CRM 2015 Disable System User is not firing a plugin

Hi,
I have a plugin registered on both SetState and SetStateDynamic on systemuser Entity that needs to be fired when the user is disabled from the office365 portal.
The problem is that the plugin is not fired when the user is disabled?
Is there anyway or any other messaged used in such situation?
Appreciate your help.
Thanks.
Zarour

Hi ,
Please call you plugin on update of Systemuser entity,
Regards
Ayazahmed
Ayaz

Similar Messages

When creating application: SYS and SYSTEM users may not create applications

Dear all,
When i am performing the below mentioned operations
1) Importing Application
2) Create Application
3) Create from Spreadsheet
4) Demonstration Application
am getting this error message
"SYS and SYSTEM users may not create applications"
Please do the needfull

Create application using SYS or SYSTEM user is not good idea. Your objects will be created in SYSTEM tablespace, it's fatal option. Create new Workspace and create there your app.

System user is not working

Hi everybody,
We have created a function in SAP that executes a transaction -fv60- filling it with the data that we have in an idoc that XI have sent to SAP previously. If we execute the function with a dialog user, everything goes ok but if we try to execute it with a system user -we have tried with a communication user too- it does not work. There is no error in the trace when we use the system user., We can not use a dialog user due to security reason. Any idea?
Thanks in advance for your help
Diana

You do not have authorization to see user detials in prodcution. Ask Basis team to get you auth. and then this BAPI will work,
Basically, u dont have authorization to object S_USER_GRP in prod. Get auth to this object from basis

Not able to connect to orcl database other than system user

Hi,
I am getting the following error when I am trying to connect to orcl database.
I had created a user 'jeff' on oracle and oracle_sid is already set and database is up.listener is started, tnsnames.ora, listenrer.ora are configured.What other problem can be?
The point is that I am able to connect to orcl using "system" user but not "jeff".
If possible can you send me the snippet of commands to create user , granting privilege to orcl. I had refered oracle guide but may be I am doing some silly mistake.
sqlplus /nolog;
SQL>connect /@orcl;
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Feb 12 10:11:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: jeff
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
Linux Error: 13: Permission denied
Thanks,
Sayantani

Are you working on the same machine where you installed the database and created the user ? If yes, then there is no need of giving @tnsname option. You can directly use sqlplus scott/tiger command to login from the prompt.
If from another machine and provided you have configured oracle networking, you can login as follows.
C:\>sqlplus scott/tiger@yourtnsname
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Feb 12 08:10:06 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>

How to migrate waiting stage workflows in ms crm 2015

Hi,
We are migrating the data from ms crm 2011 on-premise to ms crm 2015 on-line.
So how to migrate the ms crm 2011 on-premise waiting stage workflows to crm 2015 on-line?
Is there anyway to migrate these workflows or workaround? Please suggest
Its very urgent.
Thanks,
Yadav
Yadav

Hello Yadav,
If you want to migrate from CRM 2011 on premise to CRM 2015 online, unfortunately this is not possible in single step. You would have to first upgrade to CRM 2013 and then only you can upgarde to CRM 2015.
CRM 2011 -> CRM 2013 SP1 -> CRM 2015
Refer https://technet.microsoft.com/en-us/library/hh699673.aspx
For On Premise to Online migration, all customizations has to be exported through a solution. And if your database is big you need to plan your migration using a DM tool like scribe.
Now coming on to your original question, the answer is if you just migrate database, everything will be in same state as it was earlier in your old environment, and will continue the same way. The records for which workflow are in waiting state or in progress
will be resumed again automatically once the migration is completed, if you will stop "CRM Aynchronous Service" then all workflows will be in waiting state so when you will resume the service again then the system will resume those workflows again.
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

Dynamics CRM 2015 Install requires Active Directory on VM Windows 2012 R2 Server

Hello,
I'm trying to install Dynamics CRM 2015 on a standalone VM not connected to a domain (it's running under WIndows 8.1 Professional). The VM was configured using WIndows Server 2012 R2. I'm getting an error message shortly into the install process stating
it needs to access Active Directory.
How can I get around this issue - I just want to Install this CRM on the VM without getting into complicate network/AD issues.
Can you please advise ?
SO many thanks,
John

CRM requires AD no way around that so the most likely solution is to install it on that server or on a VM not connected to your other networks
Jason Lattimer
My Blog - Follow me on Twitter - LinkedIn

How Remove Sample User Form CRM 2015 Online

I have CRM 2015 Online and Use Sample Data And Sample User
I have remove the Sample Data which is removed but how I remove the Sample User
There is no option for delete and Disable User in CRM 2015 Online on System User Entity
One thing More in Office 365 Admin there is No Sample User Exists so that I can delete or Disable
Muhammad Sohail

Like Every CRM 2015 Online contain Built in Sample Data (Accounts,Contacts,Leads,Opportunities,Cases,Campaigns,Goals)
Similarly have CRM User Approx 24 User and these user not showing in Office 365 Licensed User List.
I remove the sample data and also want to delete or disable that sample (demo) users but how??
Muhammad Sohail

How do I compare two csv files and not disable the user if the username is found in the 2nd file using powershell?

Hi Guys
I have two csv files with the following headers and I need to import both files into the script to check whether the StaffCode is present in the Creation/Renewal of Contract csv in a DisableAccount Script so I can stop any action to disable the account as
the staff has renewed the contract with the company so the account should not be disabled.
However my accounts are still being disabled. I am not sure now to construct the query so that it detects that the account is to be left alone if the staffcode is present in both files
I does recognize that the $staffcodeN in the renewal file matches the $staffcode in the termination file
but still proceeds to disable or set an expiry date to the account anyway based on the termination file.
How do I stop it from doing that?
1)In the Creation/Renewal of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityNo,DateJoin,Grade,Dept,LastUpdateDate,EffectiveDate
2)In the Disable of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityno,LastDateWorked,Grade,Dept,LastUpdateDate,
My data is not very clean , I have a-lot of special characters such as = , ' ,/ and \ characters to remove first before i can compare the data
Thanks for the help in advance.
Yours Sincrely
Vicki
The following is a short snippet of the code
$opencsv = import-csv "D:\scripts\Termination.csv"
$opencsv2 = import-csv "D:\scripts\RenewContractandNewStaff.csv"
foreach ($usertoaction in $opencsv)
$Trancode = $usertoactionTranCode
$StaffCode = $usertoaction.StaffCode.replace("=","").replace('"','')
$LastName = [string]$usertoaction.LastName.Replace("/","\/").Replace(",","\,")
$FirstName = [string]$usertoaction.FirstName.Replace("/","\/").Replace(",","\,")
$socialsecurityno = $usertoaction.SocialSecurityNo.replace("=","").replace('"','')
$DateJoin = $usertoaction.DateJoin.replace("=","").replace('"','')
$LastDateWorked = $usertoaction.LastDateWorked.replace("=","").replace('"','')
$Grade = [string]$usertoaction.Grade
$Dept = [string]$usertoaction.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$AccountExpiry = [datetime]::Now.ToString($LastDateWorked)
foreach ($usertoaction2 in $opencsv2)
$TrancodeN = $usertoaction2.TranCode
$StaffCodeN = $usertoaction2.StaffCode.replace("=","").replace('"','')
$socialsecurityNoN= $usertoaction2.SocialSecurityNo.replace("=","").replace('"','')
$DateJoinN = $usertoaction2.DateJoin.replace("=","").replace('"','')
$GradeN = [string]$usertoaction2.Grade
$DeptN = $usertoaction2.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$EffectiveDate = $usertoaction.EffectiveDate.replace("=","").replace('"','')
$LastName2 = [string]$usertoaction2.LastName.Replace(",", "").Replace("/","").trim()
$FirstName2 = [string]$usertoaction2.FirstName.Replace("/","").trim()
# Use DirectorySearcher to find the DN of the user from the sAMAccountName.
$Domain = [System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()
$Root = $Domain.GetDirectoryEntry()
$Searcher = [System.DirectoryServices.DirectorySearcher]$Root
$Searcher.Filter = "(sAMAccountName=$samaccountname)"
$doesuserexist1 = $Searcher.Findall()
if ($doesuserexist1 -eq $Null)
{Write-Host $samaccountname "account does not exist"}
elseif ($StaffCodeN -match $staffcode)
write-host "user has renewed the contract, no action taken"
else
if(($lastupdatedate -ne $null)-or($LastDateWorked -ne $null))
write-host "Setting Account Expiry to"$accountexpirydate
#$ChangeUser.AccountExpires = $accountexpirydate
#$Changeuser.setinfo()
if ($UserMailforwarding -ne $null)
#Set Account expiry date to Last Date Worked
# $ChangeUser.AccountExpires = $accountexpirydate
# $Changeuser.setinfo()
write-host "staff" $displayname "with staff employee no" $samaccountname "has
mailforwarding"
Write-host "Please disable the account manually via Active Directory Users & Computers and
Elseif ($accountexpirydate -lt $todaysdate)
#disable the account

Hi Vicki,
This Forum has an insert-codeblock function. Using it will make your script far more readable
Your script is missing some parts, it is impossible to follow the problem.
You are performing the same string cleaning action on $opencsv2 for each element in $opencsv, when doing it once should suffice. Why not start it all by cleaning the values and storing the cleaned values in new arrays?
The Compare-Object function is great, why not take it out for a stroll on these lists, it might just safe you lots of unnecessarily complicated code ...
You are creating a new $Domain, $Root and $Searcher object each iteration, when doing it once should suffice. Probably not much of a time-saver, but every little thing contributes.
Try pinpointing the problem by doing extensive logging, not only by writing which action was taken, but writing the inidividual information (variables, mostly) before evaluation occurs. Your if/elseif/else looks sound, so if it's still not doing what you
want, the ingoing data must be different from what you think should be there.
Cheers,
Fred
There's no place like 127.0.0.1

Third party system user click the url iam getting error?in sap crm IC

Hi Team,
I have given URL to Thrid Party systems.user clicks the link,then he enter the password and username then its getting error like as below..Please help here what settings we need to do.
Third party system user clicks the URL link ,after entering username password Iam getting error ?
Thanks
Kalpana

HI Team,
I have added the parameter crm-ext-integration=true , or we need to any settings for this..Could you please help here..
Error: TO help protect the security of information you enter into this website,the publisher of this
content does not allow it to be displayed in a frame
Thanks
Kalpana

CRM 2015 outlook client does not connect to CRM

Hi,
I am trying to run the configuration wizard to connect the office 2010 outlook to Dynamics CRM 2015 server and get the error below (outlook client 2015 is successfully installed). All the required components
are installed on both server and client side.
Any idea?
captainsina

Hi Nico,
How is it going? :)
I am going against on-prem. Not being prompted for credentials. I can go to the services using the browser, but the outlook client fails.
I am using the same credentials on the local machine as the CRM user credentials.
Cheers.
captainsina

On New Instance computation not firing if user fails authorisation

Hi there,
In my Apex 4 application I have:
- An application-level field
- An On New Instance computation that computes the above field (no conditions or authorisations set on it)
- A public page
- A secure page to which the user I use to log in doesn't have access
If, after logging in, I go straight to the public page and then to the secure page, I get the error "user not authorised" but the application item is computed.
However, if I go straight to the secure page after logging in the application I get the error message but item is not computed! (I know that because I am displaying the item in the error page template using the format &F_FIELD.)
I thought On-New-Instance-Anything should always be executed.. but that does not seem to be the case... Or am I missing something?
How to fix this? I need the on new instance computation to always execute even if the user fails authorisation.
Thanks
Luis

- If I understand you correctly, you are suggesting to move the application computation into the login page, as a page computation?An assignment statement in a PL/SQL process that runs after the login process could work, but it would be safer to use an application-level computation that fires only after APP_USER is definitely set to the authenticated username. The condition would be something like "if :MY_USER_ID_ITEM is null and :APP_USER not in ('nobody', 'HTMLDB_PUBLIC_USER','APEX_PUBLIC_USER','ANONYMOUS')...". Then your application will work if you decide not to have a login page someday, e.g., if you switch to SSO.
If the computation point is "after submit", why do I need to worry about "per session"? It will be fired only when the user enter/re-enter the system, right?Yes.
My logout URL was constructed by page wizard. I don't see any session id there. Should I look anywhere specific?If you still have problems with an on-new instance event not firing after a logout URL results in a new session being created let me know. It may be moot for this case.
Scott

Disable Fast User Switching for RDP (NOT HIDE ENTRY POINTS!)

Windows 7 Pro.
I do virtually all my administration of 150 workstations (various domains and workgroups) remotely via RDP, and with Windows 7, I am finding more and more complications with Fast User Switching. Anything running under another user account may well
interfere with what I need to do: it may slow me down by consuming system resources, or it may, in fact, lock files that I need to remove or update.
When I log on remotely via RDP, I am notified that another user is logged on, but I have no option to log the other user off. If I then attempt to update a program that the other user has open, it may not update correctly because the other user has files
in use. I have been told I can use WMI to force another user logoff. I could probably run shutdown -i and force the user off (but, of course, that might log me off as well). However, this is not a good approach; when I run updates, I typically connect to anywhere
from five to 30 workstations simultaneously, and by the time I get logged onto all of them, I have no idea which had other users logged on and which did not. I would have to repeat on each of 30 workstations just to find out. I need a way to force-logoff the
other user during my logon process.
In the middle of running software installation, I may disconnect (NOT LOGOFF) from a workstation, take it to another site, then reconnect to the station to finish the installation. I may even just walk away from my computer for 15 minutes while updates are
running. If a non-administrative user attempts to logon, it asks me for permission, but allows the user to logon if I do not manually deny it. All non-administrators must be automatically denied logon when I am logged on.
It seems that disabling Fast User Switching would do this, but every time I have posted anywhere on the issue, I get another set of instructions on how to hide the entry points for Fast User Switching. That may work well for managing local logons
but fails miserably to protect my administrative environment.

Hi Brian,
Base on the KB article 279765
How To Use the Fast User Switching Feature in Windows XP, when not using Fast User Switching (FUS) and a non-administrator is logged on, a member of the Administrators
group can establish a remote desktop connection and has the ability to logon to the machine locally and gets a prompt to logoff previous logged on user. When an administrator is logged, any member of the Administrators group may establish a remote desktop
connection. If a non-administrator attempts to connect, you may receive the following error message:
“The user <Domain or Computer Name>\<username> is currently logged on to this computer. Only the current user or an administrator can
log on to this computer.”
In Windows 7, if the Fast User Switching is turned off, the Administrator cannot attempt to login locally. Administrator can do a Remote Desktop Session
to the Windows 7 machine and put his credentials. Once he attempts to login, he gets a prompt that looks like below.
“Once Administrator clicks on Yes, the User1’s session is disconnected.”
After logging in, Administrator can launch the Task Manager, click on “Users” tab and logoff User1. The prerequisite for the Administrator
to be able to do a Remote desktop session to the Windows 7 machine is to enable Remote Desktop services on the Windows7 machine.
In the interim, when the Administrator is logged in and has not attempted to logoff User1 yet, if User2 tries to login, the Administrator will get a
prompt that looks like below.
“If the Administrator clicks OK, User2 will be allowed to login and the Administrator’s session will be disconnected.”
This is a known issue.
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

CRM Analytics - User Authorization Not Suficient

Hi Guys,
We have implemented the CRM analytics report, however when I access the menu Sales Pro in CRM and try to open the report Closed Opportunities, I get the error : User Authorization not sufficient.
If I open the error I get the message :
Diagnosis
The user doesnot exist in the BI client or has insufficient authorizations
Procedure
Contact system administrator to verify the user is setup properly in both CRM and BI client
Procedure for System Administration
Verify that the user exist in BI client with the same user id, if not create it and assign proper authorizations as per the configuration guide.
When I run the query or the webtemplate in BW I don't have authorization problems, but I can't run from CRM.
Any suggestion about how to fix it?
Thanks in advance,
Fernando

Hi Fernando,
The report which you have implemented is doing a RFC call to BI system where some other system program is getting called which have authorization logic check for the RFC user ( or the person who is running the report). here report is terminating with error. I have face the similar issue.
generally such reports we use to schedule as a background job with batch user which have SAP ALL access but I feel in your case user who runs the report have not sufficent authorization in BI system and also you are not running report as an background job.
There aretwo tricks to findout the missing authorization which I also have used.
First option : close all the session except one in CRM and than run the report as soon as the error comes open transaction code SU53 to know the missing authorization - may be you can fail here as the authorization check fail in BI.
Second option definitely will work. Whenerror is coming double click on the mmessage to know the message detail(class and number) than again run the report in debugging mode (/H- type in address bar to activate debugging) than set breakpoint in the message and press f8( may be system will not set the break point immediately than you need to debug till the RFC calls BI system) . system will take you to the exact authorization code check where the error is coming. there you can find out the missing authorization object which is not included in the user assigned role. than can ask access team to add in the user role.
I hope this will solve your issue. Please revert with your finding.
Thanks,
Prem

CRM 2015 Installing fails: Action MicrosoftCrm.Setup.Server.BackupUpgradeDataAction Failed Could not find the file 'C:\intpub\wwwroot\web.config'.

I don't have many issues... but when I do it is usually a bad one.
I took my CRM 2013 install running on Server 2008 and did an upgrade to server 2012 R2. No issues. All updates applied. From there I run the CRM 2015 installer to run the upgrade..... Yes, running as admin, and after the "Pre Flight
Check" everything is good. From there the install starts to copy files..... I get this error.
00:16:43| Info| CrmAction execution time; BackupUpgradeDataAction; 00:00:03.0020974
00:16:43| Error| System.Exception: Action Microsoft.Crm.Setup.Server.BackupUpgradeDataAction failed. ---> System.IO.FileNotFoundException: Could not find file 'C:\inetpub\wwwroot\web.config'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite, Boolean checkHost)
at Microsoft.Crm.Setup.Server.BackupUpgradeDataAction.Do(IDictionary parameters)
at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
I am finding no references to this issue any where. Looking for suggestions. It appears that this file does not actually exist. Somewhere during the upgrade maybe it got deleted. I have put an old web.config file in this
path, rebooted everything and still get the same error.
Looking for some suggestions.
Pierre Hulsebus

Sounds like a problem with the information about where the Crm website is installed. Crm uses 2 registry values 'website' and 'websitepath' under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM. Do these look correct, and is the Crm website under c:\inetpub\wwwroot,
or elsewhere ?
The last part of the 'website' value is the website id, which you can see in IIS Manager
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

How do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?

how do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?
Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password.

You can enable / disable this option in System Preferences:
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab > Require administrator authorization to: Change networks

CRM 2015 Disable System User is not firing a plugin

Similar Messages

Maybe you are looking for