CRM IS-Utility CRM-PME error

Hello All
This is regarding the CRM/ISU scenario.While creating and saving connection object in CRM i am getting follwoing error
_Error occurred while determining attribute (CRM <-> PME)
Regards
Noor

Hi Noor,
Please refer below SDN forum for you error.
CRM IS-Utility integration-CRM-PME error

Similar Messages

Error in Action when CRM Order is updated as Error from R/3 update

Hi,
Currently we are in CRM 6.0 SP04 and R/3 4.7 SP14
Process:
1) B2B user places order through ISA
2) Order gets replicated R/3 from CRM through middleware (Scenario A setting)
3) If there are any changes in order on either side, changes gets replicated.
Requirement:
We have a requirement from business to trigger workflow in CRM if order is in error. Following are the possible scenarios
1) Error while saving order in CRM
2) No errors in CRM. However, Order will get error in R/3 because of inconsistent configuration or master data between CRM and R/3. The BDOC will be green while replicating to R/3 and acknowledgement to CRM.
3) BDOC status is in error
Solution approach:
We created an action to trigger event when order status set to "Contains error". The condition for Action trigger are Order have error free flag NE X(BUS 2000115 ) OR Status = I1030 OR status = I1056.
Issues:
1) Scenario : Order is successfully create in CRM without any error. Order gets replicated to R/3 u2013 BDOC is green. However, the order gets error status in R/3 because of inconsistent configuration or master data. The acknowledgement BDOC updates the error status in CRM. However, Action does not get trigger when the order is updated as Error from R/3.
Pls advise possible solution and also suggest any other way to achieve the required functionality to generate workflow for CRM order updated as Error from R/3.
Regards,
Anil Rithe

Hi Anil,
Try this, implement ORDER_SAVE BAdI. This BAdI is triggered every time an order is saved, you could put in your logic to see if the order has errors, if yes trigger your workflow.
I haven't tested but this should work for your case when the crm order is set to error status after the replication to R/3(the BDOC scenario).
This may not be the most efficient method of doing, but this would definitely work.
Make sure you use proper checks at the beginning of your order_save BAdI implementation as this badi would get executed on save of every 1-order object.
~Kiran

CRM b2b IC_CRM gives communication error

Hi Guys,
CRM_IC tcode on crm 2007 gives the below error,have configured fully qualified hostname , and J2EE service is running. i have checke dthe settings in smicm . the too look fine.
Appreciate Any help .
Error when processing your request
What has happened?
The URL http://socw3s1er65.solnet.com:8000/sap/bc/bsp/sap/ic_base/main.htm was not called due to an error.
Note
The following error text was processed in the system CR5 : Exception condition "COMMUNICATION_ERROR" raised.
The error occurred on the application server SOCW3S1ER65_CR5_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CREATE_SESSION of program CL_SAM_BSP_SESSION_LAUNCHER===CP
Method: START_WORKER_SESSION of program CL_ICWC_SESSION_REGISTRY======CP
Method: ONCREATE of program CLO23UTXK1DHIM8WX0QZD2TBW2KZ9CP
Method: %_ONCREATE of program CL_O23UTXK1DHIM8WX0QZD2TBW2KZ9CP
Method: DO_INIT of program CL_BSP_PAGE===================CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP

Hello Prasanna,
Actually, the CRM Interaction Center does not have any J2EE components since CRM 4.0. CRM 2007, CRM 2006s, and CRM 2005 are fully ABAP based with no need for any J2EE components.
Also, transaction CRM_IC is deprecated and no longer supported in CRM 2007. The Interaction Center is now started via the CRM WebClient (BSP application "CRM_UI_FRAME").
Warm regards,
John

Import Fail crm 2011 to crm 2013 Legacy component issue

Hi All
We are getting issues during organization import from crm 2011 to crm 2013 , the error is
"We have detected the presence of legacy component(s) during upgrade, these components are not supported in Dynamics CRM 2013. Please refer to upgrade log file C:\Users\Administrator\AppData\Roaming\Microsoft\MSCRM\Logs\LegacyFeatureCheck.xml
for more information."
when we check log file it shows the error "ISV folder under CRM Website contains one or more files"
Even we removed everything from ISV folder , Iframe urls from app , solution which is using ISV urls ,plugins and custom workflows but still the error is same
Please help to resolve this issue .
Thank you
Sharique

Hi,
Please refer below blog having details about "Removal of the 2007 Endpoint and Legacy Features"
http://blog.simonjackson.info/2013/07/whats-changing-in-crm-2013-from-sdk.html
The following legacy Microsoft Dynamics CRM 4.0 features will be removed or will no longer be supported in the next major product release:
ISV folder support for custom web applications
Microsoft Dynamics CRM 4.0 plug-ins
Microsoft Dynamics CRM 4.0 client-side scripting
Microsoft Dynamics CRM 4.0 custom workflow activities
Also you can download a tool that can detect legacy feature on your server
http://go.microsoft.com/fwlink/p/?LinkID=309565
Entire documentation is available at below article.
http://msdn.microsoft.com/en-us/library/dn281891.aspx
Hope this helps.
Ajay Chawla

Java.util.zip.ZipException error in opening zip file

Hello all,
We are using Sun Java System web server 6.1 SP2. When I tried to deploy an application, I received this message: "Posted content length of --- exceeds limit of --- " the -dashes are the size of the file actually.
I then added an init-param to the web.xml specifying the maximum size.
After doing that, I tried to deploy the war file using administration interface, but received a network tcp/ip error. I then deployed it using command line wdeploy command. It worked but the web server won't start up after the deployment. The following error messages are found in the log file. Any thoughts as to whats wrong here? Is there a bug in SP2?
[22/Sep/2006:17:30:44] finer ( 5668): ContextConfig[search]: URI='/search', ResourcePath='/WEB-INF/sun-web-search.tld' [22/Sep/2006:17:30:44] finer ( 5668): ContextConfig[search]:
tldConfigJar(/WEB-INF/sun-web-search.tld): java.util.zip.ZipException: error in opening zip file
[22/Sep/2006:17:30:44] finer ( 5668): ContextConfig[search]: URI='/jstl-fmt', ResourcePath='/WEB-INF/fmt.tld' [22/Sep/2006:17:30:44] finer ( 5668): ContextConfig[search]: tldConfigJar(/WEB-INF/fmt.tld): java.util.zip.ZipException: error in opening zip file
[22/Sep/2006:17:30:48] failure ( 5668): CORE4007: Internal error: Unexpected Java exception thrown (java.lang.NoClassDefFoundError: org/xml/sax/ext/Attributes2, org/xml/sax/ext/Attributes2), stack: java.lang.NoClassDefFoundError: org/xml/sax/ext/Attributes2 at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:537) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1717) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:983) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1431) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1301) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302) at org.apache.xerces.parsers.AbstractSAXParser.<init>(Unknown Source) at org.apache.xerces.parsers.SAXParser.<init>(Unknown Source) at org.apache.xerces.parsers.SAXParser.<init>(Unknown Source) at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.<init>(Unknown Source) at org.apache.xerces.jaxp.SAXParserImpl.<init>(Unknown Source) at org.apache.xerces.jaxp.SAXParserFactoryImpl.newSAXParser(Unknown Source) at org.apache.catalina.util.xml.XmlMapper.readXml(XmlMapper.java:274) at org.apache.catalina.startup.ContextConfig.defaultConfig(ContextConfig.java:882) at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:1004) at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:257) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:155) at org.apache.catalina.core.StandardContext.start(StandardContext.java:3752) at com.iplanet.ias.web.WebModule.start(WebModule.java:257) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133) at org.apache.catalina.core.StandardHost.start(StandardHost.java:652) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355) at org.apache.catalina.startup.Embedded.start(Embedded.java:995) at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431) at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500) at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161) [22/Sep/2006:17:30:48] failure ( 5668): CORE3186: Failed to set configuration

ooks like you are running into bug: 4719677
When you deploy a web application using the Administration Server from a
remote machine, the maximum upload size by default is 10 MB. This can be
changed by editing the
install-root/bin/https/webapps/instance-app/WEB-INF/web.xml file. In the
servlet webappdeploy, insert an init param named maxUploadSize with a
value in bytes specifying the maximum upload size. Example:
<init-param>
<param-name>maxUploadSize</param-name>
<param-value>90000000</param-value>
</init-param>

Java.util.zip.ZipException error when building

Good Day All,
I am a newbie and this is my first JWS deployment. I have an app that I am writing in Netbeans 6.1 that I want to deploy via JWS. The app accesses five different JAR libraries and that is where my troubles started. I thought that I needed to figure a way to configure Netbeans so the libraries would be deployed with my app JAR so it would run correctly using JWS.
I was trying to get things working and now my problem is that when I build I am getting the following error:
init:
deps-jar:
compile:
Copy libraries to C:\Java\DataMed\dist\lib.
To run this application from the command line without Ant, try:
java -jar "C:\Java\DataMed\dist\DataMed.jar"
jnlp:
jnlp-init-generate-master:
C:\Java\DataMed\nbproject\jnlp-impl.xml:61: The following error occurred while executing this line:
C:Java\DataMed\nbproject\jnlp-impl.xml:386: java.util.zip.ZipException: error in opening zip file
BUILD FAILED (total time: 0seconds)Scrolling to line 386 in the jnlp-impl.xml file it says:
componentsprop="jnlp.components">I futzed with my options so much I can't seem to figure out how to get everything reset so I can get a clean build ! As a newbie to Netbeans I sometimes have difficulty figuring out where all the different things are hidden ... I **think** it all went bad when I was working on the Properties > Libraries > Compile > Compile-time Libraries but I can't remember.
So I have two questions really:
1) How can I resolve the ZipException error? I suspect it is one of the JAR libraries but how can I tell ?
2) How do I get JWS to find my five libraries ? I now suspect that I am supposed to upload the five libraries to the webserver and then in my JNLP it will have links to the libraries in the <resources> part of the code. Is that correct ?
Edited by: DBirdManAR on Aug 10, 2008 7:22 AM
Rather than spend to much time figuring this out, I just used my revert modifications through my SVN to go back to a previous version that builds correctly.

Hi,
I have the same problem but I cannot solve it.
Help much appreciated.
Regards,

Java.util.zip.ZipException: error in opening zip file Deploment Error

Hi All,
I am getting the fallowing Deployment exception while i am trying to deploy my webdynpro DC. Kindly help me if anybody know the solution for it.
deployment aborted : file:/C:/DOCUME1/291123/LOCALS1/Temp/temp7081pg.comiprscipr~dc_intreg_process.ear
Aborted: development component 'ipr/scipr/dc_intreg_process'/'pg.com'/'GGD_EPREGDEV_D'/'20101220152524'/'0':Caught exception during application deployment from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error while getting the internal libraries of application pg.com/iprsciprdc_intreg_process in operation update.. Reason: error in opening zip file; nested exception is: java.util.zip.ZipException: error in opening zip file (message ID: com.sap.sdm.serverext.servertype.i
Thanks,
Mahesh Nuli.

Hello Ram,
It is saying that the library file is missing. Can you deploy pg.com/iprsciprdc_intreg_process first and try to deploy this ear temp7081pg.comiprscipr~dc_intreg_process.ear.
Regards
Nizamudeen SM

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

Best Practices Building Blocks for CRM 5.0 & CRM 2007

Hi Experts,
Where can I find Best Practices Building Blocks for CRM 5.0 & CRM 2007?
Thanks in advance,
Vishwa.

Hi
Go to: http://help.sap.com/
Click on the Best Practices Tab,
Then Cross-Industry Packages,
Then Customer Relationship Management
They should all be under there.
Regards
Arden

Difference between SAP CRM and mySAP CRM

Hi ,
can anybody tell me the Difference between SAP CRM and mySAP CRM.
Regards,
Shaker.

Personally I have never called it mySAP CRM even though I have worked with SAP CRM since version 2.0C.
IMHO: Calling it SAP CRM + numerical version number is lot easier to understand
If you look at a CRM system the installed component could be one of the following:
BBPCRM 20C SAP CRM 2.0C
BBPCRM 300 SAP CRM 3.0
BBPCRM 310 SAP CRM 3.1
BBPCRM 400 SAP CRM 4.0 / mySAP CRM 2004
BBPCRM 500 SAP CRM 5.0 / mySAP CRM 2005
BBPCRM 510 SAP CRM 2006s(1)
BBPCRM 520 SAP CRM 2006s(2)
BBPCRM 600 SAP CRM 2007 / SAP CRM 6.0
BBPCRM 700 SAP CRM 7.0
I'm not sure about some of the other versions.. but I believe that covers most.
Take care,
Stephen

Migrate CRM opportunities from version 5.0 to CRM 7.0 CRM

Hi
How can we migrate all the CRM Opportunities from CRM 5.0 to CRM 7.0?
Regards,
Winston

OK, that makes more sense. Attached is in version 8.2, which you can open.
Attachments:
bmm212.zip ‏634 KB

Can anyone explain the main differences between CRM 2007 and CRM 7?.

Can anyone explain the main differences between CRM 2007 and CRM 7?.
Does CRM 2007 use the WebUI?.
Jason

My fault for not putting my question forward correctly.
I have worked with CRM 7 a few times now, but my experience has jumped me from CRM 5 straight to CRM 7, having never touched CRM 2007.
I now have an opening to work on CRM 2007 so I was intrigued to know what it physically looked like. I assume it does not use the WebUI interface?.
Jas

UTIL-PARAM STRING ERROR when calling a form from OAF Page

Dear Experts,
Can you please suggest, as we are getting the below error when we are calling a form from OAF page.
"UTIL-PARAM STRING ERROR"
We have created a button to call the same and the syntax used is as below.
form:PA:OLNG_MOC_PROJECTS_ENGINEER:STANDARD:PA_PAXCARVW:PROJECT_NUMBER={@ProjectNumber}
Thanks in advance,
Satish

Hi all,
I have a Personalized Button, my button call a customized form (with a parameter named TAINV_PARAM). Function of customized Form is TAINV_FORM
In OAF page, I have a text, it's values is 'TAINV', it's ID is VALUES_ATTRIBUTE (you can show source code in browser).
In Destination URL of Personalized Button, fill code to call Customized Form:
*javascript: var v_get_value=document.GetElementById(VALUES_ATTRIBUTE).innerHTML;openWindow(top, 'OA.jsp?OAFunc=TAINV_FORM&TAINV_PARAM'+v_get_value,null, {width:750, height:550},false, 'dialog', null);void(0);*
Regards,
TAINV

Webb Exception - java.util.zip.ZipException: error in opening zip file

          I am tring to run my Servlet with myWAR.war. So I started first installing the CookieCounter example that came with weblogic, I did exactly as the document said but I getting the following exception:
          Thu Jan 04 11:26:45 MST 2001:<E> <HTTP> Error reading Web application '/weblogic/myserver/cookieWar.war'
          java.util.zip.ZipException: error in opening zip file
          at java.util.zip.ZipFile.open(Native Method)
          at java.util.zip.ZipFile.<init>(ZipFile.java:69)
          at weblogic.utils.jar.JarFile.<init>(JarFile.java:57)
          at weblogic.utils.jar.JarFile.<init>(JarFile.java:44)
          at weblogic.t3.srvr.HttpServer.loadWARContext(HttpServer.java:582)
          at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code)
          at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
          at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
          at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
          at java.lang.reflect.Method.invoke(Native Method)
          at weblogic.Server.startServerDynamically(Server.java:99)
          at weblogic.Server.main(Server.java:65)
          at weblogic.Server.main(Server.java:55)
          at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
          at java.lang.Thread.run(Thread.java:479)
          Has anybody encountered the problem before I created the jar using jar cvf cookieWar.war cookie- under the command line


I have seen problems like this in the past. When you create your war file, try using "jar
          cv0f" so that the jar file won't be compressed...
          mark bouchard wrote:
          > I am having this same error... the strange thing is i have two different ear files...
          > one of them works, the other doesn't. there are NO differences between them according
          > to Araxis Merge... both will deploy, and both show servlets as being registered,
          > but i can only call the servlets from one...
          >
          > what is BEA's suggested way of creating an ear file? on NT and on UNIX please....
          >
          > use the java.util.zip methods? or use a utility like jar or winzip? Personally,
          > i've found this deployment to be HIGHLY flakey at best.... my same ear files
          > deploy perfectly with iPlanet's app server.
          >
          > Mark Spotswood <[email protected]> wrote:
          > >I think this is basically the same as a file not found error.
          > >The error message says it can't open the file. Its looking
          > >for the file under: /weblogic/myserver/cookieWar.war
          > >Make sure the file is in that directory/readable, etc.
          > >--
          > >mark
          > >
          > >Paul Garduno wrote:
          > >
          > >> Just to let you know, I am getting the same error message. I haven't
          > >worked on it but hope to at some point. I would like to know if the
          > >Weblogic people have seen this error.
          > >>
          > >> Paul Garduno
          > >>
          > >> bionic99 wrote:
          > >>
          > >> > I am tring to run my Servlet with myWAR.war. So I started first installing
          > >the CookieCounter example that came with weblogic, I did exactly as
          > >the document said but I getting the following exception:
          > >> > Thu Jan 04 11:26:45 MST 2001:<E> <HTTP> Error reading Web application
          > >'/weblogic/myserver/cookieWar.war'
          > >> > java.util.zip.ZipException: error in opening zip file
          > >> > at java.util.zip.ZipFile.open(Native Method)
          > >> > at java.util.zip.ZipFile.<init>(ZipFile.java:69)
          > >> > at weblogic.utils.jar.JarFile.<init>(JarFile.java:57)
          > >> > at weblogic.utils.jar.JarFile.<init>(JarFile.java:44)
          > >> > at weblogic.t3.srvr.HttpServer.loadWARContext(HttpServer.java:582)
          > >> > at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
          > >Compiled Code)
          > >> > at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
          > >> > at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
          > >> > at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
          > >> > at java.lang.reflect.Method.invoke(Native Method)
          > >> > at weblogic.Server.startServerDynamically(Server.java:99)
          > >> > at weblogic.Server.main(Server.java:65)
          > >> > at weblogic.Server.main(Server.java:55)
          > >> > at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
          > >> > at java.lang.Thread.run(Thread.java:479)
          > >> >
          > >> > Has anybody encountered the problem before I created the jar using
          > >jar cvf cookieWar.war cookie- under the command line
          > >

Upgrade from CRM 2011 to CRM 2015

Hello,
Can we upgrade from crm 2011 to crm 2015 without going to crm 2013? If yes, Can you please let us know the steps involved, very briefly?
Can I import organisation from crm 2011 to crm 2015?
thanks,
Red

Hello,
Unfortunately you can't. Recheck
this article.
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

CRM IS-Utility CRM-PME error

Similar Messages

Maybe you are looking for