.0.4 and now I get the rtc-5301 runtime service is not available. I can connect to this database via sqlplus using the runtime user and runtime owner.
When I ran the start_service.sql I get available, but when I run service_doctor.sql I get:
All PL/SQL packages and functions are valid
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableSo I went to the wbruntime.log and it contained:
12:03:58 [F4FB3] Runtime Platform Service Version 9.2.0.2.8 starting
12:03:58 [F4FB3] Startup due to manual request
12:03:58 [F4FB3] Platform Repository Name wbruntime on Service whse at Host gsharrowxp
12:03:58 [F4FB3] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- No more data to read from socket
     at oracle.wh.runtime.platform.service.controller.PlatformDb.disconnect(PlatformDb.java:145)
     at oracle.wh.runtime.platform.service.Service.run(Service.java:333)
     at oracle.wh.runtime.platform.service.Service.main(Service.java:518)
java.sql.SQLException: No more data to read from socket
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1160)
     at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:963)
     at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:893)
     at oracle.jdbc.ttc7.Oclose.receive(Oclose.java:101)
     at oracle.jdbc.ttc7.TTC7Protocol.close(TTC7Protocol.java:684)
     at oracle.jdbc.driver.OracleStatement.close(OracleStatement.java:700)
     at oracle.jdbc.driver.OraclePreparedStatement.exitExplicitCacheToClose(OraclePreparedStatement.java:377)
     at oracle.jdbc.driver.LRUStatementCache.close(LRUStatementCache.java:863)
     at oracle.jdbc.driver.OracleConnection.close_statements(OracleConnection.java:2340)
     at oracle.jdbc.driver.OracleConnection.close(OracleConnection.java:1448)
     at oracle.wh.runtime.platform.common.DatabaseConnectionFactory.close(DatabaseConnectionFactory.java:19)
     at oracle.wh.runtime.platform.service.controller.PlatformDb.disconnect(PlatformDb.java:140)
     at oracle.wh.runtime.platform.service.Service.run(Service.java:333)
     at oracle.wh.runtime.platform.service.Service.main(Service.java:518)
I am sure this has something to do with the patch, but how do I fix it?
OWB client 9.2.0.2.8
owb repository 9.2.0.2.0

The Audio Service is not running when I open certain programs

My audio works fine when I boot my computer. However, any time I got to click on the speaker icon at the bottom right the audio service stops running. When I use the system.msc fix that is very common on the web by the time I open the panel the
audio has already realized that it is running and starts running again. If I open razer comms, it stop working again and I either can open system.msc to fix it, or I can just click the speaker icon to fix it. When I open a game, like FFXIV it stop
working again, click the speaker and all the sudden it turns back on.
I have read every thread I can find on the web about the "Audio is not running" issue but no one seems to have had this exact problem and I don't know how to fix it.
For the love of god help

Hi,
By saying the audio service us not working, do you mean the speaker icon show an red "X" ?
Please take a check with the following KB article:
In Windows 7 a red 'X' may appear over the speaker icon in the notification area even though audio output functions correctly
If this is the issue, then this behavior is cosmetic in nature and does not affect the performance of Windows.
Best regards
Michael Shao
TechNet Community Support

"The TestStand service did not start up promptly"

I have a LabView Operator Interface startup problem with TS 4.1. If
the OI is started immediately after system boot the operator may get apopup error from TestStand:
"The TestStand service did not start up promptly"
The
TestStand Service has a dependency on RPC so if either does not startup
before the operator launches the OI, he gets the message. If he
dismisses the message there is no further error i.e. the software
continues to work OK.
The real problem is the end user does not like this message and wants it removed.
Any suggestions how I can get rid of this message?
Only ideas I can see at the moment - either to have some kind of
delay timer on startup (this would need to be around 1-2 mins after
boot
on the system in question to stop it happening) or perhaps some LabView
code to poll the status of the TestStand service somehow so that we
wait for service to start before the OI communicates with testStand -
and thus the
popup does not occur.

The service should not normally take any significant amount of time to startup. There are some issues with service startup that we have noticed in some cases, but I don't remember the details. I will try and find out and get back to you. In the meantime, or as a possible solution, you can use the Windows SDK to check the status of the service and to wait until it is running. I'm not sure if the following can be directly translated into LabVIEW dll calls, but it would definitely be possible to create a C/C++ dll with the following code in it and call it from LabVIEW (If you do not have access to a C/C++ compiler and/or would like me to, I can probably build a dll with this code in it for you):
int MakeSureServiceIsRunning(void)
    SERVICE_STATUS serviceStatus;
    SC_HANDLE hService = NULL;
    SC_HANDLE hSCM = NULL;
    // Put variable into a good initial state for return value.
    serviceStatus.dwCurrentState = SERVICE_START_PENDING;
    hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
    if (hSCM == NULL)
        goto Error;
    hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
    if (hService == NULL)
        goto Error;
    do
        if(!QueryServiceStatus(hService, &serviceStatus))
            goto Error;
        if(serviceStatus.dwCurrentState != SERVICE_RUNNING)
            Sleep(100); // don't just do busy waiting, give up cpu time to other threads.
    while(serviceStatus.dwCurrentState == SERVICE_START_PENDING);
Error:
    if (hService != NULL)
        CloseServiceHandle(hService);
    if (hSCM != NULL)
        CloseServiceHandle(hSCM);
    if (serviceStatus.dwCurrentState == SERVICE_RUNNING)
        return 1;
    else
        return 0; // An error occurred, or service is in an unexpected state.
Or alternatively, if you want to do the polling inside of LabVIEW you could just do the following in the C/C++ dll:
int GetTestStandServiceStatus(unsigned int *serviceStatusReturnResult)
    SERVICE_STATUS serviceStatus;
    SC_HANDLE hService = NULL;
    SC_HANDLE hSCM = NULL;
    hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
    if (hSCM == NULL)
        goto Error;
    hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
    if (hService == NULL)
        goto Error;
    if(!QueryServiceStatus(hService, &serviceStatus))
        goto Error;
    *serviceStatusReturnResult = serviceStatus.dwCurrentState;
    CloseServiceHandle(hService);
    CloseServiceHandle(hSCM);
    return 1; // success
Error:
    if (hService != NULL)
        CloseServiceHandle(hService);
    if (hSCM != NULL)
        CloseServiceHandle(hSCM);
    return 0; // An error occurred. Perhaps TestStand service isn't registered.

PowerPivot - SP2013 - Cannot create the service instance because the parent Service does not exist

Unable to setup PowerPivot using PowerPivot configuration tool.
I have One server which has SQL 2012 SP1 and SP2013.
The farm is configured with all service applications.
SQL has default instance with DB Engine and SSAS Tabular. Reporting Services has been configured using SharePoint mode and has a service application.
The Power Pivot instance is set up with DB Engine and the SSAS.
I keep getting this error. Ive tried so many times uninstalling, making sure features removed, rebuilding the farm (thank god for autospinstaller..)
11/07/13 12:06:17:6858 Verbose: CreateSystemServiceInstance.NeedsExecute
11/07/13 12:06:17:6858 Verbose: Running function IsFarmConfigured to check whether SharePoint is configured regardless of availability
11/07/13 12:06:17:6858 Verbose: Farm is configured
11/07/13 12:06:17:6858 Verbose: Entering function GetService(Guid)
11/07/13 12:06:17:6868 Verbose: Service is not installed.
11/07/13 12:06:17:6868 Verbose: Service instance not found in local server.
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.NeedsExecute(True)
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute(True)
11/07/13 12:07:41:5662 Verbose: CreateSystemServiceInstance.Execute
11/07/13 12:07:41:5682 Verbose: Entering function GetService(Guid)
11/07/13 12:07:41:5702 Verbose: Service is not installed.
11/07/13 12:07:41:5702 Verbose: CreateSystemServiceInstance.Execute(Skipped)
11/07/13 12:07:41:5702 High: Cannot create the service instance because the parent Service does not exist.
11/07/13 12:07:41:5702 High: Prerequisites check for execution failed. Farm is not in a valid state.

Did you install the PowerPivot add-in for SharePoint? There are 2 parts to this - the SQL Server Power Pivot for SharePoint which is the Analysis Services instance running in Tabular Mode and the PowerPivot Add-in. The last line in your error message seems
to tell you that you have a missing component in the farm, possibly the PowerPivot Add-in
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

OSD fails during WinPE Install drivers - "The hash value is not correct"

Hello everyone,
We are facing a strange problem during OSD for one of the hardware models. We are on SCCM 2012 R2, and mainly build Windows 7
x86 machines on various Lenovo models.
I can see this problem I have encountered has been discussed elsewhere on this forum (especially SCCM 2007 threads) but not really sure what I have
observed is the issue being discussed. Here is the problem....<o:p></o:p>
We have a laptop (Lenovo x240) which has been building perfectly fine for as long as I can remember. However since last 2 days when I try to build
the same model, we get the above error during the driver installation stage (in WinPE).<o:p></o:p>
I referred to some of the other threads and MS blogs where they say file names with extended ASCII character may break the hash of the files (packages)
being downloaded during OSD resulting in the error(http://blogs.technet.com/b/smsandmom/archive/2008/10/09/configmgr-2007-smsts-error-hash-could-not-be-matched-for-the-downloaded-content.aspx).
The point is I have manually gone into the Command prompt (F8) during driver downloading stage (right after apply OS image) and checked that the drivers are getting downloaded fine (but there is not enough time for me to check individual sub folders for the
extended ascii character problem). When it comes to installing the drivers, the TS fails and immediately the whole of the driver packages folder under D:\_SmsTaskSequence\Packages\PackageID folder becomes empty.
There is nothing much logged in the ts log either.<o:p></o:p>
Any thoughts? The only thing that has changed in our environment in the last 2 weeks is that we have upgraded from SCCM
2012 SP1 to R2(CU3). All the other models have built ok since and only X240 is running into this issue.
Would recreating the driver pack be an option here? I also understand that we also can configure the TS to refer to the package media directly from
the DP share (instead of downloading) but we would rather not get into that at this stage as we have not tested the TS with that configuration (it might open another can of worms with package command lines etc.)
One more point - This "The hash value is not correct" error message is only logged on the SCCM status messaging system (which can be viewed
under the Monitoring wunderbar - Status Message Queries). I do not find it on the ts log file interestingly.
Any help is much appreciated.<o:p></o:p>

I've only seen this once before in a ConfigMgr 2012 RTM environment and after fighting it for a few days I ended up simply recreating the driver packages.
-Nick O.

Ie 11 fails with 'IE Security detected that the URL and the configuration link to not match

HI,
I Have a user that is using IE 11 and is getting the following error:
IE Security detected that the URL and the configuration link to not match. Please use the URL as configured. Is and IP based URL. On IE 10 we get a similar message, but as soon as we add it to our trusted site and switch to compatibility
mode the issue goes away.
For example http://10.10.10.180/xxx/iafwebsite_810/
What would be causing this issue?
Any help would be appreciated.
Thanks,
Trish
Trish Leppa

Hi,
It seems that this URL doesn't meet security level. Thus, as long as you add this URL to Trusted sites zone, this issue is fixed.
Thanks!
Andy Altmann
TechNet Community Support

Time in the message monitor is not correct

hi,
the time in the message monitor is not correct. ( -2 hours of the actual time)
So, how can I correct the time in the message monitoring??
Thanks for your help.
Regards
Stefan

Hi michal,
I have found only the user timezone and this zone is correct (Europe/Berlin).
So where can I find the system timezone?
Thanks.
Regards
Stefan

The search service is not able to connect to the machine that hosts the administration component

Hi
After uninstalling the binaries, and reinstalling / joining back to the farm, everything seems happy expect search.
When we try and start the Search Service back, it takes us to the Search Application section, and shows this message;
The search service is not able to connect to the machine that hosts the administration component
How can I get search to work again, or get around this error?
I am pretty inexperienced with Search

Hi Tibsy80,
For your issue, it can be caused by the search admin timer job was disabled.
Run below PS command to know the status:
Get-SPTimerJob job-application-server-admin-service | fl
If it returns “IsDisabled: True”, ran below PS command to enable the service:
Enable-SPTimerJob job-application-server-admin-service
Then run below PS command to stop and start the timer and IIS reset:
Net Stop timer
Net start timer
iisreset
Then wait 1-2 min and try browsing to the SSA again.
Reference:
http://neelb.wordpress.com/2012/01/19/the-search-service-is-not-able-to-connect-to-the-machine/
Also you can refer to the blogs:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b04498ec-78d1-4bb9-8077-0481977cef10/the-search-service-is-not-able-to-connect-to-the-machine-that-hosts-the-administration-component?forum=sharepointadminprevious
http://davidbajak.com/blog/post/2011/09/29/Fix-SharePoint-2010-Enterprise-Search-After-Using-AutoSPInstaller-Script-Installer.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Credentials of the configured SERVICE USER not correct

Similar Messages

Maybe you are looking for