Credit Block and Order Confirmation

I have a requirement where the client would like to send out some sort of an 'Order Acknowledgement' as soon as the order is saved if the order goes on Credit Hold. The system is set up to generate an order confirmation when there are no credit credit blocks. Standard SAP would not generate a BA00 output on save since the sales order is incomplete. Once the credit hold is removed and the order is saved the system will automatically generate that output (since the order will be complete) but till such time as the credit hold is not removed how can I generate an output to be sent to the customer just to indicate that their order has been received?
Suggestions would be greatly appreciated.
Thanks in advance.

Hi
Create a new Output Type (Copy of BA00) and assign the same in your Output Procedure in NACE Transaction. For this new Output Type do not maintain any requirement or maintain a new requirement (can be created in VOFM) as per your logic and assign the same for your new Output Type. You may also check the Requiremnt 9 and 11 if that is of your any use.
Regards
Amitesh Anand

Similar Messages

  • Credit blocked sales order and shipping due list

    Hello all,
    We would like to see credit blocked sales order in the shipping due list (VL10C)
    First we have modified a user exit to have schedule lines quantity confirmed even when the sales order is credit blocked. It works fine but still the schedule lines do not appear in the shipping due list.
    Do you know some way to make this lines appear in the shipping due list ?
    Thank you in advance.

    hello, friend.
    i believe that you can configure the system in such a way that even if a sales order is blocked for credit, the requirements will still be passed on to PP/MM.  however, as long as the delivery block (for credit reasons) remain in the sales order, this order will not appear in delivery due list. 
    i have to ask you:  if you want the blocked order to appear in delivery due list, why block the order at all?  an alternative to listing orders still not delivered would be to use t-code VA05 or VA05N and specify 'open' orders.
    hope this helped.
    regards.

  • BOP results for credit blocked customer orders

    Hello all,
    We are facing an issue with BOP. We use the backorder processing in order to confirm the customer orders quantity. When the customer order has a credit block status, the quantity is apparently confirmed in result work list (immediately comes after BOP run) and using transaction /SAPAPO/BOP_RESULT, but in table /SAPAPO/BOPRESLT the fields CNFQTY and NEWCNFQTY are empty.
    Is it possible to change this behavior?
    Thaks in advance.
    Regards,
    Januario Faria

    Hello All,
    My issue was solved using the suggestion below posted on the thread - Sales Order Credit Status Block with Schedule Line ATP Confirmed Quantity .
    We modified this SD configuration and the quantity has to be confirmed to sales orders with credit block using BOP processing.
    Thanks to all.
    Bests regards.
    Januario Faria
    link:
    [Sales Order Credit Status Block with Schedule Line ATP Confirmed Quantity;
    Hi ,
    Please go to Transfer of requirements-->maintain requirements for transfer of requirements and remove the 101 Routine number so that when credit block on order still the quantity is confirmed to sales order. Because of this Routine it is removing the reservation while in credit block.
    I have tested it and it is working. I have similar scenario and it is working fine.
    Regards
    Raj

  • Credit blocked sales order in ECC

    Is there a standard way to prevent a credit blocked sales order from flowing to APO, from ECC?
    Thanks,
    Satish

    Hi Satish,
    The only way to restrict an order line item to APO is to assign a reason for rejection to it..
    The other way is to identify a credit block in ECC sales order out bound exit EXIT_SAPLCSLS_002  and delete the sales order in the CIF.
    Regards
    Vaibhav

  • Workflow in the releasing of Credit blocked sales orders.

    Hi All,
    My Client requirement is that they need workflow in the releasing of credit blocked sales orders.
    If once sales order is blocked then it should be approved at 3 levels, then only it should be released.
    Suggestions are highly appreciated 
    Regards,
    Kumar

    Hi Kumar,
    I think you can achieve this by using Authorization Concept.
    Please find the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
    Authorization levels for Credit Rep Groups
    Thanks
    Dasaradha
    Edited by: dasaradha ramireddy on Nov 28, 2011 12:53 PM

  • Invoices, Customer Statements and Order Confirmation

    If one customer wants these things sent to three different places how and where do I look to configure this. i.e. They want their invoice to arrive in an office in Indiana, and the confirmation in Michigan.
    Any help would be great.
    Thanks
    Justin

    Hi Justin
    Here is the link from SAP help on the EDI settings for invoice and order confirmation
    http://help.sap.com/saphelp_47x200/helpdata/en/f0/4228f2a97311d2897a0000e8216438/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/4b/ad4ecb17fd11d28a360000e829fbbd/frameset.htm
    But all this should be setup in co-operation with the EDI consultant.
    Thanks
    Ashok
    Award points if this is useful

  • Invoice and Order Confirmation automatic Print

    Hi everyone,
    The user wants the following configurations:
    Automatic printing of Invoices and Order Confirmations to the following printer: #$%$#%#%u2026.this printer is located on the following server: $%$#%$#
    Thanks for prompt response
    Nick

    Hi,
    Try this method and see.
    Ask your Basis to set the LOCAL Printer in SAP.
    Then go to that users computer and set the Default Printer of that Machine to the printer: #$%$#%#%.
    Then once Invoice is saved, SAP will send it to LOCAL Printer in SAP, Then from there it'll automatically direct to the Default Printer of the machine.
    So, for each user you can set the default printer as required.
    We do same when we need to get a PDF output of Invoice. What we have asked was to set the user computer default printer as PDF Writer as & when they want PDF format of the Invoice.
    Same way as mentioned above, it sends to LOCAL, & then to machine default printer (PDF Writer), where you can save the PDF.
    Try and see !
    Best regards,
    Anupa

  • Diff between Credit block and credit hold

    hi all,
    plz tel me the diff between credit block and credit hold
    rgds,
    raj..

    hi all,
    plz tel me the diff between credit block and credit hold
    rgds,
    raj..

  • Static Credit Checks - Open orders - Confirmed quantity vs total quantity

    We are using static credit checks. Credit currently only sees open orders with a confirmed quanitity.
    Customer orders 10 items we have 5 in stock. Credit check runs, credit is evaluated basd on the confirmed open quanitity of 5. The order gets a credit block. Credit rep releases the order.
    A few days later the balance of the order arrives in the warehouse. The remaining 5 are confirmed on the order. Since the confirmed quantity has been increased and subsequently the confirmed open value, the order goes back to credit.
    We frequently encounter this situatuion and are looking for ways to reduce the number of credit round trips.
    If we wanted to base the credit check on the total quantity / order value, as opposed to the confirmed quantity / value what do we need to change.
    Insights are appreciated.
    Edited by: tooCann on May 14, 2008 2:30 PM
    Edited by: tooCann on May 14, 2008 2:31 PM

    Hi cann
    As you are going with static credit checks, system will check the order and if it exceeds it will throw an message (error , warning )
    Now again , if you create another sales order , that value will not be taken into consideration , system again will check for the credit limit amount
    For example :
    credit limit - 10000
    sales orders - 1010, 1011
    1010 sales order value - 11000
    1011 sales order value - 10500
    Now when you create a sales order system will check the credit limit 10000. and once you save it and create another sales order (1011), again system will check for the same credit limit 10000.
    The credit limit gets reset  once the order is saved ,in static check
    Now any open quantities are there means and when it gets confirmed then system will check for those open quantity also
    To minimize all these use dynamic credit check
    Regards
    Srinath

  • Credit block and Availability Check

    Hi,
    As per standard behavior when there is credit block in sales order, system does not confirm the quantities when the sales order is saved even though receipt elements are available during availability check.
    Is there any way to confirm the quantities even though sales order is into credit block.
    Regards,
    RS

    Hello,
    In requirement like yours we can Confirm the Quantities & insert a Delivery Block. To do this follow as below:
    IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Transfer of Requirements - Block Quantity Confirmation In Delivery Blocks - Deliveries: Blocking Reasons/Criteria -
    Here for Delivery Block 01 - Credit LImit - There will be a tick mark in Confirmation block (Conf) Box. Remove this tick mark & then system will Confirm the Stock inspite of Credit Block.
    These block are defined here:
    IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Transfer of Requirements - Block Quantity Confirmation In Delivery Blocks - Reasons for and Scope of Deliv.Blocks: Transfer of Req.Block
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Credit Block at order level

    Hi Friends,
    I have created a sales order with quantity of  10 and it went to credit block. I have released this doc and created a delivery for the qty 5 and PGIed. (dynamic credit check is activated)
    Now i have added one more item to the order and released that document using VKM3 and if i try now to create a delivery, system gives a error message " order blocked for deliveryas a result of credit check".
    I have released this order many times using VKM3 , but still i am getting the same error message " order blocked for delivery as a result of credit check", henc not able to create a delivery.
    Can some one help me out on this.
    Thanks & Regards,
    Ashok S

    Hi Friends,
    1. At the time of creating a delivery I am getting this error. so how can we release a delivery without creating ..
    Hi Raja,
    After releasing the sales doc using  VKM3, If I try creating a delivery using VL01N, then system will not give any error.
    And also, if i go to VA03 (display mode ) and try to create a delivery from the sales doc (sales doc --> deliver), system not giving any error.
    But If I go to VA02 and try to deliver from the sales doc (sales doc --> deliver), system GIVES AN ERROR.
    One more observation is that Even after releasing the sales doc using VKM3, if I go to change mode of sales doc and comes back. then system automatically putting credit block to my sales doc. Can any one please give an idea why it is happening like that.
    Thanks,
    Ashok Sakamuri.
    Edited by: Ashok Sakamuri on Jul 29, 2009 2:41 PM

  • Credit block in orders

    Hello experts,
    How NOT to block a sale order as a result of credit management once the block is released.
    Because of credit reasons, sale order is blocked. Then the credit manager releases the block. Then again, sales admin change the order that do not affect the value of the order. Now, the credit block is set again because of the change. The requirement is not to set the block if the order value does not increase during any type of change.
    Will reward points for help.
    UV

    When a credit check is released it is considered good for the number of days in the "released documents still unchecked".  This is a field on the OVA8 credit control screen.  Generally this field comes blank which means the credit release is only good for 1 day.  Any changes made after that 1 day go through a credit check again. 
    We  had this happen on delivery notes and we decided to make them good for 7 days.  So any changes within that 7 day period at the same value (with the exception of value increases) would not cause it to go on hold again.  After the 7 days changes did go back on the credit hold listing.
    See if you can use this field to your advantage!
    Good Luck!
    Debbie

  • MRP Run For Credit Blocked Sales Orders

    Hi
    Does any one know how to prevent the generation of planned orders for Sales orders which
    have been credit blocked. At the moment the reservation is still visible on MD04 and is therefore
    planned during the MRP run. As a result manufacturing continues for these sales orders.

    As far as credit block is concern; what it means is that delivery will not be done for this customer via VL01N.
    This means if you have blocked this customer in FD32; no delivery to be done
    It may not be linked with MRP calculation b'cos it comes into picture while doing delivery & not during planning
    Rgds

  • Credit block and release Date and time

    Dear All,
    I require a report which can display credit block status date and time and  credit release status date and time for sales order. I have gone through the report RSSCD100 with object class VERKBELEG.It is not fullfilling the requirement as it only display change information.
    If customer has already exceeded the credit limit and new sales order has been generated then this report will reflect its blocked status.
    Kinldy help
    Thank you,
    NoMi

    Hi,
    IF it is not mentioned in single program .
    You can develop a query by using multiple program. Please find the list of programs for CM
    +Reports for Credit Management+
    The following table provides an overview of all the reports available to you in the area of credit
    management
    Program Function
    RFDKLI10 Customers with missing credit data
    This report checks the data for the credit limit for completeness, and produces
    the corresponding error lists. These can be used to re-maintain the
    corresponding definitions manually, or per Batch Input.
    RFDKLI20 Reorganization of credit limit for customers
    This report enables you to reorganize the credit limit information in the control
    areas.
    RFDKLI30 Short overview credit limit
    The report lists the central and control area-related data per customer.
    RFDKLI40 Overview credit limit
    The report provides you with an extensive overview of the customeru2019s credit
    situation.
    RFDKLI41 Credit master sheet
    The credit master sheet enables you to display and print out the customer
    master data for a single account, which is needed for the area of credit
    management.
    RFDKLI42 Early warning list
    The early warning list enables you to display and print out customers in credit
    management, who are viewed as critical customers in the area of credit checks
    in SD.
    RFDKLI43 Master data list
    The master data list enables you to display and print out customersu2019 credit cards.
    In particular, you can display information not contained in the standard system,
    for example, user-defined fields or external data, which you have created with
    specific additonal software.
    RFDKLI50 Mass change credit limit data
    This report allows quick mass change for master data in credit management.
    RFDKLIAB Change display, credit management
    With this report, you can display changes for credit management master data for
    all accounts.
    RVKRED06 Checking blocked credit documents
    The report checks all blocked documents from credit view. The report is started
    in the background, and should run after the incoming payments programs.
    FI/SD - Credit Management/Risk Management SAP AG
    Reports for Credit Management
    RVKRED77 Reorganization credit data SD
    The report enables you to reorganize open credit, delivery and billing document
    values. It is used, for example, when updating errors occur.
    RVKRED08 Checking sales documents which reach the credit horizon
    The report checks all sales documents, which reach the dynamic credit check
    horizon, as new. The report runs periodically, and should run at the start of a
    period. The period for the u2018date of the next credit checku2019 is proposed from the
    current date, with the help of the period split for open sales order values.
    RVKRED09 Checking the credit documents from credit view
    Released documents are only checked if the validity period for the release has
    run out (number days).
    RVKRED88 Simulation reorganization credit data SD
    REgards,
    Krishna O
    Edited by: Krishna O on May 20, 2010 11:30 AM

  • Credit Block And Price Pending Fields

    hi,
    I need to write a report on the sales orders that have credit checks and price pending blocks on them, in other words those orders that appear on vkm1 and v.25, but i can't seem to find the fields that indicate whether the order is blocked for either checks.
    Could somebody please help ?

    did u checked tcode NACE--->processing routines -->program + form names.
    regards
    Prabhu

Maybe you are looking for