CRM : I want a function module which would give me the Sales Org Short

I have to fetch Sales Organisation Short from the Data base to check whether it is updated or not and i also need the old value in CRMD_ORDER. I need a function module that would get me the Sales Ogansiation Short for the Old Sales Organisation i have. Urgent Please....

this kind of an authentication is not possible with the linksys SOHO products...it could be possible with the enterprise level products..
however, you can set up a wireless security on the wireless access point and this requires every user to enter the passcode to connect to the network...here , one problem could be that once connected to the network , the password will be saved on the user's computer...they need not enter the password again...
the set up you can have is like
modem -> a wired router -> WAP54GPE 
the next WAP54GPE will be configured in wireless repeater mode...the number of WAPs will depend on the kinda range you want...the range of a WAP54GPE is around 300 fts....

Similar Messages

  • Any Function Module which will give user id or position

    Hello Friends,
       is there any standard function module which will give the attribute position id or user name if i pass the 'attribute id as CNT' with value of the CNT. i know there is a standard function module 'BBP_READ_ATTRIBUTES'. but this FM will give the value of the attribute id if i pass the user id and attribute id but i want user id or position when i pass attribute id and value.
    john.

    Hi,
    See this related thread:
    Re: Get all users given a specific product category
    You cna use the similar approach to find for the attribte cost centre.
    BR,
    Disha.

  • Prog/Function Module which call during pressing the button "Pattern" inSE38

    Dear Guru,
    I have encountered an issue : issue is like that I want the name of the function module/ program which invokes as soon as we press the "Pattern" Button in Application tool bar of ABAP se38 editor.
    Please help.
    Thanks & regards
    Saifur Rahaman

    Dear Guru,
    I have Encountered an Issue.
    The Scenario Is like this :-
    As soon as we create a new prog using SE38 it automatically generates a standard pattern like below :
    *& Report  ZSR_TEST_05
    REPORT  ZSR_TEST_05.
    But the requirment is like this as soon as we create a new prog using SE38 it automatically it should generate the The Pattern like below :--
    *& Project            :
    *& Program Name       :
    *& Transaction Code   :
    *& Program Type       :
    *& Functional Domain  :
    *& Technical Coding   :
    *& Functional Guidance:
    *& Coding Review      :
    *& Spec. Review       :
    *& Program Description:
    REPORT  ZSR_TEST_05.
    After going through sdn documentation i have identified that using dynamic pattern we can create this and call that dynamic pattern using PATTERN button in ABAP editor.
    But the thing we require as soon as we generate the prog thr. SE38 atomatically all the details must generate before the report <report_name>.
    For achieving thins what i have to do ... please show me some path to achieve this
    Duplicate locked
    Edited by: Rob Burbank on Oct 31, 2009 3:26 PM

  • Function module or BAPI to get the sales order details.

    Hi,
    Can any one revert back with the FM or BAPI to get the sales order details.
    I tried using BS01_SALESORDER_GETDETAIL, in my driver program of smartform but when i execute the form using VA03 -> Sales Document -> Issue output to -> Print preview, I am getting the required output.
    if i see the print preview in the overview of the sales order (enter sales order and press enter), the above specified FM is not populating any data.
    Thanks,
    Prathap

    Hi Prathap,
    The above specified FM BAPISDORDER_GETDETAILEDLIST should work. As you need the item conditions,
    Fill the I_BAPI_VIEW with header = 'X', item = 'X' and sdcond = 'X'.
    Fill the SALES_DOCUMENTS-vbeln = sales order number.
    Regards,
    Shylaja

  • Function module which could calculate the previous month's start date.....

    hi,
    I want a function module which could calculate the previous month's start date and end date...
    Say todays date is  like 29.05.2007(start date) it should return
    01.04.2007 and 30.04.2007...
    IS there any FM for this ... or how to go about this scenario ???
    thanks in advance
    samm

    See the below Logic :
    DATA :g_date(2) TYPE n,           " Date
          g_month(2) TYPE n,          " Month
          g_year(4) TYPE n ,          " Year
          g_bill_low(10) TYPE n,       " From date
          g_bill_high(10) TYPE n,      " To date
          g_month1(2) TYPE n,         " Month
          g_year1(4) TYPE n,          " Year
          g_date1(2) TYPE n,          " Date
          g_year2(4) TYPE n,          " Year
          g_datum LIKE sy-datum.      " System date
    RANGES : r_bdate  FOR vbrk-fkdat.             " Billing date
      g_datum = p_date + 10.
      g_month = g_datum+4(2).
      g_year = g_datum+0(4).
      IF g_month = 1.
        g_year = g_year - 1.
        g_month = 12.
        g_date = 1.
      ELSE.
        g_month = g_month - 1.
        g_date = 1.
      ENDIF.
    Passing the date to billing date-low
      CONCATENATE  g_year g_month g_date  INTO g_bill_low.
      r_bdate-low = g_bill_low.
      r_bdate-sign = 'I'.
      r_bdate-option = 'BT'.
      g_month1 = g_datum+4(2).
      g_year1 = g_datum+0(4).
      IF g_month1 = 1.
        g_year1 = g_year1 - 1.
        g_month1 = 12.
      ELSE.
        g_month1 = g_month1 - 1.
      ENDIF.
      CASE g_month1.
        WHEN 1.g_date1 = '31'.
        WHEN 3.g_date1 = '31'.
        WHEN 4.g_date1 = '30'.
        WHEN 5.g_date1 =  '31'.
        WHEN 6.g_date1 = '30'.
        WHEN 7.g_date1 = '31'.
        WHEN 8.g_date1 = '31'.
        WHEN 9.g_date1 = '30'.
        WHEN 10.g_date1 = '31'.
        WHEN 11.g_date1 = '30'.
        WHEN 12.g_date1 = '31'.
      ENDCASE.
      g_year2 = g_year1.
      IF g_month1 = 2.
        g_year2 = g_year2 MOD 4 .
        IF g_year2 = 0.
          g_date1 = 29.
        ELSE.
          g_date1 = 28.
        ENDIF.
      ENDIF.
    Passing the date to billing date-high
      CONCATENATE  g_year1  g_month1  g_date1 INTO g_bill_high.
      r_bdate-high = g_bill_high.
      APPEND r_bdate.
    Reward Points if it is helpful
    Thanks
    Seshu

  • Functional Module which can send FAX

    Hi All,
    Can you please suggest a function module which we can use to send fax. We wanted to fax the output list genrated by the program.
    Regards,
    Vidya.

    The following program shows you how to send a fax from within ABAP/4. The report is delivered
    in the standard system and is used in Transaction SCOM for the function "Send test fax".
    Only the method via the call of SAPscript with DEVICE='TELEFAX', described below, ensures the
    generation of a correct transmission request, independent of the R/3 release and of the used
    fax server solution and its configuration.
    The regular printing (for example, with NEW-PAGE PRINT ON...) on an output device created in
    the spool administration of the device class 'Telefax' does generally not work!
    REPORT RSKSENDF MESSAGE-ID SK.
    Test report to send a test fax
    sends a fax to the number <TO_CNTRY>-<TO_NMBER>
    containing an automatically generated message text.
    TABLES: USR03.
    PARAMETERS: TO_CNTRY LIKE T005-LAND1 OBLIGATORY,
    TO_NMBER LIKE TSP01-RQTELENUM OBLIGATORY,
    FROM_USR(30) TYPE C DEFAULT SY-UNAME,
    TO_RECIP(30) TYPE C DEFAULT SY-UNAME.
    SAPscript content ITAB
    DATA: BEGIN OF TEST_DOC OCCURS 10.
    INCLUDE STRUCTURE TLINE.
    DATA: END OF TEST_DOC.
    SAPscript header struct
    DATA BEGIN OF HEADER.
    INCLUDE STRUCTURE THEAD.
    DATA END OF HEADER.
    INITIALIZATION.
    get county from user addres in usr03
    system->user profile->user address
    check if not empty
    SELECT SINGLE * FROM USR03 WHERE BNAME = SY-UNAME.
    IF SY-SUBRC = 0 AND USR03-LAND1 SPACE.
    TO_CNTRY = USR03-LAND1.
    ENDIF.
    START-OF-SELECTION.
    PERFORM FILL_UP_TEST_DOC.
    PERFORM SHOW_TEST_DOC.
    AT PF08.
    PERFORM SEND_FAX TABLES TEST_DOC USING TO_CNTRY
    TO_NMBER.
    AT SELECTION-SCREEN ON TO_NMBER.
    PERFORM CHECK_NUMBER USING TO_CNTRY TO_NMBER.
    *& Form CHECK_NUMBER
    FORM CHECK_NUMBER USING
    COUNTRY
    NUMBER.
    DATA: SERVICE LIKE TSKPA-SERVICE VALUE 'TELEFAX',
    LEN LIKE SY-FDPOS.
    FIELD-SYMBOLS
    windows GUI push the ? from mandatory input instead
    of overwriting it
    LEN = STRLEN( TO_NMBER ).
    IF LEN > 1.
    SUBTRACT 1 FROM LEN.
    ASSIGN TO_NMBER+LEN(1) TO
    IF
    = '?'.
    = SPACE.
    ENDIF.
    ENDIF.
    official check FM
    CALL FUNCTION 'TELECOMMUNICATION_NUMBER_CHECK'
    EXPORTING
    COUNTRY = COUNTRY
    NUMBER = NUMBER
    SERVICE = SERVICE.
    on old 21?/22? release you may have to handle the
    exception
    because the Function uses RAISE instead of
    MESSAGE... RAISING....
    ENDFORM. " CHECK_NUMBER
    *& Form FILL_UP_TEST_DOC
    fills test text in itab TEST_DOC *
    real life example needs to get real life data *
    FORM FILL_UP_TEST_DOC.
    DATA: DATUM(12) TYPE C,
    UZEIT(10) TYPE C.
    SAPscript initialization
    of course, you may want to set a few parameter
    (FORM,LAYOUT,....)
    CALL FUNCTION 'INIT_TEXT'
    EXPORTING
    ID = 'ST '
    LANGUAGE = SY-LANGU
    NAME = 'FOO-BAR'
    OBJECT = 'TEXT'
    IMPORTING
    HEADER = HEADER
    TABLES
    LINES = TEST_DOC
    EXCEPTIONS
    OTHERS = 1.
    IF SY-SUBRC 0.
    MESSAGE A400 WITH 'INIT_TEXT'.
    ENDIF.
    PERFORM ADD_EMPTY_LINE.
    WRITE: SY-DATUM TO DATUM.
    WRITE: SY-UZEIT TO UZEIT.
    PERFORM ADD_LINES USING 'This is test Telefax'(001)
    DATUM UZEIT.
    PERFORM ADD_EMPTY_LINE.
    PERFORM ADD_LINES USING 'From: &'(002) FROM_USR SPACE.
    PERFORM ADD_LINES USING 'To: &'(003) TO_RECIP SPACE.
    PERFORM ADD_LINES USING 'Fax number: & &'(004)
    TO_CNTRY TO_NMBER.
    PERFORM ADD_EMPTY_LINE.
    PERFORM ADD_LINES USING
    'This is a test fax send by Report RSKSENDF'(005)
    SPACE SPACE.
    PERFORM ADD_LINES USING 'on SAP system & '(006)
    SY-SYSID SPACE.
    PERFORM ADD_EMPTY_LINE.
    PERFORM ADD_LINES USING
    'the quick brown fox jumps over the lazy dog.'(101)
    SPACE SAPCE.
    PERFORM ADD_LINES USING
    'THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG.'(102)
    SPACE SAPCE.
    PERFORM ADD_EMPTY_LINE.
    PERFORM ADD_LINES USING 'End of test'(007) SPACE
    SPACE.
    ENDFORM. " FILL_UP_TEST_DOC
    *& Form ADD_LINES
    printf a line an appends it in test_doc *
    --> cformat format.
    --> p1 param1
    --> p2 param2
    FORM ADD_LINES USING CFORMAT P1 P2.
    TEST_DOC-TDFORMAT = '/'.
    TEST_DOC-TDLINE = CFORMAT.
    IF TEST_DOC-TDLINE CA '&'.
    REPLACE '&' WITH P1 INTO TEST_DOC-TDLINE.
    IF TEST_DOC-TDLINE CA '&'.
    REPLACE '&' WITH P2 INTO TEST_DOC-TDLINE.
    ENDIF.
    ENDIF.
    APPEND TEST_DOC.
    ENDFORM. " ADD_LINES
    *& Form ADD_EMPTY_LINE
    appends an empty line to test_doc *
    FORM ADD_EMPTY_LINE.
    TEST_DOC-TDFORMAT = '/'.
    CLEAR TEST_DOC-TDLINE.
    APPEND TEST_DOC.
    ENDFORM. " ADD_EMPTY_LINE
    *& Form SHOW_TEST_DOC
    lists the test doc for aproval *
    *>>>> this is for fun only because PRINT_TEXT also
    offers a preview *
    FORM SHOW_TEST_DOC.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
    WRITE: / 'Test fax would look like this:'(020).
    ULINE.
    SKIP.
    LOOP AT TEST_DOC.
    IF TEST_DOC-TDLINE SPACE.
    WRITE:/ TEST_DOC-TDLINE.
    ELSE.
    SKIP.
    ENDIF.
    ENDLOOP.
    SKIP.
    ULINE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE: 'Press PF8 to send it'(021).
    ENDFORM. " SHOW_TEST_DOC
    *& Form SEND_FAX
    send fax by calling SAPscript *
    Note: Instead of using PRINT_TEXT you may also *
    call OPEN_FORM / WRITE_FORM_LINES / CLOSE_FORM, *
    this allows you to use a similar program structure *
    as with NEW-PAGE PRINT ON / WRITE / NEW-PAGE PRINT
    OFF *
    FORM SEND_FAX
    TABLES DOC2FAX STRUCTURE TEST_DOC
    USING COUNTRY
    NUMBER.
    DATA: SID(5) TYPE N.
    DATA BEGIN OF POPT.
    INCLUDE STRUCTURE ITCPO.
    DATA END OF POPT.
    DATA BEGIN OF PRES.
    INCLUDE STRUCTURE ITCPP.
    DATA END OF PRES.
    CLEAR POPT.
    POPT-TDCOPIES = 1. " one copy
    POPT-TDDEST = " done internaly by script,
    POPT-TDPRINTER = " do not fill !!!
    POPT-TDNEWID = 'X'. " do not reuse old spool request
    POPT-TDDATASET = 'TEST'(022). " fill as you want
    POPT-TDSUFFIX1 = 'FAX'(023). " fill as you want
    POPT-TDSUFFIX2 = SY-UNAME. " fill as you want
    POPT-TDIMMED = 'X'. " send now
    POPT-TDLIFETIME = 8. " keep 8 days in spool
    POPT-TDTELENUM = NUMBER. " number without country code
    POPT-TDTELELAND = COUNTRY. " country of recipient
    POPT-TDCOVER = 'test fax'(024).
    POPT-TDCOVTITLE = 'test fax'(024).
    POPT-TDIEXIT = 'X'.
    CALL FUNCTION 'PRINT_TEXT'
    EXPORTING
    APPLICATION = 'TX'
    ARCHIVE_INDEX = ' '
    ARCHIVE_PARAMS = ' '
    DEVICE = 'TELEFAX' "<<< here we say: fax it !
    DIALOG = 'X'
    HEADER = HEADER
    OPTIONS = POPT
    IMPORTING
    RESULT = PRES
    TABLES
    LINES = DOC2FAX
    EXCEPTIONS
    OTHERS = 01.
    do not bother with exception in sample code
    CANCELED = 01
    DEVICE = 02
    FORM = 03
    OPTIONS = 04
    UNCLOSED = 05
    UNKNOWN = 06
    FORMAT = 07
    TEXTFORMAT = 08
    EXTERNAL = 09.
    IF SY-SUBRC = 0.
    arriving here means we could send:
    SID = PRES-TDSPOOLID.
    IF SID > '00000'.
    MESSAGE S433 WITH SID.
    ENDIF.
    LEAVE .
    ELSE.
    do not bother with exception in sample code
    MESSAGE A400 WITH 'PRIN_TEXT'.
    ENDIF.
    ENDFORM. " SEND_FAX
    Regards.

  • Is there any function module which gives open invoices &open amount?

    Hello All,
    I want to use function module which gives open invoices with open amount.
    I know 'CUSTOMER_OPEN_ITEMS'  'BAPI_AR_ACC_GETOPENITEMS' function which gives open invoices but does not give open amount.
    Can anyone help me to find such function?

    From this BAPI ,
    BAPI_AR_ACC_GETOPENITEMS, You got amount for items in lc_amount field of lineitems table parameter.
    I hope, it will helpful to you.
    by
    Prasad GVK.

  • Function module which sort the entries in Table maintance generator

    hi
        I want to know the function module which is used to sort the entirs in table maintance genrator.
    Thanks

    Hi,
    Go to the TMG program .You can change the code there.
    Rgds,
    Anversha

  • Function Module which will take Wekk No & Return date range (from & To dat)

    Hello everyone,
    I need a Function Module which will take Week No as an input Parameter & return me the date range
    (From date & To date of that week) .
    Thanks in advance!
    Cheers!
    Moderator message: date calculation questions = FAQ, please search before posting.
    Edited by: Thomas Zloch on Nov 2, 2010 5:25 PM

    Hi,
         Please write the below logic..
    data : v_date11 type sy-datum,
              monday    type sy-datum,
              sunday  type sy-datum,
              v_count1 type i .
    *v_count1 = 20 * 7.            "   Say U want details for 20th week , or give a parameter for week and multiply with 7*
    v_date11 = '20100101'.     "   take the starting day of the year ....
    v_date11 = v_date11 + v_count1.   " add to the date
    CALL FUNCTION 'GET_WEEK_INFO_BASED_ON_DATE'   <-- call this FM
    EXPORTING
       DATE          = v_date11
    IMPORTING
      WEEK          = WEEK
       MONDAY        = MONDAY <-- will have the week starting day
       SUNDAY        = SUNDAY
    Regards,
    Srini.

  • Function module which calculates GL balances

    Hello to you all,
    I am looking for a function module which calculates balances for GL account as Tcode FS10N do.
    I would like to implement this FM in an ABAP program,
    Thanks,
    Amir

    Hi
    Check the  Code, if it could be of use to you
    http://www.sapfans.com/forums/viewtopic.php?f=10&t=317349
    Regards
    Sanil Bhandari
    Edited by: Sanil K Bhandari on Jun 29, 2011 6:17 PM

  • Function module which work as BDC

    Hi All
    Is there any function module  which works as BDC. What i expect is that, i will pass the data to be uploaded, the transaction code, update mode..etc  to that function module which execute the transaction accordindly.
    Thanks
    ravi

    You might want to check out the following function module.   It is pretty close to what you are looking for
    You pass it the tcode, mode, update val, bdcdata, and you will get the messtab back.
      call function 'ABAP4_CALL_TRANSACTION'
                   exporting
                     tcode                         = 'VA11'
                     mode_val                      = mode
                     update_val                    = 'S'
                   tables
                     using_tab                     = bdcdata
                     mess_tab                      = messtab
                   exceptions
                     call_transaction_denied       = 1
                     tcode_invalid                 = 2
                     others                        = 3.
    Please remember to award points for helpful answers and mark your post as solved when you question has been answered.  Thanks.
    Regards,
    Rich Heilman

  • What is the function module which is used to trigger email

    Hi ALL,
    can u send me the function module which has to trigger email when sales order was saved.
    kindly send me the inputs
    thanks & regards
    naveen
    Moderator Message: Basic Question. Thread locked.
    Edited by: kishan P on Nov 11, 2010 10:56 AM

    Hi,
    This needs to coded in the Save User Exit of the Sales Order Include MV45AFZZ (USEREXIT_SAVE_DOCUMENT) and use the Function Module "SO_DOCUMENT_SEND_API1" to trigger a mail.
    Please try this and let me know if any.
    Regards,
    Srinivas
    Moderator Message: Do not answer Basic Question.
    Edited by: kishan P on Nov 11, 2010 10:58 AM

  • Is there a BAPI function module which reverses the sign of an integer

    Hi Friends,
                     Could u plz tell me  a BAPI function module which can reverse the
    sign of an integer ?
    For example:       
    if i get the integer value in work area as <number> <sign> , i need to change it to <sign><number>. 
    i.e if i get the integer value in work area as    "248-" ("-" indicates minus sign) to " -248 ".
    i.e if i get the sign after the value , my requirement is to get the sign before the value.
    The actual ABAP query is:
    data: QTY_1 TYPE CHAR10,
            QTY_2  TYPE CHAR10,
            WA_DISTK_PORTLET-QUANTITY TYPE INT4.
    QTY_1 = WA_DISTK_PORTLET-QUANTITY.
                    SEARCH QTY_1 FOR '-'.
            IF SY-SUBRC = 0 AND SY-FDPOS <> 0.
              SPLIT  QTY_1 AT '-' INTO  QTY_1 QTY_2.
              CONDENSE  QTY_1.
              CONCATENATE '-'  QTY_1  INTO QTY_1.
              CONDENSE  QTY_1.
            ELSE.
              CONDENSE  QTY_1.
            ENDIF.
            CLEAR: WA_DISTK_PORTLET-QUANTITY.
         MOVE : QTY_1 TO  WA_DISTK_PORTLET-QUANTITY.
    when i move this QTY_1 to work area  quantity field The sign is coming after the numeric value.
    Note: There is no possibility to change the datatype of quantity field.
    I have tried my level best with 'CLOI_PUT_SIGN_IN_FRONT' function module.
    I will assign full points to the correct function module.

    Hi Ram,
    try this ang look into fields.
    data: fields type table of SVAL with header line.
    fields-tabname = 'MARA'. fields-fieldname = 'MATNR'. append fields.
    fields-tabname = 'BKPF'. fields-fieldname = 'BUDAT'. append fields.
    CALL FUNCTION 'POPUP_GET_VALUES'
      EXPORTING
        POPUP_TITLE           = 'Value Insert'
      TABLES
        FIELDS                = fields.
    Regards, Dieter

  • Which  Function Module is used for converting the DATE in BDC

    HI,
    Which  Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

    data : date like sy-datum.
    data : odate(10) type c.
    date = sy-datum.        " in format YYYYMMDD
    CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
      EXPORTING
       input         = date
    IMPORTING
       OUTPUT        = odate         .
    write:/ odate.  "in ur format '.
    1.
    In ur itab make a field for date as 10 characters and use this Fm to store the date .
    2. Pass the date as the charcter field to the screen and now check .

  • Is there any function module which will upload storage locations for a mat

    Hi gurus,
      Is there any function module or BAPI to extend the storage locations of material which is done through <b>MMSC</b> transaction. I need to write a program to upload new storage locations for some materials.Please advise.
    Thanks ,
    Sam.

    You can do this using the BAPI_MATERIAL_SAVEDATA
    Regards,
    Rich Heilman

Maybe you are looking for