CRM ABAP development and interaction with SAP R/3

Hi Experts,
I am an ABAPer and have close to 3 years of development experience in ABAP, now i was trying to understand how exactly a CRM system is intergrated with SAP R/3 . Below are few of the basic question i have
1. How does R/3 interact with CRM, searching in the forum i just got to know its through RFC . Can anyone give me specific technical details like how R/3 and CRM interact in a real time scenario .
2. Ca any one also give me an real time development example that was done in CRM to interact with SAP R/3 and explain me the basic steps involved in it, this might give me clear picture of how developments happen in CRM and also how CRM and SAP interacts with each other .
Your quick response would be greatly appreciated .
Regard's
Sudheer V

with repect to programming , it is similar to R/3 ABAP devlopment . It all depends on scenarios:
1) For eaxmple we use BADI's to put some extra validations / additional data when you are creation order
2) unlike R/3 where we use SAP GUI trnsactions for creating orders, in CRM we have IC web client techonolgy where we can create orders through web.This is based on BSP technology. In order to add additinal fields on the screen for we use easy enhancment workbench tool(EEWB).this is something new in CRM when compared to R/3.

Similar Messages

Display and interact with a vi front panel on remote C++ app

Hello:
I am new to LV and need a little advice. I need to display a LabVIEW VI front panel in my C++ .Net application that users can interact with to view real-time spectrum data. The C++ app (client) must reside on a separate computer(s) from the VI so that the client can connect from anywhere around the world and interact with the VI.
I am not sure about the basic architecture that should accompany a good solution. We want to use TCP/IP but not DataSocket. I do not have access to Measurement Studio but I do have access to LabVIEW Professional Development System v 8.2. Can anyone provide suggestions on what I need to do in order to
1. Connect to my TCP server using my C++ client app - I have already written TCP client and server code which communicate but now I need to integrate LV
2. Get access to the VI sitting on that server
3. Send the VI front panel to the client for display
4. Allow the user to modify parameters on the front panel displayed on the C++ client, send those changes back to the server, and refresh the front panel displayed in the C++ client given the new parameters (I would like a real-time display of the spectrum to always be available)
Is this possible? Has anyone done this using C++ .NET in VS2005? Are there examples I can mimic or references that will help direct me? I have searched and searched through NI's help and found a lot of good stuff but I'm still feeling confused about the best way to utilize LV.
Thank you in advance!

One more question ... what if I could use Measurement Studio? The documentation seems to indicate that it's easy to create network applications and therefore it would be easy for me to re-create our VI's front panel using Measurement Studio components in my C++ app and then simply connect those components to the networked hardware (TCP/IP or DataSocket) that could be located anywhere in the world.
Depending on what components you are using in your LabVIEW panel, it is probably pretty easy to build a Measurment Studio application to look like a LV panel.
Given that, you could use network shared variables to move data across the network, no TCP programming necessary -- I think that this is pretty easy to do, but I don't know the specifics about variable programming in that environment. Also, you will probably need to add some smarts to the server side to make sure that it is reading to and writing from variables in an appropriate manner.
Question: why can't you just use LabVIEW for the client application also?

CRM ABAP Development aproach

Hi Experts,
Can any body tell me the difference in the approachs of development between CRM ABAP and ABAP.
or only the CRM ABAP development approach.
jaffer vali shaik

Hi,
As far as ABAP is concerned, its same in R/3 and in CRM. But in CRM, its more oriented towards OOABAP. For example, BADI, Model access class of PCUI all are oriented towards OOABAP.
Regards,
Karthik.

Can I interact with SAP Tech Support Team over phone?

Hi,
I and my architect in my company willing to interact with SAP Tech Support Team over phone (i.e. Like to setup a Call with them). we have bought a license with us for Crystal Report 2008. My architect has few queries to be clarified and willing to interact with them.
Is this possible? If so can you please provide the contact number for the same.
Thanks & Regards,
Mani G.S.

Hi Mani,
If you don't have a support contract to create a case in [Service Market Place|http://service.sap.com/support] then you can purchase a single case from this [link|http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=Tj14uQoHArEAAEctJGsAAAAI&rests=1312651449029]
Don
PS - it's a holiday in North America today so if you do call it may take a day to get back to you.

Is it possible to connect an iPad to a SmartBoard and interact with the iPad on the SmartBoard, like you do on a computer with the Smart-software Notebook on it?

Is it possible to connect an iPad to a SmartBoard and interact with the iPad on the SmartBoard, like you do on a computer with the Smart-software Notebook on it?

You can purchase an adapter from apple that uses the monitor cable from the projector, its the same one that is probably connecting either your laptop or school workstation. On the projector control you might need to refresh the source.

Development and marketing of SAP EP solutions - any licenses required?

Hi
Not sure which forum to post this in, so - maybe Coffee Corner is a good start
My question is about the licensing required to development and marketing small add-ons / extensions for SAP Enterprise Portal.
Is it possible for the individual developer to develop and market small add-ons for EP in Java WDP, making use of a trail EP installation?
Do you need a special license for this (to develop commercial products)?
Maybe like a [SAP NetWeaver Developer Subscription|https://www.sdn.sap.com/irj/scn/subscriptions/development?refer=subscriptionslandingpage], or the [SAP Composition Subscription|https://www.sdn.sap.com/irj/scn/subscriptions/composition?refer=subscriptionslandingpage]?
Reading up on the [Subscriptions FAQ|https://www.sdn.sap.com/irj/scn/subscriptions/software-faq#q-4-5], and it is not very clear:
Can I use my developed add-ons, extensions, developments, or modifications in a production environment?
In order to run your add-ons, extensions, developments, or modifications in a production environment, you need to purchase the applicable license from SAP. SAP customers or partners who already have an applicable license can use SAP NetWeaver in a production environment.
So-
"SAP customers or partners who already have an applicable license can use SAP NetWeaver in a production environment"
I'm not expecting to run the SAP NetWeaver Developer/Trail version you get with the subscription in a production environment - the question is would any prospective buyers of your developed add-ons be able to run these in their (fully licensed) NetWeaver / EP production environments?
(I feel this FAQ is not answering its own question correctly).
Purchasing a full EP license is a little out of my budget, and even the two developer subscriptions mentioned above are only available in Germany & the USA (and I reside in neither of which).
Any suggestions from the guys & girls of the Coffee Corner?
Thanks!

I am not a lawyer, but my interpretation of this is that the subscription systems are for "sneak previews" of releases and experimenting with the software to see whether you like it or not...
So this means that if you do development work on it and want to use it in a production environment, you will need a full license to run the software productively first, and then add your development to that licensed landscape.
This is a different topic to licensing your own development. For this you would need to become a solution partner and request your own namsepace in SAP, and then license it as optional software via service.sap.com.
For the "little individual" like you and me, this is not really an option IMO.
In some special cases, I have seen external coding included in the standard system, and you get a special mention for it sometimes in the coding comments.
I was thinking about the same as well because I am busy experimenting with a tool for making dual maintenance of roles during upgrades easier and know a few customers who would be interested in such a tool (possibly controlled centrally by a SolMan CTS+ with after import rule sets).
Being ABAP, I think I could try to sell it once or maybe twice... but after that I expect it would be "in the wild" and see others posting it here on SDN as well...
On the otherhand, ABAP is more of a hobby for me and I am not a guru at it like many others here. If I were to post it here myself... then I could benefit from other contributions to improving it and making it more robust - like an open source project.
Just some thoughts,
Julius

ABAP Development and "End User License"

Hi all,
I'm happy to join to SDN!!!
I newbe in the forum, and therefore I don't know if I post in the right section.
I'm a Netweaver Architect and ABAP Developer.
In the past I worked as java developer, and with other programming languages.
I have a doubt: is it possible (or forbidden by SAP AG??) to develop an ABAP package (which, obiousvly, contains Z / Y Abap objects) and apply an "End User License" on it, i.e. on the ABAP code written? (I mean that the copryrights are mine, and I give an "End User License" to my customers (that buy the license), in order to get and run my abap code). I would avoid to sell my Abap package, but, if possibile, I would only give it according a "Use License".
May I do this thing without any problems, or have I to consider other aspects, like ask to SAP to reserve a namespace, or obtain SAP Netweaver certification for my ABAP solution, or other things?
(Infact the "End User License" that I mean is different from "SAP End User License")
Please, let me know your opinion and how or who could solve my matter.
Many thanks to all.
Best Regards,
Albert

Hello,
Can you point us there in this thread please?
Kind regards
Ash Thomas
Sap Consultant
<a href=http://www.ashpeople.com>Sap Consultancy</a>
<a href=http://www.ashpeople.com>www.ashpeople.com</a>

Help about the last SRM version and interaction with suppliers

Hello, I need the confirm that the last SAP SRM versione is the 7.0. Which are the differences between 5.0 and 7.0? Do you have materials about the interaction with suppliers for bids? Thank you!
Dany

Hi,
There are a lot of differences between the SRM 5.0 and SRM 7.0.regarding the Bidding Scenario.
Infact SRM 7.0 is released with Public Procurement service(PPS)
The main differences
SRM 5.0 -tender fees payment and EMD (Earnest Money deposit) is thro' Development
SRM 7.0 -Tender fess -Payment can be made in SRM thro'Payment Gateway
- EMD Fees can also be paid in the SRM 7.0 which is Standard Functionality..
There are lot of differnce
Just Wait for a day or two I will send the difference to your Business Id
Regards
G.Ganesh Kumar

Can i use flash for ui and interact with c++ builder for the rest

i know flash can be used in c# in visual studio but i dont remember a thing of this interaction.
is it possible to interact with c++ builder and how?
the scenario is simple
use flash for UI (showing-viewing data) maybe for a kiosk or something without mouse simply with touch input,
use c++ builder for the rest , database connection data proccessing etc
any info will be greatly appreciated
thanks

I would advise proper punctuation and grammar on a public forum, but to answer your questions, yes, yes you can! Flash can be used to produce any commercial imagery or animations for the purpose of making profit, as long as you have a valid license you purchased from Adobe. You bought it, you can use it for whatever you want.
By "book", I assume you mean the "tutorial" book series made by Adobe? If so, the name of the series is "Classroom in a Book", there's one for each versions of Flash. Personally it hasn't been of much use and I would advise simply practicing by yourself and getting familiar with the tools. Look for online tutorials and publicly available projects and see how they work.

Retire Oracle Designer development and continue with just using Forms 11

Hi,
The company I am working for is taking over responsibility for an Oracle Designer 10 application.
Due to Oracle Designer is an outdated development environment we are looking for potential solutions how to get rid of Designer without completely redeveloping or replacing the application.
One options we thought about is to switch off Designer and only continuing to use Oracle Forms 11.
Do anyone of you have experience in this area which you would like to share?
Best regards,
Marco

There are a lot of case generated (CG$) trigger and procedures used in the Forms. For us the code seems to be very complex and hard to read.
But, also some of them seems to be never used or it is just the statement "null" in it.
We thought about SQL Developer Data Modeler to capture most of the Designer stuff. But still there is the technical documentation that is not fully supported by SDDM. Did anyone migrate these Designer documentation to an other tool? If yes, to which one and how? We tried the SDDM Report functionality to capture some of the documentation, but also these reports do not contain everything that Designer could provide.
There are also "Preference Sets" used in Designer and we are wondering how to migrate these to Forms Builder. Did anyone migrate these preference sets to Forms Builder in the past and has some experiences/examples/recommendations about that? We thought about one "global" form that could contain these preference sets and then inherit them.
There are also the Functional Hirarchie Diagrams in Designer, could they migrated to Forms or SDDM in any way? Or do we need to maintain these diagrams manually in a tool like Word or Visio?
If we could capture all the things mentioned above, we would like to continue just with Oracle Forms Builder 11gR2 in combination with other tools like SQL Developer and Data Modeler and if no other solution could be find out with some manual maintained documents.
For all recommendations and tips we are very interested and we would thank you all very much!

Available now: New Business Transformation Study for Aurubis on the 7 month implementation and success with SAP Commodity Risk Management

We just published a Business Transformation Study with Aurubis AG, the world’s leading integrated copper producer, on how SAP Commodity Risk Management solution helps them to hedge commodity price risks with the highest accuracy and integration and to meet stringent compliance regulations like EMIR with lowest risk, effort, and cost.
With SAP Commodity Risk Management, all business processes related to commodity derivatives including the settlement, accounting and payment processes are now integrated and generated within the existing SAP ERP system. Please read the BTS here .

Thanks Samuli.
You're right, it seems BAdI HRESS_NWBC_MENU_EXT will work. I think I didn't make myself very clear as I didn't say that launchpad menu will no longer be used with NWBC since we will use the left side navigation, much user friendly and quicker to access to.
Reading SAP documentation it seems this BAdI (available from EHP7+) will solve my issue.
Thanks for the hint.
Do you see any blocking point from moving SAP Portal to SAP NWBC for HTML even with 12000+ users?
Thanks again.
Best Regards,
AS

Default Sites and subscriptions with SAP installation package

Hello,
Does anyone knw what are the default Sites and subscriptions provided with SAP installation package - i.e. in client 000, 001.
Rgds
Priyanka

You can go to Tcode SMOEAC and check.
Pls reward points if helpful.
PB

Import, and interact with, Flash 8 movies in Flex3.

Hey gang,
I have a Flash CS3 App built with ActionScript 2.0 that imports Flash 8 SWFs. Those Flash 8 SWFs are each comprised of hundreds of movieclips.
I'm rebuilding the Flash CS3 App in Flex 3, and even though I can import the Flash 8 SWFs but can't interact with them (change their color, change their sizes, duplicate them, etc).
Before you tell me to convert all the Flash 8 SWFs to CS3/ActionScript 3.0 know that there are 700+ of them.
Tips? Tricks? Ideas?
A sample SWF (and source FLA) I'm trying to import into Flex 3 can be found here:
http://www.bensmash.net/sample/SM2.swf
http://www.bensmash.net/sample/SM2.fla
I appreciate your help!
-Benjamin

ejl_70 sorry but is true you need flash cs3 to save in flash 8 in flash cs4 your only save as to flash cs3

Video grabbing and interaction with windows

hi, few questions...
is there any way to work with the usb camera or any video device, even if it does not have a api/sdk ... something like Windows Image Acquisition ??
can i write code that interacte with windows events ?? i mean a program that in case of click on the desktop will do something ??
it would really really help
Jaimon

I'd think that Java is not exactly the language you need... I'm sure you can do much more in VC++. Java's point is having as little to do with the OS as possible; you won't get around using native code.

How to design and develop Cost center with SAP BPC 5.1 ?

Hi all,
Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
Thanks,
Sandy

Hi Sandeep,
1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
regards
shyam

CRM ABAP development and interaction with SAP R/3

Similar Messages

Maybe you are looking for