CRM4.0: Add a text note at a PC-UI page

Hi,
I want to add a text note to a PC-UI page. The text should always be the same for every business transaction and therefore not be added as separate field.
Is there a possibility to add a constant text note (150 char), without defining a new field (e.g. EEWB)? How to do this?
Regards
Jochen

Hi
This should definitely work. Please verify the steps that you carried out for this. Add your event to the tabpage group. All you need to do is delete this event in the interface method check_active_tabstrip when the value expected is not available.
Also make sure you trigger the check_active_tabstrip method on change of your values. For example, if its a scenario based on field, in the fieldgroup structure check the attribute send request. Put a breakpoint in method check_active_tabstrip and see if its getting trigerred and if it triggers check for your event in the table CT_TABSTRIP. Hope this helps.
Regards
Karthik
Edited by: karthik kuppuswamy on Feb 13, 2008 11:29 PM

Similar Messages

Add Freight Text Note for Order Confirmation

Hi All,
In situations where we charge actaul freight and override the upfront % pricing calculation, we need to add a Freight Text to the Order Confrimation where Inside Sales can enter something like "Freight to be determined" on the Order that will be displayed to the Customer.
How do we do that...kindly let me know the steps
Thanks
Ravi

HI,
Let me tell you my understanding of your requirement. you want to add a note ' freight to be redetermined' in your order confirmations, am i right?
If yes, configure a text type in header level with description' Freight'
assign it to the procedures and assign it to document type.
Now when you need to redetermine the freight then maintain a text message in that text type in header level.
In the print program you need to check for this text type, if some thing is written here it gets printed on the place where you specify on the out put.
Hope this will help you,
Venkat Cheedalla

Feature request: text notes for catalog and photos

I would like to have ability to add plain text notes — to whole catalog, to separate directories and to a single photo.
When I'm sitting with a client and walking throung photos, he often says something like: «Let's pick this photo but change color to blue and paint out hands». Now I have to pencil it, but why not to add a field to Lightroom DB for this kind of notes?
And a directory notes. I'm storing different photosets in different directories, there are a lot's of them, and sometimes it's hard to remember what kind of developement I've planned for this set.
By the way, it would be be great to mark directories with sone kind of color and/or rating. Maybe «ready to publish», «developement in progress», «just picked» etc.

Hi Alex,
I'm glad you found a solution for the per-photo notes.
Maybe in a while somebody will write one to handle per-folder notes. In fact, if I were to do it, it would just be a simple Lightroom Dialog Box that reads/writes a text file in your folder directory. And, if I do, I'll make sure the filename is configurable, so you could get a head start .
You would have to close the dialog box though to do anything else in Lightroom, then re-open to re-edit, and so forth... - do you think that would work for you?
Similarly for the catalog notes.
Rob

Why does my page loose formating when i add a text link on an image box?

I wanted to make my own nav with texts links. but i wanted to put the nav on an image like a black box. when i add the text and then link them to pages they started to work when i previewed them in iweb. But when i uploaded it to my ftp it messed up the formating on my page! So I tried to add a new text box without a link on the same image... now it doesn't even show up. What is the general rule of text on images? all i want to do is make a text nav on the image. Also i have made sure the image is sent back and the text to front.

I don't know if you've fixed them since michaelfromrochester's suggestion but all of the links are white with green rollover for me now.
If you haven't fixed them the clear your browser's cache (Command+Option+E for Safari) and reload the site.
OT

Add plain text files or notes to ipod 4th generation??

I was wondering how to add plain text files or "notes" to my ipod. It says I should have a "Notes" tab on my iTunes, but I don't. I've tried enabling the disk use but it didn't change anything. What I need is to add some word files onto my ipod if thats possible.
THANKS
Sarah

I haven't tested myself but after you open disk space you drag the file into your ipod?

I keep notes on about 300 topics on iPad Notes. Occasionally, when I go into an existing note to add details, the note cuts out when I begin to add text. This is now happening every day. How do I fix this?

I keep notes on about 300 topics on iPad Notes. Occasionally, when I go into an existing note to add details, the note cuts out when I begin to add text. This is now happening every day. How do I fix this?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

How can I add a text( In CRM 2007 called Note) to the current entity?

Dear Friends,
I want to add text type 'SU99' with text 'Hello World' to a CRM transaction, how to do this by BOL? Is there any example component for this issue?
Thanks and best regards,
Anders

Hello Anders,
here a piece of code where we add a text from type S002 to the Servicerequest:
lr_bt = lr_bt_adminh->get_related_entity( iv_relation_name = 'BTHeaderTextSet' ).
      lr_bt = lr_bt->create_related_entity( iv_relation_name = 'BTTextHAll' ).
      lr_bt->set_property( iv_attr_name = 'TDID'
                                iv_value = 'S002').
      lv_conc_lines = 'called Tel.'(003).
      CONCATENATE lv_conc_lines lv_phone_no into lv_text.
      lr_bt->set_property_as_string( iv_attr_name = 'CONC_LINES' iv_value = lv_text ).
      lr_core->modify( ).
I hope this helps.
Kind regards
Manfred

How do I add a text box to an ibook?

How do I add a text box to an ibook page?

Not very user-friendly IMHO, but ok here goes:
Place a picture of the band in your body background's CSS
with repeat:
no-repeat. Then add a scrolling division to your html page -
like so:
<div align="right">
<div style="font-family:'Verdana', 'Arial', 'Sans-serif';
font-size:12px;
color:#FFFFFF; text-align: left; background-color:#000000;
border:2px solid;
overflow: auto; padding:10px; width:auto; height:200px;
border-color:
#333333;"><h3>Your heading goes
here</h3><br><br> More text goes
here<br><br> and more text goes
here...</div>
<p> </p>
<div style="font-family:'Verdana', 'Arial', 'Sans-serif';
font-size:12px;
color:#FFFFFF; text-align: left; background-color:#000000;
border:2px solid;
overflow: auto; padding:10px; width:auto; height:200px;
border-color:
#333333;"><h3>Your heading goes
here</h3><br><br> More text goes
here<br><br> and more text goes
here...</div>
</div>
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"strippedman" <[email protected]> wrote in
message
news:g4h1ac$pqh$[email protected]..
> I'm looking more for something like this:
>
> www.muse.mu
>
> See how there's essentially a picture of the band in the
background and
then
> two text boxes with scrolling capability on the right?
That's all I
want...two
> locked scrolling text boxes on a picture...without using
flash.
>

How to add new text and an empty space before a file name with Automator

I can create a new service to add to multiple files some text before the file name but I need to add even an empty space; e.g. file name original becomes: new text(space)file name original. The aim is to add this text and space to multiple files.
I hope to be understood. Please can somebody help me?
Thanks

This is an old Apple-supplied AppleScript that will do the job.
IMPORTANT: note the conditions of use: it will choose the frontmost Finder window to operate on. Therefore, open the folder you want to change the names of and make it the front finder window BEFORE running the script.
Add to File Names
This script is designed to add a prefix or suffix to files in the front window of the desktop.
If no folder windows are open, the script will affect items on the desktop.
Copyright © 2001–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
--March 2014: Changes by Phil Stokes to make the script work on 10.9
--these changes are simply reversing the order of parameters in the lines that have "copy" in them
-- The following line is disabled due to a Menu Manager bug
--set the source_folder to (choose folder with prompt "Pick the folder containing the files to rename:")
try
          tell application "Finder" to set the source_folder to (folder of the front window) as alias
on error -- no open folder windows
          set the source_folder to path to desktop folder as alias
end try
set the prefix_or_suffix to ""
repeat
          display dialog "Enter the prefix or suffix to use:" default answer the prefix_or_suffix buttons {"Cancel", "Prefix", "Suffix"}
          copy the result as list to {button_pressed, prefix_or_suffix}
          if the prefix_or_suffix is not "" then exit repeat
end repeat
set the item_list to list folder source_folder without invisibles
set source_folder to source_folder as string
repeat with i from 1 to number of items in the item_list
          set this_item to item i of the item_list
          set this_item to (source_folder & this_item) as alias
          set this_info to info for this_item
          set the current_name to the name of this_info
          if folder of this_info is false and ¬
                    alias of this_info is false then
                    if the button_pressed is "Prefix" then
                              set the new_file_name to the (the prefix_or_suffix & the current_name) as string
                    else
                              set the new_file_name to the (the current_name & the prefix_or_suffix) as string
                    end if
                    my set_item_name(this_item, the new_file_name)
          end if
end repeat
beep 2
on set_item_name(this_item, new_item_name)
          tell application "Finder"
--activate
                    set the parent_container_path to (the container of this_item) as text
                    if not (exists item (the parent_container_path & new_item_name)) then
                              try
                                        set the name of this_item to new_item_name
                              on error the error_message number the error_number
                                        if the error_number is -59 then
                                                  set the error_message to "This name contains improper characters, such as a colon (:)."
                                        else --the suggested name is too long
                                                  set the error_message to error_message -- "The name is more than 31 characters long."
                                        end if
--beep
                                        tell me to display dialog the error_message default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                                        copy the result as list to {button_pressed, new_item_name}
                                        if the button_pressed is "Skip" then return 0
                                        my set_item_name(this_item, new_item_name)
                              end try
                    else --the name already exists
--beep
                              tell me to display dialog "This name is already taken, please rename." default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                              copy the result as list to {button_pressed, new_item_name}
                              if the button_pressed is "Skip" then return 0
                              my set_item_name(this_item, new_item_name)
                    end if
          end tell
end set_item_name

How to add an image or static text in the header of EACH page of a cross-Tab report

Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.

Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald

To add a Text field in Standard Transaction

Hi..
i want to add a Text field for a email address in BP transaction Address tab and want to update that in to a data base table So can we suggest User Exit and BADI for the Updation if Any or give the the process to over come this issue

Hi,
You have not mentioned the version you are using (assume its 5.0 or lower). Also, do you want to add a custom field & also programatically update it? If you want to add a custom field , you can use EEW.
But, from what you have written, I have a feeling that you can use some of the (existing) standard fields. What is your exact requirement.
Regards,
L

Is it possible to add a text box to an image in Aperture?

is it possible to add a text box/caption to an image in Aperture? (I do NOT have photoshop)

Do you want to write it directly onto the image? Then install and use the free BorderFX plug-in for Aperture. It will let you write text annotations directly onto the image or onto a border.
Regards
Léonie
You can download BorderFX for Aperture from here: http://www.iborderfx.com/BorderFX

How can I add the text from a Word document to an existing PDF that is my letterhead?

I have a business letterhead created to a PDF file. I'd like to add text from letters to this letterhead but do not know how. Please help.

Hi tatestar1,
You would either need to use Acrobat to edit your letterhead PDF, or add the text in whatever application you used to create the letterhead in the first place, and then re-create the PDF. If you have the source file, then the latter may be easier.
Best,
Sara

Add New Text - Adobe Acrobat 9.0 Pro

I have scanned in two documents to my Adobe Acrobat 9.0 Pro and now would like to add some text. When I try to select the TouchUp Text Tool it is "grayed out"; in fact the whole Advanced Editing Tool Bar is "grayed out".
I can go to the spot where I want to "add text" and hit control and right click and draw a box, but the New Font dialog box does not drop down?
Can anyone please help or shed some light on what I'm doing wrong?
Regards, June E. Hudspeth
Thank you so much.

I have just re-scanned my document unclicking the "PDA/A Compliant" box and "viola" everything appears to working just "wonderfully"!
Thank you so much for ending two days of total frustration!
I also talked with an instructor who taught the Adobe 8 class & he didn't have a clue as to what was wrong.
Again, I thank you very, very much!
Regards, June E. Hudspeth

Why is the text not the visible in the protected PDF opened on Mac?

Long story short:
I've created a document in Microsoft Word 2010 and saved it as PDF. With the .pdf open now in Acrobat Reader 9.4.1 I have enabled the protection over the .pdf file by only allowing Printing and saved the protected .pdf. All of these actions are made on Windows 7 machine. Now when trying to open the protected .pdf on Mac (with Snow Leopard 10.6.6 and Preview) the .pdf opened only shows the lines and bullets but not the text.
Why is the text not visible in the protected PDF opened on Mac?
(is this bug or a "feature"?)
Note: the protected .pdf looks good on Windows 7 and it works on Mac if the .pdf has no protection.
Thanks!

A. What application are you using to add the protection? Reader cannot add any file security and I don't think the PDF feature of Word will either.
B. Mac Preview has issues with PDF standards so there may be some features that you will experience issues with that have no workarounds.
C. Have you checked the file after adding security to see if all fonts are embedded?

CRM4.0: Add a text note at a PC-UI page

Similar Messages

Maybe you are looking for