CRIO can't seem to doscover my SEA 3G module
Hi there,
I dont't suppose anyone is familiar with the cRIO compatible SEA 3G Mobile communication Module 9721?
Basically I want to access the GSM on the mdule from the cRIO to send an SMS when a certain condition is reached. I have used the example SMS code with the module connected to my Host PC via ethernt and it works perfectly however when I connect the module to the cRIO directly and set the code to discover the module IP address, it times out.
I have been in contact with SEA several times but they have been of no help at all. I'm just wondeinrg if perhaps anyone might have used this module before and might know where I'm going wrong? Any help is much appreciated,
Kindest Regards,
Kelly
Solved!
Go to Solution.
Hi Kelly,
I would like to help you but first can I ask:
Can you please detail on what you mean with “when I connect the module to the cRIO directly and set the code to discover the module IP address, it times out.” Are you trying to connect the Ethernet port of the 9721 to the Ethernet port of the CompactRIO?
Is your goal to have the cRIO running heedlessly (i.e. not connected to a computer) and still send SMS messages using the 9721?
Is there an error code you’re seeing? If so, can you please attach a screenshot of it?
Can you please attach the SMS example VI you mentioned? I don’t seem to be able to simulate a 9721 in LabVIEW 2013, but at least I can have a look over the part of the code that could generate a time out error.
What cRIO are you using?
What version of LabVIEW are you using?
What did SEA say about this?
Any other information you feel relevant.
I am looking forward to helping you with this application.
Similar Messages
-
Hi there,
I have just done a custom run on my Ipod touch 2nd Gen of 12k. When I finished the run is appearing in my run history on my iPod touch, however it is not appearing in my itunes 'Nike+' tab, or on the Nike + website. I can't seem to get this run to sync and it is really annoying because I'll be loosing 12k. Can anyone help or has experienced this before? I know there are solutions to add runs to iPod nano's and older iPods using the 'Enable disk' and iPod_control function however from what I'm aware you cannot do this on an iPod touch. Can anyone please help?
Many thanks
PhilYou should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
ITunes 8.1 Can't Seem to do More Than One Thing at a Time
I upgraded to 8.1 and now, rather than a "faster" iTunes experience as was advertised on Apple's website, iTunes can't seem to do more than one thing at a time without locking up the application completely. For instance, when trying to download podcasts if I choose to hit more than one "Get" button at a time iTunes will freeze up until the first podcast has completely downloaded. During this time I cannot access any other screen in iTunes at all.
This freezing of iTunes also occurred while I was trying to sync my iPhone 3G. I received the Calendar sync error that a few other people have mentioned on the forum and wanted to turn off Calendar sync (since I don't use it and don't understand why iTunes turned it on by default, apparently, after the upgrade) but I had to wait for my iPhone 3G to completely sync before I could gain access to any of the tabs in the iPhone sync window.
So, basically it seems like the new version of iTunes (8.1) really doesn't like to be bothered while it is trying to copy data from one place to another.
Any ideas?I'm using Vista Ultimate 64-bit and iTunes 8.1 installed OK, but required a restart of the entire OS after upgrading. It takes forever to launch, clicking on certain items (like applications) causes itunes to freeze for about 15-30 seconds before it continues (this is actually something that's been there since the introduction of the app store), I've had to switch my library view to LIST and avoid any sort of album art. Using album art to view my library causes iTunes to be extremely, obnoxiously unresponsive.
The best part - plugging in my iPhone to sync it... iTunes simply sits there dumbly - doesn't even recognize that I've plugged my iPhone in. So now I can't even sync. QUALITY product, quality. So the app I'm FORCED to use to manage my phone doesn't even work after upgrading. Outstanding.
I'm terrified of uninstalling and reinstalling... the last time I did that with iTunes it jacked my library up... it "lost" all of my music... basically it disassociated all of the music (even the stuff purchased through the itunes store) with the index file so I had to re-import EVERY song and delete the duplicate entry.
I searched a ton of forums looking for any clues as to how I could improve performance... All I run into is apple fan boys flaming any and all forums to the point of PC *****, no Apple *****, and so forth. Extremely unhelpful.
The fact is this - if I wasn't forced to use iTunes to manage my non-jailbroken iPhone 3G, then I'd dump it completely. It is a horrible app. Why punish the customers that haven't gone the route of "jail breaking" their iPhones?
One individual on one of the forums suggested that blue screens, and all the other random errors, including slow performance were due to a lack of RAM. I have 4GB of RAM on my machine I can run a virtual Fedora core 9 machine and a virtual WinXP machine on my Vista x64 box and still not have any performance issues with those two virtuals in the background sucking up system resources, yet with nothing open and less than 50% of my 4GB of RAM in use iTunes performance is abysmal. I have not run into any other application on my Vista machine that performs as badly as iTunes.
And Apple is touting a "64-bit" version of iTunes - it isn't. The applications the 64-bit installer installs are all 32-bit.
So, I'm searching as the two of you are for an answer to horrible performance of iTunes.
Even exiting out of iTunes takes a day and a half... "saving itunes library".... And my "library" isn't that big. -
syncing iphone and can't seem to transfer audiobooks that i have put in a playlist. Sync menu doesn't show all playlists. Help
I have the same problem with podcast playlists. When I go to the music window in my iPhone devices section, the playlists I have created on my macbook pro in iTunes do not appear as an option to sync with the iPhone. I know some web radios streams, like the BBC, won't transfer because of compatibility issues, but the playlists of podcasts that I have created consist entirely of podcasts downloaded from the podcasts section on the iTunes Music Store. They used to show up and sync properly before I upgraded to OS 5.1.1, but now they don't.
Does anyone have a fix and am I right in surmising that the cause is a glitch in OS 5.1.1? -
Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.
1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2 -
I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?
Yes, it's frustrating.
I don't have my iPod with me but, as I recall, the change is done in Settings/Store. That change will apply to NEW purchases. However, be aware that all purchases are permanently associated with the Apple ID that was originally used. Generally, it's only a problem when you need to update an app. IF you do your updating from iTunes and your logged in to the "wrong" ID, you'll need to log out and back in again. It's easier from the iPod as you do not need to log out/in but you do need to know the password.
Unfortunately, you can not merge IDs nor can you transfer purchases from one ID to another. Go here to find out exactly what you have. I have the same problem so I deliberately made both passwords identical to make things slightly easier for me. -
The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time" -
Can't seem to update firmware on Zen Xtra (3
I am having trouble upgrading firmware on player.
I am trying to go from .0.0 to .20.08.
Followed instructions and removed current OS from player.
Launched the upgrade firmware file and followed instructions.
Where I seem to be having trouble...is after the upgrade seems to be proceeding nicely and get to the end of the progress status bar...the PC GUI says "the player is now rebooting"...but
the player does not rebot.
I think this is necessary...because if I manually boot from the rescue menu...i simply go back to the original OS.
I am having other trouble as well.
I am trying to upgrade the firmware because i can't seem to get any music to transfer to the player anymore.
I have not tried to move content into the player for along time...and since that time I have a new PC.
I can't seem to put my hands on the original CD that came with the player...so I went to the Creative Website and downloaded the most recent Media Source Organizer. It gives me a file transfer error when I try to move new content onto the player...so I thought I would update the firmware on the player.
Any help would be appreciated....thank you very much.Try the easiest and alternate way by downloading from here
* getfirefox.com -
I recently launched a podcast series (http://itunes.apple.com/ca/podcast/notes-from-northwest-passage/id449063851) but its still showing an older description text with some typos and an incorrect link in it, as I registered it with a pre-edited file so it would be in line for review while I finalized the details, and now I can't seem to get it to refresh and show the new texts at all, even though I edited the description texts in the xml file well over 2-3 weeks ago.
I've tried redoing this file several times. It always validates but changes never get picked up by the iTunes store.I can manually subscribe to the feed using iTunes' advanced menu, with no problems. The feed is at:
http://a4.g.akamai.net/7/4/66750/v1/smb2.download.akamai.com/66750/http/podcasts /archaeology2011/arcticarchaeology2011_eng.xml
I recently (about 3-4 days ago) tried redirecting the feed to a new version of the xml file stored in a new folder, just to see if that would somehow jolt it back into reading it, but again after 3-4 days it hasn't done anything.
It's also not showing any of the most recent episodes even though they have all been there about a week, so the store should have picked them up by now, no?
Any suggestions?If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK. -
New to Accessibility and have run into problems I can't seem to find answers to.
At my job I've been trying to learn how to make files accessible for a client. I've watched many videos and scoured forums but there are some issues and can't seem to resolve and was wondering if anyone would be able to assist.
1.Table tagging- all the information I've been able to find on this suggests that you create a table style for your table in indesign and apply it (it doesn't have to have anything in it really, just as long as there is a style applied?). Then make sure you have header row that is tagged as such. I've got that, but beyond that I can't find any more information. I was having to apply paragraph styles to each cell in the table to get it to pass the accessiblity checker in acrobat.
2. Forms- When it comes to tagging forms in my pdf, I was having to click on "find" under the tags panel and manually tag them, then manually move them to their correct locations. Is there a better way to do this? Also, I was hoping I could copy and paste forms from one document to the next but I lose all tags on those forms when I do that.
3. I have a lot of documents where I have "*" or "†" used next to a word to trigger a legal disclosure at the bottom of the document. Would the proper way to use these be to make them a hyperlink to the disclosures at the bottom? I was initially going to cross-reference them to the disclosures, but since the cross-reference places new text (ex, See below, or See Section Title), I would then have to re-submit all my text to legal to have them approve it all over again.
4. I have created metadata information for a logo used in my files but I notice it has the tag name "pathpathpathpathpath". Any clue why?
5. Sometimes words are broken into two or three tags instead of one fluid word tag, such as c or poration, instead of just corporation.
6. Everytime I run the accessiblity checker I get the notification that "tab order failed". I know I can right click and hit fix, is that ok?
7. I sometimes have empty tags where a space is, do I need to delete these?
8. I can't seem to get the whole document to read aloud to test it. I can get it to read the copy I've selected but I can't really test the reading order on this.
Sorry for all these questions!1. I am not an Indesign user, so I cannot help you there. Table tagging in Acrobat can be complex, especially if the table is not regular (same number of cells in every row). Please post any specific questions regarding table tagging.
2. I do not know of an easier way of tagging form fields. With practice, it is not too burdensome. After all the work of creating, positioning, and configuring the form fields, I find tagging the fields to be the easiest step.
3. I would tag the "*" or "†" as an in-line Reference, tag the disclosure as a Note, then position the Note as close as practical to the Reference in the document structure without disrupting the reading flow. Usually this is right after the paragraph that includes the Reference.
4. This is normal. “path” is the word Acrobat uses for a some graphical elements. If the metadata is alt text you will find it in the tag properties.
5. I would retag the paragraph (or header, or whatever it is) using the Touchup Reading Order tool.
6. In the Acrobat Page Thumbnails pane, select all the pages then right-click, Page Properties, and select Use Document Structure on the Tab Order pane.
7. The tags are probably not empty, but rather contain the space character. These do not seem to cause any problems but to me they clutter up the tag tree so I tag the spaces as background artifacts.
8. An easier way to check the reading order is to use a tool that lets you see the document in the way an AT user would hear it. PDFgoHTML from Callas Software (http://www.callassoftware.com/callas/doku.php/en:products:pdfgohtml), and the screen-reader preview feature in PAC 1.3 (http://www.access-for-all.ch/en/pdf-lab/pdf-accessibility-checker-pac/dl132.html) are my favorites.
Hope some of this helps. Please post any follow-up questions (for best results – one at a time with as much detail as practical on the problem :-) ).
a 'C' student -
I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.
OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options -
My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?
Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out. -
I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.
This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?
-
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
Hi, I'm an ipod newbie, and unsure of what product i have-i believe it's an ipod nano, but can't seem to find any info on itunes that will identify my product.
how do i move ipod nano music to a new Windows 7 computer? My old computer died and when i try to sync to itunes on my new Windows computer, it says it will erase what's on the ipod. I can't seem to de-authorize the old computer (it's been recycled). Does this mean I have to start all over and read in my CD's into itunes? seems very inflexible/inelegant...
thanks for your help, sorry if this question has already been answered before!Is there no ANSWER TO THIS PROBLEM?
Maybe you are looking for
-
Work around / fix for making a list of drop down boxes
Dear experts, When lists are created, its cells act like top-level views. Because of this, everything attempting to go past the border of the list item is clipped. This is a problem when making a list of drop down boxes. Is there a known work around
-
How to connect to Oracle database from webdynprojava application
Hi How to connect to Oracle database from webdynprojava application. where can we provide the code to connect to database.? Thank You.
-
Grid View: Meant to be squared
I just noticed this while looking into other's issues with Grid View. Apparently, if you have album covers that are not square they will not be rendered as well in Grid View when sorted by artist; I would guess the issue would also occur if you brows
-
Will Apple exchange my iPod touch 4g with a new one if my current one is deffective
Ok so, I got my iPod touch 4g (white) on June 19th after i made a bet with my moms boyfriend to not drink pop for a year So when I opened the iPod, it wouldnt connect to wi-fi. Guys, dont ask me to reset network settings or anything, because.. IVE TR
-
Distrib -e "Arch(org|code|pkgs|aur|forum|wiki|bugs|.*)?" -- thoughts
design the output of every tool we use to look like merge-able chains in a DSCM. this is something i've been thinking about long before i came to Arch. i want to see next-generation package/configuration/change management in a distributed distributi