CRM business role - user mapping initial load

Hi,
I'm tyring to initial load the data from the CRM systems into IDM. I'm able to get all data of the users expect their business role mapping(parameter in CRM).
in the read pass of the user from the abap initial load , the attribute for the parameter is as follows,
                    Target                                                                             Source
sap%$rep.$NAME%Parameter1:Info:VARCHAR:255|                        parameter1
but no data is stored in the parameter1 table though the user has some parameter mapped in the CRM system
Can anyone plz help to load this user-business role mapping details.
Thanks in Advance.
Regards,
Pricy

Hello Pricy,
can you just give me some hints on what you are trying to do exactly?
My assumptions:
- CRM business role is stored as user parameter in ABAP SU01 user data, right?
- you want to read all the ABAP user data from your CRM system INCLUDING the user parameter data from ABAP SU01 user data, right?
If that is the case at least the loading part should work pretty fine. I just tried this on my local system and had no issues, all user parameters of my existing ABAP users where loaded into one temporary table.
-> Pass: ReadABAPUsers -> table "sap%$rep.$NAME%Parameter1:Info:VARCHAR:255|"
Did you find this temp table created on your database correctly? My table is there and is called "sapT01_001Parameter1" (where my repository is named T01_001) and it contains all the existing user parameters.
What exactly is your issue?
Regards,
René

Similar Messages

Unable to find User,Roles,User Mapping under UserAdministra Role in Portals

Hi All,
I installed SAP Netweaver sneak preview 2004 full java edition with sp9
version successfully but am unable to find the sub role User Mapping,User,Roles under
User Administartion Role in Portals.
only Identity management, Import, Activity reports are showned.
Can any one suggest me where i have to get this options?
Thanks & Regards
Phanikumar

Hi All,
Hi All,
I got the solution.
In the User Administration --> Identity Management, search the user or group or role then click on the result list item then you will get the details.
There you can find the following TABs for user/group/role.
1. General Information
2. Account Information
3. Contact Information
4. Additional Information
5. Assigned Roles
6. Assigned Groups
7. User Mapping for System Access
User Mapping is one of the TAB(7th). Click on that User Mapping TAB
regds
phanikumar

Users assigned to CRM Business Roles

Is there a report that can show what users are assigned to what Web UI business roles. We have business roles assigned to positions and not PFCG roles. If not, what table to show business roles assigned to positions numbers so I can atleast query names on positions that have specific business roles.
Thank You,
Alex

Hi Alex,
Normally the AGR_USERs table through SE16 can give you this output
in AGR_USERS table go and set the ORG_FLAG and COL_FLAG to get the output, you could also do this just for roles
AGR tables.
also if you have a proper naming convention please search by "UIU" string most of the WEBUI roles supplied by SAP has this key word "UIU"
Also you can go through SPRO ("UI Framework") to see the default business roles assigned to the "UIU" roles supplied by SAP.

CRM business role

Hi all,
how to create business role and how to assign 5 business roles to an organizational unit.

Hi pramela
Follow the below SPRO path in CRM system
Customer Relationship Management->UI Framework->Business Roles.
Take any standard business role (say for example SALESPRO) and copy the business role change accordingly as per your requirement.
once this is changed go to transaction PPOMA_CRM (Organization unit maintainance) from here search for relevant organizationunit under the organization unit you will found the positions under the positions you will see the Assignment of either users or Business partners as Central persons.
Here you have to remember two points either you can assign ROLE to Organization unit or Position. If you assign it at organization unit level the sub organization units and positons will get that assigned role.
if you assign at position level , the users only assigned to that position will get that rolee.
How to assign the role. Doube click on any organization unit or position that you want to assign the role, From the menu path
GOTO->DETAILOBJECT->ENHANCEDOBJECTDESCRIPTION after going here you will see Maintain object screen under ACTIVE TAB search(scroll) for the infotype with name BUSINESS ROLE , select the business role and click on create button (on top you will see the create button) in the create screen specify your role.
if you assign five users to the same position then you have to carry this only once, if they are assigned to several positions under differnt organization units you have to assign those many times.
Thanks & Regards
raj

CRM 5.0 - Error during Initial Load

Hi,
We have connected CRM 5.0 with ECC 5.0.
During initial load we are getting error in the outbound queue of ECC system as 'Name or Password incorrect (Repeat Logon)'.
Any idea, why is this happening. We have double checked the user id and password entered in SM59 is correct.
Thanks in advance,
Amit

Hi Michael,
Yes, I had checked on both the systems.
Anyways, the problem is now solved, it seems the BASIS team did some goofup while configuring the RFC destinations. It is working now.
Thanks for your help.
Cheers,
Amit

Scheduled automatic upload of roles/user mapping from R/3 to EP6

EP6.0 offers a nice tool to upload roles together with the user mapping from an R/3 backend system to the portal. This works very well, but in an environment where the user mapping happens on the backend system this manual process has to be repeated to keep the user mapping up to date.
It would be very useful if this process could run in batch mode and could be scheduled. Does anyone has a solution for this problem?
The way the portal user administration is designed works maybe very good for small companies, but for large companies with many users a batch upload tool is really needed!
People from SAP have told me that they are thinking about such a tool, but the pressure from the customers is not high enough to put it on their project list. So maybe we can unite forces to increase pressure on SAP project management.

Dear Krishna,
There are a few solutions for this problem and we are investigating some of them now:
- you can use an LDAP server. Transfer users and the groups to which they belong from the R3 system to LDAP. The groups correspond to the roles the users have. The portal can use the groups on the LDAP server. The portal roles have to be attached to the groups and not to the users.
- we are also thinking about writing a JAVA program that automizes the manual role upload that SAP delivers in the portal. The KM part of the portal contains a scheduler which can be used to schedule the upload of uesr mappings from R3 to the portal.
- you can also make an ABAP web service that is called from a program on the portal to transfer the usermapping. The program makes use of the UME API.
- Or you can make an ABAP program on R3 that calls a JAVA program on the portal that makes use of the UME API to store the user mapping on the portal.
your iview question:
Maybe you can change the default setting for the preferred GUI in the master iview that is used for the creation of the iviews. When you create a new iview the portal creates a delta link based on the master iview., so when you change the master iview all new created iview based on the master iview will have the correct setting immediately.
Best regards,
Johan

CRM2007 How to add a Web Dynpro ABAP application to a CRM business role

I am investigating CRM2007 UI framework and I cannot seem to find a way to add a custom made Web Dynpro ABAP Application (created in CRM 4.0) to a business role, or how to add a custom transaction created in classic ABAP (transaction created via se93, progam created via se38). Whatever I do, I only see BSP components. I am using transaction BSP_WD_CMPWB.
Next to this it seems you can add/integrate Visual Composer applications to (there is an entry in spro called "integration of the visual composer in BI"). However, I presume we first have to meet the requirements for the portal integration in SAP CRM 2007 as described in spro. If somebody knows how this works, that would be great!
kind regards
Angelique Heutinck

Hello Angelique,
It should be possible to call web dynpro applications from the L-shape menu of CRM UI (check transaction CRMC_UI_NBLINKS). As for the old GUI transactions, you can embedd them also via transaction launcher using CRMC_UI_NBLINKS (search for "transaction launcher" in this forum, there is plenty of information on it).
Best Regards,
Yevgen
Edited by: Yevgen Trukhin on Jun 19, 2008 11:53 AM

Getting error in IC agent business role while loading components.

The user has been allowed and access to all business role.user are using all business roles but when user click on the IC agent business role the following error arise.
Cannot display view CRMCMP_BPIDENT/BuPaMultipleLayoutVS of UI Component CRMCMP_BPIDENT
An exception has occurredException Class CX_CRM_GENIL_GENERAL_ERROR - Component set CRMIC_DEFAULT cannot be loaded with BP_APPL+EMPTY+IC_ACCT_ID since multiple object definitions exist for component SO2
Method: CL_CRM_GENIL_INTERNAL_MODEL=>LOAD_COMPONENT_SET
Source Text Row: 124
Initialization of view CRMCMP_BPIDENT/BuPaMultipleLayoutVS of UI Component CRMCMP_BPIDENT failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BPConfirmedPartners.MainWindow in component CRMCMP_BPIDENT could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view CRMCMP_BPIDENT/BuPaMainVS of UI Component CRMCMP_BPIDENT
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BPConfirmedPartners.MainWindow in component CRMCMP_BPIDENT could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRMCMP_BPIDENT/BuPaMainVS of UI Component CRMCMP_BPIDENT failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRMCMP_BPIDENT/BuPaMultipleLayoutVS in component CRMCMP_BPIDENT could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view MainWindow of UI Component CRMCMP_BPIDENT
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRMCMP_BPIDENT/BuPaMultipleLayoutVS in component CRMCMP_BPIDENT could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view MainWindow of UI Component CRMCMP_BPIDENT failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRMCMP_BPIDENT/BuPaMainVS in component CRMCMP_BPIDENT could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BPIDENT.MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view Root.htm of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
An error occurred during initialization of the application
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
I could not able to diagnose the error from where it is coming and I goggled lot but did not find anything about the above cited issue .
if any of you can help me to solve this soon it will be highly appreciated .

Hi,
I am not sure if this appies here. You might check
SPRO->CRM->crm cross-application components->
Generic interaction Layer/Object Layer ->
component-specific settings->
define simple objects
For these objects 2 rules apply:
1. 'search object name' can only be used once.
2. 'search object name' should not have the same name as any 'object
name'.
Do you have any entries, which break these rules?
If it is related to component enhancement, note 1122248 might help.
Best Regards,
Sigrid

How many standard business roles are there in CRM

Hi Experts,
I had a question in one of my exam.. please answer it
question:- How many standard business roles are there in CRM?
options were:- 2,3,4,5
I think the options does not have the right answer , upto my knowledge it is more than 5. please help me with the appropriate answer
Thanks
Rahul Mathur

Hi,
There are approximately 40 standard business roles available in the latest version ehp3.
As the version changes the business roles increases. Initially there are only 3 std business roles..
1.sales pro 2. marketing pro 3. service pro and along with IC Agent.
Each BR above is loaded with huge no of transactions even though our aim is to for ex: create sales order...we use sales pro but all the sales related operations(transactions) are being loaded in to the system so along with the version improvements/releases SAP have divided each of these std BR as much as they can and thus the no of operations or transactions per BR is decreasing with each release....
Thanks & Regards,
Malleswar.

Business role of user

Hi,
How do we find what business role is associated with the user in crm sap 2007?
Regards
Shilpi

Hi Shilpi,
Do the following :
1) Generate PFCG Authorization Profile.
Goto Transaction PFCG ->Select the role (example: BP_SLS_EMPLOYEE)->click on CopyAs -> Change the name to Z_BP_SLS_EMPLOYEE -> select "authorizations" tab page -> Generate Profile (click on button next to Profile Name -> display authorizations screen will be displayed -> click Generate Profile (shift+F5) button next to open button) -> Save -> accept transport request (if any))
2) Assign PFCG Authorization Profile to User
We can achieve this by 2 ways
a) Goto transaction SU01->enter user name (ex: SAPUSER01)-> select 'Roles' tab page-> enter PFCG Role (example: Z_BP_SLS_EMPLOYEE)-> select 'Profiles' tab page -> enter SAP_ALL and SAP_NEW -> Save
OR
b) Goto transaction PFCG-> select 'Users' tab page -> enter user name (example: SAPUSER01) -> Save
3) Assign User to the Business Partner (Employee)
Goto transaction BP -> create a new BP in role employee or open/display the existing BP in role employee (example: Shilpi) -> select role = employee -> select 'Identification' tab page -> enter User name (example: SAPUSER01) -> Save -> accept transport request (if any)
4) Assign Employee to the Organization Unit
Select the Organization unit and assign the BP employee to the position (position = sales employee) -> Save
5) Create Business Role
SPRO->Img->CRM->Business Roles->Define Business Role-> select 'SALESPRO' (business role)->click on CopyAs->Change the name to ZSALESPRO->only change PFCG Role = Z_BP_SLS_EMPLOYEE->enter->click on skip button (ignore any warnings)->Save-> accept transport request (if any)
6) Assign Business Role to the Position in Org. Model
SPRO->Img->CRM->Business Roles->Define Organization Assignment->select the position (example: sales employee)->double-click on position (to make sure that you have select position)-> click on 'Goto' -> click on 'Detail Object' -> click on 'Enhanced Object Description' -> select 'Active' tab page -> highlight 'Business Role' line -> click on create/change button to add the business role -> enter Business Role = ZSALESPRO -> save -> accept transport request (if any)
7) Refresh your Internet Browser
Tools-> Internet Options -> Click on delete files button -> select delete all offline content check box -> click on OK button
Logon to CRM WEB UI with the User (SAPUSER01)...
Please note that when ever you have saved any configuration in CRM, you have to come out of that sequence to reflect the changes made.
If this solved your problem, please award the points...
Cheers,
Peter J.

GRC 10 - Business role, no role owner but associated role have owner....

Dear All,
In GRC 5.3 we perform the following mapping:
Business Role A mapped with (no owner)
- Technical Role 1 (from ECC with Owner1)
- Technical Role 2 (from CRM with Owner2)
- Technical Role 3 (from HR with Ownwer3)
IN GRC 5.3 we have a business role mapped with multiple child role(techinical role) from other system.
GRC 5.3 request is able to close and provisioned as it can see owners from child role.
Now in GRC 10, we did the same. Create a business role, then mapped the child role (technical role). Unfortunately, when manager approves the workflow reroute to "NO OWNER DETOUR PATH" because it cannot see the technical role owner.
Seems like GRC 10 is only looking at business role owner. We are unable to add Owner1, Owner2, Owner3 to the business role because when one of the owner approves, it will provision all the technical roles. We might have owners who will reject their role.
Please advice.
Jacky

Hi Mustafa,
you can use end user personalization to avoid a role owner to approve roles for himself. Define a dedicated EUP for role owner stage and restrict via "Approve/Reject Own Requests" like shown below:
Does this answer your question?
Regards,
Alessandro

Backend Authentication pop ups in user mapping

We are having an external facing portal for our client.
System specifications: EP 7.0 SPS 9
Services provided on our portal are the BSP applications from CRM System.
We have performed SSO with CRM system with User Mapping for "Anonymous Group".
When we access the portal in standard form as
http://<host>:<port>/irj/portal/anonymous
all applications (BSP) run properly without asking for any authentication pop-ups. This scenario works fine for all users of anonymous group.
Now we have second group of users which are Employees of portal who actually log into the portal with their User ID and Password. These are the users who have access to some BSP applications which anonymous user can't access (as per clients requirement).
For this group we use the same system alias as we use for Anonymous, and applications are also in the same Namespace. For this group we follow the separate user mapping.
Now when we log on to the portal with this user and try to access the application, a pop-up window comes and asks for the authentication for the CRM system even though user mapping is maintained at group level.
At this stage if we cancel the popup we get following error information.
Logon failed
What has happened?
Call of URL http://<host>:<port>/sap/bc/bsp/sap/ztt1_xbsp_bre/start_exit terminated due to error in logon data.
Note
Logon performed in system MCD .
Logon performed for client 200, user HOSPITAL , and language EN.
What can I do?
Check that you have entered the client, user, and password correctly.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:200-l:E-T:2-C:3-U:34-P:34-L:3
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
This error indicates that the login to CRM system is successful but application is not loaded. Now if we click on the link for same application again (second time), the application does not throw any pop-up and gets loaded properly.
Concluding we get this popup only for the first time when we try to access any of the CRM-BSP application, second time (in same session) it works fine.
This is the issue we are facing. Needed help for the same.
Thanks in Advance
Message was edited by: Kedar Kulakrni
Kedar Kulkarni

lets know what is ur issue..

Error while Initial load

Hi Forum,
Iam doing Middleware setup for downloading customer master from R/3 to CRM.Iam trying to do initial load of customizing objects viz.,DNL_CUST_ACGRPB,DNL_CUST_ADDR,
DNL_CUST_KTOKD,DNL_CUST_TVKN,DNL_CUST_TVLS,DNL_CUST_TVPV... which are to be loaded before doing initial load of CUSTOMER_MAIN.
while doing initial load of customizing objects iam getting the below mentioned error
001 No generation performed. Call transaction GN_START.
002 Due to system errors the Load is prohibited (check transaction MW_CHECK)!
-when I do GN_START
"A job is already scheduled periodically.
Clicking on 'Continue' will create another job
that starts immediately.
Do you want to continue?" message is displayed
and I have sheduled it.
But in SMWP transaction I can see in
BDoc Types: Generation of other runtime objects
Not generated / generated with errors 2 entries
 31.08.2006 05:33:50
and the objects with errors are
POT_LISTWRITE
SPE_DDIC_WRITE
-In transaction MW_CHECK, system displays message as No generation performed. Call transaction GN_START.
when I regenerate these objects(generated with errors)from the context menu I find no difference.
I have also referred to the Note :637836 and 661067 which also suggests to run few reports and GN_START but inspite of doing all the corretion parameters in the note Iam still unable to come out of the situation.
Please Guide
Thanks in Advance
Shridhar.
Message was edited by: Shridhar Deshpande

Hi Rahul,
Thanks for the reply.I checked in transaction MW_CHECK and the system throws the message as
No generation performed. Call transaction GN_START.
In the long text the below message is available
No generation performed. Call transaction GN_START.
Message no. SMW_GEN_KERNEL005
Diagnosis
An upgrade was performed.
System response
The Middleware is stopped because MW objects must be generated.
Procedure
Excecute transaction GN_START.
If GN_START is executed,I dont find any change.
I also checked in smq2in CRM and I found the status of the queue as below
 CL Queue Name Entries Status Date
200 CSABUPA0000000042 5 SYSFAIL 31.08.2006 09:54:05 31.08.2006 09:54:11
Thanks
Shridhar
Message was edited by: Shridhar Deshpande

Z Creation of Business Role

Hi,
I am new in CRM and i want to create a business role for a one is for custmoer and one for Call center Agent.
i know some tcode like CRM_UI_Profile and PFCG but dont know how to create it.
Can you explain me in Step by step manner or any privious Forums or link.
I have searched privious forums but i did'nt get expected.
jim

Hi Jim,
Yes you can create a Z Buisness Role in the crmc_ui_profile (img activity>>CRM>>Business Roles>>Define Business Role).
A business Role is made up of several things namely -
1.Role Config Key : You can create a new or use existing ones.
2.Navigation Br Profile
3. Layout Profile
4.Technical Profile
5.PFCG Role ID
Navigation Bar profile is specific to different business roles. It defines what all links you see on the left hand navigation pane on Web UI. E.g. a marketing professional would see different links than a sales pro or a call center agent.
Similarly you can define other profiles or the use the default profile.You can create a pfcg role id in t-code pfcg and assign it your business role.
Jim, what would be best is to copy a standard role, e.g IC_AGENT and then customize it according to your needs and change the config key, nav bar, layout, and technical profile as per your requirements.
Thanks and Regards
Varun Taneja

PFCG Field in Business Roles

Hi All,
Could anyone tell me what is the importance of PFCG Role ID field while creating a Business Role?
(IMG>CRM>Business Role-->Define Business Role).
Reply awaited.
Regards,
Sri..

Dear Sri,
this is regarding authorizations;
The authorization concept is, that the PFCG role contains exactly the
authorizations needed for a particular business role.
The authorizations are determined using the settings in the
business role customizing, the CRMD_UI_ROLE_PREPARE report and
the su22 (su24 at customer site) trace.
There is not strict connection between the business role and the
PFCG role. You could even assign a dummy PFCG role to the business
role and put all needed authorizations into on other pfcg role.
Regards, Gerhard

CRM business role - user mapping initial load

Similar Messages

Maybe you are looking for