OSD fails during WinPE Install drivers - "The hash value is not correct"
Hello everyone,
We are facing a strange problem during OSD for one of the hardware models. We are on SCCM 2012 R2, and mainly build Windows 7
x86 machines on various Lenovo models.
I can see this problem I have encountered has been discussed elsewhere on this forum (especially SCCM 2007 threads) but not really sure what I have
observed is the issue being discussed. Here is the problem....<o:p></o:p>
We have a laptop (Lenovo x240) which has been building perfectly fine for as long as I can remember. However since last 2 days when I try to build
the same model, we get the above error during the driver installation stage (in WinPE).<o:p></o:p>
I referred to some of the other threads and MS blogs where they say file names with extended ASCII character may break the hash of the files (packages)
being downloaded during OSD resulting in the error(http://blogs.technet.com/b/smsandmom/archive/2008/10/09/configmgr-2007-smsts-error-hash-could-not-be-matched-for-the-downloaded-content.aspx).
The point is I have manually gone into the Command prompt (F8) during driver downloading stage (right after apply OS image) and checked that the drivers are getting downloaded fine (but there is not enough time for me to check individual sub folders for the
extended ascii character problem). When it comes to installing the drivers, the TS fails and immediately the whole of the driver packages folder under D:\_SmsTaskSequence\Packages\PackageID folder becomes empty.
There is nothing much logged in the ts log either.<o:p></o:p>
Any thoughts? The only thing that has changed in our environment in the last 2 weeks is that we have upgraded from SCCM
2012 SP1 to R2(CU3). All the other models have built ok since and only X240 is running into this issue.
Would recreating the driver pack be an option here? I also understand that we also can configure the TS to refer to the package media directly from
the DP share (instead of downloading) but we would rather not get into that at this stage as we have not tested the TS with that configuration (it might open another can of worms with package command lines etc.)
One more point - This "The hash value is not correct" error message is only logged on the SCCM status messaging system (which can be viewed
under the Monitoring wunderbar - Status Message Queries). I do not find it on the ts log file interestingly.
Any help is much appreciated.<o:p></o:p>
I've only seen this once before in a ConfigMgr 2012 RTM environment and after fighting it for a few days I ended up simply recreating the driver packages.
-Nick O.
Similar Messages
-
MDSModelDeploy Operation Failed, clone cannot be deployed, The Attribute Value is not valid
I've created a model containing a customer entity with various domain based attributes. I've populated the entities via a combination of manual entry and the staging tables. In the source system I have approx 950 customer records, all of which
fail validation on the source system as some of the attributes will be maintained only in MDS and are not in the source systems I'm pulling the initial data from.
I ran the MDSModelDeploy.exe to create a package containing data on the source system. I then ran the package to apply the package using the -deployclone option on my target system. I piped the output into a flat file for review.
Here is the error I'm receiving.
MDSModelDeploy operation failed. Elapsed time: 00:01:00.2314612
Error:
A clone of the "Subzero_1" model cannot be deployed.
An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
Package deployment failed with 344 errors
The attribute value is not valid.
The attribute value is not valid. (repeated 344 times)
Any ideas what the issue might be? I have tried verbose logging as well and did not find anything that would point me in the direction of the problem. The end result was that the model was not deployed to the target.
I have also created a package without data, deployed that, then applied the data. This gets the model to the target and the data also appears to be there but I did receive this error on the deployupdate.
This is on SQL Server 2012.I am seeing the same error. Created a model, Cloned the model. Made changes to the clone (Schema and Data), and used MDSModelDeploy UpdateModel to update the primary (not cloned) model. In looking at the log, I see the error shown below, but I do not
see anything that points to what was happening at the time.
I tried running a SQL trace to see if one of the SQL commands received an error, but none of the commands did.
In looking at the model that was updated, I can see all of the schema changes were made, and most of the data was updated. There is one table that did not update completely. The attributes in the table consist of Domain Specific and text attributes only.
I also verified that everything on both models was validated before starting.
In the weblog I see the error listed below, but there is nothing in the data that would match that value
Not sure were to go from here....
Chad
--- MDSMODELDEPLOY ERROR RECEIVED ---
MDS Error: 0 : Microsoft.MasterDataServices.WebUI.ServiceAdapterObjectInvalidException: An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
at Microsoft.MasterDataServices.WebUI.ServiceAdapter.InspectResponseForErrors(MessageRequest request, MessageResponse response)
at Microsoft.MasterDataServices.WebUI.ServiceAdapter.ExecuteRequest[TRequestType,TResponseType](MdmServiceOperation`2 operation, TRequestType request)
at Microsoft.MasterDataServices.WebUI.ServiceAdapter.DoEntityMembersMerge(EntityMembers entityMembers)
at Microsoft.MasterDataServices.Deployment.ModelDeployer.BatchEntityMembersMerge(Collection`1 masterData, Boolean membersOnly, Int32 batchSize, Int32 totalBatches, Collection`1 errors)
at Microsoft.MasterDataServices.Deployment.ModelDeployer.UpdateData(Collection`1 masterData, Warnings errorsAsWarnings)
at Microsoft.MasterDataServices.Deployment.ModelDeployer.DeployUpdate(Package package, Boolean includeData, Identifier targetVersionId)
at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.DeployUpdate(String serviceName, String packageFile, String versionName)
at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.Main(String[] args)
DateTime=2014-02-06T16:03:17.8405277Z
-- WEB ERROR RECEIVED --
MDS Verbose: 0 : Unable to convert value of query string parameter Id = VID to an integer
DateTime=2014-02-06T17:18:00.7367274Z -
Release Strategy Triggered even if the characteric values were not correct.
Hi,
I have configured release strategy based on characteristics
Purchasing group and
Document type
It has 2 release indicators with 3 levels of release.
There are 2 release strategies assigned to same group 01 but have different release codes namely 01,02,03,04
Release Strategy A1has
Doc type NB and Purchasing group 120
Release Strategy A2 has
Doc type ZINT and Purchasing groups 130,131,132,134,135,136,137,138,139
However a strange thing happened.The release strategy was triggered for doc type NB and Purchasing group 190.
This purchasing group is not listed in either of the 2 strategies
Can any one explain why the release strategy got triggered?That means the old release strategy is not cleraed from the system
do one test
Go to CL30N tocde and enter you release class and class type 032
hit enter
now here enter the value of your char which is in the PO and hit Find in initial class from header
see which release strategy is pulled by the system
here you will see the release strategy and make sure that is not other than what you expect -
I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!
lan drivers*
-
EAP-TLS or PEAP authentication failed during SSL handshake to the ACS serve
We are running the LWAPP (2006 wlc's and 1242 AP's) and using the ACS 4.0 for authentication. Our users are
experiencing an issue, where they are successfully authenticated the first time, however as the number of them is increasing, they're starting to drop the connections and being prompted to re-authenticate. At this point, they are not being able to authenticate again.
We're using PEAP for the authentication and Win XP SP2 clients as the supplicants. The error message that we are seeing on the ACS for that controller is "EAP-TLS or PEAP authentication failed during SSL handshake to the ACS server"...Not sure if this error msg is relevant since we have other WLC's that are working OK and still generating the same error msg on the ACS...
Thanks..Here are some configs you can try:
config advanced eap identity-request-timeout 120
config advanced eap identity-request-retries 20
config advanced eap request-timeout 120
config advanced eap request-retries 20
save config -
my macbook pro was first installed with leopard and bootcamp 3.2 under windows 7. After update to lion it is no more possible to update bootcamp to 3.3. or 4.0. The report: The installation source ist not correct. What can i do?
auf Deutsch:
Auf meinem Macbook pro war Leopard und bootcamp 3.2 unter windows 7 installiert. Nach dem update auf lion kann bootcamp nicht mehr upgedatet werden. Weder auf 3.3. noch auf 4.0. Folgende Fehlermeldung kommt: Boot camp Dienste: Das installierte Produkt stimmt nicht mit der Installationsquelle überein. ... Was kann ich tun?It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber
Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang -
Hello Everyone,
I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS 2011 Standard.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
the provided link says "There is no additional information about this issue" i am helpless
please tell assist.
Thanks.
Abdallah.M.MHi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang -
I can not activate my iPhone iMassege on. Every time I try to run it in settings appears to me that the action failed. It worked in the past I do not know what happened.
Check out this new Apple document about iMessage problems -> iOS: Troubleshooting FaceTime and iMessage activation
-
Request number 0213232683. I've made the download of Acrobat Pro 11 on the page you gave me in your mail, installed the program with the serial number you gave me in your mail but it is not accepted. The message is "the serial number is not correct". What can i do? Can you send me a correct serial number?
Fabiana Pierifabianapieri, I have send you an E-mail, please respond to it providing the serial number that you are using & please provide your contact number too.
Regards
Rajshree -
DBMS_CRYPTO MD5 hash value does not match 3rd party MD5 free tool
Hello,
I am using Oracle Version: 11.2.4.
I have a problem where the MD5 value from DBMS_CRYPTO does not match the hash value from 3rd party MD5 free tool (MD5 Checksum Calculator 0.0.5.58 or WinMD5Free v1.20) and also the MD5 hash value calculated by an ingestion tool where I am transferring files to. The MD5 hash value that the ingestion tool calculates is the same as the 3rd party MD5 free tools I have. This occurs only on some of the XML files that I generate using XSQL(xmlserialize, xmlagg, xmlelement, etc.) and DBMS_XSLPROCESSOR on a Linux OS. The XML files are transferred from the Unix OS to my Windows 7 OS via filezilla.
I found a thread on this forum that also had a similar issue so I copy/paste the java functions. They are listed below(both are the same expect for the character set):
create or replace java source named "MD5_UTF_8" as
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.sql.Clob;
import java.sql.Blob;
public class MD5_UTF_8 {
private static final byte [] hexDigit = {
'0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'
/** Converts a byte array to a hex string
* Returns an empty string if the byte array is null
public static final String toHexString(byte [] bytes) {
if (bytes == null) return new String("");
StringBuffer buf = new StringBuffer(bytes.length * 2);
for (int i = 0; i < bytes.length; i++) {
buf.append((char) hexDigit[((bytes >>> 4) & 0x0F)]);
buf.append((char) hexDigit[(bytes & 0x0F)]);
return buf.toString();
// Convert Hex String to Byte Array
public static final byte[] byteArrayFromHexString(String str) {
byte[] bytes = new byte[str.length() / 2];
for (int i = 0; i < bytes.length; i++)
bytes = (byte) Integer.parseInt(str.substring(2 * i, 2 * i + 2), 16);
return bytes;
public static String getMD5HashFromClob(Clob inhalt) throws Exception{
MessageDigest algorithm;
StringBuffer hexString;
String s = null;
String salida = null;
int i;
byte[] digest;
String tepFordigest = inhalt.getSubString(1L, (int)inhalt.length());
try {
algorithm = MessageDigest.getInstance("MD5_UTF_8");
algorithm.reset();
algorithm.update(tepFordigest.getBytes("UTF-8"));
digest = algorithm.digest();
s = toHexString(digest);
} catch (java.security.NoSuchAlgorithmException nsae) {
s = "No es posible cifrar MD5";
return s;
sho err
alter java source "MD5_UTF_8" compile
sho err
CREATE OR REPLACE FUNCTION get_md5_UTF_8_CLOB(inhalt CLOB) RETURN VARCHAR2 DETERMINISTIC
AS LANGUAGE JAVA
name 'MD5_UTF_8.getMD5HashFromClob(java.sql.Clob) return java.lang.String';
create or replace java source named "MD5" as
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.sql.Clob;
import java.sql.Blob;
public class MD5 {
private static final byte [] hexDigit = {
'0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'
/** Converts a byte array to a hex string
* Returns an empty string if the byte array is null
public static final String toHexString(byte [] bytes) {
if (bytes == null) return new String("");
StringBuffer buf = new StringBuffer(bytes.length * 2);
for (int i = 0; i < bytes.length; i++) {
buf.append((char) hexDigit[((bytes >>> 4) & 0x0F)]);
buf.append((char) hexDigit[(bytes & 0x0F)]);
return buf.toString();
// Convert Hex String to Byte Array
public static final byte[] byteArrayFromHexString(String str) {
byte[] bytes = new byte[str.length() / 2];
for (int i = 0; i < bytes.length; i++)
bytes = (byte) Integer.parseInt(str.substring(2 * i, 2 * i + 2), 16);
return bytes;
public static String getMD5HashFromClob(Clob inhalt) throws Exception{
MessageDigest algorithm;
StringBuffer hexString;
String s = null;
String salida = null;
int i;
byte[] digest;
String tepFordigest = inhalt.getSubString(1L, (int)inhalt.length());
try {
algorithm = MessageDigest.getInstance("MD5");
algorithm.reset();
algorithm.update(tepFordigest.getBytes());
digest = algorithm.digest();
s = toHexString(digest);
} catch (java.security.NoSuchAlgorithmException nsae) {
s = "No es posible cifrar MD5";
return s;
sho err
alter java source "MD5" compile
sho err
CREATE OR REPLACE FUNCTION get_md5_CLOB(inhalt CLOB) RETURN VARCHAR2 DETERMINISTIC
AS LANGUAGE JAVA
name 'MD5.getMD5HashFromClob(java.sql.Clob) return java.lang.String';
I created the above java functions and added the calls to them in my package to see what hash values they would produce but I am getting "ORA-29532: Java call terminated by uncaught Java exception: java.nio.BufferOverflowException " the XML is about 60mb.
package code sniippets:
declare
l_hash raw(2000);
l_checksum_md5 varchar2(2000);
l_checksum_md5_utf_8 varchar2(2000);
Begin
t_checksum := lower(RAWTOHEX(dbms_crypto.hash(src=>l_clob,typ=>dbms_crypto.hash_md5)));
l_hash := get_md5_CLOB (l_clob);
l_checksum_md5 := lower(rawtohex(l_hash));
l_hash := get_md5_UTF_8_CLOB (l_clob);
l_checksum_md5_UTF_8 := lower(rawtohex(l_hash));Please help,
Thank You in advance
Don
Edited by: 972551 on Nov 21, 2012 12:18 PM
Edited by: sabre150 on Nov 21, 2012 11:06 PM
Moderator action : added [code ] tags to format properly. In future please add them yourself.>
I have a problem where the MD5 value from DBMS_CRYPTO does not match the hash value from 3rd party MD5 free tool (MD5 Checksum Calculator 0.0.5.58 or WinMD5Free v1.20) and also the MD5 hash value calculated by an ingestion tool where I am transferring files to. The MD5 hash value that the ingestion tool calculates is the same as the 3rd party MD5 free tools I have.
I found a thread on this forum that also had a similar issue so I copy/paste the java functions.
>
And in that thread (Re: MD5 HASH computed from DBMS_CRYPTO does not match .NET MD5 I provided the reason why DBMS_CRYPTO may not match hashes produced by other methodologies.
I have no idea why you copied and posted all of that Java code the other poster and I provided since code has NOTHING to do with the problem you say you are having. Thte other poster's question was how to write Java code that would produce the same result as DBMS_CRYPTO.
You said your problem was understanding why DBMS_CRYPTO 'does not match the hash value from 3rd party MD5 free tool ...'. and I answered that in the other forum.
>
The Crypto package always converts everything to AL32UTF8 before hashing so if the .NET character set is different the hash will likely be different.
See DBMS_CRYPTO in the PL/SQL Packages and Types doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_crypto.htm
If you look at the spec header for the DBMS_CRYPTO package it shows this note:
-- Prior to encryption, hashing or keyed hashing, CLOB datatype is
-- converted to AL32UTF8. This allows cryptographic data to be
-- transferred and understood between databases with different
-- character sets, across character set changes and between
-- separate processes (for example, Java programs).
-- If your 3rd party MD5 free tool (MD5 Checksum Calculator 0.0.5.58 or WinMD5Free v1.20) do not use the AL32UTF8 character set then the hashes will likely be different. You can't modify DBMS_CRYPTO so if the hashes need to match you need to use 3rd party tools that either use the correct character set or can be configured to use the correct character set.
The problem in the other thread was how to WRITE Java code that uses the correct character set and I showed that OP how to do that.
So unless you are writing your own Java code all of that code you copied and pasted is useless for your use case. -
Dynamically-related files could not be resolved because the site definition is not correct
Hello
My name is Doron and I am a graphic designer
I design with Dreamweaver and I want to connect the WordPress to Dreamweaver
I have a WINDOWS OS 7 64 bit, so I installed Apache Software WampServer 64
I set up WordPress and connected to Dreamweaver but
when I run the index.php and click on discover dynamically-related files.
I got an error:
" dynamically-related files could not be resolved because the site definition is not correct "
I did everything ok I do not know what the problem
I would love to get help connecting Dreamweaver with WordPress
that they could work together so I can continue to learn WordPress
Thanks in advance
doronThe only WP files you should be looking at are in your WP Themes folder. Everything else is off limits. See links below:
WordPress theme - The Anatomy, an Infographic - Yoast
Theme Development « WordPress Codex
DW is only useful for customizing your Theme. Once WP is deployed on your web server, you must use WP's online Dashboard to maintain it.
Dashboard — Support — WordPress.com
Administration Screens « WordPress Codex
Nancy O. -
Why the default value is not the Oracle recommended?
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com -
Data type of the base attribute or the base value does not match...
...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
MichaelTechnically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
SQLDataType="NUMBER(12,2)"
ETMeasureColumnName="REGISTRATIONS"
Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template. -
Error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap
Hello Experts
The error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap occurs after manager’s following actions:
selected detailed Team View ;
selected hierarchy;
changed style of the hierarchy to any other (for example, the vertical);
the error occurs after attempting to do any action.
Our system is EHP7.
If someone faced with this error, please give me advice how can i resolve this problem.Hi John,
Sorry for the delay in replying. No, we do not have the same problem if we understand you correctly.
"We have bypassed the MSS Home Page and just embedded the Detailed Team View as a standalone application in our MSS portal role" - we also made for the our customer. BUT we have error «The entered value is not on the list of valid values» in our standard system.
Regards,
Andrey
Maybe you are looking for
-
I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. I need to charge my phone but it's not letting me!! Please help!
-
Move image in Pages document to iPhoto
I received some photos that were imbedded in a Word document as images. I want to transfer the photos to iPhoto to use in a slideshow. How can I transfer them from Word or Pages to iPhoto? The person that sent them to me is a newbie and deleted the o
-
IPad alignment issues - any more suggestions in late 2013?
Hi, I realise that this question has been asked before, but many of the replies are from over a year ago, so I am wondering if anyone can shed anymore light on it? I have a site I designed in Muse that displays justified left on an ipad and iphone, r
-
Register serial number problem?
i just got this new iPad air 128gb from Amazon, it came from their warehouse as like new, most liking meaning open box. Anyway when k try to go register the serial number to my Apple ID, it says it is already linked to another apple id. How do I go a
-
Transaction Code: F.30 (DSO analysis) question
Hi Experts, I have a requirement where in I need to create a custom program similar to the functionality of transaction F.30. I need to create a report similar to DSO analysis but the grouping is by another field name (BSEG-SEGMENT). My question is W